Change EKPO-KZWI6 in Batch input
Hi experts.
I'm creating a PO in ME21 via batch input and need to change the field EKPO-KZWI6, but I can't find this field in the transaction screens.
How would you guy suggest me to do it?
Thanks in advance,
Alm.
Hi
That is a field for the subtotal of the pricing, so it's not available in the screens:
here the system save a subtotal of a certain number of conditions: the rule is decided in the customizing of the price.
So you need to change those conditions in order to modify your field
Max
Similar Messages
-
Is it possible to maintain a view vai Batch Input
Hi guys,
The user required to develop a BDC program to upload the data source from outside of SAP, and maintain these data into a view via Tcode: SM34. But it seems the view doesn't support Batch input.....
Can anybody tell me, is it possible to maintain a view via Batch input? Many thanks!
Brian LiuAdditional information:
This requirement is to upload the Overhead Rate data from outside of SAP, and maintained via KZM2 or SM34. But when I tried to record a BDC for KZM2, it seems that the SAP can not support batch input.
I find a SAP note 208474, it says:
Symptom
Overhead rates of the costing sheet of the overhead rates, which have been created, changed or deleted via batch input or Call Transaction, are not saved.
The same rates are saved if processing is carried out via Transaction KZZ2 or the Implementation Guide IMG.
Cause and prerequisites
Processing the Customizing transactions for maintaining the overhead rates of the costing sheet (Transaction KZZ2, KZM2) is
not supported in the batch input. This corresponds to the SAP standards according to which Customizing transactions in general need not necessarily be capable of batch input.
The batch input data of the overhead rates are not saved in the standard because processing is terminated by a COMMIT WORK. This statement ensures that the internal tables for the transport of the overhead rates are only deleted if their transfer to the database tables to be transported has been processed successfully.
Solution
The subsequent modification allows batch input processing of the overhead rates, by suppressing the COMMIT WORK statement. As a result of the modification, the tables in the transport request of the overhead rates may be incomplete in single cases.
In cases where the overhead rates have not been transferred completely to the target system after implementation of the modification, include the overhead rates again in a transport request, repeat the transport and, if necessary, subsequent processing.
Note that the attached modifications are not and will not be included in the R/3 standard system.
I modified the sap standard program L0COEF04 according to another SAP note 150041, but after the modification, I still couldn't record the BDC.
Anybody who have ever met the same situation, or can give me some suggestion? With many thanks!
Brian Liu -
VL02N Batch INPUT, change field LFIMG
HI gurus,
On a selection screen i have those:
parameters: p_vbeln
select-options: s_posnr
parameter: p_lfimg
I did a BATCH input on VL02N on a delivery that has 2 items. When i'm trying to change the delivery quantity using the parameters and the select options on the selection screen i can't modify the field LFIMG with the value of parameter p_lfimg.
PERFORM bdc_dynpro USING 'SAPMV50A' '4004'.
PERFORM bdc_field USING 'BDC_CURSOR' 'LIKP-VBELN'.
PERFORM bdc_field USING 'BDC_OKCODE' '=ENT2_T'.
PERFORM bdc_field USING 'LIKP-VBELN' <b>wa_lips-vbeln. </b> "aici
PERFORM bdc_dynpro USING 'SAPMV50A' '1000'.
PERFORM bdc_field USING 'BDC_OKCODE' '=SICH_T'.
PERFORM bdc_field USING 'LIPS-POSNR' wa_lips-posnr.
PERFORM bdc_field USING 'BDC_CURSOR' <b>'LIPSD-G_LFIMG(01)'.</b>
PERFORM bdc_field USING 'LIPSD-G_LFIMG(01)' p_lfimg. "aici
THE PROBLEM is that vl02N modifies only the field 01 , although i want to modify the quantity for the position posnr that i've selected in select-options. How can i tell SAP to go and modify delivery quantity for the position that i;ve selected in select-options?
Pls help.Previous answer was copy pasted from LSMW loading multiple structured records..
-
PO creation using LSMW through batch input method
Hi, I am new to working with LSMW and i have completed a project for creating purchase orders using the direct data input method. I need to do the same using batch input method, however in the maintain structure relationship step, it is only allowing me to assign one structure to the recording that i have done, however in po creation we need separate (nested) structure for header and line item, could anybody help me past this please?
Hi Rudra!
OK, now you just know, why you have only one line, not multiple PO item lines. To get a dynamic number of items, you need a complex program - just like standard direct input.
If you need a field, which is not part of this program, don't try to write your own program for batch input - it's just to much work before you have a good result.
You can use Bapi method instead with BAPI_PO_CREATE1. This can handle a lot of fields and there is some documentation available how to fill the Bapi.
If this looks to complicated in the first moment, think about creation of POs via direct input and a small batch recording to change your additional field(s) afterwards. (You can select EKPO table to generate list of 'wrong' migrated orders for input in LSMW.) Use field 'Item' in the bottom of ME22 to position your desired line in first screen line, just change one PO-line after one other (every time a 'save' -> no problem with different number of lines / PO).
Regards,
Christian -
Batch input of a list of values
Hello,
I have to make a batch input of a list.
The screen of the transaction contains a list with 9 lines, if i enter a value in one, another line is added to the list.
I did record this transaction and have an incremented list in the generated program that looks like this :
it begins whith ADRPCIT-POST_CODE(01) and increments till 09
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
'ADRPCDCITY-POST_CODE(08)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(08)'
record-POST_CODE_08_017.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(09)'
record-POST_CODE_09_018.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
'ADRPCDCITY-POST_CODE(07)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(07)'
record-POST_CODE_07_019.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
'ADRPCDCITY-POST_CODE(08)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(08)'
record-POST_CODE_08_020.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(09)'
record-POST_CODE_09_021.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
What i did is setting the value of the incremented number to 09 if it's greater than 09 but i'm not sure it's the right way to do it cause i get only 9 records
My code :
LOOP AT gt_record ASSIGNING <fs_record>.
IF sy-tabix > 9.
ligne = 9.
ELSE.
ligne = sy-tabix.
ENDIF.
IF ligne > 1.
IF city_mem EQ <fs_record>-city_code_001.
flag_end = 'X'.
ELSE.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_transaction USING 'SR10'.
CLEAR flag_end.
ENDIF.
ENDIF.
city_mem = <fs_record>-city_code_001.
IF flag_end NE 'X'. "premier passage
PERFORM bdc_dynpro USING 'SAPLSZRC' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'ADRCITYD-CITY_CODE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'ADRCITYD-CITY_CODE'
<fs_record>-city_code_001.
PERFORM bdc_field USING 'ADRCITYD-COUNTRY'
'FR'.
PERFORM bdc_field USING 'ADRCITYD-LANGU'
'F'.
PERFORM bdc_dynpro USING 'SAPLSZRC' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'ADRCITYD-COMMU_CODE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'ADRCITYD-FLAG_STRTS'
'X'.
PERFORM bdc_field USING 'ADRCITYD-CITY_NAME'
<fs_record>-city_name_005.
PERFORM bdc_field USING 'ADRCITYD-REGION'
<fs_record>-region_006.
PERFORM bdc_field USING 'ADRCITYD-TIME_ZONE'
'CET'.
PERFORM bdc_field USING 'ADRCITYD-COMMU_CODE'
<fs_record>-commu_code_008.
PERFORM bdc_field USING 'ADRCITYD-DEF_LANGU'
'F'.
PERFORM bdc_dynpro USING 'SAPLSZRC' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'ADRCITYD-CITY_NAME'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=PSTC'.
PERFORM bdc_field USING 'ADRCITYD-FLAG_STRTS'
'X'.
PERFORM bdc_field USING 'ADRCITYD-CITY_NAME'
<fs_record>-city_name_005.
PERFORM bdc_field USING 'ADRCITYD-REGION'
<fs_record>-region_006.
PERFORM bdc_field USING 'ADRCITYD-TIME_ZONE'
'CET'.
PERFORM bdc_field USING 'ADRCITYD-COMMU_CODE'
<fs_record>-commu_code_008.
