Change from edge firewall to single network adapter.
Can I change from Edge Firewall to SIngle Adapter mode? If possible, what do I need to take on consideration for doing it.
Thanks for advise
You can change the template by running the Getting Started Wizard (GSW). Do note that your configuration will be lost, you will have to export your configuration and then restore it piece by piece, e.g. you can't import the entire configuration
but rather objects (e.g. rules, network objects etc). Then you'd have to verify the imported configuration and if necessary modify it to a working state.
If the configuration isn't to complicated, I'd start over manually. If you go for the export/import I strongly recommend that you test this on a test system first to verify your procedure.
But yes, its doable.
Hth, Anders Janson Enfo Zipper
Similar Messages
-
Multiple networks using single network adapter
Hi,
If I have only single network adapter in a OVM server (or single bond interface bond0 created from two network adapters), is it possible to separate networks for
VM management, live migrate and VM public networks using any mechanism, say by creating VLANs? I am having two 10G adapters in each of the VM server
and would like to separate traffic of each of these networks. Thanks in advance.Hi,
10G adapter is the best NIC performance so with two NICs like this, i recommand you to use the bond0 (mode 1) for fault tolerance and use the VLAN technology to separate the Networks.
Note that Oracle VM support the VLAN configuration.
I hope this can help you
Best Regards -
How to change LACPDU timer setting on Microsoft Network Adapter Multiplexor Driver
We’re installing our first Windows 2012 R2 server, and one of the network settings is different from what’s on a comparable Windows 2008 R2 server, and it's not what our network group would like to see connected to their switches. Both servers have
2 NICs teamed using the LACP protocol and are connected to 2 different switches for high availability. In both cases I just teamed the NICs with whatever driver was on the server.
On the 2008 R2 server (the one our network group likes), it’s an Intel driver, “Intel(R) Advanced Network Services Virtual Adapter”. On the 2012 R2 server it’s a Microsoft driver, “Microsoft Network Adapter Multiplexor Driver”. The setting that
our network group is concerned about is the LACPDU timer setting. Apparently it can be either “fast” or “slow”. What they see on the switches is that on the 2008 Intel driver NICs the setting is “slow” and on the 2012 Microsoft driver NICs the
setting is “fast”. The switches are expecting “slow”.
I spent some time searching on Microsoft.com and other places, as well as poking around on the server, but I couldn’t find that setting or how to change it on the Microsoft Network Adapter Multiplexor Driver. Does anyone know how I can change it?
Thanks!Hi,
According to my knowledge, we can’t change the value of LACP timer.
Here is a related question,
How to change LACP timer-value on Windows server 2012 Network Teaming, from short to long?
http://social.technet.microsoft.com/Forums/en-US/05e2761f-e165-44f6-9bed-d91e9eeba687/how-to-change-lacp-timervalue-on-on-windows-server-2012-network-teaming-from-short-to-long
Hope this helps.
Steven Lee
TechNet Community Support -
Changing from Dual Core to Single core
If you ever need to change from dual to single core you just have to call Apple Technical Support to learn how to do it. Some third party software vendors software dos not support multi-threading. So it sometimes causes a kernel panic which unexpectedly quits the program.
ComputerGenius,
the easiest way: download and install the developer tools. These contain a preference pain called "Processors". With that one you can deactivate processors/cores individually. -
How to change from creative cloud to single-app?
I'm currently on the annual creative cloud membership. I'd like to change to a single-app membership, since I only need Photoshop right now. How do I do that? Do I have to cancel the current plan and then sign up for the single-app plan, or is there an easier way?
As mentioned by you, you need to cancel the present CC & purchase the single app. The cancellation fee can be waived off for such instances.
Regards
Rajshree -
Like the topic says, have an macbook pro 15 late 2008 works like a charm.
Have had a bad battery for over a year so today i bought a new one, plugged it in
and started my mac, said charging and stood on 0% for about 10 mins then the adapter
turned green and the battery didnt show up on my mac anymore, tried and SMC or whats
it called, same thing happened again
downloaded cocnut battery and there it just said when i was charging that the
battery was -1 amh?
isnt new battery supposed to be delieverd with 50% on them?
What can be the problem here? is it the AC adapter?
helpful for anytips, a very poor student so cant have it on a serviceHi iphone_warrior,
thanks for the reply and for your support. However, I did not understand why I as customer should go to the next Apple store nor why I should pay 29,- Euros for the replacement.
I give you an example. I have an HP printer. Was not working any more after 2 month. HP send me a new printer and took back the old without any charge.
Apple knows that it is a problem with the phone battery. Why the customer should pay for that. The customer has warranty, the customer paid the product. Apple has to care about the customer. It seems that Apple cares more about to increase its profit and leave the support its customers. Anyhow, if this the only way I have to invest the time and will go for the Apple store. I hope the buggy phone will be replaced by one which is working properly. Otherwise I will go for the offer from Samsung which won't be a good advertisement for Apple at all.
Best regards, Harun99
I wonder why this threat has been taken from the discussion forum. Is that the way Apple is working with the feedback from its customers. Very dissapointing. -
Change from Family Plan to Single Plan
I have a family plan with 2 lines. Mine is the primary line, but we have about a year and a half left on our contract. I need to change my plan so that I do not have the family plan anymore, and just keep my own line. My question is, will I be charged extra fees to drop a line, will my bill go down or stay the same, and will I lose my unlimited data?
Both lines started a new contract about 6 months ago? (that's how I read we have about a year and a half left on our contract) Is there someone who is to take over the second line? If you got two discounted phones 6 months ago, then both lines are under contract. There will be an ETF on the line you cancel - $350 less ~$60 if it is a smartphone, $175 less ~$30 if it is a basic phone that was purchased initially.
I don't know what your plan is now, or what you might change it to, so I have no idea if the bill will go up or down. You said you have unlimited data now, so you must have had the plan prior to this recent upgrade.... however, if you change plans (and dropping a line and switching to an individual plan will be a plan change) then it's likely the unlimited data will not carry over to the new plan.
Each line has it's own contract and upgrade eligibility. Call #UPG on each phone to see when each line is eligible for an upgrade and when the contract ends for that line (or log on to MyVerizon as the account owner and view the information for each line there)
Post back if you have further questions - you really didn't provide enough information to give you a more definite answer. -
Change from Continuous View to Single page for presentation in Ipad.
I am a Windows/Android user. I could not find anything to accomplish this or anything else for that matter. No view menu...
If you have the current version of Reader for the iPad (11.2.3), open your PDF.
Click on the upper part of the page so you can see the menus above. Click on the icon that looks like an eye. Then you can choose View Modes: Continuous or Single Page, and an option for Night Mode. -
Network problems are preventing connection to Exchange when changing from Ethernet to Wifi
I have a user that connects to Exchange fine while their computer is docked and connected to the LAN by Ethernet, but once they undock they receive the error "Cannot open item. Network problems are preventing connection to Exchange server." They
are connected to the internal company Wi-Fi and nothing changes about their computer's status other than changing from being on the wired network to wireless.Hi,
What's your Outlook version and Exchange version? Outlook 2007 or Outlook 2010/2013? Please check your Wifi settings and make sure your Wifi password is correct.
In Outlook, please click File > Account Settings > Security and
make sure the Encrypt data between Microsoft
Outlook and Microsoft Exchange is checked.
Regards,
Winnie Liang
TechNet Community Support -
Can I change my iPad 3 from AT&T to Verizon network?
Can I get my iPad 3 changes from AT&T to Verizon network enabled?
Thanks. Sounds simple enough. Can that be done at an Apple store? If not, where do you go to get new SIM for Verizon 3G?
