Change from an older Power Macintosh 7200/90 to a new iMac or Mac Pro

On my Power Macintosh 7200/90 using Mac OS 8.0 I have stored a lot of very sensitive data which I cannot afford to loose. My machine works very good at this moment, however, I want to buy a new one like an iMac or a Mac Pro with the new generation of . Of course, I use a very powerful backup-program with an external hard drive and a Retrospect-backup program. Nevertheless, I want to further use my Office suite and other useful programs like i.e. the retrospect-software.
My questions now:
-- Is it possible to buy a new Mac and clone/mirrow everything from the old machine to the new one except the Operating System ?
-- Is there any store close to Koblenz, Germany who is knowledgeable enough to provide this service for me provided I buy a new Mac ?

Accessing Backup data:
Your 7200/90 uses SCSI drives, so an external drive is likely to be a SCSI drive. A newer Mac that can accept a PCI SCSI card would be required to read backup data directly off a SCSI drive. A MacBook would NOT be able to do this easily.
According to this article, Retrospect 6.1.138 supports Mac OS X 10.5 Leopard. So it appears that there is a way to restore your backup data using Retrospect:
http://kb.dantz.com/display/2n/articleDirect/index.asp?aid=9628&r=0.6172602
This site and this article may also be available in German or French.
Accessing the original data:
• If your WLAN Base Station has an available RJ-45 Ethernet port, you can add the 7200 to your existing Network and use Apple File Sharing to copy the files to your newer Mac.
• Shared Disks and Directories appear as a Hard Drive Icon on the Desktop of the Mac initiating the Sharing, and can be copied using the Finder Drag and Drop.
• Apple File Sharing works on Macs from System 7.5.3 through the current version of Mac OS X. To Share with Macs running 7.5.3 through 8.6, you must start File Sharing at the Older Mac.
• The software for File Sharing is included with Mac OS, and may already be installed.
106657- Mac OS 8, Mac OS 9: File Sharing This article is also available in German and French.

Similar Messages

? changing from an older computer to a new one. LR will not recognize my serial number. Help please

I am changing from an older computer to a new one. I downloaded LR on the new one but It will not accept the serial number. Hepl please

make sure you're properly 'installing' lr using the installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have an iPod whose contents I want to transfer to a newer Ipod. At some stage I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again? I stupidly synced the wrong one.

I have an iPod whose contents I want to transfer to a newer Ipod. At some stage when I thought I was syncing correctly I wasn't so I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again?

Have you not got a backup of your content on, for example, external drives ? If not then you could have a look to see if any of the utilities mentioned in this old post still exist and work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893

Could someone suggest a procedure describing how I should migrate my iTunes files from old an older Motorola-based PowerMac to a new Intel-based Mac Pro?

My problem concerns migrating, or moving my iTunes files from a Motorola-based G4 PowerMac OS X 10.4.11 iTunes 9.2.1 (4) to a new Intel-based Mac Pro running OS X 10.8.4 iTunes 11.0.4.
Context Summary:
1. Migration assistants on my old and new macs are not compatible.
2. My older mac has my iTunes library stored on an external firewire disk.
3. Part (but not all) of my iTunes files are also resident/stored on my iPod classic.
4. Finally, I need OS X 10.4.11 on my old mac and cannot upgrade it to OS X10.5.
Proposed method A: Is there a way to transfer my playlists from my Motorola Mac to my Intel Mac? If so, could I then connect my external firewire disk (containing my iTunes library) to my new mac, and then tell iTunes (on new mac) to use my iTunes library located on my external firewire disk?
Proposed method B: Would my chances for success improve if I used my iPod classic to transfer iTunes files from old Mac to new?
Worst Case Proposal C: I could start from scratch and recreate iTunes playlists and library on new mac.... time consuming proposal but it's possible. (Please don't suggest this proposal unless no other viable choices exist for me.)
Or have I missed something? Is there another procedure I should use?
Please advise, and thank you.

Hello Chris,
Answer to your iTunes library question: By iTunes Library, I mean my iTunes Media folder only; not the entire /iTunes/folder with iTunes media folder inside.
BTW: Your pointer to ht4889 was very helpful, and sharing the folder, then copying it over firewire interface from old to new mac was most useful.
However, now with my entire iTunes folder (including iTunes media folder) moved to new mac, I remain unclear as to how I should configure iTunes on the new mac so that it can know about and use these copied files. I understand using iTunes preferences, how to point iTunes to my media folder, but don't know what other iTunes operations are necessary for iTunes to pick up where I left off with my old mac.
Is there any file conversion necessary?
Or inside iTunes, should I:
File->Library->Organize Library? or
File->Library->Export Library? or
File->Library->Import Playlist?
Please advise and thank you again for your help.
As you might imagine, I put a great deal of time building my iTunes library, and would feel very blue if I need to build it again from scratch on my new mac.
So long for now.

