Change from display attribute to compounding attribute

Hi,
I have 3 info objects as display attributes of another infoobject. I want to change them to be compunding attribute instead of display attribute but I'm not able to delete them from the attributes list. Please let me know how can that be done.
Thanks
Nitika

Hi,
you need to empty the master of the IObj for which you want apply your changes.
Delete its master data.
Of course you'll need to delete first all the objects (cubes, ods, or other IObjs) where this IObj is used...
hope this helps...
Olivier.

Similar Messages

Error while changing the Display Attribute into Navigational Attribute

Hi all.. Gud Mrng.
I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
Error Message: u201CThe Info object is being used in several data targetsu201D
My Questions:
i) Do I need to delete the data from all the data targets (where this info object is using)??
ii) Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
Thanks in advance.
Thanks & Regards,
B Venugopal

Hi Garima
Only in case of key figures we cannot change it from display to navigational.
If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
I am sure you know that these settings only mean if a IOBJ can be used as display or navigational. To use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
Cheers
Umesh

Why did the Share dialogue change from display in a frame to not displayed in a frame

Hello,
SharePoint 2013 via TFS install package which installed SharePoint Central Administration v4 and a default SharePoint team site. This is my system:
When I initially started working with my default SharePoint Team Site (SharePoint - 80) and clicked on SHARE, I was able to see the Share dialogue in a
popup frame. I added a single user to the site. I also stopped the site in order to start the Default Web site; I had to do that because I guess both sites are default installed
with the same port number. Then I stopped the Default Web site and restarted the default SharePoint Team Site. I have no idea if these steps are related, I just thought I should mention them.
I later noticed that the Share dialogue no longer appears in a pop-up. Instead I get the following:
Why did this change? Can I change it back? (It's not important to me to change back, I just want to know if I can). If not, why not?
I also notice that this dialogue in a new window behaves oddly. After I add a group or user and click Share, the new window returns to a blank page. I have to close that page and reopen the Share dialogue to add another entity. Is this
normal?
Thanks.
Best Regards,
Alan

Not something i have observed.
if you can recreate the issue. check what you see in event log and ULS logs.
also share fiddler \ httpwatch traces

Display attribute is changed to nav in a cube.

I have change a display attribute to navigational attribute.
Now if I run a BEx report on this cube, I dont get values for this nav attribute.Instead of value the column is displaying 'not assigned'.
Please tell me what could be the reason?

Hi,
To change a display object to navigational attribute you need to make changes at two places.
1. At the infoobject maintaince level
2. Other at the infocube level.
Try to change at these two loactions.

Project Summary Web Part - Can you change the display criteria

Hi
Is there any way I can change the display attributes of the project summary web part so instead of showing Late Tasks (as in the MS Project status indicator), I only show tasks that should have started or tasks that should have finished (so avoiding the
% complete test)
Thanks
Sean

Hi Sean,
Following on from Guillaume's excellent advice, you also also consider JavaScript or custom web part / app part if the default summary web part does not provide what you need. A couple of simple JavaScript examples can be found here:
Project Information post:
https://pwmather.wordpress.com/2014/06/10/supporting-post-for-projectserver-2013-projectonline-project-fields-displayed-on-project-site-javascript-jquery/
Project Information script:https://gallery.technet.microsoft.com/scriptcenter/Server-Information-ab10fd63
Project Milestones post:
https://pwmather.wordpress.com/2014/05/12/projectserver-project-milestones-on-the-project-site-projectonline-ps2013-sharepoint-javascript-jquery-sp2013-office365/
Project Milestones script:
https://gallery.technet.microsoft.com/scriptcenter/Server-Milestones-f8be71b8
Project on a page post:
https://pwmather.wordpress.com/2014/10/26/project-on-a-page-for-microsoft-projectonline-ps2013-javascript-jquery-office365-sharepoint/
Project on a page script:
https://gallery.technet.microsoft.com/scriptcenter/Online-Server-on-a-page-1b1f14f5
Test these on test sites first before using on production sites etc. to make sure they work for you.
Hope that helps
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

PA30:Change and Display Mode

Hi Friends,
Can you Please provide me a solution for the Below Problem:
When I go to PA30 and try to CHANGE infotype 0001(Org Assmt),I get the fields "cost center,Position,job,org unit" in the Display mode I am not able to change those fields.
Where can i change(In the configuration) these fields to be changed from DISPLAY MODE TO CHANGE MODE.So that in PA30 I can change these fields in IT0001
Thanks In advance
Gopi Palleti

Hi,
You cannot change any of the field you mentioned in infotype 0001.
You can assign a position using action 0000 through PA40 or by using copy option infotype 0000 in PA30. This will be in edit mode.
Suggested to use PA40 so that all other relevant infotypes can also be updated accordingly.
Rest of the components (Objects Job, Cost Center, Org unit etc) has to be assigned to the respective position in PO13-->Relation ships.
Note: Take care of the dates.
Regards,
Pranitha
Reward if found Helpful

Is it possible to change the display value of a domain-based attribute?