-
Wireless adapter name is changing from wlp0s26u1u1 to wlan0
If I reboot my computer from an on state the name changes from wlp0s26u1u1 to wlan0 which makes me unable to connect to wifi, even if I make a netctl profile for wlan0, it fails.
If I start my computer from an off state, the adapter takes the name wlp0s26u1u1 and everything works smoothly.
Why does this happen? Is it a bug? How can I fix it?
Thanks.Cold
-- Logs begin at Fri 2013-09-20 15:59:51 PDT, end at Sun 2014-03-09 06:40:40 PDT. --
Mar 09 06:33:04 ---- systemd-journal[136]: Runtime journal is using 8.0M (max allowed 598.7M, trying to leave 898.1M free of 5.8G available → current limit 598.7M).
Mar 09 06:33:04 ---- systemd-journal[136]: Runtime journal is using 8.0M (max allowed 598.7M, trying to leave 898.1M free of 5.8G available → current limit 598.7M).
Mar 09 06:33:04 ---- kernel: Initializing cgroup subsys cpuset
Mar 09 06:33:04 ---- kernel: Initializing cgroup subsys cpu
Mar 09 06:33:04 ---- kernel: Initializing cgroup subsys cpuacct
Mar 09 06:33:04 ---- kernel: Linux version 3.13.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014
Mar 09 06:33:04 ---- kernel: Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw nomodeset initrd=../initramfs-linux.img
Mar 09 06:33:04 ---- kernel: e820: BIOS-provided physical RAM map:
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000dd74efff] usable
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000dd74f000-0x00000000de052fff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000de053000-0x00000000de0dffff] usable
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000de0e0000-0x00000000de17dfff] ACPI NVS
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000de17e000-0x00000000de979fff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000de97a000-0x00000000de97afff] usable
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000de97b000-0x00000000de9bdfff] ACPI NVS
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000de9be000-0x00000000df3f6fff] usable
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000df3f7000-0x00000000df7f1fff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000df7f2000-0x00000000df7fffff] usable
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Mar 09 06:33:04 ---- kernel: BIOS-e820: [mem 0x0000000100000000-0x000000031effffff] usable
Mar 09 06:33:04 ---- kernel: NX (Execute Disable) protection: active
Mar 09 06:33:04 ---- kernel: SMBIOS 2.7 present.
Mar 09 06:33:04 ---- kernel: DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Extreme4, BIOS P2.70 11/28/2012
Mar 09 06:33:04 ---- kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Mar 09 06:33:04 ---- kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Mar 09 06:33:04 ---- kernel: No AGP bridge found
Mar 09 06:33:04 ---- kernel: e820: last_pfn = 0x31f000 max_arch_pfn = 0x400000000
Mar 09 06:33:04 ---- kernel: MTRR default type: uncachable
Mar 09 06:33:04 ---- kernel: MTRR fixed ranges enabled:
Mar 09 06:33:04 ---- kernel: 00000-9FFFF write-back
Mar 09 06:33:04 ---- kernel: A0000-BFFFF uncachable
Mar 09 06:33:04 ---- kernel: C0000-CFFFF write-protect
Mar 09 06:33:04 ---- kernel: D0000-E7FFF uncachable
Mar 09 06:33:04 ---- kernel: E8000-FFFFF write-protect
Mar 09 06:33:04 ---- kernel: MTRR variable ranges enabled:
Mar 09 06:33:04 ---- kernel: 0 base 000000000 mask E00000000 write-back
Mar 09 06:33:04 ---- kernel: 1 base 200000000 mask F00000000 write-back
Mar 09 06:33:04 ---- kernel: 2 base 300000000 mask FF0000000 write-back
Mar 09 06:33:04 ---- kernel: 3 base 310000000 mask FF8000000 write-back
Mar 09 06:33:04 ---- kernel: 4 base 318000000 mask FFC000000 write-back
Mar 09 06:33:04 ---- kernel: 5 base 31C000000 mask FFE000000 write-back
Mar 09 06:33:04 ---- kernel: 6 base 31E000000 mask FFF000000 write-back
Mar 09 06:33:04 ---- kernel: 7 base 0E0000000 mask FE0000000 uncachable
Mar 09 06:33:04 ---- kernel: 8 disabled
Mar 09 06:33:04 ---- kernel: 9 disabled
Mar 09 06:33:04 ---- kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mar 09 06:33:04 ---- kernel: e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
Mar 09 06:33:04 ---- kernel: e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
Mar 09 06:33:04 ---- kernel: found SMP MP-table at [mem 0x000fd8d0-0x000fd8df] mapped at [ffff8800000fd8d0]
Mar 09 06:33:04 ---- kernel: Scanning 1 areas for low memory corruption
Mar 09 06:33:04 ---- kernel: Base memory trampoline at [ffff880000097000] 97000 size 24576
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Mar 09 06:33:04 ---- kernel: [mem 0x00000000-0x000fffff] page 4k
Mar 09 06:33:04 ---- kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
Mar 09 06:33:04 ---- kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
Mar 09 06:33:04 ---- kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0x31ee00000-0x31effffff]
Mar 09 06:33:04 ---- kernel: [mem 0x31ee00000-0x31effffff] page 2M
Mar 09 06:33:04 ---- kernel: BRK [0x01b42000, 0x01b42fff] PGTABLE
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0x31c000000-0x31edfffff]
Mar 09 06:33:04 ---- kernel: [mem 0x31c000000-0x31edfffff] page 2M
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0x300000000-0x31bffffff]
Mar 09 06:33:04 ---- kernel: [mem 0x300000000-0x31bffffff] page 2M
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0x00100000-0xdd74efff]
Mar 09 06:33:04 ---- kernel: [mem 0x00100000-0x001fffff] page 4k
Mar 09 06:33:04 ---- kernel: [mem 0x00200000-0xdd5fffff] page 2M
Mar 09 06:33:04 ---- kernel: [mem 0xdd600000-0xdd74efff] page 4k
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0xde053000-0xde0dffff]
Mar 09 06:33:04 ---- kernel: [mem 0xde053000-0xde0dffff] page 4k
Mar 09 06:33:04 ---- kernel: BRK [0x01b43000, 0x01b43fff] PGTABLE
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0xde97a000-0xde97afff]
Mar 09 06:33:04 ---- kernel: [mem 0xde97a000-0xde97afff] page 4k
Mar 09 06:33:04 ---- kernel: BRK [0x01b44000, 0x01b44fff] PGTABLE
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0xde9be000-0xdf3f6fff]
Mar 09 06:33:04 ---- kernel: [mem 0xde9be000-0xde9fffff] page 4k
Mar 09 06:33:04 ---- kernel: [mem 0xdea00000-0xdf1fffff] page 2M
Mar 09 06:33:04 ---- kernel: [mem 0xdf200000-0xdf3f6fff] page 4k
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0xdf7f2000-0xdf7fffff]
Mar 09 06:33:04 ---- kernel: [mem 0xdf7f2000-0xdf7fffff] page 4k
Mar 09 06:33:04 ---- kernel: init_memory_mapping: [mem 0x100000000-0x2ffffffff]
Mar 09 06:33:04 ---- kernel: [mem 0x100000000-0x2ffffffff] page 2M
Mar 09 06:33:04 ---- kernel: RAMDISK: [mem 0x7fcfd000-0x7fffffff]
Mar 09 06:33:04 ---- kernel: ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
Mar 09 06:33:04 ---- kernel: ACPI: XSDT 00000000de16f078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
Mar 09 06:33:04 ---- kernel: ACPI: FACP 00000000de178f58 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
Mar 09 06:33:04 ---- kernel: ACPI: DSDT 00000000de16f178 009DDD (v02 ALASKA A M I 00000022 INTL 20051117)
