Change fileed status Changable to Display For EXGRP field

Dear all;
In MIGO with Excise I want to make the Field EXGRP ie " Excise Group "  as Display Mode .
How to configure this .Kindly suggest .
Thanking You;
Regards;
Joydeep Mukherjee

Hi,
Pop-up of excise tab in MIGO is depend on your J1ID setting.
Please refer the below links.
Excise Tab in MIGO transaction
SAP MM -- error in MIGO & J1ia
Hope it helps you.
Thanks.

Similar Messages

  • Change brightness of spectral pitch display for quiet recordings

    Hello,
    I've found that for quiet sections of recordings, the spectral pitch display is almost invisible. Is there a way of increasing the brightness?
    Processing the audio to slap on an extra 10-30dB of volume is my workaround for the moment, but I'm not very happy with that. It means I have to alternate between the processed version to see the spectral display, and the original for actual work. The recording in question is a classical concert, so the difference between quiet and loud passages is sometimes substantial.
    Thank you,
    3p.

    Which version of AA?
    In CS6 (and I think CS5.5) there is an option under Preferences>Appearance to increase the brightness of the display.  Does this help?

  • How to change 'Number of items to display' for a list view programmactially?

    in CSOM would be perfect.

    I figured it out. var context = web.Context;
    var list = web.Lists.GetByTitle(listTitle);
    var view = list.Views.GetByTitle(viewTitle);
    view.RowLimit = rowLimit;
    view.Update();
    context.ExecuteQuery();

  • ALV Display for Quantity Field

    Hi All,
    I am working on ALV classes.
    I have a quantity field which needs to be displayed without decimals.
    When I declare the data type as type p decimals 0,It is displayed correctly but when I change the field with a value using the method handle_data_changed it gives a value multiplied by 10 always. i.e., when the new value is 5 it gives the value as 50.
    I tried referencing the Unit value but it doesn't work.
    Any views on suppressing the decimal values without getting the value multiplied by 10 is highly appreciated.
    Thank you in advance.
    Regards,
    K.S.

    Hello Kandasamy,
                                 Change the reference field that points to the ALV display field to a non decimal field and then use the Integer variable assignment for  removing the decimals  during teh BAPi or database fetch.
    Hope this answers your question.
    Thanks,
    Greetson

  • Negative sign display for CURR field in ALV grid report

    I have a field BETRG defined as CURR field of length 15, decimal places 2. The value may be negative or positive. In case of negative values I am using EDIT_MSK option in the field catalog to bring the negative sign to the left of the value as shown below.
    Quote
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          i_program_name         = sy-repid
          i_internal_tabname     = 'LT_FINAL'
          i_inclname             = sy-repid
        CHANGING
          ct_fieldcat            = fieldcat[]
        EXCEPTIONS
          inconsistent_interface = 1
          program_error          = 2
          OTHERS                 = 3.
    LOOP AT fieldcat.
        CASE fieldcat-fieldname.
            WHEN 'BETRG'.
            fieldcat-ctabname = ' '.
            fieldcat-cfieldname = ' '.
            fieldcat-edit_mask = 'RRV_______________.__'.
        ENDCASE.
        MODIFY fieldcat.
      ENDLOOP.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_buffer_active    = 'X'
          i_callback_program = sy-repid
          i_grid_title       = 'ABCD'
          is_layout          = gs_layout
          it_fieldcat        = fieldcat[]
          i_save             = 'A'
          is_variant         = gs_save
          it_events          = gs_events
        TABLES
          t_outtab           = lt_final
        EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
    Unquote
    On displaying the report using 'REUSE_ALV_GRID_DISPLAY' as shown above, when the value of BETRG is a smaller number like say 624, then the ALV output appears as '-            624.00' instead of '-624.00'.
    Is there any way that I can remove the space in between the negative sign and the number before displaying the ALV output using 'REUSE_ALV_GRID_DISPLAY'?