Hello,
I've selected a domain-based attribute for one of the leaf member attributes in the same entity, aka parent id, since it's a self-referencing entity. However, I cannot find a way to display anything but the code value in the drop-down (see below).
Is there a way to change the display value so that I can choose the attribute from the entity from which I want the user to choose? In other words, I would like to display the hierarchy name instead of the code, which is really just the primary id.
Thanks in advance!
Ben Lezin

1. In the explorer page, settings dialog, you can change the display format to show only name.
2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
b. Make a Business Rule to update Name when HierarchyName is changed.

Display attributes from "global" and other entities in a single screen

As far as I know, in OPM attributes of only one type of entity can be added to any given screen.
As per of functional requirements of my current project Ihave to display attributes from more than one type of entity in some of the screens.
I found a workaround for entities which has only one instance (singleton entity in version 10.1), but couldn’t figure out how to display attributes of entities which has multiple instances.
For example:
We have an entity called “the child” which has many attributes. There can be more than one child instances defined in a given assessment session.
This particular screen should have attributes which belong to the "global" and "the child" instances.
(The names of all the children should be displayed on the screen as check boxes so the user can select the children who are affected by the global attributes displayed on the screen.)
Is this achievble in OPM 10.1?
SP1D3R MAN

Displaying Global attributes and nested entity level attributes on the same question screen cannot be done in OPM 10.1 with out-of-the-box functionality. It would have to be a custom screen. (FYI, I'm not a programmer so I can't advise on how to build such a custom screen.)
Before building customisations, you should also consider whether you really need to use an old version of the product. OPA 10.1 was released early last year; the current version is 10.3.

Names in Members field under the UNIX Attributes Tab have changed from standard format (i.e. John Doe) to the actual account name (jdoe)

Hello,
Names in Members field under the UNIX Attributes Tab have changed from standard format (i.e. John Doe) to the actual account name (jdoe). The only time this happens is if a domain account is deleted and the remnant of the account remains and has to be removed
manually. However all of the accounts, with the exception of any new ones recently added, now show the account name only. Any ideas on what caused this and how to fix it?
Thanks :)

Hi,
I have not heard from you for some days, currently I am providing the related article for you. Hope this will help you on this matter.
The UNIX Attributes tab does not appear in the Active Directory Users and Computers MMC snap-in when Server for NIS is installed in the domain
http://support.microsoft.com/kb/921913/en-us
Thank you.
Best regards,
Steven Song
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to display attributes in smartview through MDX

Hello Everyone,
I am trying to execute a MDX query in SV where I want to see the man months by individual project. I also want to see projects by level 0 of an attribute dimension. I got the first part working where I see man months by level 0 projects. However, I am not sure how can I make this query display the attributes too.
Here's my MDX -
SELECT {[OracleAcct].[Man Months]} ON AXIS(0)
, {([Tot_Project].Levels(0).Members)} ON AXIS(1)
FROM Aso_rep.Aso_rep1
WHERE
([Employee],
[Department],
[Currency].[USD],
[Exp_Type],
[Tasks],
[Period].[YearTotal],
[Scenario].[APF],
[Year].[FY11]
Thanks in advance !!

Hi all,
Thanks for the reply.
"Display attributes will also get displayed if you include the infoobject for which they are attributes."
Suppose for 0vendor the attr is 0sortl. By defualt it is display attr. I dragged in the query the 0vendor and its attr 0sortl and executed. It didnot displayed any values for this 0sortl
I changed it to Nav Attr. And rerun the query, it is displaying values.
In the first case i included Display attr and the infoobject for which it is attr in the query. Please explain me why it didnot displayed the values.
And after changing it to Nav attr it displayed the values.
Please explain me what happened actually.
Regards,
V N.

Row should be locked before getting an output stream from an attribute

I have table Worker with photo attribute (its database type is ORDSYS.ORDIMAGE, entity attribute type is OrdImageDomain).
I use standard display and edit renderer for displaying and changing ord-image attribute.
If I add new worker and set him photo, everything is OK.
But if I edit some existing worker and set them photo, while posting to database exception is thrown.
This problem began some time ago, after made some changes (like upgrade JDev, changing some AM configuration properties, and so on...), but I ca't reproduce right behaviour.
I use JDeveloper 9.0.3.2, database is Oracle8i Release 8.1.6.0.0, I tried reserved and stateful AM mode both (the same bad result), pesimistic locking.
Error occures inside Tomcat 4.1.27 and OC4J both.
Does anybody know any hint about this error...?
Than you very much
Jan
PS. Error message datail:
oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Update": SQL Statement "JBO-25040: Row should be locked before getting an output stream from an attribute.".
     at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:4542)
     at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:4422)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:3544)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2290)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2232)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1527)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:1693)
     at oracle.jbo.html.jsp.datatags.CommitTag.doStartTag(CommitTag.java:45)
## Detail 0 ##
oracle.jbo.JboException: JBO-25040: Row should be locked before getting an output stream from an attribute.
     at oracle.jbo.domain.BaseLobDomain.getOutputStream(BaseLobDomain.java:729)
     at oracle.ord.im.OrdDomainUtil.loadAndSetProperties(OrdDomainUtil.java:656)
     at oracle.ord.im.OrdImageDomain.saveToDatabase(OrdImageDomain.java:2325)
     at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:4521)
     at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:4422)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:3544)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2290)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2232)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1527)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:1693)
     at oracle.jbo.html.jsp.datatags.CommitTag.doStartTag(CommitTag.java:45)

