Change FC Group IP Address

I have a 3 node failover cluster that I think needs an IP address change because the current cluster IP address is on my Node Management network.
Here is my network config:
FC Internal Communication
10.24.24.0/24, Cluster Use: Internal
FC Live Migration
10.25.25.0/24, Cluster Use: Internal
iSCSI Traffic
10.23.23.0/24 Cluster Use: Disabled
Node Management
10.20.20.0/24 Cluster Use: Enabled (also allows clients to connect
The cluster IP Address is 10.20.20.200, which of course means it sits on the Node Management network.
I want to disallow cluster use of the Node Management network, but that network hold the IP Address of my failover cluster, so as soon as stop allowing cluster network communication on that network, my cluster IP Address fails
Is it best practice to have the cluster IP address set on a network dedicated to cluster communication? If so, how can I change the address of a running cluster?
Thanks for any help you can offer,

Hi,
take a look:
http://blogs.technet.com/b/chrad/archive/2011/09/16/changing-hyper-v-cluster-virtual-ip-address-vip-after-layer-3-changes.aspx
http://OpsMgr.ru/

Similar Messages

How To Change Order of Email Addresses in Address Book / groups / Mail?

Many records in my address book have multiple email addresses.
No big deal but I wonder if there is a way to tell Address Book / Mail which address to pick as the default.
For example I send a litttle news email one a week to a group of contacts. I want to send this email to people's personal -- not business -- email address. I've created a group in Address Book and type that group name in my Mail to line and the group pops up. But a few of the records pick the corporate address and I have to go in and change those addresses.
I just tried editing one record ... I deleted both "work" and "home" addresses from a record. Then reentered them "home" first, "work" second. But when I closed the edit Address Book listed them in the original order (maybe alpha).
Any ideas?
Thanks

jayessemm wrote:
I wonder if there is a way to tell Address Book / Mail which address to pick as the default.
Address Book: Edit > Edit Distribution List…

ITunes sync doesn't recognize changed groupes in Address Book

iTunes sync doesn't recognize changed groupes in Address Book. What to do?
I've cleared All Contacts on the iPad2 so it is blank now. I want to sync just a particular new group which is the combination of two former groupes which didn't sync correctly.

To be more clear (in hopes you can get it to work!) :
Under Mail -> Preferences -> Composing
1. Be sure to CHECK the box that says autocomplete addresses under the Addressing heading.
2. Quit Mail and restart.
If that doesn't work then I would suggest quitting Mail and trashing the Preference file (~/Library/Preferences/com.apple.mail.plist). Then restart Mail and make sure the box is checked as above and restart Mail. Note that all preferences will be reset to the default and you may need to reconfigure Mail the way you like it. You can always drag the plist file back and restart Mail.app to restore your previous settings.
Ed

How can I organize groups in Address Book while running iCloud under Lion?

I am frustrated with the new Address Book for many reasons:
It is no longer possible to view groups, list, and cards at the same time, just groups and list or list and cards. This means it is very cumbersome to organize cards to multiple groups, something that wa relatively easy before. Why not allow us to see all three at once and conveniently drag and delete?
The individual cards do not list what groups each card belongs to. Why didn't Apple include a list and a way to change the group when editing cards? Do any of the Apple programmers actually use their own programs to make them useful and convenient?
While running iCloud addresses are duplicated (one set "On My Mac" and another "iCloud"). While it is possible to view only one set or the other, I found that it is best to backup and then delete the "On My Mac" cards and groups. Even then it is confusing to navigate and move cards around.
The iCloud synch with my iPod is working well, but I have to synch my older iPhone 3G with a cable. (will not run OS X v 10.7 Lion).
The iCloud address book is not synching properly with Yahoo, but rather the Yahoo address are being pulled over to the "On My Mac" set that had been removed. Why can't we set controls of pushing or pulling data vs synching, as well as whether whether this is with the iCloud or "On My Mac" addresses?
The new address book format, while cute is too bright, hard to read and wastes a lot of space with white nothingness. Why can't we have a more attractive, easier to read, and functional address book format, with more ability to customize format for advanced users?
I suppose I may have answered my own question: basically it is possible to manage the groups as long is willing to put up with inefficiency and backs up manually by exporting the address book regularly as a backup (because so much can and does go wrong). Does anybody have more insight?

If you want to send a message to Apple, please submit it at:
http://www.apple.com/feedback/

Color code groups in address book

Is there any way to color code groups so that when mail comes in I know to associate it with a specific group. I was able to do this in entourage but have switched to apple mail.