PERFORM bdc_field USING 'ADRCITYD-DEF_LANGU'
'F'.
* PERFORM bdc_dynpro USING 'SAPLSZRL' '0400'.
ENDIF.
PERFORM bdc_dynpro USING 'SAPLSZRL' '0400'. "ajout2
lignec = ligne.
CONCATENATE 'ADRPCDCITY-POST_CODE(' lignec ')' INTO cp.
PERFORM bdc_field USING 'BDC_CURSOR'
cp.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING cp
<fs_record>-post_code_01_016.
ENDLOOP.
* deniere sauvegarde
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_transaction USING 'SR10'.
CLEAR flag_end.
PERFORM close_group.
PERFORM close_dataset USING dataset.
Can somebody help me on this one ?
Thank you,
Tom.If it is table control you may have to pass PageDown after 9 rec & again start with (01)
record number remains 1 to 9 but Top_line parameter will change to 9or10 after 1 pagedown.
Cxould be P++
you can record Pagedown & check recording. -
Batch input session is not generating In BRS
Hello,
I am uploading bank statement through ZFF67 program manual bank statement, after entering all the line items in the file, batch input session is not generating in SM35.
Please give advice.
Thanks,
RatnamHi,
Go to environment - specification- here you need to maintain settings for batch input processing in T.code FF67.
I am not exactly remembering the menu option name. The sub option name is Specification, these settings you need to change with your user id.
Check and revert back still the same problem exists.
Regards,
Sankar -
BDC programming using Batch input Session.
Hello Experts.
I'm an ABAP beginner. I've benn practicing BDC programming using Batch input Session
at the moment.
This is the program that upload Local file which has plural records, and put the records into a Session.
These are the records.
413459,KIM EI HWAN121 ,19810607,MIADONG1234
423459,KIM EI HWAN122 ,19810607,MIADONG1235
433459,KIM EI HWAN123 ,19810607,MIADONG1236
443459,KIM EI HWAN124 ,19810607,MIADONG1237
453459,KIM EI HWAN125 ,19810607,MIADONG1238
463459,KIM EI HWAN126 ,19810607,MIADONG1239
I succeeded making Session.
However, for some reaseon, every record in the Session has got the same, value which is the first record.
Why is this happening? And How can I correct the code below?
REPORT ZBCUSER002_BATCH NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZBATCH.
= Types definition ===================================================
TYPES: BEGIN OF TYP_LOCAL, "For Local file upload
RECORD(200) TYPE C,
END OF TYP_LOCAL.
= Internal table definition ==============================================
DATA: BEGIN OF BDC_TAB OCCURS 0. "BDCDATA itab
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDC_TAB.
DATA: BEGIN OF MESSAGE_BDC OCCURS 0. "Message itab
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSAGE_BDC.
DATA: TBL_LOCAL TYPE STANDARD TABLE OF TYP_LOCAL, "Local file itab
F_TBL TYPE FILETABLE. "FILETABLE fot local
= Structure table definition =========================================
DATA: STR_F_TBL LIKE LINE OF F_TBL, "FILETABLE structure
STR_LOCAL TYPE TYP_LOCAL. "Local file structure
= Variable definition ================================================
DATA: LV_RC TYPE I, "Method parameter
ENUMBER TYPE ZT601-ENUMBER, "Employee number
NAME TYPE ZT601-NAME, "Employee name
BIRTH TYPE ZT601-BIRTH, "Birthday
HOMETOWN TYPE ZT601-HOMETOWN, "Hometown
SYSVAL TYPE SY-SUBRC. "System valuible
= Constants definition ===============================================
CONSTANTS: TBL_NAME(10) TYPE C VALUE 'ZT601'. "Table name ZT601
= Parameters definition ==============================================
PARAMETERS: F_NAME TYPE RLGRAP-FILENAME OBLIGATORY, "File path
EXECMODE(1) TYPE C. "Execute mode
INITIALIZATION
*----- Initialize all valuables, structures and internal tables
CLEAR: LV_RC,
STR_F_TBL,
STR_LOCAL,
ENUMBER,
NAME,
BIRTH,
HOMETOWN.
REFRESH: F_TBL,
TBL_LOCAL.
AT SELECTION-SCREEN
*----- When the button next to Parameter 'F_NAME',
*----- File dialog open.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR F_NAME.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'SELECT FILE'
DEFAULT_FILENAME = '*.TXT'
CHANGING
FILE_TABLE = F_TBL
RC = LV_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
OTHERS = 3
*----- system valiable check.
*----- If done properly,
*----- Put the path into the File path parameter
IF SY-SUBRC = 0.
READ TABLE F_TBL INTO STR_F_TBL INDEX 1.
F_NAME = STR_F_TBL.
*----- If not done properly, show message
*----- An error occured while getting file path then end program
ELSE.
MESSAGE E000.
ENDIF.
*----- Execute code can only be A or N.
AT SELECTION-SCREEN ON EXECMODE.
IF EXECMODE <> 'A' AND EXECMODE <> 'N'.
MESSAGE E001.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
*----- Upload Local file of file path parameter.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = F_NAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = TBL_LOCAL
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6.
*----- System valiable check.
*----- If not done properly, show an error message
*----- An error occured while uploading local file then end program
IF SY-SUBRC <> 0.
MESSAGE E002.
ENDIF.
PERFORM BDC_OPEN.
*----- Loop Internal table
LOOP AT TBL_LOCAL INTO STR_LOCAL.
*----- Spilt the file record and put them into each valiable.
SPLIT STR_LOCAL AT ',' INTO ENUMBER
NAME
BIRTH
HOMETOWN.
*----- Data check Function module
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
DATE = BIRTH
EXCEPTIONS
PLAUSIBILITY_CHECK_FAILED = 1
OTHERS = 2.
*----- When error occurs while checking date, show an error message.
*----- (&1) is not date
IF SY-SUBRC <> 0.
MESSAGE E003 WITH BIRTH.
ENDIF.
*-- The first screen of SE11
*----- Screen number 0102 of program id SAPMSRD0
PERFORM BDC_DYNPRO USING 'SAPMSRD0' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RSRD1-TBMA_VAL'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SHOW'. "Display button
PERFORM BDC_FIELD USING 'RSRD1-TBMA'
'X'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA_VAL'
TBL_NAME. "ZT601
*-- Table definition screen
*----- Screen number 2000 of program id SAPLSD02
PERFORM BDC_DYNPRO USING 'SAPLSD02' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'DD02D-TABCLTEXT'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TDED'. "Create entry
PERFORM BDC_FIELD USING 'BDC_SUBSCR'
'SAPLSD02'.
PERFORM BDC_FIELD USING 'BDC_SUBSCR'
'SAPLSED5'.
*-- Data input screen
*----- Screen number 0101 of program /1BCDWB/DBZT601
PERFORM BDC_DYNPRO USING '/1BCDWB/DBZT601' '0101'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ZT601-CRUSER'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SAVE'. "Save
PERFORM BDC_FIELD USING 'ZT601-MANDT'
SY-MANDT. "Client
PERFORM BDC_FIELD USING 'ZT601-ENUMBER'
ENUMBER. "Employee number
PERFORM BDC_FIELD USING 'ZT601-NAME'
NAME. "Employee name
PERFORM BDC_FIELD USING 'ZT601-BIRTH'
BIRTH. "Birthday
PERFORM BDC_FIELD USING 'ZT601-HOMETOWN'
HOMETOWN. "Hometown
PERFORM BDC_FIELD USING 'ZT601-CRDATE'
SY-DATUM. "System date
PERFORM BDC_FIELD USING 'ZT601-CRTIME'
SY-UZEIT. "System time
PERFORM BDC_FIELD USING 'ZT601-CRUSER'
SY-UNAME. "System user
*-- Data input screen (After input)
*----- Screen number 0101 of program /1BCDWB/DBZT601
PERFORM BDC_DYNPRO USING '/1BCDWB/DBZT601' '0101'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/EBACK'. "Back
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ZT601-CRUSER'. "Field on Cursor
*-- Table definition screen]
*----- Screen number 2000 of program SAPLSD02
PERFORM BDC_DYNPRO USING 'SAPLSD02' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'DD02D-TABCLTEXT'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=WB_BACK'. "Back
*-- The first screen of SE11
*----- Screen number 0102 of program SAPMSRD0
PERFORM BDC_DYNPRO USING 'SAPMSRD0' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RSRD1-TBMA_VAL'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BACK'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA'
'X'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA_VAL'
TBL_NAME.