    Hi Deepak,
    I tried this and found that this doesn't work in case of currency field. Once you move back the char field (with negative sign to the left and condensed)  to the currency field, the negative sign again moves back to the right.
    I think that the only way a negative sign can be brought to the left of the currenct field is by using edit_mask of field catalog as I have shown above.
    Regards,
    Shayeree.

  • Service Requests in E-Service - Change the status of a request

    Hi All,
    We had setup a ICSS B2B web for return order management.
    We have a requirement that once the service request is created by the User "Customer service representative" he should be able to manually change the status of the request in the web such as " In process" ->"Rejected" or "Approved" ->"Completed.
    Please advise on how to proceed with the above requirement.

    Hello Yves,
    Thank you for this information.
    I'd like to tell you that, we are using a shared transport directory and the transport management system is configured properly.
    But I think that, changing the status of the transport requests (the field IMPFLG) in the table TMSBUFREQ would be a possible solution, although I'm not sure, if this is the right way.
    What I intend to do is the following: change the field IMPFLG ("tp Import Flag") for the transports, which have been already imported, but appear in the import queue with the status "Request waiting to be imported" .
    At the moment the field IMPFLG of these transports is set to "1" ("Request waiting to be imported") and I'd like to change it to "2" ("Request already imported") .
    Would it work like this? Will the correct status of the transport requests be displayed in the TRX STMS?
    Thank you in advance for your help.
    Kind regards,
    Noémi

  • How to change the status value?

    Hi Experts
    We landed in the starnge situation. We defined a multi task EE Monitor activity to change the status attribute to past due when particular internal event code is overdue. We forgot to assign the correct EE monitor Activity to EE Profile and the report /SAPTRX/EE_MONITOR converted the internal event code to overdue but did not change the status to past due for lakhs of records.
    Now we assigned the correct EE Monitor activity to the EE profile. How do we change the status to past due for already processed records? Is there any standard program available for this purpose or shall we need to write any custom program for it?
    Your quick response is much appreciated.
    Thanks
    Ravi

    Hi Ravi,
    the coding in the EE Mon activity SET_STATUS can be used as template. The method is unfortunately protected.
    It depends if you use EE History (Setting in EH Type Customizing). If yes it is importatnt to update also EE History table and the counter in the EH header for the History.
    Maybe the easiest way would be to send with a report messages to the EH and do the update in the rule set with the standard activity.
    You could use a new event code and react on it in the rule set.
    Best regards,
    Steffen

  • Urgent- PR filed Status

    Hi gurus,
    Please guide me how to change filed status in purchase requisition.
    Thanks

    pls follow:
    spro-mm-purchasing--purchase requisition-define document type---here u see the field selection assigned with the document type.
    no w again follow spro-mm-purchasing--purchase requisition-define screen layout at document level-select the field selection u have seen assigned with the document type-choose details-here in the next screen u select thefield selection group and choose (F2)-in the next screen u can select the field table as per ur requirement.
    regards,
    indranil

  • How to change the number of mails displayed

    I have two accounts on my iTouch..I know how to change the number of mails displayed for the exchanged account (being the second-added email account)...But I don't know how to change it on my account email... I only want the recent like 20 messages to be displayed... But after I was reading through my email (meaning that pretty much all my emails were downloaded).. I couldn't decrease the number of emails displayed on my account email anymore....

    Settings>Mail, contacts, calendars>Mail>Show Recent Messages. The least amount that you can set it for is 50 messages.

  • Change the status of WBS from REL to CLSD.

    How do I change the status of WBS element from REL to CLSD manually in the transaction CJ02.
    The top level WBS element is in REL state so whenever I create a new WBS it is automatically set to REL state.
    Please tell me how do I change the status to CLSD manually as this field is disabled for editing.

