Change FI doc number range indicator from internally to externally assigned

Hi,
I created a new numberrange for 2011 but did not check the Ext (external number range indicator).
When I try to change it to external by trying to mark the option, it does not work.
What can cause this ??
Thanks in advance,
regards
Peter

Hi,
check your settings in FBN1 for the number range. if the document number was assigned intially as internal and you are changing the setting in the next year system would not allow the change.The setting of No range is Co code specific if you change in one co code you will have to change in the other co codes.
Please check and let me know.
Regards
K.R

Similar Messages

  • PO number range- change from internal to external  and then change it back

    we have following situation- we had certain issues with the system where most of the data got curreptrd except data relative to procurement for dates March 7 to March 30.  We have extracted the procurement data - PR / PO etc for the dates March 7 to March 30 and we want to upload this data in the uncorrupted enviornment dated  March 6 using the old numbers originally assigned by the system.
    I need to change the configuration for PR and PO number range from Internal to external so we can upload PR and POsfrom March7 to March 30 and then swich the number ranges back to internal so we can enter new data dating from March 31.
    What is the best way to do this?
    Thanks in advance
    Raj

    Hi
    Create external number range and assign  it to theno. range external in that Document type then you can use both internal and external number ranges for that doc without disturbing the system once completed remove the external number for that doc type. while creating the PO give the number you want before saving so that the PO will be saved with the number you had given.
    Note: Make sure that you are not using duplicate PO no already assigned
    Kiran

  • Change from Internal to External Number range for customer account group

    Hi,
    We would like to change the number range assignment for a customer account group from internal to external. The external number range assignment check box is greyed out as a few numbers in the range have already been used up.  We want to do the internal to external assignemnt change, create a customer of a specific number, and revert the range back to internal assignment. Is this possible?
    Appreciate your help.
    Ram

    Hi,
    Please do the below steps:-
    (1) Go to XDN1 and click on "Maintain status" button. Note down the current status and change the status to zero. Save.
    (2) Again go to SDN1 and click on "Maintain No. Range" button, and change the no. range to external. Save. (if that number range is maintained for multiple years, then make it external for the first yer and for the subsequent years, it will become automatically.)
    (3) Then create your customer with specific number.
    (4) Then go to XDN1 and click on "Maintain No. Range" button, and change the no. range to internal. Save. (if that number range is maintained for multiple years, then make it internal for the first yer and for the subsequent years, it will become automatically.)
    (5) Again go to XDN1 and click on "Maintain status" button. Maintain the current status as the number noted down in step (1) above. Save. (In case number created in step (4) is greater than the number notes in step (1), maintain the number of step (4) in current status.)
    Regards,
    Gaurav

  • How to change number range from internal to external?

    Hi Experts,
    I have changed the number ranges for accounting document for company code (A1) external to internal and posted one accounting document using the tr.code FBN1. Now i need to revert back the changes for the number range from internal to external. i am not able to cancel the accounting document as its cancellation accounting document? please let me know any other way to change the number range from external to internal?
    Thanks & Regards,
    Raj

    Hi Siva,
    Thanks for your reply. But my expectation is any other way to change the number range from internal to external instead of going new number range (By taking any technical help)?

  • Create document number range 22 using internal number assignment

    Hi friends,
    now i am working upgradation project from 4.7 to 6.0. sandbox i created one Asset, After that i posed amount to that asset by using f-90.now i run depreceation in ABAF T code the bellow issue is comming
    Create document number range 22 using internal number assignment
         Message no. AA776
    Diagnosis
         Processing terminated because the document number range 22 for year 2011
         was set up with external number assignment.
    System Response
         For periodic posting of depreciation, you have to create a document
         number range with internal number assignment, since the document numbers
         are assigned from Financial Accounting.
    Procedure
         Change the number assignment for the number range 22 from external to
         internal in Customizing for Asset Accounting. See SAP Note 890976 for
         more information.
    But no ranges for that particular year having, if any changing that one it s not come edit or deleating
    ple any one help me
    Regards
    Gangadhar reddy