PERFORM BDC_INSERT.
ENDLOOP.
PERFORM BDC_CLOSE.
FORM BDC_DYNPRO *
Put Program-Id, Dynpro screen number, Start point
into DBCDATA
--> PROGRAM *
--> DYNPRO *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDC_TAB.
BDC_TAB-PROGRAM = PROGRAM.
BDC_TAB-DYNPRO = DYNPRO.
BDC_TAB-DYNBEGIN = 'X'.
APPEND BDC_TAB.
ENDFORM.
FORM BDC_FIELD *
Put Field Name and Value into BDCDATA
--> FNAM *
--> FVAL *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDC_TAB.
BDC_TAB-FNAM = FNAM.
BDC_TAB-FVAL = FVAL.
APPEND BDC_TAB.
ENDFORM.
FORM bdc_process *
FORM BDC_OPEN.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = 'Testsession'
KEEP = 'X'
USER = SY-UNAME.
IF SY-SUBRC <> 0.
MESSAGE E006 WITH SY-SUBRC.
ENDIF.
ENDFORM.
FORM bdc_insert *
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'SE11'
TABLES
DYNPROTAB = BDC_TAB
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
MESSAGE E007 WITH SY-SUBRC.
ENDIF.
CLEAR: BDC_TAB.
ENDFORM.
FORM bdc_close *
FORM BDC_CLOSE.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE E008 WITH SY-SUBRC.
ENDIF.
ENDFORM.God I forgot to refresh Internal table after putting record into Session.
Now I'm done.
You guys be careful too. -
Error exec. Background Mode a Batch-Input using KP26 Transaction Code
I have a program that build a Batch-Input based on transaction code KP26.
I encounter the following error :
Field Z-BDC02(1) is not an input field (Program : SAPLKPP2 Screen : 0112)
When executing in background I got the error and when executing in Foreground, it is OK.
I use SHDB to look at the field needed and it gave me the same field to use.
Here is an extract of my program for the field I have the issue on :
PERFORM F100_BDC_FIELD USING 'Z-BDC02(01)' I_T01-LST.
PERFORM F100_BDC_FIELD USING 'Z-BDC05(01)' I_T01-SPRED.
PERFORM F100_BDC_FIELD USING 'Z-BDC07(01)' I_T01-TOV.
PERFORM F100_BDC_FIELD USING 'Z-BDC08(01)' I_T01-TOF.
Any one have an hint to solve this ?Hi,
Just one remark: batch input is always executed in synchronous mode (hopefully, otherwise we would get many lock issues during mass updates!) Or is there something I missed?
Same thing when you use BDC_INSERT, CTU_PARAMS is ignored ([SAP note 1437811 (Batch input: BDC_INSERT parameter CTUPARAMS)|https://service.sap.com/sap/support/notes/1437811 ])
About the issue, I don't know, so maybe explain more about the context: for instance, do you run the session under a different user? (for instance, the user could be assigned a transaction/screen variant with table control variant, that protects some fields) Do you have one transaction in the batch input session or are there several ones. Try with one only to see if it works. If yes, then maybe it's something in memory that changes the "input-capability" of the field after the first transaction.
Sandra -
Upgrade batch inputs from 4.6C to mySAP ERP 2005
Hi,
we are planning to upgrade from 4.6C to mySAP ERP 2005 (ECC 6.0). We are using batch input/call transaction in various (interface) programs (primarily in modules SD, MM, CS/SM, FI, CO). I would be grateful for any information that helps to estimate the effort to upgrade our batch input code. In which areas/modules/transactions did you encounter problems with batch inputs? How severe were these problems (one or two fields moved to another screen, or major redesign)? How did you address these problems (change BI or convert code to use BAPI)?
Thank you
ThomasHi thomas,
we were working on batch input's and our scenario is something like convertion of bdc's from 4.5b to ECC5. well, it was a long process of upgradation. and coming to the part of BDC's
Q) any information that helps to estimate the effort to upgrade our batch input code.
we had 300 BDC's to convert from 4.5b to ECC5 and with a ten member team of ABAP experts it took us 30 working days to complete the process.
Q) In which areas/modules/transactions did you encounter problems with batch inputs?
Mostly, we had problems from FI and something like in Revenue recognition process. The problems comes, when the whole transactions screens changes for the process. at this time we have to write completly a new BDC's. if we have right functional specifications and functional experts, it will be easy to convert BDC's.
Q) How severe were these problems (one or two fields moved to another screen, or major redesign)?
As i have mentioned, out of 300 almost 25 to 50 were minor changes rest were huge changes. a completely new BDC's. the point here is, we were updating from 4.5b to ECC5. it might not be this scenario for 4.6c to ECC5
Q) How did you address these problems (change BI or convert code to use BAPI)?
well, this is were we are curently working now. and curently there are 4 scenarios (and may be more in the future) were we have to replace three BDC's which are used for material master creation and make it into one bapi satisfying all the conditions of BDC's. actually, we have to find a BAPI( which i couldn't find) so, i have created a bapi. and tougher part is writing exceptions as we cannot write exceptions as we do in function module.
hope this is relavent to what you have asked.
cheers
ajay -
Problems while creating a batch input
Hi Experts,
I tried to create a batch input program for the transaction CRMD_ORDER for some changes on to the configuration tab to enable the BOM to work. This cannot be done by the BAPIs. I have included the batch input program in a RFC enabled function module to do this job. I am getting the error control framework: fatal error - GUI cannot be reached and Runtime error RAISE_EXCEPTION has occured. This happens only in the mode N, if i re run the session with the other modes there are no problems.
I am call the function module through a method in the controller class.
Replies are highly appreciated.
Thanks in Advance.
Regards,
SuthagarHi Durai,
I tried that option too. Ufortunately the same error has happened. The problem is solved using 3 other function modules, by not using the BDC.
Appreciate your reply. Thanks!
Regards.
Suthagar -
Batch input with customer fields
I have to create a batch input process that post documents through FB01L.
As the lines of each document have been added customer fields, when I tried to go from one line of the document to the following one, a screen appears when I have to introduce some data (two of the fields are mandatory). I had solved these issue by ending with a "Call Transaction" with option "No batch input" = 'X'. This way, these customer fields appear directly in the screen, and not in a popup screen, so the batch input process was very easy.
But, I have been told that I don't have to use "Call transacion", I have to create a session, and the user will post the document by launching it in SM35. This way, even adding "No batch input" = 'X' in the options of "BDC_INSERT", the popup screen appears when running the session.
So, is there any way of running the session in SM35 with the option "No batch input"? If it's not possible, which is the best option of dealing with these popup screens? I have been able to go from one dynpro to another, and to open that popup screen, but I can't fill the mandatory fields.
I hope you understand my problem, please excuse my English.Hi ,
Go to the T code Mass , put the object as KNA1 for customers .
Execute the same and you will find all the option available for making mass changes .
In case if your requirement does not meet here then you will have to go for a LSMW .
Regards ,
Dewang T -
Dear all,
I am uploading the bank statements using manual bank statements through Z transaction, Once uploaded system is generating the batch input session for the same.
When i run the batch input session system not clearing outgoing payment automatically based on the assignment field, as i have alreday mentioned the same assignment while posting the document and in the excel file.
I am getting the following message while running the batch input session.
No batch input data for screen SAPDF05X 3100
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Please let me know solution for the same.
Regards,
AnandHi,
This may not be a solution but may help you to isolate the problem
a) Are you able to load the bank statement for other banks without error ?
b) Try for the same bank in a different system .
c) If it is working for different bank then check the file format is the same for both the banks.
d) If it is working in different system check the ABAP code for any changes between the system,
e) Are you getting this message for all the line items or only for some line items ?