    Hi Abhishek,
    I presume that this may be the information massage. It is because you may be having your project end date (Actual finish) later in the year 2008 and you are trying to close the project before specified date of finish.
    Thanks
    Hemant

  • How to provide F4 help for a field in table control

    Hi Friends,
    I have requirement like below.
    1.Create one custom transaction code with header and item information.
    2.In item level, we will be designed table control to enter/display the data.
    3.Table control’s first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
    4.First user will enter material number in the table control’s first row’s first field and go to DOT number field.
    5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
    But for point number 5,  business wants like when ever user enters material number in table control first field then select DOT number’s drop down then they want to see the particular material’s DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
    Please see below example. 
    Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT number’s drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
    Could you please suggest me, how can we achieve this?

    Hello,
    Check this :-
    For POV
    Input Help in Dialog Modules
    You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
    PROCESS ON VALUE-REQUEST.
    FIELD <f> MODULE <mod>.
    After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
    Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
    F4IF_FIELD_VALUE_REQUEST
    Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the user’s selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
    F4IF_INT_TABLE_VALUE_REQUEST
    This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the user’s selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
    There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
    Input help in dialog modules
    REPORT DEMO_DYNPRO_F4_HELP_MODULE.
    TYPES: BEGIN OF VALUES,
    CARRID TYPE SPFLI-CARRID,
    CONNID TYPE SPFLI-CONNID,
    END OF VALUES.
    DATA: CARRIER(3) TYPE C,
    CONNECTION(4) TYPE C.
    DATA: PROGNAME LIKE SY-REPID,
    DYNNUM LIKE SY-DYNNR,
    DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
    FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
    VALUES_TAB TYPE TABLE OF VALUES.
    CALL SCREEN 100.
    MODULE INIT OUTPUT.
    PROGNAME = SY-REPID.
    DYNNUM = SY-DYNNR.
    CLEAR: FIELD_VALUE, DYNPRO_VALUES.
    FIELD_VALUE-FIELDNAME = 'CARRIER'.
    APPEND FIELD_VALUE TO DYNPRO_VALUES.
    ENDMODULE.
    MODULE CANCEL INPUT.
    LEAVE PROGRAM.
    ENDMODULE.
    MODULE VALUE_CARRIER INPUT.
    CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
    TABNAME = 'DEMOF4HELP'
    FIELDNAME = 'CARRIER1'
    DYNPPROG = PROGNAME
    DYNPNR = DYNNUM
    DYNPROFIELD = 'CARRIER'.
    ENDMODULE.
    MODULE VALUE_CONNECTION INPUT.
    CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
    DYNAME = PROGNAME
    DYNUMB = DYNNUM
    TRANSLATE_TO_UPPER = 'X'
    TABLES
    DYNPFIELDS = DYNPRO_VALUES.
    READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
    SELECT CARRID CONNID
    FROM SPFLI
    INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
    WHERE CARRID = FIELD_VALUE-FIELDVALUE.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    RETFIELD = 'CONNID'
    DYNPPROG = PROGNAME
    DYNPNR = DYNNUM
    DYNPROFIELD = 'CONNECTION'
    VALUE_ORG = 'S'
    TABLES
    VALUE_TAB = VALUES_TAB.
    ENDMODULE.
    The next screen (statically defined) for screen 100 is itself. It has the following layout:
    The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
    The screen flow logic is as follows:
    PROCESS BEFORE OUTPUT.
    MODULE INIT.
    PROCESS AFTER INPUT.
    MODULE CANCEL AT EXIT-COMMAND.
    PROCESS ON VALUE-REQUEST.
    FIELD CARRIER MODULE VALUE_CARRIER.
    FIELD CONNECTION MODULE VALUE_CONNECTION.
    When the user chooses input help for the individual fields, the following is displayed:
    For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The user’s selection is returned to the screen field CARRIER.
    For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the user’s selection into the screen field CONNECTION.
    For POH------------
    Field Help
    There are three ways of displaying field help for screen elements:
    Data Element Documentation
    If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
    For further information about creating data element documentation, refer to data elements.
    Data Element Supplement Documentation
    If the data element documentation is insufficient, you can expand it by writing a data element supplement
    Data element supplement documentation contains the heading Definition, as well as the following others:
    Use
    Procedure
    Examples
    Dependencies
    To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
    Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
    To display data element supplement documentation, you must code the following screen flow logic in the POH event:
    PROCESS ON HELP-REQUEST.
    FIELD <f> [MODULE <mod>] WITH <num>.
    After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
    If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
    You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
    For further information about data element supplement documentation, refer to Data Element Supplements.
    Calling Help Texts from Dialog Modules
    If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
    PROCESS ON HELP-REQUEST.
    FIELD <f> MODULE <mod>.
    After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
    The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
    HELP_OBJECT_SHOW_FOR_FIELD
    This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
    HELP_OBJECT_SHOW
    Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
    For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
    Field help on screens.
    REPORT DEMO_DYNPRO_F1_HELP.
    DATA: TEXT(30),
    VAR(4),
    INT TYPE I,
    LINKS TYPE TABLE OF TLINE,
    FIELD3, FIELD4.
    TABLES DEMOF1HELP.
    TEXT = TEXT-001.
    CALL SCREEN 100.
    MODULE CANCEL INPUT.
    LEAVE PROGRAM.
    ENDMODULE.
    MODULE F1_HELP_FIELD2 INPUT.
    INT = INT + 1.
    CASE INT.
    WHEN 1.
    VAR = '0100'.
    WHEN 2.
    VAR = '0200'.
    INT = 0.
    ENDCASE.
    ENDMODULE.
    MODULE F1_HELP_FIELD3 INPUT.
    CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
    EXPORTING
    DOKLANGU = SY-LANGU
    DOKTITLE = TEXT-002
    CALLED_FOR_TAB = 'DEMOF1HELP'
    CALLED_FOR_FIELD = 'FIELD1'.
    ENDMODULE.
    MODULE F1_HELP_FIELD4 INPUT.
    CALL FUNCTION 'HELP_OBJECT_SHOW'
    EXPORTING
    DOKCLASS = 'TX'
    DOKLANGU = SY-LANGU
    DOKNAME = 'DEMO_FOR_F1_HELP'
    DOKTITLE = TEXT-003
    TABLES
    LINKS = LINKS.
    ENDMODULE.
    The next screen (statically defined) for screen 100 is 100. It has the following layout:
    The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
    The screen flow logic is as follows:
    PROCESS BEFORE OUTPUT.
    PROCESS AFTER INPUT.
    MODULE CANCEL AT EXIT-COMMAND.
    PROCESS ON HELP-REQUEST.
    FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
    FIELD FIELD3 MODULE F1_HELP_FIELD3.
    FIELD FIELD4 MODULE F1_HELP_FIELD4.
    The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
    The following field help is displayed:
    When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
    If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
    When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
    When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
    Regards,
    Deepu.K