    Hi Gangadhar,
    after 4.6C the Internal Number Range was changed into external Number Range due to technical requirements.                                                                               
    As the error messages due to posting manual into the affected  number ranges could not be hindered in this case with ERP2005 the desicion was made to rechange to internal number range. Note 890976 describe what to do here.                             
    regards Bernhard

  • Create document number range 03 using internal number assignment in AFAB

    Hi Experts,
    Where i have to create number range to Depreciation Posting ? Please mentain Transaction code .
    I had check T Code:AS08 (No Tick is assign)  & FBN1 (Intrenal Tick is assign)
    I am doing T Code AFAB
    Folowing error coming
    Create document number range 03 using internal number assignment
    Message no. AA776
    Diagnosis
    Processing terminated because the document number range 03 for year 2011 was set up with external number assignment.
    System Response
    For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
    Procedure
    Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
    Waiting for reply
    Regards,
    Girish

    locked.  please read the error message and search the IMG (very easy).

  • Best Practice for Change Maintenance Order Number Range

    Hello
    We have decided that our Maintenance Orders will always start with the year of the open date. Example 201112345155
    Every year we will need to change the number ranges
    What is the best practice to change the order number range? What is the best approach here?
    I have also another question. Why the "Current Number" is not incremental?
    Thanks for the help

    Hi,
    The current number can be explained by use of buffering of the numbers. Buffering is defined via transaction SNRO, the  AUFTRAG object is relevant for orders. When buffering is active, a set of unused numbers are assigned to each application server.
    In your example -  The fiirst 20 numbers were taken from the available number range and assigned to the buffer (possible 10 numbers to each of two servers). As orders are created a number is assigned from the buffer. Once the buffer values are used a further set of numbers are taken from the number range and the current number is increased (by buffer value).
    -Paul

  • Documents manually posted within dep.doc.number range

    Hi All,
    I am running the AFAB and this error message is displayed.
    "Documents manually posted within dep.doc.number range"
    I am using the document type AF with the external number range
    AF     2008     1120000000     1129999999
    Do you have any idea what is happening?
    Thanks in advance,
    Miguel.

    Hi,
    I experience the same thing and I'm using ver 4.6C. I've tried to insert the additional number range in FBN1 but I have to remove the extenal number indicator first before I can enter the number.
    But when I want to run the depreciation, I've got another error i.e. please create number range as external number. So i believe there is no effect.
    When I check in TABA, the number range still maintain the same.
    Please help coz my user need to view their asset balance urgently.

  • Error Number range 10 is internal, do not enter a personnel number

    Hi guys, When I try to hiring new emp this message appear Number range 10 is internal, do not enter a personnel number. Why this message appear. I still want to use this emp number. TQ

    Hi,
    While hiring an employee if you want the personnel number to be given by you then go to PA04 maintain number range and mark as external.
    Go to NUMKR feature and assign your Interval No: to your employee sub group & save it.
    Then go to PA40 and enter the Number and maintain the rest of the Info types
    Regards,
    Abhee..

  • Number range 01 is internal, do not enter a personnel number

    Hi,
    Im using PA40, and when I propose a personal number, the transaction sends this message "Number range 01 is internal, do not enter a personnel number"...  BUT I NEED to propose a personal number for my employees!!!... is it possible???!!!...
    Can anybody help me?...
    Thanks in advance!.
    Alfredo.

    hi alfredo
    see "Number range 01 is internal, do not enter a personnel number"... " if the message comes like this that means that particular number range is set for the internal number range i think so you are giving the personnel number if you remove that personnel number in IT0000 then save this case if you want to take the personnel number internal. if you want to take your personnel number then go to pa04 and assign personnel number range make it as external in the last column you can see there check box just click on that check box. and assign this same personnel number range (for ex you have given in pa04 07-00000000-10000000) the 07 in my example you have to assign in the numkr feature in TCODE PE03. in that assign countrygrouping-company code-personnel area-personnel subarea-ee group-eesubgroup- number range 07. i hope it is clear
    bye
    naveen

  • Delete a number range Group in internal order

    Dear experts!
    Now, I'm getting some issue about maintain number range group in internal order.
    So I defined a number range group, after that I want to delete the number range group. How do I have to do?
    Best regards, Huy

    Done the question!