From iMac to Mac Pro for the good of my Pro Tools 10...

hey guys,
here's the deal : it seems I'm at a turning point with my iMac (27", 3.1 Ghz i5, 4GB memory, 1TB hard drive, lion, PT10) and I'm thinking of buying a mac pro. Problem is, I'm not sure which model is best for my needs. I do postproduction work for television and I often have to work with pretty heavy projects.
My pro tools 10 keeps giving me the same 2 errors --
1- DAE can't get audio from the drive(s) fast enough. Your drive may be too slow, or fragmented, or a firewire drive could be having trouble due to the extra firewire bandwidth or cpu load. (-9073)
2- A CPU overload error occurred. If this happens often, try increasing the "H/W Buffer Size" in the Playback Engine Dialog, or removing some plug-ins. (-6101)
I might add, my Playback Engine's maxed out and I'm barely running any plugins (some 5 or 6 EQ3s, maybe 1 or 2 L2 and a Dorrough).
I have a MOTU Audio Express which is plugged in firewire and I'm running an external drive with my SFX on it, which is also plugged in firewire. The iMac having only one firewire plug (downsizing from the earlier iMac, for some obscure reason), I have a firewire hub.
I get the first error whenever I get too deep into a project and I start having a lot of SFX and I'm looking to add more and I get the second error whenever I try to run Dolby Media Meter.
I'm pretty aware I'm overrunning my iMac, so I'm willing to pay big bucks to get a computer that's best fitted to my needs and which I'll be able to upgrade every once in a while. Now, I'm just wondering what I actually need in a computer.
It's either the 3.2 GHz quad-core intel xeon, 6GB memory, 1TB HD or the two 2.4GHz 6-core intel zeon, 12GB memory, 1TB HD. I gotta say the second one seems kind of a lot... but I don't want to spend so much money and get a tiny upgrade from where I'm at right now.
So please! All of you mac wizards and other knowledgeable folks, HELP!

An i7 3.9GHz would do if you had 32GB RAM, an SSD boot drive, and 2TB hdd.
The sweet spot today on Mac Pro is $1800 4-core special and DIY to W3690 or W3680 6-core 3.33 or higher with 32-48GB RAM. And lots of SSDs and disk drives.
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
Refurbished 27-inch iMac 3.4GHz quad-core Intel Core i7
http://store.apple.com/us/browse/home/specialdeals/mac/imac/27
The Mac Pro line is at a - not ready to ship the new 2013 6,1 model / not ready with 10.9 that it will need / and current configuration is really 2010 3 yrs old (but also how well they hold up and mature).
You do not want to give up GHz for more cores. MHz still rules. Only reason would be if you planned to replace the processors for the fastest expensive (use to be, though changing) 4 or 6-core 3.4GHz for total of 8 or 12-cores, but never the 2.4GHz, no way.
The 2009 4,1 used is cheaper and can be found for $1000 and upgraded to 6-core and everything else (dual core upgrades are harder and not good to plan for.
And http://www.barefeats.com has done some tests on iMac and Mac Pro.
Graphics on Mac Pro, RAM and PCIe and SSD, hdd are easy upgrades.
This site has some great tips
http://www.macperformanceguide.com

Will microsoft office for mac 2004 transfer from my emac running 10.4.11 to the new iMac running mountain lion using migration assistant?

will microsoft office for mac 2004 transfer from my emac running 10.4.11 to the new iMac running mountain lion using migration assistant?

Microsoft Office 2004 will not work on any Mac running Lion or Mountain Lion. You will need to upgrade to Office 2011, buy the less expensive iWork apps from the App Store or use a free office clone like OpenOffice or NeoOffice.

I can´t connect Facetime calls from my Imac or Macbook pro, i can only make it from my iphone 4. why is that? in my imac and macbook pro i have OS X 10.8.5

I can´t connect Facetime calls from my Imac or Macbook pro, i can only make it from my iphone 4. why is that? in my imac and macbook pro i have OS X 10.8.5

FaceTime for Mac: Troubleshooting FaceTime - Apple Support

Upgrade from iMac to Mac Pro - RAID5 options?

