Change from Dynamic m,ember to Store members using a rule

Hi there,For adding a dynamic member using a rules files i'm using the X property but what is the property to set uip a store member ??? I've been searching some manuals but i didn't found it.thanksd in advanvebest regards Rubianes

Hi - There is no code for Storing Members. That is assumed as the default.

Similar Messages

  • How can I change from paying with a credit card to using prepaid for itunes

    How can I change from paying with a credit card to using prepaid for itunes on ipad 2 .alrwady have app ID

    iTunes Store: Changing Account Information
    http://support.apple.com/kb/HT1918
    Apple ID Support - Manage Account
    http://www.apple.com/support/appleid/manage/
     Cheers, Tom

  • Whenever I change from My Music to iTunes Store and then back to My Music, it sends me to the top of My Music instead of where I was when i switched.  How can I get it to return to where I was when I switch out of and back into My Music?

    Whenever I switch from My Music to iTunes Store and then back to My Music, it sends me to the top of My Music instead of where I was when I switched.  How can I get it to return to where I was when I switch out of and back into My Music instead of going back to the top?

    Firefox will reload a page and reposition at the top if the copy in the cache has expired. However, that shouldn't happen right away.
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • File name cant be fetched from Dynamic configuration...mutli-mapping used

    In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
    the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
    the code is all correct....and it looks like
    DynamicConfiguration conf = (DynamicConfiguration)
    container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String sourceFileName = conf.get(key);
    if (sourceFileName == null ){
    sourceFileName = "ErrorFile.xml";}
    return sourceFileName;

    Hi,
    Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
    It will throw Exception..
    The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
    If u r doing for file to file means no UDF required,, just check ASMA on both sides....
    Babu

  • Sorting members using Load Rule Parent Child Method

    Hi all,
    I have a Product Dimension with around 7 gen's and wanted to sort Gen 3 members under parent (say CommProduct). All these members are initially loaded using Studio and i am trying sort Gen 3 members using a text file / Load Rule (Parent Child Method). I have "Allow Moves" ,"Allow Property Changes" and member sorting: None checked for the load rule. I tried updating the outline using the load rule, however the outline remains unchanged and members sorted by alphabets.
    Essbase Version: 11.1.2.3
    Current Hierarchy:
    Product 
               CommProduct
                                     A
                                     B
                                     C
                                     D
                                     E
    Hierarchy Wanted:
    Product 
               CommProduct
                                     A
                                     C
                                     E
                                     B
                                     D
    Dim Build Text File:
    Parent,Child,Aggregation
    CommProduct,A,+
    CommProduct,C,+
    CommProduct,E,+
    CommProduct,B,~
    CommProduct,D,+
    Any help would be highly appreciated.
    Thanks

    Can't you create a column where you can specify the desired order and build accordingly. I don't think you can achieve that using a load rule. Allow moves works only if the members are under a different parent. In your case it is the same parent.
    Regards
    Celvin
    http://www.orahyplabs.com

  • VM NIC keeps changing from Dynamic to Static IP (from a static IP pool)