Regards
K.R -
About material master data batch input
hello
i wrote a batch input for material master data. but it can't work ,i can't use it to create material.hope someone help me!thanks.code is below.
report z_mat_batchinput no standard page heading
line-size 255 message-id YB.
mat batch input
include bdcrecx1.
include .
tables: mara,marm,MARC,MARD,T134,NRIV,T006A,T023,T001W,T001L,
TVKO,TVTW,T025,TTGR,TLGR,TVKWZ,T006.
data: DIMID like t006-DIMID.
data: flag, K, tmp.
DATA: X TYPE I.
************ÉÏÔØÎļþÄÚ±í************************
data: begin of record occurs 0,
MATNR(018), " ÎïÁϺÅ
MTART(004), " ÎïÁÏÀàÐÍ
**generaldata1**
MAKTX(040), " ÎïÁÏÃèÊö
EAKTX(040), " Ó¢ÎÄÃèÊö
MEINS(003), " »ù±¾¼ÆÁ¿µ¥Î»
MATKL(009), " ÎïÁÏ×é
BISMT(018), " ¾ÉÎïÁϺÅ
EXTWG(018), " ÍⲿÎïÁÏ×é
SPART(002), " ²¿ÃÅ
MTPOS_MARA(004), " ÆÕͨÏîÄ¿Àà±ð×é
BRGEW(017), " ëÖØ
GEWEI(003), " ÖØÁ¿µ¥Î»
NTGEW(017), " ¾»ÖØ
VOLUM(017), " Ìå»ý
VOLEH(003), " Ìå»ýµ¥Î»
GROES(032), " Á¿¸Ù
MAGRV(004), " ÎïÁÏ×éµÄ°ü×°Îï
**generaldata2**
NORMT(018), " ¹¤Òµ±ê×¼ÃèÊö
FERTH(018), " ÀàÐÍ
WRKST(048), " ¹æ¸ñ
**generaldata1**
EAN11(018), " ²úÆ·±íʶÂë
**generaldata2**
ZEIAR(003), " ÎĵµÀàÐÍ£¬ºÏÀí´¢±¸ÖÜתÆÚ
WERKS(004), " ¹¤³§
VKORG(004), " ÏúÊÛ×éÖ¯
VTWEG(002), " ·ÖÏúÇþµÀ
**salesorg 1**
VRKME(003), " ÏúÊÛµ¥Î»
VMREN(006), " ÏúÊÛµ¥Î»×ª»»Òò×Ó
VMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
SPART(002), " ²úÆ·×é
DWERK(004), " ½»»õ¹¤³§
TAXKM(001), " ÎïÁÏË°·ÖÀà
**salesorg 2**
KONDM(002), " ÎïÁ϶¨¼Û×é
KTGRM(002), " ¿ÆÄ¿ÉèÖÃ×é
MVGR1(003), " ÎïÁÏ×é 1
MVGR2(003), " ÎïÁÏ×é 2
MTPOS(004), " ÏîÄ¿Àà±ð×é
VERSG(001), " ÎïÁÏͳ¼Æ×é
**ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý**
MTVFP(002), " ¿ÉÓÃÐÔ¼ì²é
XCHPF(001), " Åú´Î¹ÜÀí
YCHPF(001), " ÅúÁ¿¹ÜÀí
TRAGR(004), " ÔËÊä×é
ladgr(004), " ×°ÔØ×é
**pur**
BSTME(003), " ¶©µ¥µ¥Î»
UMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
UMREN(006), " ¶©µ¥µ¥Î»×ª»»Òò×Ó
WEBAZ(003), " ÊÕ»õ´¦Àíʱ¼ä
EKGRP(003), " ²É¹º×é
LGORT(004), " ¿â´æµØ
**Ò»°ã¹¤³§Êý¾Ý/²Ö´¢1**
AUSME(003), " ·¢»õµ¥Î»
UMREJ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
UMREF(006), " ·¢»õµ¥Î»×ª»»Òò×Ó
XCHPF(001), " ÅúÁ¿¹ÜÀí
**MRP 1**
DISGR(004), " MRP×é
DISMM(002), " MRPÀàÐÍ
FXHOR(003), " ¼Æ»®µÄʱ½ì
DISPO(003), " MRP¿ØÖÆÕß
DISLS(002), " ÅúÁ¿
MAABC(001), " ABC±êʶ
BSTFE(018), " ¹Ì¶¨ÅúÁ¿´óС
**MRP 2**
RESKZ(001), " »ñÈ¡ÀàÐÍ
BESKZ(001), " ²É¹ºÀàÐÍ
SOBSL(002), " ÌØÊâ²É¹ºÀà
LGPRO(004), " ·¢»õ²Ö´¢µØµã
RGEKZ(001), " ·´³å
PLIFZ(003), " ¼Æ»®½»»õʱ¼ä
VEBAZ(003), " ÊÕ»õ´¦Àíʱ¼ä
DZEIT(008), "×ÔÖÆÉú²ú
FHORI(003), " ¼Æ»®±ß¼ÊÂë
EISBE(018), " °²È«¿â´æ
**MRP 3**
PERKZ(001), " ÆÚ¼ä±êʶ
STRGR(002), " ²ßÂÔ×é
VRMOD(001), " ÏûºÄģʽ
VINT1(003), " ÄæÏòÏûºÄÆÚ¼ä
VINT2(003), " ÏòÇ°ÏûºÄÆÚ¼ä
NTVFP(002), " ¿ÉÓÃÐÔ¼ì²é
**MRP 4**
SAUFT(001), " Öظ´ÖÆÔì±êÖ¾
SFEPR(004), " Öظ´Éú²ú²ÎÊýÎļþ
**¹¤×÷¼Æ»®**
FEVOR(003), " Éú²úµ÷¶ÈÔ±
FRTME(003), " Éú²úµ¥Î»
SMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
SMREN(006), " Éú²úµ¥Î»×ª»»Òò×Ó
UEETK(001), " ÎÞÏÞÖƹýÁ¿½»»õ
**»á¼Æ 1**
BKLAS(004), " ÆÀ¹ÀÀà
BWTTY(001), " ¹À¼Û·ÖÀà
VPRSV(001), " ¼Û¸ñ¿ØÖÆ
PEINH(006), " ¼Û¸ñµ¥Î»
VERPR(015), " Òƶ¯Æ½¾ù¼Û
STPRS(015), " ±ê×¼¼Û
**»á¼Æ 2**
BWPRH(014), " ÉÌÒµ¼Û¸ñ 1
**³É±¾ 1**
LOSGR(018), " ÅúÁ¿³É±¾ºËËã
**³É±¾ 2**
ZPLP1(014), " ¼Æ»®¼Û¸ñ 1
ZPLD1(010), " ¼Æ»®ÈÕÆÚ 1
**qm**
ART1(8), "¼ìÑéÀàÐÍ1
AKTIV1(1), "ÒѼ¤»î
QMPUR(1), "¼¤»î²É¹ºÖÐµÄ QM
SSQSS(8), "QM ¿ØÖÆÂë¡¢
QMATV(8), "QM¼ìÑéÉèÖÃ
ART2(8), "¼ìÑéÀàÐÍ2
AKTIV2(6), "ÒѼ¤»î
ART3(8), "¼ìÑéÀàÐÍ3
AKTIV3(6), "ÒѼ¤»î
end of record.
