Change ECN using CCAP_ECN_MAINTAIN

Hi Dear,
I have a requirment where ECN data needs to be changed using BAPI..CCAP_ECN_MAINTAIN.
following are the parameters passing while calling
CALL FUNCTION 'CCAP_ECN_MAINTAIN'
EXPORTING
change_header = I_ change_header( passing Change No only)
object_mat = I_object_mat (Active =X)
FL_COMMIT_AND_WAIT = ' X'
FL_SYNCH = 'X''
TABLES
objmgrec = T_objmgrec (CHG_OBJTYP =4,BOM_STD_OBJECT = Material NO,MATERIAL = Material no)
It is throwing an exception " processing canceled"
Please let me know do i need to pass any other parameters while calling this BAPI.
Thanks in advance,
Regards,
Vji

Hello Siddhartha ,
Could you please tell me what is the use of flag FL_SYNCH ??
Many Thanks,
Jitendra

Similar Messages

Change in Useful life of asset in mid year, but the previous posted depreciation should not be changed

Dear Experts,
I have a requirement in one of my client, We need to extend the useful life of asset in mid of an asset fiscal year and the depreciation which was posted in the previous should not be changed.
Requirement:
Useful life of asset is to be extended after completing depreciation for 4 years and in-between the current asset fiscal year. Provided the present asset value has to be taken as the new book value of the asset and the depreciation posted henceforth to be posted based on the new asset value till the remaining useful life.
Previously posted depreciation should be unchanged.
Analysis:
1.      The fiscal Year followed - October to September.
2.      The useful life of asset will be changed, and the depreciated value posted till 31/mar 2014 will have the old depreciation value ( based on the original acquisition value)
3.      The Depreciation key used in of type LINR (linear), depreciation value will be calculated based on the Book value till the asset value becomes ZERO at the end of useful life of the asset.
4.      We can change the useful life of the asset at the end of a Asset fiscal year say FY- 2014, if this is done the existing configuration will take the Book value of the asset at the end of the Fiscal as the asset value and the new depreciation will be calculated based on the new useful life of the asset. The asset value will become ZERO at the end of the newly changed Useful Life.
5.      But the requirement is that the useful life of the asset will be changed exactly half way in between existing Asset fiscal (i.e., 31/03/2014), if this is done system will change the depreciation value based on the new useful life ( since the Dep Key is LINR), but the depreciation value will change from the fiscal start say October 2013 to September 2014 ), which will not satisfy the requirement of the client. Since the depreciation which is already posted from October 2013 to March 2014 should not be changed.
Note:
1. We are not willing to retire the asset and create a new asset with the remaining book value as asset value and start depreciation.
Kindly let me know if the requirement can be fulfilled without retiring the asset.

Dear All,
This requirement has been completed.
1. I created New Multi level valuation method with base 26 ( Net book value w/o Revaluation ).
2. New depreciation key was created and the above method was assigned to it. I never changed the Base method.
3. new interval was created in the depreciation area, with this created dep key and extended the useful life of the asset. The depreciation was calculated according to the requirement.
Originally the asset had useful life of 5 Years, I changed the asset useful life to 8 years now with new Depreciation key 2001.
Depreciation was already posted to the asset till 04- 2013 for an amount of 148.27 SAR.
Net Book value carried forward to 2013 = 1575.56 SAR
Depreciation already posted till 4th period =   148.27 SAR
Current Net book value after useful life extension           = 1427.29 SAR .
Now the new depreciation key 2001 with Multilevel method 201, will take this Net-book value as Asset value and will depreciate along the useful life of the asset till it becomes zero.
Planned depreciation of 2013 ( remaining 6 months) = 166.24 SAR
Planned depreciation of 2014 = 225.96 SAR
Planned depreciation of 2015 = 225.96 SAR
Planned depreciation of 2016 = 225.96 SAR
Planned depreciation of 2017 = 225.96 SAR
Planned depreciation of 2018 = 225.96 SAR
Planned depreciation of 2019 = 131.25 SAR
Total      = 1427.29 SAR ( the Asset value becomes zero at the end of its remaining useful life.
The previously posted depreciation from 01.01.2013 to 30.04.2013 was untouched.

HOW TO CHANGE THE USEFUL LIFE FOR MORE ASSETS AT A TIME FOR ASSET CLASS

Hi All,
Asset which is under Asset Class Support system-B700. Here every thing is ok but the problem in USE FULL LIFE which is come by default. It must be 4 instead of 5.   So can any body help me out from this how to change the Useful life in that Asset class. In that Asset Class we have the morethan 200 Assets. It was happend in Prdocution system so now the problem is where i can change the useful life for the asset class either in DEV or PRD.
       Also i want to know the information of How these assets are Uploaded into the system (Lsmw or etc). this is very urgent for me.
Thanks in Advance,
Regards,
Siva.