    Back ground:
    Having migrated our VM's from 2008R2 and 2012SP1 servers into one 4 node 2012R2 Hyper V Cluster we have a problem with NIC's being changed to Static IP, this in turn gives a range of warning and errors when
    moving VM's between the nodes (example during a live migrate or when we put a node in maintenance mode). 
    The cluster share a Logical Switch, this switch has 1 Uplink. The uplink is a Port Profile called "TrunkPort" and it contains lots of network sites. Each network site links to a Logical Network, each Logical Network is basically a VLAN on our Cisco
    router/switch.
    We don't have any IP Pools configured since we assign all VM's a static IP manually or they use DHCP provided by our AD servers.
    When we change a NIC to from Static IP to Dynamic (there might be power shell to do this), bit in the GUI its painfull as you have to shutdown the VM remove the adapter and create a new one. I does not last long as the system after a few minutes changes
    the NIC configuration back to Static IP again. Any idea why and how to stop it?
    example of errors after a migration that completed w/ Info :
    Error (23801)
    No available connection to selected VM Network can be found.
    Recommended Action
    Ensure host NICs have connection to the fabric network on which VM Network is created.
    Error (23810)
    There is no host NIC with required classification.
    Recommended Action
    Ensure that there NICs with required classification on a host.
    Error (23806)
    All available ports on switch extension  has been used.
    Recommended Action
    Ensure there are free ports available on a switch extension.
    Error (23808)
    All available ports on port profile  has been used.
    Recommended Action
    Ensure that there are free ports available on a port profile.
    Error (23807)
    The switch extension  has reached maximum supported ports on this host.
    Recommended Action
    Ensure there are free ports available on a switch extension per host.
    Error (23809)
    The port profile  has reached maximum supported ports on this host.
    Recommended Action
    Ensure that there are free ports available on a port profile per host.
    Error (23825)
    The virtual machine requires a logical switch connection and the host network adapter is not attached to a logical switch or operating system doesn't support logical switch.
    Recommended Action
    Ensure operating system supports logical switch and there is a logical switch connection for the host or remove the network interface card from the virtual machine and try the operation again.
    Error (23753)
    The virtual machine or tier load balancer configuration requires an IP pool and there are no appropriate IP pools accessible from the host.
    Recommended Action
    Select a host with access to an appropriate IP pool and try the operation again.
    Warning (23830)
    Unable to find compliant logical switch.
    Recommended Action
    Fix logical switch compliance state.
    Note: a server configured with Dynamic NIC will move between nodes without any errors (nice green tick box icon), our problem is that SCVMM or the servers deside to reconfigure the NIC's to Static IP when ever they see fit!!

    I feel like some issue with the Fabric configuration.
    If you are create a new VM through SCVMM, do you face this issue? (While creating the new VM, on the hardware configuration page, use dynamic IP and Dynamic MAC)
    The first event which you listed says about missing VM Network.
    No available connection to selected VM Network can be found.
    Please check the VM Network to where the VM is connected through SCVMM. And check if all the nodes have the same VM Network.
    If thats missing, fixing it might fix few other errors which you mentioned.
    Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
    InsideVirtualization.com

  • TS1702 how to change from usa to uk app store on ipad

    can anyone help change settings for app store from usa back to uk PLEASE.......

    Go to App store - Scroll to the bottom and tap on your Apple ID Name then it says View Apple ID Tap that and change your country there

  • After changing from my 3S to a 5, I use much more data than before why?

    My Iphone5 uses an accessive amount of data, a lot more than my 3S and I am on the internet the same amount to time.. any clues of why?

    Your 5 has more than your 3S.
    BTW, Nobody here can know how your iPhone is configured, so you need to supply more info for a better answer.
    Read here:
    http://support.apple.com/kb/HT4146

  • When I change from MobileMe to iCloud can I still use my iPod Touch G2 for emails?

    Can I still sync everything as per normal? Is it just the new iCloud features that wont work?

    You can't use your iPod with any of iClouds features. You need iOS5 and the iDevice wont run that nor will you be able to move your MobileMe account to iCloud on iOS4.x.
    In order to keep your MM account working after next year you must purchase a new idevice or a Lion capable Mac. Alternate : a Vista/Win7 PC with Outlook will also work with iCloud.

  • Mileage rate change from .40p to .45p from Apr 6 2011

    Hi
    The mileage rate had changed from .40p to .45p from April 6th 2011.
    Currently we are in version 11.5.10.2.
    How could we change these settings in Iexpenses?
    As the mileage claimed between 1st Apr till 5th Apr should be charged .40p whereas from 6th April it should be .45p.
    Options we tried to implement these
    1) Overtype the mileage rate from .40p to .45p
    Overtyping the mileage rate for the current period allows users to claim at the rate of .45p even when they raise the claims during 1st Apr till 5th April. It should not be allowed, how could we restrict that and allow them to claim .45p only from 6th April?
    2) End-dating the current period with .40p and creating a new period with .45p
    This works fine, but the problem is calculating the cummulative mileage. How could we consolidate the mileage claimed by a user for two different periods in to one and how the application will change the rate if mileage crosses the limit( 10,000)?
    Please let us know how could we implement this?
    Thanks
    Santhosh