Mar 09 06:33:04 ---- kernel: ACPI: FACS 00000000de17c080 000040
Mar 09 06:33:04 ---- kernel: ACPI: APIC 00000000de179068 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
Mar 09 06:33:04 ---- kernel: ACPI: FPDT 00000000de1790e0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
Mar 09 06:33:04 ---- kernel: ACPI: MCFG 00000000de179128 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
Mar 09 06:33:04 ---- kernel: ACPI: AAFT 00000000de179168 000112 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
Mar 09 06:33:04 ---- kernel: ACPI: HPET 00000000de179280 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
Mar 09 06:33:04 ---- kernel: ACPI: SSDT 00000000de1792b8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
Mar 09 06:33:04 ---- kernel: ACPI: SSDT 00000000de179628 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
Mar 09 06:33:04 ---- kernel: ACPI: BGRT 00000000de17a0c0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
Mar 09 06:33:04 ---- kernel: ACPI: Local APIC address 0xfee00000
Mar 09 06:33:04 ---- kernel: No NUMA configuration found
Mar 09 06:33:04 ---- kernel: Faking a node at [mem 0x0000000000000000-0x000000031effffff]
Mar 09 06:33:04 ---- kernel: Initmem setup node 0 [mem 0x00000000-0x31effffff]
Mar 09 06:33:04 ---- kernel: NODE_DATA [mem 0x31efed000-0x31eff1fff]
Mar 09 06:33:04 ---- kernel: [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880312600000-ffff88031e5fffff] on node 0
Mar 09 06:33:04 ---- kernel: Zone ranges:
Mar 09 06:33:04 ---- kernel: DMA [mem 0x00001000-0x00ffffff]
Mar 09 06:33:04 ---- kernel: DMA32 [mem 0x01000000-0xffffffff]
Mar 09 06:33:04 ---- kernel: Normal [mem 0x100000000-0x31effffff]
Mar 09 06:33:04 ---- kernel: Movable zone start for each node
Mar 09 06:33:04 ---- kernel: Early memory node ranges
Mar 09 06:33:04 ---- kernel: node 0: [mem 0x00001000-0x0009cfff]
Mar 09 06:33:04 ---- kernel: node 0: [mem 0x00100000-0xdd74efff]
Mar 09 06:33:04 ---- kernel: node 0: [mem 0xde053000-0xde0dffff]
Mar 09 06:33:04 ---- kernel: node 0: [mem 0xde97a000-0xde97afff]
Mar 09 06:33:04 ---- kernel: node 0: [mem 0xde9be000-0xdf3f6fff]
Mar 09 06:33:04 ---- kernel: node 0: [mem 0xdf7f2000-0xdf7fffff]
Mar 09 06:33:04 ---- kernel: node 0: [mem 0x100000000-0x31effffff]
Mar 09 06:33:04 ---- kernel: On node 0 totalpages: 3133888
Mar 09 06:33:04 ---- kernel: DMA zone: 64 pages used for memmap
Mar 09 06:33:04 ---- kernel: DMA zone: 21 pages reserved
Mar 09 06:33:04 ---- kernel: DMA zone: 3996 pages, LIFO batch:0
Mar 09 06:33:04 ---- kernel: DMA32 zone: 14153 pages used for memmap
Mar 09 06:33:04 ---- kernel: DMA32 zone: 905764 pages, LIFO batch:31
Mar 09 06:33:04 ---- kernel: Normal zone: 34752 pages used for memmap
Mar 09 06:33:04 ---- kernel: Normal zone: 2224128 pages, LIFO batch:31
Mar 09 06:33:04 ---- kernel: ACPI: PM-Timer IO Port: 0x408
Mar 09 06:33:04 ---- kernel: ACPI: Local APIC address 0xfee00000
Mar 09 06:33:04 ---- kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar 09 06:33:04 ---- kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Mar 09 06:33:04 ---- kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
Mar 09 06:33:04 ---- kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Mar 09 06:33:04 ---- kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Mar 09 06:33:04 ---- kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar 09 06:33:04 ---- kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mar 09 06:33:04 ---- kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 09 06:33:04 ---- kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 09 06:33:04 ---- kernel: ACPI: IRQ0 used by override.
Mar 09 06:33:04 ---- kernel: ACPI: IRQ2 used by override.
Mar 09 06:33:04 ---- kernel: ACPI: IRQ9 used by override.
Mar 09 06:33:04 ---- kernel: Using ACPI (MADT) for SMP configuration information
Mar 09 06:33:04 ---- kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
Mar 09 06:33:04 ---- kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Mar 09 06:33:04 ---- kernel: nr_irqs_gsi: 40
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xdd74f000-0xde052fff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xde0e0000-0xde17dfff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xde17e000-0xde979fff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xde97b000-0xde9bdfff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xdf3f7000-0xdf7f1fff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
Mar 09 06:33:04 ---- kernel: PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
Mar 09 06:33:04 ---- kernel: e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Mar 09 06:33:04 ---- kernel: Booting paravirtualized kernel on bare hardware
Mar 09 06:33:04 ---- kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
Mar 09 06:33:04 ---- kernel: PERCPU: Embedded 29 pages/cpu @ffff88031ec00000 s86336 r8192 d24256 u524288
Mar 09 06:33:04 ---- kernel: pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
Mar 09 06:33:04 ---- kernel: pcpu-alloc: [0] 0 1 2 3
Mar 09 06:33:04 ---- kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3084898
Mar 09 06:33:04 ---- kernel: Policy zone: Normal
Mar 09 06:33:04 ---- kernel: Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw nomodeset initrd=../initramfs-linux.img
Mar 09 06:33:04 ---- kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Mar 09 06:33:04 ---- kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
Mar 09 06:33:04 ---- kernel: Checking aperture...
Mar 09 06:33:04 ---- kernel: No AGP bridge found
Mar 09 06:33:04 ---- kernel: Calgary: detecting Calgary via BIOS EBDA area
Mar 09 06:33:04 ---- kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Mar 09 06:33:04 ---- kernel: Memory: 12257392K/12535552K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 278160K reserved)
Mar 09 06:33:04 ---- kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Mar 09 06:33:04 ---- kernel: Preemptible hierarchical RCU implementation.
Mar 09 06:33:04 ---- kernel: RCU dyntick-idle grace-period acceleration is enabled.
Mar 09 06:33:04 ---- kernel: Dump stacks of tasks blocking RCU-preempt GP.
Mar 09 06:33:04 ---- kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
Mar 09 06:33:04 ---- kernel: NR_IRQS:8448 nr_irqs:712 16
Mar 09 06:33:04 ---- kernel: Console: colour VGA+ 80x25
Mar 09 06:33:04 ---- kernel: console [tty0] enabled
Mar 09 06:33:04 ---- kernel: allocated 50331648 bytes of page_cgroup
Mar 09 06:33:04 ---- kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mar 09 06:33:04 ---- kernel: hpet clockevent registered
Mar 09 06:33:04 ---- kernel: tsc: Fast TSC calibration using PIT
Mar 09 06:33:04 ---- kernel: tsc: Detected 3399.681 MHz processor
Mar 09 06:33:04 ---- kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6802.66 BogoMIPS (lpj=11332270)
Mar 09 06:33:04 ---- kernel: pid_max: default: 32768 minimum: 301
Mar 09 06:33:04 ---- kernel: Security Framework initialized
Mar 09 06:33:04 ---- kernel: AppArmor: AppArmor disabled by boot time parameter
Mar 09 06:33:04 ---- kernel: Yama: becoming mindful.