I am currently using a 27" iMac 2.66 Ghz Core i5 for my main processing needs (RAW image file editing in Adobe Lightroom & Photoshop plus HDSLR footage editing in Final Cut) and am feeling constrained by my storage options (I don't like external enclosures but want a separate boot/apps drive from my media drive) so my only logical upgrade path is a Mac Pro.
My ideal solution would be to have a lightning fast boot/apps drive (SSD seems obvious choice) and then a RAID5 array of 3 large (2TB) drives to give me at least 4GB of media storage.
The problem is that when I go to spec a Mac Pro with a hardware RAID card (because I understand that software RAID under Disk Utility can only offer RAID0 or RAID1), I am told by the web configuration tool: "Solid-state drives are not compatible with the Mac Pro RAID Card in either RAID or Enhanced JBOD mode."
What I would like to know is whether this is an absolute technical limitation or is it just something that Apple does not officially support? This would be my main production machine so I don't want to implement any hacks.
P.S. reason for my current dislike of enclosures is the extra cables/space/noise/heat they generate and also the current debate over interfaces (would like to use eSATA or USB3 to get fastest transfer speeds).
Thanks in advance for any replies!

3 drives to me = RAID3
Apple Pro RAID card: find a good external - threads discussing options - look at AMUG reviews and elsewhere. CalDigit or something. Maybe RAID6 capability.
I would use internal drives in software RAID0.
And the only interface for external, SATA only cases, none of these consumer cases for multi interface, though OWC has a popular RAID5 4 drive setup you might like.
Use OWC SSD or two for system, and 3 x 2TB WD Black RAID0. No trouble with that. Just lots and lots of clones and backups is all.

Power Macintosh 7200 to Mac Mini back up and secure wipe question

Hi all, nearly figured this on my own but hope that someone here can fill in the gaps.
I have a clunky old 7200/75/16 (no upgrade card, bog standard machine) I want to sell/give/dump.
Before that, I need to back up the 500 MB HDD (hard to believe that was big once, now looking at a 500 GB HDD for the new machine!) and then secure wipe it.
I've learned that I can get halfway there with a crossover cable and Apple Talk. So far, so good.
Now, how about the secure wipe? I've had a look but I've not had any success in finding a how-to.
I have a feeling I can't use Disk Utility in Leopard for this, but maybe I am wrong.
Advice is sought from anyone here that can share their expertise on the best way to go.
A cheap/free solution (that doesn't destroy the machine) would be welcomed!
If relevant: I don't have the installer floppies for the 7200. I unwisely bought the machine without them but vaguely recall from an earlier Macintosh that Disk First Aid had some kind of format facility though I doubt it was far from secure by today's standards. I figure I can find a set of installer disks on eBay to get the 7200 operational again once I've completed this chore...

I've learned that I can get halfway there with a crossover cable and Apple Talk.
File sharing via AppleTalk cannot be used with the most modern operating systems. You should be able to use TCP/IP. A third-party program may be of interest. Also, see this article for some general information.
Now, how about the secure wipe?
One could use Drive Setup (a 1.7.3 version is available for download) for this. Under the Functions menu you will find Initialization Options, where "Zero all data" can be chosen. However, the program has to run from another disk (such as a bootable floppy). It is possible to create and modify a startup floppy on the 7200.
A third-party application such as Wipe Info (part of Norton Utilities, commercial) or Burn 2.5 (freeware) could be used, too.
If relevant: I don't have the installer floppies for the 7200.
The Disk Tools PPC (here) is one thinkable startup floppy for the Power Macintosh computer in question. If necessary, a complete System 7.5.3 (e.g., the International English version here) can be downloaded from Apple.
Jan

How do I take an iTunes library from an older HD and dump them into a new library on a Macbook?

I recently bought a Macbook Pro back in March 2012 to replace a deceased iMac G5. Assuming all my music was dead and gone, I began building my new library on my Macbook ever since. Recently, I was able to remove the hard drive from my older G5 and found out it still worked. Now my problem is that though I'm able to add all my old missing songs into my new Macbook, it's missing "Date Added, Plays, and Playlists". I tried copying over the "iTunes Library.itl" file, since I read that this is where all your info is stored, but it's asking me to replace the already existing iTunes Library.itl with the older one I'm trying to import.
Replacing the newer .itl file with the older will only create a new problem with the info of the songs that were already on my laptop.
Any one have suggestions?
Thanks a billion!

Hi there,
You may find the information in section External drive in the article below helpful.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
-Griff W.

Which external hard drive do i need to transfer my files from my G4 with OS 10.3 to my new iMac?

I have a Mac G4 PowerPC (with: processor speed of 1GHz, 1 MB L3 cache) running OS 10.3.9. I want to transfer my files from the G4 to my iMac (.21.5/2.5QC/2X2GB/500GB/6750M) which is still in the box, for the last 3 years. I believe it is running OS Mountain Lion. All the Mac-compatible external Hard drives i have looked at are for OS 10.5 or 10.7 and above. Are there any external hard drives for sale that will work with my OS 10.3.9 to transfer files to my iMac? If not, how can i do this transfer of files?