Hi Ashok,
     Can i know the reason how it was happend. i mean instead of 4 years the system showing is 5yesrs any reason is there behind that.
Thanks in Advance.

Changing quantity using bapi_salesorder_change function

hi ,
i am changing quantity using 'bapi_salesorder_change' function.what are the minimum parameteres that needs to be passsed to the function.i am not able to change the quantity for some items.also for some sales orders i am not getting any error message but commit work is not working.
thanks ,
nitin

Hi Nitin,
After you call the BAPI_SALESORDER_CHANGE, specifically call BAPI_TRANSACTION_COMMIT , as BAPI_SALESORDER_CHANGE does not run a database commit.(as per the documentation provided by SAP for BAPI_SALESORDER_CHANGE)
Thanks
Lakshman

I am no longer able to change songs using my headphones

After updating to iOS 6.0 on my iphone 4S I am no longer able to change songs using the headphone controls and when i double click on the home button it no longer allows me to turn my music on and off without unlocking the screen and going into the music app on the phone.
Any ideas why this is? Is it a known bug?

Start by opening Disk Utility, from Applications > Utilities, then select the internal storage MacIntosh HD, and then Repair Permissions. You should see some printer libraries noted as having the wrong permissions, that may be part of the problem.
Be sure you have the latest printer/scanner drivers installed by going to the Canon site and download the latest available.
You can also try using the Mac OS X built-in scanning software by going to Applications > Image Capture and see if that handles the scanning for you - works great with my Epson scanner.

Look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

look for a progarm that will let me have 2 moniters but one will lock on and will not change when using spaces

ok so i have one moniter to the right of me and i want to keep my google chrome on that one but still be abel to use space on the many monter. cuz when you go to spaces it movies both moniter i hope that help and i hope that you can help me.

I have iMac osx version 10.8.5 and i forgot my account login password. i can't change it using my apple ID nor i remember my password.also my fire vault is not on and my keychain won't help. PS i can't also use the terminal idea it always not found.help

have iMac osx version 10.8.5 and i forgot my account login password. i can't change it using my apple ID nor i remember my password.also my fire vault is not on and my keychain won't help. PS i can't also use the terminal idea it always not found please help !!

You need to restart the iMac and hold down the Command and R keys immediately.
You will then have the utilities drop down and you choose Terminal
When Terminal opens, type exactly:
resetpassword
and press Return.
When the Reset Password window opens, select the user for which you want to change the password.
Enter the new password twice, and then click Save.
Accept the next dialog window,
And then Apply
When finished click the apple at the left side of the menu bar, and the Restart.

Bambus - A small and simple GTK Gui to change Wallpapers using feh,...

It is a old project, which I wrote a year ago.
Bambus - A small and simple GTK Gui to change Wallpapers using feh, Esetroot, hsetroot, habak or any other command tool.
Aur package: bambus
To restore a Wallpaper at a WM start-up (Openbox, Awesome,...) execute the command
bambus -restore
To restore a Wallpaper randomly execute
bambus -any
To restore Wallpapers in a special order execute
bambus -each
Screenshots:
Last edited by ying (2010-11-10 06:35:06)

Hey thx a lot for your posts.
@ApotheoZ: Hmm I don't know where I got them from(Take a look at wallbase.com). But I'll load it up for you.
Last edited by ying (2010-11-10 16:36:26)

Change of use of equipment

Hi Experts
The structure of our group made up of several companies esr (Technical), each company is composed of several teams assigned to it, if we seek a procedure on SAP to track the change in the allocation of such equipment between companies
Currently, we modify the plug equipment directly (Changing the Division location, Company, Computer technical and business area) to trace the change of use.
Thinks in advance

OK , Let me give an example
initial state
Functional Location 1 = Company 1
The Car 1 is assigned as a Functional Location 1
Functional Location 2 = Company 2
Is there a procedure in which SAP can track and trace the change in the allocation of the company to a company without going through two direct editing of the plug equipment??????
State final
Functional Location 1 = Company 1
Functional Location 2 = Company 2
The Car 1 is assigned as a Functional Location 2
Thainks

Regarding changing and using

Hello experts:
    First thank you in advance for all your replies.
    would you please explain the difference of changing and using preferably by an example?
    couldn't thank you more.
Best regards.
Frank

Hi,
USING and CHANGING in PERFORMS means like this.
USING- Call by value
CHANGING- Call by reference
Check the example below.
PERFORM conv_atinnnam_no USING l_refbatch CHANGING w_refbatch.
FORM conv_atinnnam_no USING    p_name
                      CHANGING p_no.
CALL FUNCTION 'CONVERSION_EXIT_ATINN_INPUT'
       EXPORTING
            input = p_w_name
       IMPORTING
            output = p_w_no.
ENDFORM.                    " conv_atinnnam_no
The parameters passing under USING will not change if the corrosponding parameter in the FORM changes unless it is global variable. But in case of parameter under changing what ever changes we are making inside FORM will be reflected to Original variables.
In case of global variables USING and CHANGING works in
the same way.
Thanks,
Vinod,

Is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?

