Change form in report painter KE80

Hi,
Easy question maybe but I can't find the solution...
How is that possible to change the report of the form I have created in KE85 ?
I have used a standard report and I would like to use another one for my form.
Thanks in advance for your help,
Ronan

Hi,
I would like to change the assignment of the form.
Yet it is assigned to a standard report and I would like to assign it to a report I have created.
Ronan

Similar Messages

  • Change Table in Report Painter

    Hi Experts,
    I have some Report Painter reports assigned to a Library.  I would like to change the table.  Is there a a way to change the table without re-writing the reports?  I can add a new table, but do not know how to remove the existing table without affecting the report. Does any one have an idea? Please advice.
    Thanks
    Kingsley

    Hi,
    I would like to change the assignment of the form.
    Yet it is assigned to a standard report and I would like to assign it to a report I have created.
    Ronan

  • Changing header in report painter

    Hi All,
    I have a requirement to change the header(column). I am using the global variable &5PY(Period/Year) in the characterictics value. So it displays an output like 06.2008. But the client needs this to be displayed as June 2008.
    Kindly help me out with this.
    Regards,
    Karthik

    In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

  • Change color on Report Painter

    Dear gurus.
    Pls give idear about Report painter.
    Now I am making comparson report between planned data and
    actual data on report painter in order to check variance between them.
    Column1: Planned data
    Column2: Actual data
    Column3: Variance between Column1 and 2
    Then, I want to change the font color of Column3 only in
    case that the variance over the criteria such as 10,000 $.
    Do you know how to do it on report painter?
    I don't care whether "Change color" or "make font Bold" or "Font blinking".
    My purpose is to give warning to report's readers which record
    they have to read carefully.
    BR
    yoshitada

    Dear Sadashivan
    Thanks for your info.
    I tried the way you mentioned.
    However, the thing I want to do is not to change the font color of specified column.
    The thing I want to do is to setup the threshhold such as percentage or amount
    and emphasize the data which over the threshhold by changing the color
    automatically.
    Thanks anyway.
    BR
    Yoshitada

  • How to change order of report painter columns

    I have a report which shows the columns in one order when in design mode in GRR2 but when the report runs, the columns display in a different order.  When in design mode, you can see the actual output order by clicking the form overview button and selecting the columns tab.
    I am trying to figure out how to set the column order, short of deleting all the columns and recreating them.
    Does anyone know if there is an easy way to do this?
    Thanks all!
    Bob

    Doug,
    using MDC with SAP is ok. Try the following:
    - Use SE14->Edit->Storage Parameter->For new creation and specify the ORGANIZIE BY DIMENSION clause.
    - Go to the change-mode for the table in SE11. Switch to the 'Fields'-Tab and select the complete second line. Then click on 'Cut'.
    - Now select the first line in the same way and click on 'Paste'. By doing so you moved the field at position 2 to position 1.
    - Save the changes, click on 'Check' and, if that succeeds, click on 'Activate'.
    Hope that helps.
    Regards,
                                 Johannes

  • Difference between Form & Report Painter

    Hi Experts,
    What is the difference between  Forms and Report painter reports? (My understanding is that Forms for PCA and Report painter for Cost Center).
    Could also any one provide me the like related to SAP Documents to create Report Painter & Forms reports
    Thanks in Advance
    Gowsi

    <b>Form painter</b> is a term used in SAP Smart form context
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/83fb48df8f11d3969700a0c930660b/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/83fb42df8f11d3969700a0c930660b/content.htm
    http://www.thespot4sap.com/articles/Code_CostCentreReport.asp
    <b>Report painter</b>
    A tool for creating reports that meet specific business and reporting requirements.
    The Report Painter enables you to report on data from various applications. It uses a graphical report structure that forms the basis for the report definition. When defining the report, you work with a structure that corresponds to the final structure of the report when the report data is output.
    The SAP System is delivered with several row and column models that can be used as building blocks to help you create reports quickly and simply.
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
    Regards
    Vivek
    *Assign points for all the useful answers

  • Reg: how to change layout in report writer

    HI all,
    how to change layout in report painter?
    regards
    JK Rao

    Hi everybody,
    I have a report painter using transaction ke30 and I want to change the header layout.
    Now it looks like that
    |_________|_________|
    But i want to add another header row above this row, so it will look like:
    |_________________________|
    |___________|_____________|
    Does anyone know the answer?
    Thanks a lot for your response
    Edited by: Vo Duy Pho on May 24, 2010 10:29 AM
    Edited by: Vo Duy Pho on May 24, 2010 10:37 AM

  • KE30 Report Painter did not same structure account balance

    Dear All,
    I generated a form from report painter KE30 (it was P/L report which for management) ...  and the report was shown ...
    My question is can I know which data was assign to the value ...
    Example : In P/L .. on Direct Overhead field ....when I generate KE30, it'll shown its value ... (I wanna know .. How can I assign value to it ?)
    Yet in KE35, I know that "Direct Overhead field " when I did double klik, it appeared Value field " Direct Overhead " .... with " Process cell : No special cell processing " on the " xxx.xxx.xxx " which refers to value when I run KE30 ...
    And yes I know about create Value field " Direct Overhead " (from SPRO--> controlling --> profitabilitas analys ) ... but didn't know the value which assign on it ...
    And I can saw it profit center ... The problem is because my structure account balance didn't have same profit with the report from KE30 and I knew that the different from overhead ... Is there any kind solution that I must take or perhaps trace and do to make them same ...
    Thanks & Regards,
    David SIndhu
    Edited by: david_sindhu on Nov 26, 2010 9:07 AM