Mar 09 06:33:04 ---- kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mar 09 06:33:04 ---- kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mar 09 06:33:04 ---- kernel: Mount-cache hash table entries: 256
Mar 09 06:33:04 ---- kernel: Initializing cgroup subsys memory
Mar 09 06:33:04 ---- kernel: Initializing cgroup subsys devices
Mar 09 06:33:04 ---- kernel: Initializing cgroup subsys freezer
Mar 09 06:33:04 ---- kernel: Initializing cgroup subsys net_cls
Mar 09 06:33:04 ---- kernel: Initializing cgroup subsys blkio
Mar 09 06:33:04 ---- kernel: CPU: Physical Processor ID: 0
Mar 09 06:33:04 ---- kernel: CPU: Processor Core ID: 0
Mar 09 06:33:04 ---- kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Mar 09 06:33:04 ---- kernel: mce: CPU supports 9 MCE banks
Mar 09 06:33:04 ---- kernel: CPU0: Thermal monitoring enabled (TM1)
Mar 09 06:33:04 ---- kernel: Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
Mar 09 06:33:04 ---- kernel: Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
Mar 09 06:33:04 ---- kernel: ACPI: Core revision 20131115
Mar 09 06:33:04 ---- kernel: ACPI: All ACPI Tables successfully acquired
Mar 09 06:33:04 ---- kernel: ftrace: allocating 21060 entries in 83 pages
Mar 09 06:33:04 ---- kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 09 06:33:04 ---- kernel: smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
Mar 09 06:33:04 ---- kernel: TSC deadline timer enabled
Mar 09 06:33:04 ---- kernel: Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
Mar 09 06:33:04 ---- kernel: ... version: 3
Mar 09 06:33:04 ---- kernel: ... bit width: 48
Mar 09 06:33:04 ---- kernel: ... generic registers: 8
Mar 09 06:33:04 ---- kernel: ... value mask: 0000ffffffffffff
Mar 09 06:33:04 ---- kernel: ... max period: 0000ffffffffffff
Mar 09 06:33:04 ---- kernel: ... fixed-purpose events: 3
Mar 09 06:33:04 ---- kernel: ... event mask: 00000007000000ff
Mar 09 06:33:04 ---- kernel: x86: Booting SMP configuration:
Mar 09 06:33:04 ---- kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Mar 09 06:33:04 ---- kernel: .... node #0, CPUs: #1 #2 #3
Mar 09 06:33:04 ---- kernel: x86: Booted up 1 node, 4 CPUs
Mar 09 06:33:04 ---- kernel: smpboot: Total of 4 processors activated (27208.67 BogoMIPS)
Mar 09 06:33:04 ---- kernel: devtmpfs: initialized
Mar 09 06:33:04 ---- kernel: PM: Registering ACPI NVS region [mem 0xde0e0000-0xde17dfff] (647168 bytes)
Mar 09 06:33:04 ---- kernel: PM: Registering ACPI NVS region [mem 0xde97b000-0xde9bdfff] (274432 bytes)
Mar 09 06:33:04 ---- kernel: RTC time: 13:33:02, date: 03/09/14
Mar 09 06:33:04 ---- kernel: NET: Registered protocol family 16
Mar 09 06:33:04 ---- kernel: cpuidle: using governor ladder
Mar 09 06:33:04 ---- kernel: cpuidle: using governor menu
Mar 09 06:33:04 ---- kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Mar 09 06:33:04 ---- kernel: ACPI: bus type PCI registered
Mar 09 06:33:04 ---- kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mar 09 06:33:04 ---- kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Mar 09 06:33:04 ---- kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Mar 09 06:33:04 ---- kernel: PCI: Using configuration type 1 for base access
Mar 09 06:33:04 ---- kernel: bio: create slab <bio-0> at 0
Mar 09 06:33:04 ---- kernel: ACPI: Added _OSI(Module Device)
Mar 09 06:33:04 ---- kernel: ACPI: Added _OSI(Processor Device)
Mar 09 06:33:04 ---- kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Mar 09 06:33:04 ---- kernel: ACPI: Added _OSI(Processor Aggregator Device)
Mar 09 06:33:04 ---- kernel: ACPI: Executed 1 blocks of module-level executable AML code
Mar 09 06:33:04 ---- kernel: ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
Mar 09 06:33:04 ---- kernel: ACPI Error: Method parse/execution failed [\_PR_.CPU0._PDC] (Node ffff88030d496280), AE_NOT_FOUND (20131115/psparse-536)
Mar 09 06:33:04 ---- kernel: ACPI: SSDT 00000000de002c18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
Mar 09 06:33:04 ---- kernel: ACPI: Dynamic OEM Table Load:
Mar 09 06:33:04 ---- kernel: ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
Mar 09 06:33:04 ---- kernel: ACPI: Interpreter enabled
Mar 09 06:33:04 ---- kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
Mar 09 06:33:04 ---- kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
Mar 09 06:33:04 ---- kernel: ACPI: (supports S0 S3 S4 S5)
Mar 09 06:33:04 ---- kernel: ACPI: Using IOAPIC for interrupt routing
Mar 09 06:33:04 ---- kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mar 09 06:33:04 ---- kernel: ACPI: No dock devices found.
Mar 09 06:33:04 ---- kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Mar 09 06:33:04 ---- kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Mar 09 06:33:04 ---- kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
Mar 09 06:33:04 ---- kernel: acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
Mar 09 06:33:04 ---- kernel: PCI host bridge to bus 0000:00
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [bus 00-3e]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
Mar 09 06:33:04 ---- kernel: pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
Mar 09 06:33:04 ---- kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:14.0: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
Mar 09 06:33:04 ---- kernel: pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
Mar 09 06:33:04 ---- kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
Mar 09 06:33:04 ---- kernel: pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
Mar 09 06:33:04 ---- kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.3: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.4: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.5: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.7: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
Mar 09 06:33:04 ---- kernel: pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.2: PME# supported from D3hot
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.0: [1002:6738] type 00 class 0x030000
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.0: reg 0x18: [mem 0xf7e20000-0xf7e3ffff 64bit]
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.0: reg 0x30: [mem 0xf7e00000-0xf7e1ffff pref]
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.0: supports D1 D2
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.1: reg 0x10: [mem 0xf7e40000-0xf7e43fff 64bit]
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.1: supports D1 D2
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Mar 09 06:33:04 ---- kernel: pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
Mar 09 06:33:04 ---- kernel: pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
Mar 09 06:33:04 ---- kernel: pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
Mar 09 06:33:04 ---- kernel: pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
Mar 09 06:33:04 ---- kernel: pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
Mar 09 06:33:04 ---- kernel: pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
Mar 09 06:33:04 ---- kernel: pci 0000:03:00.0: reg 0x24: [mem 0xf7d00000-0xf7d001ff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.3: PCI bridge to [bus 03]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
Mar 09 06:33:04 ---- kernel: pci 0000:04:00.0: [14e4:16b1] type 00 class 0x020000
Mar 09 06:33:04 ---- kernel: pci 0000:04:00.0: reg 0x10: [mem 0xf0010000-0xf001ffff 64bit pref]
Mar 09 06:33:04 ---- kernel: pci 0000:04:00.0: reg 0x18: [mem 0xf0000000-0xf000ffff 64bit pref]
Mar 09 06:33:04 ---- kernel: pci 0000:04:00.0: reg 0x30: [mem 0xf7c00000-0xf7c007ff pref]
Mar 09 06:33:04 ---- kernel: pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.4: PCI bridge to [bus 04]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
Mar 09 06:33:04 ---- kernel: pci 0000:05:00.0: [1b21:1080] type 01 class 0x060401
Mar 09 06:33:04 ---- kernel: pci 0000:05:00.0: System wakeup disabled by ACPI
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.5: PCI bridge to [bus 05-06]