As already described, create a new Rule in Mail.app (Mail -> Preferences -> Rules), that reads:
if (ANY) of the following conditions are met:
(Sender is member of group) (xxxxxxxxx)
Perform the following actions:
(Set Color) (Of Background (or text as you prefer) to (Any color you wish)
Save the rule.
Before doing that, you might want to create a few Groups (or Smart Groups) in Address Book with the people you want to color.
Hope this helps.
Message was edited by: Martin Marconcini (changed sqared brackets for parenthesis)

Re: change account group for vendor

hi expert,
i done the same which you mention in earlier form. i manage to change the account group for vendor master.
now there is an another thing came out that is for normal vendor i able to change the account group but there is another vendor which is one time vendor means for vendor i am going to from normal vendor account group to one time account selected account group so in this case when i am changing the group in xk07 the system is saying a following message.
new account group xxx is one-time group: change not permitted.
message no.F2692
so if anybody face the same problem give me your inputs.
thanks in advance,
kk.

Hi KK,
For normal vendors, you cannot change the account group to 'One time vendor' group. The one time vendor group will have most of its felds suppressed in the master data. You have to enter the Name, address etc. only at the time of invoice posting.
But your normal vendor will have the name and address details in the master data itself. So, there will be inconsistency in the field status of the normal vendor account and the one time vendor account.
Hence, the system may not allow you to change the vendor group.
Regards,
Mike

4.0.8.2.4 Cannot start listener after changing user/group to nobody/nobody

Installed OAS 4.0.8.2.4 and configured it. Everything is working fine with listener, plsql cartridge, Java cartridge and OSSWA. But if change listener's user/group from Oracle/Dba to nobody/nobody. Listener will not start. It hangs in as follows:
========================================================================
Information: Listening on NORM port 80 address 0.0.0.0
Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
Information: Adapter services initialized successfully
Information: The server started successfully
Server now running as process 15654
OWS-08850: Oracle Web Listener 'www' started.
Oracle Web Listener 4.0.8.2.4 Enterprise Edition - Release (Domestic)
Copyright (c) Oracle Corporation 2000. All rights reserved.
Information: Listening on NORM port 5502 address 0.0.0.0
Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
===========================================================================
from the message above, we can see if it failed to start the "Adapter services"
If we change the user/group back to Oracle/Dba, it starts fine.
And also, we have under $ORACLE_BASE/admin, the listener ( name devl ) permission has been changed accordingly to the user/group change. We follow the instruction from OAS configuration to change user/group.
( Read access to the configuration file
Read access to all files that provide content for servicing requests
Read access to all imagemap files
Execute access to all Oracle Application Server binaries and program files that the Web Listener must execute
Write access to the log and error files
Read access to user directories )
Thanks.

Thanks. After a few more days testing. We finally figure out where it went wrong. We changed user/group from node manager. ( from Oracle/dba, installer, to nobody/nobody). After that, we only changed $ORACLE_BASE/admin/ows/SITE_name/httpd-host_name/listener_name to be read and write accessed by nobody. We forgot to change owl.cfg to be read access to nobody/nobody. After we changed that. It starts fine.
Thanks again.

Prevent change of Ship-to address in Sales Order entry ?

We want to be able to prevent users from changing the Ship-to address in either VA01 or VA02, if the Ship-to has a specific Account Group. I am aware that we could do a check in a userexit, but our preference would be to grey-out the address fields if someone went to Goto->Header->Partners, and double-clicked on the Ship-to Partner.
Do anyone know if it's possible to do this in config ?
Thanks, paul.

This can be very well done. As i succeded in doing in my project
Goto-SHDO
enterVA01 and do go on till u get the partner address tab and there u select Wcontent display and save
and again take VA02 and do the same procedure and save it
And also dont forget to activate in SHDO nor it will not work
hope this will clear u
Sri

Sending to a group: Which address for member with multiple addresses?

Hi. I've created a Group of people to send emails to. Some of these people have more than one email address. How do I change the default email address for individuals within a group?
Thanks!

Searching for "group address" (without the quotes) in Address Book Help would lead you to the following article:
Selecting which addresses to use for members of a group
iMac G5 17" (iSight) Mac OS X (10.4.4)

How do I isolate a group in address book - or other solution

History: I used my MAC to print Christmas card envelopes and wanted them to be addressed as "The Smith Family" but I do not want the original contact card to read that way. I set up a new "group" that was my Christmas card list and copied all the addresses over but, when I change the name it changes it in all groups.
Is there any way to isolate a group within address book so I can keep a different name on the same card?
If not, is there a field or way that I can print a different name than what is on the v-card? Another annoyance is that I used the "children" field but, when I printed an envelope it added them tot he end in a senseless fashion. I had to move all "family" information to the general comments.
Thanks in advance.