  • REPORT_ATTRIBUTE_ERROR_MESSAGE functionality for Input Field & Drop down UI

    Hi,
    We have requirement to handle error messages. In a data input form, if we get multiple errors we are displaying all errors in a message area. When we click on error message, focus should go to the UI element which causes to the error.
    We have used 'CALL METHOD lo_message_manager->report_attribute_error_message' by exporting the element and attribute name. This method works fine incase of Input Field type UI element. When we run the application on DISPLAY action errors are displaying for both fields 'INPUT FIELD' and 'DROPDOWNBYINDEX' . But we have URL on the error related to 'INPUT FIELD'  and when we click on error message control/cursor going to the INPUT FIELD.
    But we could not find same functionality incase of DropDownbyIndex UI Element.
    Please help us to resolve the problem. Does SAP Web Dynpro ABAP provide this functionality?
    Below attached written code for reference.
    CASE lo_action->name.
          WHEN 'DISPLAY'.
            IF lv_num1 IS INITIAL.
             report message
              CALL METHOD lo_message_manager-report_attribute_error_message
                EXPORTING
                  message_text              = 'Please enter the value'
                  element                   = lo_el_numbers
                  attribute_name            = `NUM1`
                params                    =
                msg_user_data             =
                is_permanent              = ABAP_FALSE
                scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
                msg_index                 =
                cancel_navigation         =
                is_validation_independent = ABAP_FALSE
            ENDIF.
            IF lv_age eq '999'.
             report message
              CALL METHOD lo_message_manager-report_attribute_error_message
                EXPORTING
                  message_text              = 'Please enter the age'
                  element                   = lo_el_personal_info
                  attribute_name            = `AGE`
                params                    =
                msg_user_data             =
                is_permanent              = ABAP_FALSE
                scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
                msg_index                 =
                cancel_navigation         =
                is_validation_independent = ABAP_FALSE
            ENDIF.
        ENDCASE.
    Thanks
    Venkat