************ÏÂÔظñʽ/´íÎóÎļþÄÚ±í**************
data: begin of record1 occurs 0,
MATNR(018), " ÎïÁϺÅ
MTART(008), " ÎïÁÏÀàÐÍ
**»ù±¾Êý¾Ý1**
MAKTX(040), " ÎïÁÏÃèÊö
EAKTX(040), " Ó¢ÎÄÃèÊö
MEINS(013), " »ù±¾¼ÆÁ¿µ¥Î»
MATKL(009), " ÎïÁÏ×é
BISMT(018), " ¾ÉÎïÁϺÅ
EXTWG(018), " ÍⲿÎïÁÏ×é
SPART(002), " ²¿ÃÅ
MTPOS_MARA(004), " ÆÕͨÏîÄ¿Àà±ð×é
BRGEW(017), " ëÖØ
GEWEI(008), " ÖØÁ¿µ¥Î»
NTGEW(017), " ¾»ÖØ
VOLUM(017), " Ìå»ý
VOLEH(008), " Ìå»ýµ¥Î»
GROES(032), " Á¿¸Ù
MAGRV(014), " ÎïÁÏ×éµÄ°ü×°Îï
**»ù±¾Êý¾Ý2**
NORMT(018), " ¹¤Òµ±ê×¼ÃèÊö
FERTH(018), " ÀàÐÍ
WRKST(048), " ¹æ¸ñ
**»ù±¾Êý¾Ý1**
EAN11(018), " ²úÆ·±íʶÂë
**»ù±¾Êý¾Ý2**
ZEIAR(003), " ÎĵµÀàÐÍ£¬ºÏÀí´¢±¸ÖÜתÆÚ
WERKS(004), " ¹¤³§
VKORG(008), " ÏúÊÛ×éÖ¯
VTWEG(008), " ·ÖÏúÇþµÀ
**ÏúÊÛ×éÖ¯ 1**
VRKME(003), " ÏúÊÛµ¥Î»
VMREN(006), " ÏúÊÛµ¥Î»×ª»»Òò×Ó
VMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
SPART(006), " ²úÆ·×é
DWERK(008), " ½»»õ¹¤³§
TAXKM(010), " ÎïÁÏË°·ÖÀà
**ÏúÊÛ×éÖ¯ 2**
KONDM(010), " ÎïÁ϶¨¼Û×é
KTGRM(010), " ¿ÆÄ¿ÉèÖÃ×é
MVGR1(003), " ÎïÁÏ×é 1
MVGR2(003), " ÎïÁÏ×é 2
MTPOS(010), " ÏîÄ¿Àà±ð×é
VERSG(001), " ÎïÁÏͳ¼Æ×é
**ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý**
MTVFP(010), " ¿ÉÓÃÐÔ¼ì²é
XCHPF(008), " Åú´Î¹ÜÀí
YCHPF(001), " ÅúÁ¿¹ÜÀí
TRAGR(006), " ÔËÊä×é
ladgr(006), " ×°ÔØ×é
**²É¹º**
BSTME(003), " ¶©µ¥µ¥Î»
UMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
UMREN(006), " ¶©µ¥µ¥Î»×ª»»Òò×Ó
WEBAZ(003), " ÊÕ»õ´¦Àíʱ¼ä
EKGRP(006), " ²É¹º×é
LGORT(004), " ¿â´æµØ
**Ò»°ã¹¤³§Êý¾Ý/²Ö´¢1**
AUSME(003), " ·¢»õµ¥Î»
UMREJ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
UMREF(006), " ·¢»õµ¥Î»×ª»»Òò×Ó
XCHPF(001), " ÅúÁ¿¹ÜÀí
**MRP 1**
DISGR(004), " MRP×é
DISMM(009), " MRPÀàÐÍ
FXHOR(003), " ¼Æ»®µÄʱ½ì
DISPO(011), " MRP¿ØÖÆÕß
DISLS(004), " ÅúÁ¿
MAABC(007), " ABC±êʶ
BSTFE(018), " ¹Ì¶¨ÅúÁ¿´óС
**MRP 2**
RESKZ(001), " »ñÈ¡ÀàÐÍ
BESKZ(008), " ²É¹ºÀàÐÍ
SOBSL(002), " ÌØÊâ²É¹ºÀà
LGPRO(004), " ·¢»õ²Ö´¢µØµã
RGEKZ(001), " ·´³å
PLIFZ(012), " ¼Æ»®½»»õʱ¼ä
VEBAZ(003), " ÊÕ»õ´¦Àíʱ¼ä
DZEIT(008), "×ÔÖÆÉú²ú
FHORI(010), " ¼Æ»®±ß¼ÊÂë
EISBE(018), " °²È«¿â´æ
**MRP 3**
PERKZ(008), " ÆÚ¼ä±êʶ
STRGR(006), " ²ßÂÔ×é
VRMOD(001), " ÏûºÄģʽ
VINT1(003), " ÄæÏòÏûºÄÆÚ¼ä
VINT2(003), " ÏòÇ°ÏûºÄÆÚ¼ä
NTVFP(010), " ¿ÉÓÃÐÔ¼ì²é
**MRP 4**
SAUFT(001), " Öظ´ÖÆÔì±êÖ¾
SFEPR(004), " Öظ´Éú²ú²ÎÊýÎļþ
**¹¤×÷¼Æ»®**
FEVOR(003), " Éú²úµ÷¶ÈÔ±
FRTME(003), " Éú²úµ¥Î»
SMREZ(006), " »ù±¾µ¥Î»×ª»»Òò×Ó
SMREN(006), " Éú²úµ¥Î»×ª»»Òò×Ó
UEETK(001), " ÎÞÏÞÖƹýÁ¿½»»õ
**»á¼Æ 1**
BKLAS(006), " ÆÀ¹ÀÀà
BWTTY(001), " ¹À¼Û·ÖÀà
VPRSV(008), " ¼Û¸ñ¿ØÖÆ
PEINH(008), " ¼Û¸ñµ¥Î»
VERPR(015), " Òƶ¯Æ½¾ù¼Û
STPRS(015), " ±ê×¼¼Û
**»á¼Æ 2**
BWPRH(014), " ÉÌÒµ¼Û¸ñ 1
**³É±¾ 1**
LOSGR(018), " ÅúÁ¿³É±¾ºËËã
**³É±¾ 2**
ZPLP1(014), " ¼Æ»®¼Û¸ñ 1
ZPLD1(010), " ¼Æ»®ÈÕÆÚ 1
**ÖÊÁ¿¹ÜÀí**
ART1(8), "¼ìÑéÀàÐÍ1
AKTIV1(6), "ÒѼ¤»î
QMPUR(010), "¼¤»î²É¹ºÖÐµÄ QM
SSQSS(8), "QM ¿ØÖÆÂë¡¢
QMATV(8), "QM¼ìÑéÉèÖÃ
ART2(8), "¼ìÑéÀàÐÍ2
AKTIV2(6), "ÒѼ¤»î
ART3(8), "¼ìÑéÀàÐÍ3
AKTIV3(6), "ÒѼ¤»î
end of record1.
selection-screen begin of block 0 with frame title text-001.
selection-screen begin of line .
selection-screen position 1.
parameters: test like rkec1-test .
selection-screen
comment 3(4) text-004 for field test.
selection-screen position 26.
parameters: oldfile like rlgrap-filename.
selection-screen
comment 9(17) text-003 for field oldfile.
selection-screen: end of line.
selection-screen begin of line.
selection-screen position 1.
parameters: dnldflag like rkec1-test default 'X'.
selection-screen
comment 3(4) text-005 for field dnldflag.
selection-screen position 26.
parameters: outfile like rlgrap-filename .
selection-screen
comment 9(17) text-006 for field outfile.
selection-screen: end of line.
selection-screen end of block 0 .
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-002.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: GEN1 LIKE RKEC1-TEST.
selection-screen
comment 3(9) text-007 for field GEN1.
selection-screen position 26.
PARAMETERS: GEN2 LIKE RKEC1-TEST.
selection-screen
comment 28(9) text-008 for field GEN2.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: SALORG1 LIKE RKEC1-TEST.
selection-screen
comment 3(21) text-009 for field SALORG1.
selection-screen position 26.
PARAMETERS: SALORG2 LIKE RKEC1-TEST.
selection-screen
comment 28(21) text-010 for field SALORG2.
selection-screen position 51.
PARAMETERS: SALPLANT LIKE RKEC1-TEST.
selection-screen
comment 53(19) text-011 for field SALPLANT.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: PURCHASE LIKE RKEC1-TEST.
selection-screen
comment 3(21) text-012 for field PURCHASE.
selection-screen position 26.