An external hard disk drive enclosure with FireWire400/800 ports, with others
may be able to be used; but not as an adapter from one kind of port to another.
The old iMac uses USB, perhaps as slow as 1.1; that won't work with newer
USB3.0; but both the newer and older computers could use FireWire; or maybe
ethernet for computer to computer.
Newest models have Thunderbolt data ports, so adapter cables are needed.
And then you'll need cables to match whatever combination you end up with.
{You may have tried something or another, but not posted back to say if you did.
And this thread is nearly two weeks old, now. I just happened to find it here.}
For what you suggest, you may be able to find a suitable cable, perhaps FireWire
or Ethernet, depending on the ports available and cables still applicable to both.
Does newer iMac have FireWire ports? You could buy a FW400 to FW800 cable where
the ends are different, if the newer machine has FireWire800. [The old one has FW400.]
This would have to be equipped with the protruding connectors so each could make
the connection between each computer's built-in ports. Not all cable sets do this.
This would be the fastest way to copy content between machines, if FW 800 in newer mac.
Port-powered external hard drives may be under-powered and fail to work, so that is why
I suggest enclosed HDD with its own AC power adapter that will not rely on FW or USB
for the power to run the drive and the electronics inside the enclosure.
example of external enclosures with multiple ports and its own power adapter:
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
This is an image of the lesser model series with fewer ports. The FW800 and USB3.0
are both backward compatible to their older counterparts, FW400 & USB2.0. But even
so the old 1GHz iMac G4 with USB1.1, would not be able to use newer USB3.0; yet
should be able to connect via FireWire400 to FireWire800 by special cable.
If the iMac G4 is still working, that's a plus. Attempting to remove the old IDE/ATA HDD
and access it outside the PowerPC iMacG4, is really a troublesome effort, one to avoid.
But the PPC iMacG4 can be started in Target Disk Mode and accessed as a hard drive
via FireWire cable, too. Then files can be seen as though the old Mac is an external HD.
In any event...
Good luck & happy computing!

Where can high-power video cards be installed on a first-gen Mac Pro?

I have a first-gen Mac Pro with a Radeon X1900 XT in Slot-1 and a Geforce 7300 GT in Slot-4. The x1900 XT powers a 30" monitor and the 7300GT powers 2 x 20" monitors. The 7300GT card died and is being replaced with an 8800 GT.
Now it seems fairly obvious that for gaming the 8800 GT is superior to my X1900 XT. Ideally I'd like to just throw my new 8800 GT in Slot-1 and use it for my 30" monitor and then run the 2 20's off the X1900 XT in Slot-4. The problem with that is that the x1900 XT is a huge card and physically won't fit in Slot-4 because it runs in to the hard drives above it.
*Now, on to the questions / clarification:*
_Question 1_: Is the first-gen Mac Pro the same as the new Mac Pro in that high-power cards can only be used in Slot-1 and Slot-2? If so, why does it come in the standard configuration of:
Slot-1: x16
Slot-2: x1
Slot-3: x1
Slot-4: x8
It would seem that Apple purposely did this so you would run 2 high-power cards in Slot-1 and Slot-4 and keep them away from each other for heat reasons. The new Mac Pro has x16 bandwidth on Slot-1 and Slot-2 and it would make sense why they say to only install high-power cards in Slot-1 and Slot-2 for it.
_Question 2_: PCI-e configurations. There are a few ways I could tweak the configuration of the expansion slots to make this setup work. I'm curious as to which you would think is best:
*Option 1 (default PCI-e config, only works if a high-power card can be installed in slot 4):*
Slot-1: x16 - Radeon X1900 XT - 2 x 20" monitors for minor tasks / programs
Slot-2: x1
Slot-3: x1
Slot-4: x8 - GeForce 8800 GT - 30" monitor for major tasks / gaming
Now, the first issue is can the 8800 even run in Slot-4 due to the supposed power problem? If so, would there be a difference in performance for gaming at x8? I know this is backwards because you'd want the "primary" card to run on x16 but that's just not possible with this PCI-e configuration. If there is a difference in performance would an 8800 GT at x8 still run significantly faster in games than an X1900 XT a x16? I'd think so, but that's assuming the x8 isn't a real bottleneck.
*Option 2 (the only solution if the cards have to be installed in the first 2 slots):*
Slot-1: x8 - GeForce 8800 GT - 30" monitor for major tasks / gaming
Slot-2: x8 - Radeon X1900 XT - 2 x 20" monitors for minor tasks / programs
Slot-3: x4
Slot-4: x4
You still have the issue of the 8800 only running at x8 (if it even makes a difference, not sure). The benefit I see here is that instead of the X1900 XT dumping all of it's heat in to the 8800 GT (since heat rises) you have the 8800 GT on the bottom where it might run cooler. The X1900 XT would then also be limited to x8 but it's not even being used for gaming so it wouldn't matter at all. The X1900 XT is huge and would cover up Slot-3 but I don't use the other 2 slots so I don't mind.
*Option 3 (only works if Slot-3 can actually power an X1900 XT):*
Slot-1: x16 - GeForce 8800 GT - 30" monitor for major tasks / gaming
Slot-2: x1
Slot-3: x4 - Radeon X1900 XT - 2 x 20" monitors for minor tasks / programs
Slot-4: x4
This seems ideal only because this is the only setup that can get the 8800 to run at x16. The issue now is can Slot-3 run a high-power card? The card doesn't really NEED the power since it's just for running basic apps and not gaming. Again, the X1900 would cover up Slot-4 but it's not being used so no worries there.
*At the end of the day, the most important thing to figure out is:* where can high-power cards be installed in a first-gen mac pro? Once we know that we can figure out Question 2. The instructions that come with the 8800 GT say it can be installed in any of the 4 slots, but I don't know if I really believe that.
Thanks in advance for your help!