  • Change Request Documents Number Range

    Dear All,
    For the transaction type SDCR & SDHF i have maintained Internal number range & un tick the early no assignment option. For few days there was no problem, but when i seen today, few numbers were missing for both CR & UC. When i checked in SNRO / SNUM the buffer maintained is 10. I dont want this skipping of CR & UC numbers in between. Hiow can i restrict this ? If i made buffer as 0, is there any issue will create ?
    regds,
    CB

    Hi,
    when declaring a transaction  type in SPRO under ChaRM node, 'Define Transaction Types', Under 'Transaction Numbering' you can choose to check 'Early No Assignment'. If you do that, then Solman reserves a number for a new transaction each time you create a Document in CRMD_ORDER. If you do not save the ticket; then : number will be lost and Solman will go to the next one.
    Thats how you have missing numbers in the interval you defined
    Hope this helps
    Regards
    Khalil

  • Number Range Split from external to internal generation

    Dear Expert,
    Currently we have various customer account group for which single below number rang 02 is assigned. Client has sub-range slab which assigned to different account group, unfortunately this is setup was not setup in SAP system. Hence whenever user wanted to create new customer in particular group they look for last account number used in that sub-goup and then input account number. Now client want to shift everything in auto-generation and wanted to use same sub-range number in continuation. which I am finding difficulties since last number used from the 02 number range is 202102 and I am not sure how system will react if I delete existing number range 02 and then split with different number range and what will be the implication on existing records?
    Looking for the assistance!
    E.g. Setup: External Number
    Customer Account Group        Number Range       (sub range - manual excel)   Number used so far   
    A0001                                    02                         200000 to 201999               201150
    A0002                                    02                         202000 to 202999               202102
    Thanks & Regards,
    Prashant Rane

    Hi Abdul,
    Currently there is one number range assigned to both customer group and now we wanted to split and change to internal assignment. In below case A0001 should use next number 201151 and A0002 next number should be 202103? second group A0002 is possible by ending last number as 202102 in number 02, but how I will achieve group A0001 to generate next number as 201151?
    E.g. Setup: External Number
    Customer Account Group        Number Range       (sub range - manual excel)   Number used so far   
    A0001                                    02                         200000 to 201999               201150
    A0002                                    02                         202000 to 202999               202102
    Thanks & Regards,
    Prashant Rane

  • CO doc. number ranges

    Dear all
    Its very urgent issue regarding CO Number Range.(bus. transaction COIN)
    we are working on testing client. Here when we create any CO document, system generates document number.We can see this document in relationship browser but we couldn't see in KANK in current number status.This is already 1000 documents created up to now but in current no. status system showing 0 document(zero).
    On sandbox client it is OK means showing correct doc. number.
    Is this because of improper year end closing or is there any other prob.
    Plz help me out.
    Any help would highly appreciable and full points rewarded.
    Regards
    nilesh

    Dear.
    Has your odd client copied from other ? Then, maybe caused some system conflict.
    If not, please check following.
    1. CO document number range length 10 digit. (ex. 100000 (x) -> 0000100000 (o) )
    2. Whether No.buffer set or not. (Tcd : snum -> input 'RK_BELEG')
    Regards.

  • Change domain in number range

    Hi, Do you know how to change the "number length domain" of a "number range object"?
    We have a number range object using the domain "char7", it means 7 digits width, and we
    need to extend to 9 digits. The field "number length domain" is now disabled in SNRO transaction.
    Thank you and best regards,
    José

    Hi Brad Bohn, thanks for your response.
    We need to keep intervals for "historical information" purpose.
    The field "Subobject data element" has the name of the data
    element "ZEACSCTRLSEQ" that we use to store an ID that
    groups intervals, for example:
    - ID: 000001
      Intervals:
      01     0000001     0999999
      02     1000000     1999999
      03     2000000     2999999
    - ID: 000002
      Intervals:
      01     0000001     0000200
      02     0000201     0000500
      03     0000501     0001000
    - ...and so on...
    So we are looking for a process to change the width of
    the "Number Range Object" and its "Intervals" without
    deleting the intervals.
    ¿How could you do that?
    Best regards,
    José

Maybe you are looking for