PARAMETERS: PLTSTRG1 LIKE RKEC1-TEST.
selection-screen
comment 28(21) text-018 for field PLTSTRG1.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: MRP1 LIKE RKEC1-TEST.
selection-screen
comment 3(4) text-013 for field MRP1.
selection-screen position 13.
PARAMETERS: MRP2 LIKE RKEC1-TEST.
selection-screen
comment 15(4) text-014 for field MRP2.
selection-screen position 26.
PARAMETERS: MRP3 LIKE RKEC1-TEST.
selection-screen
comment 28(4) text-015 for field MRP3.
selection-screen position 37.
PARAMETERS: MRP4 LIKE RKEC1-TEST.
selection-screen
comment 39(4) text-016 for field MRP4.
selection-screen position 51.
PARAMETERS: PLANTSTR LIKE RKEC1-TEST.
selection-screen
comment 53(8) text-017 for field PLANTSTR.
selection-screen end of line.
selection-screen begin of line.
selection-screen position 1.
PARAMETERS: QAU LIKE RKEC1-TEST.
selection-screen
comment 3(8) text-023 for field QAU.
selection-screen position 13.
PARAMETERS: ACC1 LIKE RKEC1-TEST.
selection-screen
comment 15(5) text-019 for field ACC1.
selection-screen position 26.
PARAMETERS: ACC2 LIKE RKEC1-TEST.
selection-screen
comment 28(5) text-020 for field ACC2.
selection-screen position 37.
PARAMETERS: COR1 LIKE RKEC1-TEST.
selection-screen
comment 39(5) text-021 for field COR1.
selection-screen position 51.
PARAMETERS: COR2 LIKE RKEC1-TEST.
selection-screen
comment 53(5) text-022 for field COR2.
selection-screen end of line.
SELECTION-SCREEN END OF BLOCK 1.
at selection-screen on value-request for oldfile.
call function 'KD_GET_FILENAME_ON_F4'
EXPORTING
mask = ',Îı¾Îļþ(ÖƱí·û·Ö¸ô),*.txt'
static = 'X'
CHANGING
file_name = oldfile.
at selection-screen on value-request for outfile.
call function 'KD_GET_FILENAME_ON_F4'
EXPORTING
mask = ',Microsoft Excel¹¤×÷²¾,*.xls'
static = 'X'
CHANGING
file_name = outfile.
initialization.
******µÃµ½ÎļþĿ¼*******
call function 'WS_QUERY'
EXPORTING
query = 'CD'
IMPORTING
return = outfile.
if sy-subrc <> 0.
message e005 with outfile.
endif.
oldfile = outfile.
concatenate outfile 'mat_fat' into outfile.
*ÅúÊäÈëĬÈÏÃû³Æ
group = 'MATBATCHIN'.
start-of-selection.
if dnldflag eq 'X' and not ( outfile is initial ).
perform download_data.
stop.
endif.
perform upload_data.
if test = ' '.
*ÊÓͼ²ÎÊý¼ì²é
IF ( GEN1 NE 'X' AND GEN2 NE 'X' AND SALORG1 NE 'X'
AND SALORG2 NE 'X' AND SALPLANT NE 'X'
AND PURCHASE NE 'X' AND PLTSTRG1 NE 'X'
AND MRP1 NE 'X' AND MRP2 NE 'X' AND MRP3 NE 'X'
AND MRP4 NE 'X' AND PLANTSTR NE 'X'
AND ACC1 NE 'X' AND ACC2 NE 'X'
AND COR1 NE 'X' AND COR2 NE 'X' and qau ne 'X' ) .
MESSAGE E000 WITH 'ÇëÑ¡ÔñÐèά»¤ÊÓͼ'.
ENDIF.
perform open_group.
SORT RECORD BY WERKS MATNR.
loop at record.
perform bdc_fill.
perform bdc_transaction using 'MM01'.
clear: bdcdata.
refresh: bdcdata.
endloop.
perform close_group.
else.
perform file_check.
endif.
end-of-selection.
*& Form UPLOAD_DATA
ÉÏÔØÅúÊäÈëÊý¾Ý
--> p1 text
<-- p2 text
form upload_data.
call function 'WS_UPLOAD'
EXPORTING
filename = oldfile
filetype = 'DAT'
TABLES
data_tab = record
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
customer_error = 9
others = 10.
if sy-subrc <> 0.
message E000 with 'ÇëÊäÈëÉÏÔØÎļþ'.
endif.
read table record with key MATNR = '**'.
if sy-tabix lt 1.
message E000 with 'ÉÏÔØÎļþÎļþÍ·ÓëÊý¾ÝÖ®¼äÎÞ**'.
endif.
delete record from 1 to sy-tabix.
endform. " UPLOAD_DATA
*& Form BDC_FILL
ÅúÊäÈë
--> p1 text
<-- p2 text
form bdc_fill.
data: N type I,
M type I,
S_MATNR(018),
test(1) type N.
PERFORM BDC_FILL_INITALSCR. "³õʼÆÁÄ»
tmp = '0'.
condense record-matnr no-gaps.
test = record-matnr(1).
if test <> ''.
M = STRLEN( RECORD-MATNR ).
M = 18 - M.
DO M TIMES.
CONCATENATE '0' RECORD-MATNR INTO S_MATNR.
RECORD-MATNR = S_MATNR.
ENDDO.
endif.
**ÅжÏÎïÁÏ»ù±¾ÊÓͼÊÇ·ñÒѾ±»Î¬»¤¹ý**
SELECT SINGLE * FROM MARA WHERE MATNR = RECORD-MATNR.
IF SY-SUBRC NE 0.
K = '0'.
Else.
condense MARA-PSTAT no-gaps.
N = strlen( mara-pstat ).
M = 0.
record-meins = mara-meins.
do N times.
K = MARA-PSTAT+M.
IF K = 'K'.
EXIT.
ENDIF.
M = M + 1.
enddo.
ENDIF.
IF ( ( GEN1 EQ 'X' OR GEN2 EQ 'X' ) AND SALORG1 NE 'X'
AND SALORG2 NE 'X' AND SALPLANT NE 'X'
AND PURCHASE NE 'X' AND PLTSTRG1 NE 'X'
AND MRP1 NE 'X' AND MRP2 NE 'X' AND MRP3 NE 'X'
AND MRP4 NE 'X' AND PLANTSTR NE 'X'
AND ACC1 NE 'X' AND ACC2 NE 'X'
AND COR1 NE 'X' AND COR2 NE 'X' and qau ne 'X' ) .
IF K EQ 'K'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(15)'.
perform bdc_field using 'BDC_OKCODE'
'/N'.
ELSE.
PERFORM BDC_FILL_CHOICEVIEW. "Ñ¡ÔñÊÓͼ
ENDIF.
ELSE.
PERFORM BDC_FILL_CHOICEVIEW. "Ñ¡ÔñÊÓͼ
PERFORM BDC_FILL_ORGVIEW. "×éÖ¯¼¶±ð
ENDIF.
TRANSLATE record-MEINS TO UPPER CASE.
TRANSLATE record-BSTME TO UPPER CASE.
TRANSLATE record-VRKME TO UPPER CASE.
TRANSLATE record-FRTME TO UPPER CASE.
TRANSLATE record-AUSME TO UPPER CASE.
if gen1 eq 'X'.
IF K NE 'K'.
PERFORM GENERALDATA1.
ENDIF.
endif.
if gen2 eq 'X'.
IF K NE 'K'.
perform generaldata2.