Thanks for replay.
Yes, I use JDev wizard generated BC4J JSP app (it was generated inside 9.0.2 and then migrated to 9.0.3).
I changed inside it many things, but I thing no important.
I have for example copying record to history while editing, but when I disable it, the same problem occures.
I changed database - 8.1.7 to 9.2.0.2.0, but the same problem.
Any hint?
Thanks for any comment.

How to show display attributes like key and description in voyager

This question is on voyager connecting to SAP BI Query. I would like to show both key and description of the row member. It is mentioned in the guide that display attributes can be viewed and changed from the properties tab of the tab panel. But I didnt see any such option in properties tab.
Any solution for this?
Thanks
Raghu

It is a XI 3.0 version. I looked at Voyager user guide for XI 3.0 in page no 202. It is about Using Voyager with SAP
"Display attributes
Members have several string properties which are visible in Voyager:
u2022 Key
u2022 Short description
u2022 Medium description
u2022 Long description
u2022 Key and short description
u2022 Key and medium description
u2022 Key and long description
These string properties can be viewed and changed from the Properties tab
of the Tab panel.
Note: Key and text properties are concatenated into a single string, and are
therefore displayed in a single column or row caption field. They do not
appear as separate columns or rows."
Thank you very much.
Raghu

Can we change the View attribute of the Switcher through PERSONALISE PAGE?

Can we change the View attribute of the Switcher through PERSONALISE PAGE? I want this switcher to display another column. This switcher that i want to change is a seeded one. I have extended a VO and added a new attribute. I want this Switcher to display this new attribute. How can I acheive this.
Regards
Ali

When I do exactly that I get a .XLS file that when you open it and click Save As comes up in Single Web Page mode. When I change the type I get a much smaller file. I am doing exactly what you describe, but with different results. Is it possible that this is configurable?
Here is a screenshot of me exporting:
http://i879.photobucket.com/albums/ab359/jameyweare/problem1.gif
Here is the properties of the file. As you can see the size is 215kb This is actually a very small query for for demonstration purposes. I have queries that return 20k rows with 10 to 15 columns. This creates a spreadsheet that is over 20MB.
http://i879.photobucket.com/albums/ab359/jameyweare/problem2.gif
This next screenshot is of the Save As dialog from Excel. I have highlighted the file type that the file is currently saved in.
http://i879.photobucket.com/albums/ab359/jameyweare/problem3.gif
In this screenshot I have changed the file format.
http://i879.photobucket.com/albums/ab359/jameyweare/problem4.gif
Here is the new properties. The file size has decreased to 57.5kb. In the cases where I had files that were 20MB or greater (and took aver 10 minutes to open up), this process reduced those files to about 200kb.
http://i879.photobucket.com/albums/ab359/jameyweare/problem5.gif
Any help on this would be appreciated.
Edited by: Jaime Weare on Jul 17, 2009 3:38 PM

How can I call a plsql function from an attribute?

I have an attribute defined in an element. I want execute a PLSQL function from the attribute, and display the returne value with an HTML template.
I've defined the attribute's type like PLSQL, and I've put the called of the function in the value of the attribute, but it doesn't work. The only value I obtain is an URL (I think that is the URL of the function or someting like this).
How can I call to my function from the attribute and display the returnes value in the page?
Thanks.

Thanks, but it doesn't work. I have an attribute called ID_BOL and I want to associate a sequence to that attribute. I've created a function, with the sequence. This function return de value of the sequence. I want taht the attribute takes the value of the sequenece dinamically.
I've tried it, creating the type attribute like PLSQL, and calling the function from the attribute, but it doesn't work.
How can I return the sequence value to my attribute?
Thanks.

How to display attributes in the query

Hi frnds,
I want to show the attributes of material ( mat group , mat type ), vendor ( Sort field ) in the report.
We loaded master data for material and vendor.
I dragged the char and the relevant attributes in the query designer and executed the query. But in the output the attributes values are not displayed.
What could the reason ?
Regards,
V N.

Hi all,
Thanks for the reply.
"Display attributes will also get displayed if you include the infoobject for which they are attributes."
Suppose for 0vendor the attr is 0sortl. By defualt it is display attr. I dragged in the query the 0vendor and its attr 0sortl and executed. It didnot displayed any values for this 0sortl
I changed it to Nav Attr. And rerun the query, it is displaying values.
In the first case i included Display attr and the infoobject for which it is attr in the query. Please explain me why it didnot displayed the values.
And after changing it to Nav attr it displayed the values.
Please explain me what happened actually.
Regards,
V N.

Change from display attribute to compounding attribute

Similar Messages

Maybe you are looking for