There is only one set of data for each contact. A group is, effectively, a list of contacts, rather than a copy of a set of contact data. When you change a contact's details in a group you are making the change in the only copy of the contact's data.
One suggestion for address labels recently was to put eg The Smith Family in the company field, and at Christmas time run quickly through the cards marking the company flag - this could be easily automated in Applescript.
Even though it goes against the grain to have multiple copies of information, I keep the details for Christmas cards in a separate Excel spreadsheet. Address Book I use for email addresses and phone numbers.
AK

I added a group to Address Book, but it doesn't show up in Mail addresses. Why?

I added a group to Address Book, but it doesn't show up in Mail's addresses. Why? In the past, any groups I added to Address Book or changes I made in Address Book showed up in Mail's addresses, but not this time.

Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown?

Using a smart address group from Address Book

I might be asking sth already been answered but I cant find it, so sorry, but how do you send an email to a group of contacts who have been grouped by a Smart Group in Address Book? Address Book's help says
If you don’t have a group of addresses, create one.
Creating groups or foldersChoose File > Send Updates.
In the dialog that appears, select the group or groups you want to notify.
Type a subject title and a message, and then click Send.
The trouble is that Send Updates is grey-ed out - see below!
What? How am I meant to follow those instructions if the menu option is grey-ed out?
Helen.

Helen,
In your original question, your screen shot shows that the active application is AddressBook, and you are trying to use its File menu. The option you discuss is for sending updates of your own address card, not for sending out group emails. In other words, if you change your own contact details in AddressBook, you can send the new contact details out using this menu option. I hope that this is what you intended, rather than simply sending out an email to a [Smart] group as others have discussed.
However, I cannot get the 'Send Updates' option in the File menu to be disabled in the way you have managed. I note that you are still in the edit mode on the current contact in the screen shot (the Edit button has blue text instead of black). I also note that 'Save' in the File menu is enabled, implying that you have a currently unsaved change somewhere. Maybe one of these issues is preventing you sending out your new contact details.
I expect by now that you have sorted this out yourself. If not, have you tried closing AddressBook and re-opening to resolve the unsaved issue?

Want Firefighter to use group email address

Can Firefighter be configured to use a group email address for automated emails? I have not been able to figure this one out.
Thanks.

Clark,
FF does indeed reference the user's email address from within the User Master record.
You therefore have the following options:
1. Create a dummy User ID with the generic email address maintained.
2. Assign multiple individual controllers to the appropriate IDs as then all named individuals will receive the log reports.
3. Send to a single controller and use external email delivery settings to auto-forward the emails to the required destinations.
4. Change an existing controller's email address within SU01 to reflect the generic email address required - PLEASE DON'T DO THIS though as the email address is also used by other SAP Functions and it is not good practice to deliberately mis-represent user's details.Send to a single controller and use external email delivery settings to auto-foward the logs to relevant recipiants.
You may find, depending on the SP level, that if you add an additional email address into the user master, the Firefighter notification gets delivered to both email addresses. This works in SP06 but unfortunately, the log report does not!
Have fun, Simon

Cannot send email to Smart Group from Address Book

I created several Smart Groups in Address Book but I can't use any of them to send email. When I right-click the group name and choose Send Email, it opens my default email program (Thunderbird) and puts only the name of the Smart Group into the To: field, not the actual addresses.
If I try to actually send the message, I get the error that (name of group) "is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the email."
What am I doing wrong? How can I get it to paste the actual addresses and not just the name of the group? I looked at the Edit Distribution List window and all the addresses are there.
I'm using OS X 10.5.7, Address Book 4.1.2 and Thunderbird 2.0.0.22.
Thanks in advance.

What is the exact message you get when sending fails -- does it say there are one or more invalid addresses, or what?
Having a name in the list without email address or possibly one separated by comma between last and first might result similarly in an invalid address, and Mail will likely refuse to send to any. But if the message is from the SMTP, that might depend on the provider's policies for that.
Ernie

I need to change my e-mail address in the app store to enable me to get updates and buy more. How does this happen??

I need to change my e-mail address in the app store, how does that work??

On apple website, seraching on support, the article HT1918 explains.
Log into your apple ID and edit your personal information, where email can be changed as well. All applications as itunes stores, apple store and icloud use this same apple ID, so be aware of this.
I hope I was helpful !

Change FC Group IP Address

Similar Messages

Maybe you are looking for