ENDIF.
endif.
if salorg1 eq 'X'.
perform salorg1.
endif.
if salorg2 eq 'X'.
perform salorg2.
endif.
if salplant eq 'X'.
perform salplant.
endif.
if purchase eq 'X'.
perform purchasedata.
endif.
if mrp1 eq 'X'.
perform MRP1.
endif.
if mrp2 eq 'X'.
perform MRP2.
endif.
if mrp3 eq 'X'.
perform MRP3.
endif.
if mrp4 eq 'X'.
perform MRP4.
endif.
if PLANTSTR eq 'X'.
perform PLANTSTR.
endif.
if PLTSTRG1 eq 'X'.
perform PLTSTRG1.
endif.
if qau eq 'X'.
perform qualitydata.
endif.
if ACC1 eq 'X'.
perform ACC1DATA.
endif.
if ACC2 eq 'X'.
perform ACC2DATA.
endif.
if COR1 eq 'X'.
perform COR1DATA.
endif.
if COR2 eq 'X'.
perform COR2DATA.
endif.
perform BDC_SAVE.
endform. " BDC_FILL
*& Form GENERALDATA1
Ò»°ãÊý¾Ý 1
--> p1 text
<-- p2 text
form generaldata1.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
"'=ZU01'.
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX. " ÎïÁÏÃèÊö
perform bdc_field using 'MARA-MEINS'
record-MEINS. " »ù±¾¼ÆÁ¿µ¥Î»
perform bdc_field using 'MARA-MATKL'
record-MATKL. " ÎïÁÏ×é
perform bdc_field using 'MARA-BISMT'
record-BISMT.
perform bdc_field using 'MARA-EXTWG'
record-EXTWG.
perform bdc_field using 'MARA-SPART'
record-SPART.
perform bdc_field using 'MARA-MTPOS_MARA'
record-MTPOS_MARA.
perform bdc_field using 'BDC_CURSOR'
'MARA-GROES'.
perform bdc_field using 'MARA-BRGEW'
record-BRGEW.
if record-gewei = '' and ( salorg1 = 'X' or salorg2 = 'X'
or salplant = 'X' ).
perform bdc_field using 'MARA-GEWEI'
'KG'. " ÖØÁ¿µ¥Î»
else.
perform bdc_field using 'MARA-GEWEI'
record-GEWEI. " ÖØÁ¿µ¥Î»
endif.
perform bdc_field using 'MARA-NTGEW'
record-NTGEW.
perform bdc_field using 'MARA-VOLUM'
record-VOLUM.
perform bdc_field using 'MARA-VOLEH'
record-VOLEH.
perform bdc_field using 'MARA-GROES'
record-GROES.
condense record-EAN11 no-gaps.
if record-EAN11 <> ''.
perform bdc_field using 'MARA-EAN11'
record-EAN11.
perform bdc_field using 'MARA-NUMTP'
'HT'.
endif.
perform bdc_field using 'MARA-MAGRV'
record-MAGRV.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
'=ZU02'.
condense record-EAKTX no-gaps.
if record-EAKTX <> ''.
perform bdc_field using 'SKTEXT-SPRAS(2)'
'EN'.
perform bdc_field using 'SKTEXT-MAKTX(2)'
record-EAKTX.
endif.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
'=MAIN'.
if record-meins <> 'PAK'.
perform bdc_field using 'SMEINH-UMREN(05)'
'1'.
perform bdc_field using 'SMEINH-MEINH(05)'
'PAK'.
perform bdc_field using 'SMEINH-UMREZ(05)'
'1'.
endif.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endform. " GENERALDATA
*& Form generaldata2
Ò»°ãÊý¾Ý 2
--> p1 text
<-- p2 text
FORM generaldata2.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX.
perform bdc_field using 'BDC_CURSOR'
'MARA-NORMT'.
condense record-ferth no-gaps.
if record-ferth <> ''.
perform bdc_field using 'MARA-FERTH'
record-FERTH.
endif.
perform bdc_field using 'MARA-NORMT'
record-NORMT.
perform bdc_field using 'MARA-WRKST'
record-WRKST.
perform bdc_field using 'MARA-ZEIAR'
record-ZEIAR.
ENDFORM. " generaldata2
*& Form salorg1
ÏúÊÛ×éÖ¯ 1
--> p1 text
<-- p2 text
FORM salorg1.
condense RECORD-SPART no-gaps.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'MAKT-MAKTX'
RECORD-MAKTX. " ÎïÁÏÃèÊö
IF K NE 'K'.
perform bdc_field using 'MARA-MEINS'
record-MEINS. " »ù±¾¼ÆÁ¿µ¥Î»
ENDIF.
perform bdc_field using 'MARA-SPART'
record-SPART. " ²úÆ·×é
perform bdc_field using 'MVKE-DWERK'
record-DWERK. " ½»»õ¹¤³§
PERFORM BDC_FIELD USING 'MG03STEUER-TAXKM(01)'
RECORD-TAXKM. " ÎïÁÏË°·ÖÀà
condense RECORD-VRKME no-gaps.
IF RECORD-MEINS <> RECORD-VRKME and RECORD-VRKME <> ''.
perform bdc_field using 'MVKE-VRKME'
record-VRKME. " ÏúÊÛµ¥Î»
select single * from MARM where matnr = record-matnr
and meinh = record-vrkme.
if SY-SUBRC NE 0.
tmp = 'W'.
select single * from t006 where MSEHI = record-meins.
if t006-DIMID = 'AAAADL'.
DIMID = ''.
else.
DIMID = t006-DIMID.
endif.
select single * from t006 where MSEHI = record-vrkme.
if dimid <> t006-DIMID.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0510'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMZU-UMREN'
record-VMREN. "ÏúÊÛµ¥Î»×ª»»Òò×Ó
perform bdc_field using 'RMMZU-UMREZ'
record-VMREZ. "»ù±¾µ¥Î»×ª»»Òò×Ó
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
endif.
endif.
ENDIF.
perform bdc_dynpro using 'SAPLMGMM' '4200'.
perform bdc_field using 'BDC_OKCODE' " µ÷ÓÃË°Àà×ÓÆÁÄ»
'/00'.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' " ·µ»ØÏúÊÛ×éÖ¯ 1ÆÁÄ»
'/00'.
ENDFORM. " salorg1
*& Form salorg2
ÏúÊÛ×éÖ¯ 2
--> p1 text
<-- p2 text
FORM salorg2.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'MVKE-KTGRM'.
PERFORM BDC_FIELD USING 'MVKE-VERSG'
RECORD-VERSG. " ÎïÁÏͳ¼Æ×é
PERFORM BDC_FIELD USING 'MVKE-KTGRM'
RECORD-KTGRM. " ¿ÆÄ¿ÉèÖÃ×é
PERFORM BDC_FIELD USING 'MVKE-KONDM'
RECORD-KONDM. " ÎïÁ϶¨¼Û×é
perform bdc_field using 'MVKE-MTPOS'
RECORD-MTPOS. " ÏîÄ¿Àà±ð×é
PERFORM BDC_FIELD USING 'MVKE-MVGR1'
RECORD-MVGR1. " ÎïÁÏ×é 1
PERFORM BDC_FIELD USING 'MVKE-MVGR2'
RECORD-MVGR2. " ÎïÁÏ×é 2
ENDFORM. " salorg2
*& Form salplant
ÏúÊÛ£ºÒ»°ã/¹¤³§Êý¾Ý
--> p1 text
<-- p2 text
FORM salplant.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
select single * from marc where matnr = record-matnr
and werks = record-werks.
if SY-SUBRC NE 0 OR MARC-MTVFP = ''.
PERFORM BDC_FIELD USING 'MARC-MTVFP'
RECORD-MTVFP. " ¿ÉÓÃÐÔ¼ì²é
endif.
PERFORM BDC_FIELD USING 'MARA-TRAGR'
RECORD-TRAGR. " ÔËÊä×é
PERFORM BDC_FIELD USING 'MARC-LADGR'
RECORD-LADGR. " ×°ÔØ×é
perform bdc_field using 'MARC-XCHPF'
record-XCHPF. " ÅúÁ¿¹ÜÀí
ENDFORM. " salplant
*& Form PURCHASEDATA
²É¹ºÊý¾Ý
--> p1 text
<-- p2 text
form purchasedata.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MARC-WEBAZ'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX.
IF K NE 'K'.
perform bdc_field using 'MARA-MEINS'
record-MEINS. " »ù±¾¼ÆÁ¿µ¥Î»
perform bdc_field using 'MARA-MATKL'
record-MATKL. " ÎïÁÏ×é
ENDIF.
condense RECORD-BSTME no-gaps.