Mar 09 06:33:04 ---- kernel: pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode)
Mar 09 06:33:04 ---- kernel: pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
Mar 09 06:33:04 ---- kernel: pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
Mar 09 06:33:04 ---- kernel: pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
Mar 09 06:33:04 ---- kernel: pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
Mar 09 06:33:04 ---- kernel: pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
Mar 09 06:33:04 ---- kernel: pci 0000:07:00.0: reg 0x10: [mem 0xf7b00000-0xf7b07fff 64bit]
Mar 09 06:33:04 ---- kernel: pci 0000:07:00.0: PME# supported from D3hot D3cold
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.7: PCI bridge to [bus 07]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff]
Mar 09 06:33:04 ---- kernel: acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
Mar 09 06:33:04 ---- kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Mar 09 06:33:04 ---- kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
Mar 09 06:33:04 ---- kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
Mar 09 06:33:04 ---- kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
Mar 09 06:33:04 ---- kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Mar 09 06:33:04 ---- kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Mar 09 06:33:04 ---- kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
Mar 09 06:33:04 ---- kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
Mar 09 06:33:04 ---- kernel: ACPI: Enabled 4 GPEs in block 00 to 3F
Mar 09 06:33:04 ---- kernel: ACPI: \_SB_.PCI0: notify handler is installed
Mar 09 06:33:04 ---- kernel: Found 1 acpi root devices
Mar 09 06:33:04 ---- kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Mar 09 06:33:04 ---- kernel: vgaarb: loaded
Mar 09 06:33:04 ---- kernel: vgaarb: bridge control possible 0000:01:00.0
Mar 09 06:33:04 ---- kernel: PCI: Using ACPI for IRQ routing
Mar 09 06:33:04 ---- kernel: PCI: pci_cache_line_size set to 64 bytes
Mar 09 06:33:04 ---- kernel: e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
Mar 09 06:33:04 ---- kernel: e820: reserve RAM buffer [mem 0xdd74f000-0xdfffffff]
Mar 09 06:33:04 ---- kernel: e820: reserve RAM buffer [mem 0xde0e0000-0xdfffffff]
Mar 09 06:33:04 ---- kernel: e820: reserve RAM buffer [mem 0xde97b000-0xdfffffff]
Mar 09 06:33:04 ---- kernel: e820: reserve RAM buffer [mem 0xdf3f7000-0xdfffffff]
Mar 09 06:33:04 ---- kernel: e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
Mar 09 06:33:04 ---- kernel: e820: reserve RAM buffer [mem 0x31f000000-0x31fffffff]
Mar 09 06:33:04 ---- kernel: NetLabel: Initializing
Mar 09 06:33:04 ---- kernel: NetLabel: domain hash size = 128
Mar 09 06:33:04 ---- kernel: NetLabel: protocols = UNLABELED CIPSOv4
Mar 09 06:33:04 ---- kernel: NetLabel: unlabeled traffic allowed by default
Mar 09 06:33:04 ---- kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Mar 09 06:33:04 ---- kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Mar 09 06:33:04 ---- kernel: Switched to clocksource hpet
Mar 09 06:33:04 ---- kernel: pnp: PnP ACPI init
Mar 09 06:33:04 ---- kernel: ACPI: bus type PNP registered
Mar 09 06:33:04 ---- kernel: system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Mar 09 06:33:04 ---- kernel: pnp 00:01: [dma 4]
Mar 09 06:33:04 ---- kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Mar 09 06:33:04 ---- kernel: pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
Mar 09 06:33:04 ---- kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
Mar 09 06:33:04 ---- kernel: system 00:04: [io 0x0680-0x069f] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:04: [io 0x1000-0x100f] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:04: [io 0xffff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:04: [io 0xffff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:04: [io 0x0400-0x0453] could not be reserved
Mar 09 06:33:04 ---- kernel: system 00:04: [io 0x0458-0x047f] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:04: [io 0x0500-0x057f] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:04: [io 0x164e-0x164f] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Mar 09 06:33:04 ---- kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
Mar 09 06:33:04 ---- kernel: system 00:06: [io 0x0454-0x0457] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Mar 09 06:33:04 ---- kernel: system 00:07: [io 0x0290-0x029f] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Mar 09 06:33:04 ---- kernel: system 00:08: [io 0x04d0-0x04d1] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Mar 09 06:33:04 ---- kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
Mar 09 06:33:04 ---- kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: [mem 0xf0100000-0xf0100fff] has been reserved
Mar 09 06:33:04 ---- kernel: system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
Mar 09 06:33:04 ---- kernel: pnp: PnP ACPI: found 12 devices
Mar 09 06:33:04 ---- kernel: ACPI: bus type PNP unregistered
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.3: PCI bridge to [bus 03]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.4: PCI bridge to [bus 04]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
Mar 09 06:33:04 ---- kernel: pci 0000:05:00.0: PCI bridge to [bus 06]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.5: PCI bridge to [bus 05-06]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.7: PCI bridge to [bus 07]
Mar 09 06:33:04 ---- kernel: pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
Mar 09 06:33:04 ---- kernel: pci_bus 0000:07: resource 1 [mem 0xf7b00000-0xf7bfffff]
Mar 09 06:33:04 ---- kernel: NET: Registered protocol family 2
Mar 09 06:33:04 ---- kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Mar 09 06:33:04 ---- kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Mar 09 06:33:04 ---- kernel: TCP: Hash tables configured (established 131072 bind 65536)
Mar 09 06:33:04 ---- kernel: TCP: reno registered
Mar 09 06:33:04 ---- kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes)
Mar 09 06:33:04 ---- kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
Mar 09 06:33:04 ---- kernel: NET: Registered protocol family 1
Mar 09 06:33:04 ---- kernel: pci 0000:01:00.0: Boot video device
Mar 09 06:33:04 ---- kernel: PCI: CLS 64 bytes, default 64
Mar 09 06:33:04 ---- kernel: Unpacking initramfs...
Mar 09 06:33:04 ---- kernel: Freeing initrd memory: 3084K (ffff88007fcfd000 - ffff880080000000)
Mar 09 06:33:04 ---- kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Mar 09 06:33:04 ---- kernel: software IO TLB [mem 0xd974f000-0xdd74f000] (64MB) mapped at [ffff8800d974f000-ffff8800dd74efff]
Mar 09 06:33:04 ---- kernel: Scanning for low memory corruption every 60 seconds
Mar 09 06:33:04 ---- kernel: audit: initializing netlink socket (disabled)
Mar 09 06:33:04 ---- kernel: type=2000 audit(1394371982.283:1): initialized
Mar 09 06:33:04 ---- kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Mar 09 06:33:04 ---- kernel: zbud: loaded
Mar 09 06:33:04 ---- kernel: VFS: Disk quotas dquot_6.5.2
Mar 09 06:33:04 ---- kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Mar 09 06:33:04 ---- kernel: msgmni has been set to 23946
Mar 09 06:33:04 ---- kernel: Key type big_key registered
Mar 09 06:33:04 ---- kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Mar 09 06:33:04 ---- kernel: io scheduler noop registered
Mar 09 06:33:04 ---- kernel: io scheduler deadline registered
Mar 09 06:33:04 ---- kernel: io scheduler cfq registered (default)
Mar 09 06:33:04 ---- kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Mar 09 06:33:04 ---- kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 09 06:33:04 ---- kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Mar 09 06:33:04 ---- kernel: intel_idle: MWAIT substates: 0x1120
Mar 09 06:33:04 ---- kernel: intel_idle: v0.4 model 0x3A
Mar 09 06:33:04 ---- kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
Mar 09 06:33:04 ---- kernel: GHES: HEST is not enabled!