    Hi venki,
    The problem you have told that when you are displaying the error message for input box and drop down by idx  using the report_attribute_error_message. Then you click on the error message raised by input box , the focus goes to the input box but the same thing will not happen with the dropdownbyidx.
    I have also try the same this its not working for dropdownbyidx but it is working for dropdownbykey.
    You can try this.
    Regard
    Manoj Kumar

  • W-5 Filing Status field in Federal Iview for ESS?

    Hello Guru's
    I am looking into having the 'Earned Income Credit' filing status field from infotype 210 - subtype FED to be displayed on the W-4 iview in ESS. Can someone provide me direction on how I can do this? We are using ECC 6.0 with EP 7 (ESS BP 1.0).
    Thanks,
    Mike

    You will need to create a WebDynpro Project for the DC ess/us/w4 and make the necessary changes & deploy it to the Portal.. assuming you have your NWDI & Dev Studio set up already.. evidently, you will need some Java expertise..
    ~Suresh
    P.S: if you think it is too much.. wait for others to pitch in with an easy solution

  • Why not all fields dimmed or show in display mode after system status TECO and CLSD for Project

    Dear All,
    When Sets the system status TECO or even CLSD all fields for WBS Elements are not goes to Display mode. User can still edit them or change then.
    The fields are:
    1. WBS Element Description, technical name: PRPS-POST1
    2. Person responsible number, technical name: PRPS-VERNR
    Other Progress and Customer enhancement tab pages for WBS Element all fields there also editable in TECO and CLSD system status.
    The client do not want to set LOCK system status for master data option.
    Is there any enhancement or standard way of doing that?
    Regards
    Saqib Usman

    Dear Saqib,
    Its a standard behavior of the system. In CLSD status, transactional data like Procurement gets restricted along with WBSE no and its scheduling details. But it allows to you change like WBSE desc./Responsible person.
    Also go thru the below link for clarification of WBSE system status:
    http://help.sap.com/saphelp_470/helpdata/en/ee/41f82246ee11d189470000e829fbbd/content.htm
    For locking all master data, as above experts suggest, you should use MDLK/LKD.
    Regards
    Shishir

  • MIGO Posting Date - Authorisation to Change/Display for Certain User ID

    Dear all
    There is this business requirement
    1. Warehouse users should not change the Posting Date of the GR refer PO. It is to avoid user from delaying their work to enter into SAP system the next day although they have received the goods today. As such, we should change the field status of POSTING DATE into Display mode.
    2. However, if the warehouse user has forgotten to enter on the GR Date, they have to go to their Warehouse manager to ask him to enter for them, since the field status: Posting Date is set to display.
    Question:
    I know how to set the field status of Posting Date to display, but will this field status will be applied as "display" for all the user id? If so, then how can I control only the Warehouse Manager can have the Change Mode for Posting Date?
    Thanks in advance
    Edited by: Daimos on Oct 14, 2009 8:37 AM

    Hi all
    I found out this can be done by assigning manager and store keeper to different Tcode with different field status:
    Warehouse Manager - MIGO_GR, field status of Posting Date: Required
    Store Keeper - MIGO, field status of Posting DAte: Display Only
    This will solve the problem!

Maybe you are looking for