IF RECORD-MEINS <> RECORD-BSTME and RECORD-BSTME <> ''.
perform bdc_field using 'MARA-BSTME'
record-BSTME. " ¶©µ¥µ¥Î»
select single * from MARM where matnr = record-matnr
and meinh = record-bstme.
if SY-SUBRC NE 0 and
( record-vrkme <> record-bstme or tmp <> 'W' ).
tmp = 'W'.
select single * from t006 where MSEHI = record-meins.
if t006-DIMID = 'AAAADL'.
DIMID = ''.
else.
DIMID = t006-DIMID.
endif.
select single * from t006 where MSEHI = record-bstme.
if dimid <> t006-DIMID.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0510'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMZU-UMREN'
record-UMREN. "¶©µ¥µ¥Î»×ª»»Òò×Ó
perform bdc_field using 'RMMZU-UMREZ'
record-UMREZ. "»ù±¾µ¥Î»×ª»»Òò×Ó
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '4000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
endif.
endif.
ENDIF.
perform bdc_field using 'MARC-EKGRP'
record-EKGRP. " ²É¹º×é
perform bdc_field using 'MARC-WEBAZ'
record-WEBAZ. " ÊÕ»õ´¦Àíʱ¼ä
endform. " PURCHASEDATA
*& Form MRP1
text
--> p1 text
<-- p2 text
FORM MRP1.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX. " ÎïÁÏÃèÊö
IF K NE 'K'.
perform bdc_field using 'MARA-MEINS'
record-MEINS. " »ù±¾µ¥Î»
ENDIF.
perform bdc_field using 'MARC-DISGR'
record-DISGR. " MRP×é
perform bdc_field using 'MARC-MAABC'
record-MAABC. " ABC±êʶ
perform bdc_field using 'MARC-DISMM'
record-DISMM. " MRPÀàÐÍ
perform bdc_field using 'MARC-FXHOR'
record-FXHOR. " ¼Æ»®µÄʱ½ì
perform bdc_field using 'MARC-DISPO'
record-DISPO. " MRP¿ØÖÆÕß
perform bdc_field using 'MARC-DISLS'
record-DISLS. " ÅúÁ¿
perform bdc_field using 'MARC-BSTFE'
Here is a sample program which creates a material with the bare minmal fields, this will get you started.
report zrich_0003 .
data: headdata type bapimathead.
data: clientdata type bapi_mara.
data: clientdatax type bapi_marax.
data: descdata type table of BAPI_MAKT with header line.
data: return type bapiret2 .
data: returnm type table of bapi_matreturn2 with header line.
data: xmara type mara.
parameters: p_matnr type mara-matnr.
headdata-material = p_matnr.
headdata-ind_sector = 'M'.
headdata-matl_type = 'FERT'.
headdata-basic_view = 'X'.
clientdata-BASE_UOM = 'EA'.
clientdatax-BASE_UOM = 'X'.
clientdata-old_mat_no = 'Old Material'.
clientdatax-old_mat_no = 'X'.
clientdata-division = '00'.
clientdatax-division = 'X'.
descdata-LANGU = sy-langu.
descdata-MATL_DESC = 'This is the description'.
append descdata.
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
headdata = headdata
clientdata = clientdata
clientdatax = clientdatax
* PLANTDATA =
* PLANTDATAX =
* FORECASTPARAMETERS =
* FORECASTPARAMETERSX =
* PLANNINGDATA =
* PLANNINGDATAX =
* STORAGELOCATIONDATA =
* STORAGELOCATIONDATAX =
* VALUATIONDATA =
* VALUATIONDATAX =
* WAREHOUSENUMBERDATA =
* WAREHOUSENUMBERDATAX =
* SALESDATA =
* SALESDATAX =
* STORAGETYPEDATA =
* STORAGETYPEDATAX =
importing
return = return
tables
MATERIALDESCRIPTION = descdata
* UNITSOFMEASURE =
* UNITSOFMEASUREX =
* INTERNATIONALARTNOS =
* MATERIALLONGTEXT =
* TAXCLASSIFICATIONS =
returnmessages = returnm
* PRTDATA =
* PRTDATAX =
* EXTENSIONIN =
* EXTENSIONINX =
check sy-subrc = 0.
Regards,
Rich Heilman -
regards,
still need the t-codes for the following:
Batch Input: Physical Inventory document for cycle counting, vendor consignment,project stk and ABC Analysis for cycle counting. thanksIM level see:
MI01 Create Physical Inventory Document
MI02 Change Physical Inventory Document
MI03 Display Physical Inventory Document
MI04 Enter Inventory Count with Document
MI05 Change Inventory Count
MI06 Display Inventory Count
MI07 Process List of Differences
MI08 Create List of Differences with Doc.
MI09 Enter Inventory Count w/o Document
MI10 Create List of Differences w/o Doc.
MI11 Recount Physical Inventory Document
MI12 Display changes
MI20 Print List of Differences
MI21 Print physical inventory document
MI22 Display Phys. Inv. Docs. f. Material
MI23 Disp. Phys. Inv. Data for Material
MI24 Physical Inventory List
MI31 Batch Input: Create Phys. Inv. Doc.
MI32 Batch Input: Block Material
MI33 Batch Input: Freeze Book Inv.Balance
MI34 Batch Input: Enter Count
MI35 Batch Input: Post Zero Stock Balance
MI37 Batch Input: Post Differences
MI38 Batch Input: Count and Differences
MI39 Batch Input: Document and Count
MI40 Batch Input: Doc., Count and Diff. -
Trans. ME32K. Batch Input. Problem in header versions with container
Hi all:
I've got a problem with the transaction ME32K.
The required action is meant to be changing the address delivery in the agreement position.
The bapi BAPI_AGREEMENT_MAINTAIN doesn't solve the problem because the field adrn2 is not present in this function module, so refering to other posts I've decided to implement a batch input.
The problem starts when I try to introduce REVOK and RSCOD in grid container in section header version. When I simulate the transaction ME32K with shdb the only code appearing is:
SAPLMEDCMV 0200 X BDC_OKCODE =GRIDENTER
BDC_SUBSCR SAPLMEDCMV 0100SUB0
SAPLMEDCMV 0200 X BDC_OKCODE =SAVE
BDC_SUBSCR SAPLMEDCMV 0100SUB0
and then the values 'X' in REVOK and '0007' in RSCOD are not recognized.
How can I introduce the new version in header ?
Thanks in advance.
Jose Luis.Hi Jose,
did you find a solution for your issue?
I have the same problem now.
Greets,
Valentin
Maybe you are looking for
-
USB drive attached to Airport Extreme as a time machine backup?
I have a WD 750gb external USB drive that I was using as a "time machine" with my iMac. My Airport Extreme has a USB port and I want to move the WD over to there, but continue to use it as time machine. Possible to do this? If yes, then how? Thanks m
-
I have more contacts on my iPhone than Outlook
I have 479 contacts on my iPhone (some are duplicates) and 450 in my Outlook contacts. I would very much like the 29 that are on my iPhone to be in Outlook. I have sync'd multiple times and cannot seem to resolve this. I've noticed the "Replace in
-
Report on Workcenter performance, capacity and requirement
Hi All, Could any one tell me how to build a report on workcenter performance and workcenter requirement and Capacity. Is there any standard cube available for this? I already checked 0PP_C03 and 0PP_C13. I'm not sure whether these will suffice or no
-
List of all queries in the system
Hi all <b>I want to get a list of all QUERIES in my BW system and the details of the DATA TARGETS (cube or ODS) on which they are made.</b> Can i get it from any TABLE or TRANSACTION? or will i have to go to each query ( grouped by INFOAREA) to do th
-
Hi all, Jdev version(11.1.1.3.0) I have a <af:table> with a check box.I can select the rows by checking check box and delete those rows. Sometimes am facing a problem in deleteing the rows. The viewobject that binded to the table,is based on two Enti