Mar 09 06:33:04 ---- kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Mar 09 06:33:04 ---- kernel: Linux agpgart interface v0.103
Mar 09 06:33:04 ---- kernel: rtc_cmos 00:05: RTC can wake from S4
Mar 09 06:33:04 ---- kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Mar 09 06:33:04 ---- kernel: rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Mar 09 06:33:04 ---- kernel: Intel P-state driver initializing.
Mar 09 06:33:04 ---- kernel: Intel pstate controlling: cpu 0
Mar 09 06:33:04 ---- kernel: Intel pstate controlling: cpu 1
Mar 09 06:33:04 ---- kernel: Intel pstate controlling: cpu 2
Mar 09 06:33:04 ---- kernel: Intel pstate controlling: cpu 3
Mar 09 06:33:04 ---- kernel: drop_monitor: Initializing network drop monitor service
Mar 09 06:33:04 ---- kernel: TCP: cubic registered
Mar 09 06:33:04 ---- kernel: NET: Registered protocol family 10
Mar 09 06:33:04 ---- kernel: NET: Registered protocol family 17
Mar 09 06:33:04 ---- kernel: Key type dns_resolver registered
Mar 09 06:33:04 ---- kernel: registered taskstats version 1
Mar 09 06:33:04 ---- kernel: Magic number: 6:65:584
Mar 09 06:33:04 ---- kernel: pci_bus 0000:05: hash matches
Mar 09 06:33:04 ---- kernel: rtc_cmos 00:05: setting system clock to 2014-03-09 13:33:02 UTC (1394371982)
Mar 09 06:33:04 ---- kernel: PM: Hibernation image not present or could not be loaded.
Mar 09 06:33:04 ---- kernel: Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
Mar 09 06:33:04 ---- kernel: Write protecting the kernel read-only data: 8192k
Mar 09 06:33:04 ---- kernel: Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
Mar 09 06:33:04 ---- kernel: Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
Mar 09 06:33:04 ---- kernel: random: systemd-tmpfile urandom read with 1 bits of entropy available
Mar 09 06:33:04 ---- systemd-udevd[56]: starting version 210
Mar 09 06:33:04 ---- kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar 09 06:33:04 ---- kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Mar 09 06:33:04 ---- kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 09 06:33:04 ---- kernel: ACPI: bus type USB registered
Mar 09 06:33:04 ---- kernel: usbcore: registered new interface driver usbfs
Mar 09 06:33:04 ---- kernel: usbcore: registered new interface driver hub
Mar 09 06:33:04 ---- kernel: usbcore: registered new device driver usb
Mar 09 06:33:04 ---- kernel: SCSI subsystem initialized
Mar 09 06:33:04 ---- kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 09 06:33:04 ---- kernel: ehci-pci: EHCI PCI platform driver
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1a.0: EHCI Host Controller
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1a.0: debug port 2
Mar 09 06:33:04 ---- kernel: libata version 3.00 loaded.
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f18000
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Mar 09 06:33:04 ---- kernel: hub 1-0:1.0: USB hub found
Mar 09 06:33:04 ---- kernel: hub 1-0:1.0: 2 ports detected
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1d.0: EHCI Host Controller
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1d.0: debug port 2
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
Mar 09 06:33:04 ---- kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Mar 09 06:33:04 ---- kernel: hub 2-0:1.0: USB hub found
Mar 09 06:33:04 ---- kernel: hub 2-0:1.0: 2 ports detected
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
Mar 09 06:33:04 ---- kernel: hub 3-0:1.0: USB hub found
Mar 09 06:33:04 ---- kernel: hub 3-0:1.0: 4 ports detected
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Mar 09 06:33:04 ---- kernel: hub 4-0:1.0: USB hub found
Mar 09 06:33:04 ---- kernel: hub 4-0:1.0: 4 ports detected
Mar 09 06:33:04 ---- kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Mar 09 06:33:04 ---- kernel: ahci 0000:00:1f.2: version 3.0
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:07:00.0: xHCI Host Controller
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
Mar 09 06:33:04 ---- kernel: ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
Mar 09 06:33:04 ---- kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
Mar 09 06:33:04 ---- kernel: ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
Mar 09 06:33:04 ---- kernel: scsi0 : ahci
Mar 09 06:33:04 ---- kernel: scsi1 : ahci
Mar 09 06:33:04 ---- kernel: scsi2 : ahci
Mar 09 06:33:04 ---- kernel: scsi3 : ahci
Mar 09 06:33:04 ---- kernel: scsi4 : ahci
Mar 09 06:33:04 ---- kernel: scsi5 : ahci
Mar 09 06:33:04 ---- kernel: ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 42
Mar 09 06:33:04 ---- kernel: ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 42
Mar 09 06:33:04 ---- kernel: ata3: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16200 irq 42
Mar 09 06:33:04 ---- kernel: ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 42
Mar 09 06:33:04 ---- kernel: ata5: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16300 irq 42
Mar 09 06:33:04 ---- kernel: ata6: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16380 irq 42
Mar 09 06:33:04 ---- kernel: ahci 0000:03:00.0: irq 43 for MSI/MSI-X
Mar 09 06:33:04 ---- kernel: ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
Mar 09 06:33:04 ---- kernel: ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Mar 09 06:33:04 ---- kernel: ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
Mar 09 06:33:04 ---- kernel: scsi6 : ahci
Mar 09 06:33:04 ---- kernel: scsi7 : ahci
Mar 09 06:33:04 ---- kernel: ata7: SATA max UDMA/133 abar m512@0xf7d00000 port 0xf7d00100 irq 43
Mar 09 06:33:04 ---- kernel: ata8: SATA max UDMA/133 abar m512@0xf7d00000 port 0xf7d00180 irq 43
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:07:00.0: irq 44 for MSI/MSI-X
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:07:00.0: irq 45 for MSI/MSI-X
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X
Mar 09 06:33:04 ---- kernel: hub 5-0:1.0: USB hub found
Mar 09 06:33:04 ---- kernel: hub 5-0:1.0: 2 ports detected
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:07:00.0: xHCI Host Controller
Mar 09 06:33:04 ---- kernel: xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
Mar 09 06:33:04 ---- kernel: hub 6-0:1.0: USB hub found
Mar 09 06:33:04 ---- kernel: hub 6-0:1.0: 2 ports detected
Mar 09 06:33:04 ---- kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
Mar 09 06:33:04 ---- kernel: ata1: SATA link down (SStatus 0 SControl 300)
Mar 09 06:33:04 ---- kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 09 06:33:04 ---- kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 09 06:33:04 ---- kernel: ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Mar 09 06:33:04 ---- kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Mar 09 06:33:04 ---- kernel: ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Mar 09 06:33:04 ---- kernel: ata2.00: ATA-8: Corsair CSSD-V64GB2, 2.2, max UDMA/133
Mar 09 06:33:04 ---- kernel: ata2.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
Mar 09 06:33:04 ---- kernel: ata7: SATA link down (SStatus 0 SControl 300)
Mar 09 06:33:04 ---- kernel: ata5: SATA link down (SStatus 0 SControl 300)
Mar 09 06:33:04 ---- kernel: ata6: SATA link down (SStatus 0 SControl 300)
Mar 09 06:33:04 ---- kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 09 06:33:04 ---- kernel: ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Mar 09 06:33:04 ---- kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Mar 09 06:33:04 ---- kernel: ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Mar 09 06:33:04 ---- kernel: ata2.00: configured for UDMA/133