    Dear All,
    I Mean I just wanna know about the value .... why they can appear on ... the relation with GL ...and how the assignment the value to the field in KE30 ..
    About KE24 yet I try follow the line but it appears to secondary cost element ... and double click on it and follow by "integration with co doc " it appears to cost element secondary ...
    Any Idea about the relationship with GL ? cause My profit is different ..
    BR,
    David

  • Report painter only done in PROD

    Dear all,
    We have one issue on PROD ,
    we have One report painter on PROD,but tha same is not there in DEV, QA . Actually which was done on only PROD , we need to customise that report
    I thing they have done on PROD only (bcoz which was done by previous support company)
    what should i do ...now FI consultant needs to change that specfic Report painter ....
    we have to customize  that report (specfic Report painter )
    can we make make copy from PROD to QA ?
    can we make that specfic Report painter from PROD to QA ...
    Regards
    Sathies

    > can we make make copy from PROD to QA ? ... you can  copy complete customizing and transaction data.
    >
    > can we make that specfic Report painter from PROD to QA .?....... You can do it but you have to change your production server details in SCC4 tocde. you have to create Transport request and you have change transport strategy................
    >
    Regards
    Siva

  • Report Painter form issue

    Hi
    I have changed the form layout in KE85 for one of our report painter report. I have transported the changes to quality. The form changes are appearing as per Development but the screenlayout is not changed.
    Is there anything else I should do like import, or generate the report etc. If so kindly let me know the details.
    Thanks
    N Sankar

    Hi Franc
    Thank you very much for your valuable input. But my report does not have report group. It is a report created by using a form in KE84. This form is attached to a t_code and the same transported to quality. In quality the form changes are appearing in the form. Whereas when I execute the form changes are not called.
    This is what confusing me a lot. Can you please guide me on this.
    Thanks
    N Sankar

  • Report Painter Report Form Query

    Dear All,
    I have developed report painter change form with fsi6 .TCode and "form" type is financial statement Key figures.
    My query is that i need difference or two rows with minimum values but no negative values to be displayed. example should be
    row1 figure -1
    row2 figure 2
    row3 difference of row1 & row2 figure 0
    Kindly suggest with proper solutions.
    Thanks in advance
    Usman

    Hi Usman,
    Salaam!!
    You can at best supress the zero values or reverse the signs.. But you cant display -ve values as zero in report painter
    Regards
    Ajay M

  • Report painter-syntax error form 'SEL-L023' already exists

    Hi,
    When i copy a report painter form and generate it to the same report group (same as source report) i get an error 'syntax error form 'SEL-L023' already exists. I saw the ABAP code the source and target have same form name.
    Where can i change the form name?
    Thanks

    I will closed this thread as I hv solved my problem already.thks

  • Unable to create a report painter form (Message no. KH205).

    Dear all,
    I am trying to create a report painter form, but the system gives an error:
    Key figure scheme  contains errors -> check definition
    Message no. KH205
    Diagnosis
    Entry   not contained in Table T237A.
    Procedure
    Check key figure scheme  (in particular line 9062) in table T237A.
    I checked in Tcode KER1 but did not find any Key figure scheme.
    Afterwards, I checked table T237A and T237 and found out that number of hits in table 237A is less than in T237A.
    I think this is the reason why system has such reaction.
    Please help me with this issue.
    Best regards,
    Linh.
    Edited by: tvlinh on Mar 7, 2012 11:22 AM
    Edited by: tvlinh on Mar 7, 2012 11:22 AM

    Hi,
    This issue can occur if you have transported the Key Figure Scheme (KFS) from another system and /or deleted value fields. Has this happened ?
    To fix the issue you need to renumber the T237 in the source client executing the function module RKE_FILL_TABLES_T237FF as mentioned in the note 13838.
    After this try to create a new form and check if that works. If there are still problems with the existing form/report then the best
    way might be to delete and create again
    regards
    Waman

  • Change font size and layout of reports in Report painter

    Hi,
    I want to change the print layout and the fonts of reports created in Report Painter.
    In the print output i am getting 40% of the total screen
    My requirement is to increase the font size and the print layout to fullscreen so that the report layout fits to the page.
    Kindly help.
    Parin

    Hi,
    Well i generate a report which has two three columns.....
    1) Description
    2) Column 1 for fiscal year 2009
    3) Column 2 for fiscal year 2008 for comparison
    Here after these columns we have unformated space as a column.
    Now we tried to hide this column but the system is not allowing to hide this.
    How can we remove this unformatted column/space from the print output.
    Thanking you,
    Parin

  • How can I change reports in report painter.

    Dear Consultants,
    I need to change report according to client requirment.
    1, Lay out change in std report.
    2, How can I customize report to get cost element group wise with sub totals one by one.
    Please tell me how to do it step by step, I'll will award full points.
    Kind regards,
    Arvey.

    Dear Arvey,
    1. Layout can be changes by going into report painter change transaction GRR2, selecting the report (by double click) and then going to Formatting-->Report layout.
    2. Second question is not very clear to me. pls provide more detail.
    Regards,

Maybe you are looking for