As per the title is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?
We have a case where very rarely an item might have been miscategorised so the brand is manually changed. We want this dimension to be rigid to speed up ProcessUpdate.
We do a ProcessFull each night, so it will get corrected then, but during the hourly updates we would just like to ignore this error if possible?

Hello,
The rigid relationship should be defined when the members will not change over time. Here are some threads regarding rigid relationship for your reference, please see:
Processing OLAP Cube: http://social.technet.microsoft.com/Forums/sqlserver/en-US/17a55593-9543-404e-a579-0a011965585d/processing-olap-cube?forum=sqlanalysisservices
Flexible and rigid relationship: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d8f5443-065d-4485-9385-6f0b5fa417da/flexible-and-rigid-relationship?forum=sqlanalysisservices
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.

How can I change passwd using CLI

How can I change userpassword using iPlanet Delegated Administrator v1.1 Command Line Utilities?
(imadmin user modify ... -A userpassword:MyNewPasswd

In SIMS 4.0
1) You know uncrypted password / setup a new one:
imadmin modify user ... -W user_passwd
2) You know crypted string:
imadmin modify user ... -A userpassword:{crypt}a1vDyDPBLgTU2
For both, you need administrative privileges.
R.

Change pricing using FM

Hi experts
I need change the pricing of an exiting order.
I would do this using the FM CRM_ORDER_MAINTAIN but it doesn't work....
Can anybody show me the right code for change princing using this FM??
best regards
Marco

Hi try this and let me know if fulfills your needs
ls_pridoc_tab-stunr = ln_cond-stunr.
ls_pridoc_tab-zaehk = ln_cond-zaehk.
ls_pridoc_tab-waers = ln_cond-waers.
ls_pridoc_tab-kbetr = '70'.
INSERT ls_pridoc_tab INTO TABLE lt_pridoc_tab.
ls_pridoc-ref_guid = ln_cond-kposn.
ls_pridoc-cond_change = lt_pridoc_tab.
INSERT ls_pridoc INTO TABLE lt_pridoc.
ls_input_field-ref_guid = ln_cond-kposn.
ls_input_field-ref_kind = 'B'.
ls_input_field-objectname = 'PRIDOC_COM'.
ls_field_name-fieldname = 'KBETR'.
INSERT ls_field_name INTO TABLE lt_field_name.
INSERT ls_input_field INTO TABLE lt_input_field.
REFRESH lt_field_name.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
   EXPORTING
     it_pridoc       = lt_pridoc
   CHANGING
     ct_input_fields = lt_input_field.
IF sy-subrc EQ 0.
   ls_header_guid = guid.
   APPEND ls_header_guid TO lt_header_guid.
   CALL FUNCTION 'CRM_ORDER_SAVE'
     EXPORTING
       it_objects_to_save = lt_header_guid
     IMPORTING
       et_saved_objects   = gt_saved_objects.
   COMMIT WORK.
ENDIF.
Bye
Il gemello disperso

Mass Change of Uses in Quality Plan

Dear SAPians,
How can we make a mass change in uses ( i.e. from '05' to '03' in Quality plans ) other then a use of LSMW.
Thanks.

Dear Atul,
It think if you are trying to copy the plan with CWBQM, don't try it. It will not work like that.
But yes if you want to change any field of the inspection plan in mass it will work perfectly.
You asked to change the usage of the inspection plans in mass, then it will surely work.
Current Working Are: It defines.........
- Which focus is to be used, that is which object type the selection criteria refer to.
- Which object types can be displayed and processed.
- Whether objects are automatically locked for changing by other users, and which objects these are.
You can select any of the Wrok Area
"Q_OPR_000000000010" Will have the focused are at Operation level of the Inspection plan and will lock the Operation level data for the Task list while you will be executing the workbench. at the other hand "Q_TSK_000000000010" will have focus at Header level data only and will lock the Header level details while working at CWBQM.
Now it you have to decide what you want to do If you need only the operation level details to be locked for the Inspection plan and go with Q_OPR_000000000010 and If you wish the entire task list get locked, no one should access the task list from header level it self during the CWBQM execution, go with Q_TSK_000000000010.
Don't put any data at "BASIC Selection Criteria"
Where you have enter the task list type "Q", see just above this section, there is a Button "ADDITIONAL SELECTION CRITERIA" is there, click on it and you will have more selection fields available.
To change (Again I will say to change not to Copy) the details at MIC level don't execute the "Load Task list" instead press "Ctfl + F7"
Regards,
Shyamal

Change ECN using CCAP_ECN_MAINTAIN

Similar Messages

Maybe you are looking for