Mar 09 06:33:04 ---- kernel: scsi 1:0:0:0: Direct-Access ATA Corsair CSSD-V64 2.2 PQ: 0 ANSI: 5
Mar 09 06:33:04 ---- kernel: ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Mar 09 06:33:04 ---- kernel: ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Mar 09 06:33:04 ---- kernel: ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Mar 09 06:33:04 ---- kernel: sd 1:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
Mar 09 06:33:04 ---- kernel: sd 1:0:0:0: [sda] Write Protect is off
Mar 09 06:33:04 ---- kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
Mar 09 06:33:04 ---- kernel: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 09 06:33:04 ---- kernel: ata4.00: ATA-8: WDC WD6400AACS-00G8B1, 05.04C05, max UDMA/133
Mar 09 06:33:04 ---- kernel: ata4.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Mar 09 06:33:04 ---- kernel: ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Mar 09 06:33:04 ---- kernel: ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Mar 09 06:33:04 ---- kernel: ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Mar 09 06:33:04 ---- kernel: ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Mar 09 06:33:04 ---- kernel: ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Mar 09 06:33:04 ---- kernel: ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Mar 09 06:33:04 ---- kernel: sda: sda1
Mar 09 06:33:04 ---- kernel: ata4.00: configured for UDMA/133
Mar 09 06:33:04 ---- kernel: sd 1:0:0:0: [sda] Attached SCSI disk
Mar 09 06:33:04 ---- kernel: hub 1-1:1.0: USB hub found
Mar 09 06:33:04 ---- kernel: hub 1-1:1.0: 6 ports detected
Mar 09 06:33:04 ---- kernel: ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
Mar 09 06:33:04 ---- kernel: ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Mar 09 06:33:04 ---- kernel: ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Mar 09 06:33:04 ---- kernel: ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Mar 09 06:33:04 ---- kernel: ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Mar 09 06:33:04 ---- kernel: ata3.00: configured for UDMA/133
Mar 09 06:33:04 ---- kernel: scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
Mar 09 06:33:04 ---- kernel: sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Mar 09 06:33:04 ---- kernel: sd 2:0:0:0: [sdb] Write Protect is off
Mar 09 06:33:04 ---- kernel: sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Mar 09 06:33:04 ---- kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD6400AACS-0 05.0 PQ: 0 ANSI: 5
Mar 09 06:33:04 ---- kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 09 06:33:04 ---- kernel: sd 3:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
Mar 09 06:33:04 ---- kernel: sd 3:0:0:0: [sdc] Write Protect is off
Mar 09 06:33:04 ---- kernel: sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Mar 09 06:33:04 ---- kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 09 06:33:04 ---- kernel: sdc: sdc1 sdc2
Mar 09 06:33:04 ---- kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
Mar 09 06:33:04 ---- kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
Mar 09 06:33:04 ---- kernel: sdb: sdb1 sdb2
Mar 09 06:33:04 ---- kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
Mar 09 06:33:04 ---- kernel: hub 2-1:1.0: USB hub found
Mar 09 06:33:04 ---- kernel: hub 2-1:1.0: 8 ports detected
Mar 09 06:33:04 ---- kernel: usb 1-1.1: new high-speed USB device number 3 using ehci-pci
Mar 09 06:33:04 ---- kernel: ata8: SATA link down (SStatus 0 SControl 300)
Mar 09 06:33:04 ---- kernel: usb 2-1.5: new low-speed USB device number 3 using ehci-pci
Mar 09 06:33:04 ---- kernel: tsc: Refined TSC clocksource calibration: 3400.023 MHz
Mar 09 06:33:04 ---- kernel: hidraw: raw HID events driver (C) Jiri Kosina
Mar 09 06:33:04 ---- kernel: usbcore: registered new interface driver usbhid
Mar 09 06:33:04 ---- kernel: usbhid: USB HID core driver
Mar 09 06:33:04 ---- kernel: input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input1
Mar 09 06:33:04 ---- kernel: hid-generic 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.5/input0
Mar 09 06:33:04 ---- kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Mar 09 06:33:04 ---- kernel: random: nonblocking pool is initialized
Mar 09 06:33:04 ---- systemd[1]: systemd 210 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
Mar 09 06:33:04 ---- systemd[1]: Detected architecture 'x86-64'.
Mar 09 06:33:04 ---- systemd[1]: Set hostname to <---->.
Mar 09 06:33:04 ---- systemd[1]: Configuration file /etc/systemd/system/netctl@wlp0s26u1u1\x2dXXXXX.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
Mar 09 06:33:04 ---- systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
Mar 09 06:33:04 ---- systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Mar 09 06:33:04 ---- systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Mar 09 06:33:04 ---- systemd[1]: Expecting device sys-subsystem-net-devices-wlp0s26u1u1.device...
Mar 09 06:33:04 ---- systemd[1]: Starting Remote File Systems.
Mar 09 06:33:04 ---- systemd[1]: Reached target Remote File Systems.
Mar 09 06:33:04 ---- systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Mar 09 06:33:04 ---- systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Mar 09 06:33:04 ---- systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Mar 09 06:33:04 ---- systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Mar 09 06:33:04 ---- systemd[1]: Starting Paths.
Mar 09 06:33:04 ---- systemd[1]: Reached target Paths.
Mar 09 06:33:04 ---- systemd[1]: Starting Encrypted Volumes.
Mar 09 06:33:04 ---- systemd[1]: Reached target Encrypted Volumes.
Mar 09 06:33:04 ---- systemd[1]: Starting Swap.
Mar 09 06:33:04 ---- systemd[1]: Reached target Swap.
Mar 09 06:33:04 ---- systemd[1]: Expecting device dev-disk-by\x2duuid-174c1e56\x2de13d\x2d4806\x2db77b\x2dfd36effe9148.device...
Mar 09 06:33:04 ---- systemd[1]: Expecting device dev-disk-by\x2duuid-7553f5d7\x2deb2c\x2d4f49\x2db9a1\x2d3e1c2850bf5f.device...
Mar 09 06:33:04 ---- systemd[1]: Starting Root Slice.
Mar 09 06:33:04 ---- systemd[1]: Created slice Root Slice.
Mar 09 06:33:04 ---- systemd[1]: Starting User and Session Slice.
Mar 09 06:33:04 ---- systemd[1]: Created slice User and Session Slice.
Mar 09 06:33:04 ---- systemd[1]: Starting Device-mapper event daemon FIFOs.
Mar 09 06:33:04 ---- systemd[1]: Listening on Device-mapper event daemon FIFOs.
Mar 09 06:33:04 ---- systemd[1]: Starting Delayed Shutdown Socket.
Mar 09 06:33:04 ---- systemd[1]: Listening on Delayed Shutdown Socket.
Mar 09 06:33:04 ---- systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Mar 09 06:33:04 ---- systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Mar 09 06:33:04 ---- systemd[1]: Starting LVM2 metadata daemon socket.
Mar 09 06:33:04 ---- systemd[1]: Listening on LVM2 metadata daemon socket.
Mar 09 06:33:04 ---- systemd[1]: Starting udev Kernel Socket.
Mar 09 06:33:04 ---- systemd[1]: Listening on udev Kernel Socket.
Mar 09 06:33:04 ---- systemd[1]: Starting udev Control Socket.
Mar 09 06:33:04 ---- systemd[1]: Listening on udev Control Socket.
Mar 09 06:33:04 ---- systemd[1]: Starting Journal Socket.
Mar 09 06:33:04 ---- systemd[1]: Listening on Journal Socket.
Mar 09 06:33:04 ---- systemd[1]: Starting System Slice.
Mar 09 06:33:04 ---- systemd[1]: Created slice System Slice.
Mar 09 06:33:04 ---- systemd[1]: Started File System Check on Root Device.
Mar 09 06:33:04 ---- systemd[1]: Starting system-systemd\x2dfsck.slice.
Mar 09 06:33:04 ---- systemd[1]: Created slice system-systemd\x2dfsck.slice.
Mar 09 06:33:04 ---- systemd[1]: Mounting Temporary Directory...
Mar 09 06:33:04 ---- systemd[1]: Starting system-netctl.slice.