Thanks for your help, I think we've beat this horse to death :P. I'm glad I got it all figured out though.
Now the only question is if the gaming performance of the 8800 is actually enough better than the X1900 to warrant making it my "primary" video card. As long as Adobe CS3 apps don't rely on core image like some of the Apple Pro apps do I think it will be fine. If they do I'd have to probably just stick with the X1900 since I use CS3 every single day and only play video games once a week if I'm lucky.
What are your thoughts on the X1900 vs the 8800 GT for CS3?
Edit: This just occurred to me... Since I'm going to have to run them as x8, x8, x4, x4 there isn't really going to be a "primary" card since neither will be at 16x. I guess I could technically just plug my 30" monitor in to either one of them depending on what I feel like doing. If I'm going to play a game I just plug in to the 8800 and if I'm working I plug in to the 1900. The computer is up on the desk so moving the monitor from one card to the other takes about 10 seconds. I could just plug 1 20" monitor in to each so there's always a free DVI port on either one.
It's not the most elegant but I guess it would be a good compromise if I wanted the "best" performance in either situation. I realize the Radeon 3870 is probably the best of both worlds but I really don't want the noise. I already modified my 1900 with this after 6 months of listening to the lawn mower that was the stock 1900 cooler: http://www.arctic-cooling.com/vga2.php?idx=147
I'm just hoping the 8800 isn't too loud .

How can I transfer older Claris Works and AppleWorks files to new iMac. I use Pages, and MacWord, Excel, etc. as well.

March 20, 2013
I have a new iMac using Pages and Microsoft Word, Excel, etc. for mac. I'd like to transfer older ClarisWorks and AppleWorks files to my new computer. Can this be done?

Additionally, Numbers can read/open spreadsheets. However, anything done in the drawing/painting part cannot be read by any application - you would have to export those (on the old machine) as a .jpg or pdf. You could then open them, but no longer edit or change the content.

From iMac to Mac Pro for video work.. suggestions please!

Hello all! Soon I'll be upgrading from my 2.66 GHz quad core iMac with 4gb of RAM to a new Mac Pro. The idea is to increase my productivity with applications such as After Effects & Final Cut Pro by hopefully decreasing time spent rendering/buffering/burning. The iMac has been working really well all this time, but a bit faster would be better!
I have about $4,000 to work with for a new machine. I welcome your thoughts on the best bang for my buck, be that a new/refurbished from Apple or used from eBay. Thanks everyone!

The Hatter has provided his insights as well as some excellent links.
The performance of the 2009 and later models is nearly twice that of the previous models with the same specs due to architectural changes including Hyper Threading.
All the Xeon Macs are keeping their value very well, and that means there are very few real deals on eBay.

How can I buy Mountain Lion from an unsupported laptop? I want to install it on a Mac Pro but it doesn't have an OS to open App Store

I have a MacBook Classic that is unsupported and my Mac Pro is supported but I can't open App Store from it because there's no OS and I can't purchase from my classic because it's unsupported. Halp

Buy Snow Leopard for your Mac Pro, update it to 10.6.8, purchase and download Mountain Lion. There is no other solution.

Change from an older Power Macintosh 7200/90 to a new iMac or Mac Pro

Similar Messages

Maybe you are looking for