    Hi
    Since the mileage rates got changed from 6th April 2011, we need to use the new rate(.45p) if the users raise a claim after 6th April and if they raise the claim before 6th April then we need to use the old rate (.40p). How is this possible?
    We tried creating a new period from 6th April with the new rate and end-dated the old period till 5th April it works fine for this method. But the problem here with the solution is while calculating cummulative mileage for the employees (as the application does not consolidate the mileage claimed by employees during two different period (1st April till 5th April 2011 & 6th April till 31-Mar-2012).
    Also we tried over-typing the mileage rate from .40p to .45p for the existing period but again the issue here is when users raise claims for the date between 1st april till 5th april they will be charged with .45p instead of .40p. (its overpaying for the employees). How this can be avoided?
    Regards
    Santhosh

  • I need to change from Japan App Store to Australia App Store. I get this every time I try using My MacID: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." What next TY. JohnCahill

    I moved from Japan to Australia. I need to change from Japan App Store to the Australian App Store. I get the following message every time I try using My MacID which was set up in Japan: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." At one point... by which path I do not remember... I was instructed to created a new ID. I fill out the new ID forms, but the address is rejected each time... quite confusing. Does it want a new name? But it says I cannot use an apple domain (tag?) even though I guess it has to be an apple address... ? So I have iTunes crdit cards purchansed in Australia, can't spend in AUstralian iTunes Store, get directed back to Japan each time, and can't open a new ID... What am I doing wrong? Thank you in advance.  John. Australia.

    You must have a separate Apple ID registered in the other store along with a valid bank-issued charge card in the other country, and a legal billing address in the other country.
    Sorry... But... You cannot use other countries itunes stores.
    You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
    iTunes Store Terms of Service
    http://www.apple.com/legal/itunes/us/terms.html#SERVICE

  • I can't update my apps, was asked to change from US store to Lebanese store. How to do that?

    I can't update my apps, was asked to change from US store to Lebanese store. How to do that?

    Follow this procedure:
    1. Go to Settings > iTunes & App Stores > Apple ID.
    2. Tap your Apple ID.
    3. Tap View Apple ID.
    4. Enter your password.
    5. Go to Country/Region in the popup window to change to the desired store.
    See also: http://support.apple.com/kb/HT1311

  • I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar.Please help

    I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar and I do no longer have an american visa card, only Norwegian. Is there any way I can erase the credit on my account so I can change the appstore country? Or osmething I can use this credit on? Thank you very much

    Try contacting the store support staff at: http://www.apple.com/emea/support/itunes/contact.html they are usually pretty good at sorting out these issues.

  • I changed my email on my Apple ID and now I can't purchase anything from iTunes or the app store. How do I fix that?

    I changed the email on my Apple ID and now my password won't work and I can't get anything from iTunes or the App store.

    Try logging out of your account on the iPad by tapping on your id in Settings > Store (Settings > iTunes  & App Stores on iOS 6) and then log back in and see if it then works.

  • I have moved from the UK to the USA and have a new phone, I try to change my country location on the store and get an error message saying I have to cancel my itunes match and have a pass incomplete, any ideas?

    I have moved from the UK to the USA and have a new phone, I try to change my country location on the store and get an error message saying I have to cancel my itunes match and also that I have a pass incomplete, any ideas how to fix and change the store. It is becoming a problem with getting some USA aps and content
    Thank you
    Tom

    iTunes match is a subscription that you have in when you were still in the UK. According to the terms & conditions you'll need to wait for the susbcription to end before you can change your country to iTunes Store USA.

Maybe you are looking for