Mar 09 06:33:04 ---- systemd[1]: Created slice system-netctl.slice.
Mar 09 06:33:04 ---- systemd[1]: Starting system-getty.slice.
Mar 09 06:33:04 ---- systemd[1]: Created slice system-getty.slice.
Mar 09 06:33:04 ---- systemd[1]: Started Set Up Additional Binary Formats.
Mar 09 06:33:04 ---- systemd[1]: Starting Load Kernel Modules...
Mar 09 06:33:04 ---- systemd[1]: Mounting Huge Pages File System...
Mar 09 06:33:04 ---- systemd[1]: Mounting Debug File System...
Mar 09 06:33:04 ---- systemd[1]: Starting Apply Kernel Variables...
Mar 09 06:33:04 ---- systemd[1]: Mounting POSIX Message Queue File System...
Mar 09 06:33:04 ---- systemd[1]: Starting udev Coldplug all Devices...
Mar 09 06:33:04 ---- systemd[1]: Starting Create list of required static device nodes for the current kernel...
Mar 09 06:33:04 ---- systemd[1]: Starting Setup Virtual Console...
Mar 09 06:33:04 ---- systemd[1]: Starting Journal Service...
Mar 09 06:33:04 ---- systemd[1]: Started Journal Service.
Mar 09 06:33:04 ---- kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
Mar 09 06:33:04 ---- kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
Mar 09 06:33:04 ---- kernel: ACPI: Power Button [PWRB]
Mar 09 06:33:04 ---- kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Mar 09 06:33:04 ---- kernel: ACPI: Power Button [PWRF]
Mar 09 06:33:04 ---- kernel: AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
Mar 09 06:33:04 ---- kernel: AMD IOMMUv2 functionality not available on this system
Mar 09 06:33:04 ---- systemd-journal[136]: Journal started
Mar 09 06:33:04 ---- systemd[1]: Starting Slices.
Mar 09 06:33:04 ---- systemd[1]: Reached target Slices.
Mar 09 06:33:04 ---- systemd[1]: Starting Remount Root and Kernel File Systems...
Mar 09 06:33:04 ---- systemd[1]: Started Apply Kernel Variables.
Mar 09 06:33:04 ---- systemd[1]: Started Setup Virtual Console.
Mar 09 06:33:04 ---- systemd[1]: Mounted Debug File System.
Mar 09 06:33:04 ---- systemd[1]: Mounted Huge Pages File System.
Mar 09 06:33:04 ---- systemd[1]: Started udev Coldplug all Devices.
Mar 09 06:33:04 ---- systemd[1]: Mounted POSIX Message Queue File System.
Mar 09 06:33:04 ---- systemd[1]: Mounted Temporary Directory.
Mar 09 06:33:04 ---- systemd[1]: Started Remount Root and Kernel File Systems.
Mar 09 06:33:04 ---- systemd[1]: Starting Create static device nodes in /dev...
Mar 09 06:33:04 ---- systemd[1]: Started Create static device nodes in /dev.
Mar 09 06:33:04 ---- systemd[1]: Starting udev Kernel Device Manager...
Mar 09 06:33:04 ---- systemd[1]: Starting Local File Systems (Pre).
Mar 09 06:33:04 ---- systemd[1]: Reached target Local File Systems (Pre).
Mar 09 06:33:04 ---- systemd[1]: Started udev Kernel Device Manager.
Mar 09 06:33:04 ---- systemd-udevd[150]: starting version 210
Mar 09 06:33:04 ---- kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Mar 09 06:33:04 ---- kernel: Disabling lock debugging due to kernel taint
Mar 09 06:33:04 ---- systemd-modules-load[126]: Inserted module 'fglrx'
Mar 09 06:33:04 ---- kernel: <6>[fglrx] Maximum main memory to use for locked dma buffers: 11672 MBytes.
Mar 09 06:33:04 ---- kernel: <6>[fglrx] vendor: 1002 device: 6738 count: 1
Mar 09 06:33:04 ---- kernel: <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
Mar 09 06:33:04 ---- kernel: <6>[fglrx] Kernel PAT support is enabled
Mar 09 06:33:04 ---- kernel: <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
Mar 09 06:33:04 ---- systemd-modules-load[126]: Inserted module 'vboxdrv'
Mar 09 06:33:04 ---- systemd-modules-load[126]: Inserted module 'vboxnetadp'
Mar 09 06:33:04 ---- kernel: vboxdrv: Found 4 processor cores.
Mar 09 06:33:04 ---- kernel: vboxdrv: fAsync=0 offMin=0x179 offMax=0x32f1
Mar 09 06:33:04 ---- kernel: vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Mar 09 06:33:04 ---- kernel: vboxdrv: Successfully loaded version 4.3.8_OSE (interface 0x001a0007).
Mar 09 06:33:04 ---- systemd-modules-load[126]: Inserted module 'vboxnetflt'
Mar 09 06:33:04 ---- systemd-modules-load[126]: Inserted module 'vboxpci'
Mar 09 06:33:04 ---- systemd[1]: Started Load Kernel Modules.
Mar 09 06:33:04 ---- systemd[1]: Mounted FUSE Control File System.
Mar 09 06:33:04 ---- systemd[1]: Mounting Configuration File System...
Mar 09 06:33:04 ---- kernel: vboxpci: IOMMU not found (not registered)
Mar 09 06:33:04 ---- systemd[1]: Mounted Configuration File System.
Mar 09 06:33:04 ---- kernel: ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
Mar 09 06:33:04 ---- kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar 09 06:33:04 ---- kernel: ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPR2 1 (20131115/utaddress-251)
Mar 09 06:33:04 ---- kernel: ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
Mar 09 06:33:04 ---- kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar 09 06:33:04 ---- kernel: ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPR2 1 (20131115/utaddress-251)
Mar 09 06:33:04 ---- kernel: ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
Mar 09 06:33:04 ---- kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar 09 06:33:04 ---- kernel: lpc_ich: Resource confl -
Migrate switches from different networks to a single network
Hello, I have a question on migrating C3750 switches between networks.
Our current situation is that we have two networks.
We control the cores on both networks but do not controll all the edge devices on both networks.
We can not access the IOS and configuration on a number of switches because we don't have the login information for those.
In the future if we are to take control of those edge devices how can we modify the IOS and configuration settings for multiple switches at one time?
Within the core we can modify vlans, destroy and recreate to suit our purposes, so that's easy enough.
We would rather not have to visit each and every switch and do this manually as there are over 40 switches and only 2 admins.
Manually doing this requires using the password recovery option method to change the IOS.
Once done we should be able to update the config via CISCOWorks on all the devices,
Or we could do it the other way around and update the config and then update the IOS via CISCOWorks.
Our wish is to attempt to do both via CISCOWorks or some other automated method.
ejHi,
Can this be acheived by normal TMS configuration (without Extended Transport Control)? If yes how?
Yes.
Understand the following basic relationship behind transporting chagnes using TMS
....Repository Objects ->are assigned to-> Package ->are assigned to->Single Transport Layer ->is assigned to-> Single Transport Route -> Target System.
The basic concept behind standard Transport Control is that every repository object in Source System (e.g Dev-System) is assigned (via a package) to a certain transport layer, it follows that a change request can only have one target system. So, you can transport change requests from multiple clients of Development System, which you can import into QUA system's clients upon release.
With the standard Transport control program, it is not possible to create two transport routes with the same transport layer from one SAP System. Thus, The extended Transport Control program is used for transporting the changes based on Client specific Transport Routes by using the concept of Transport Group. Using this, one can transport changes to multiple systems, multiple clients using the same transport layer.
Regards
Bhavik G. Shroff -
Is it possible to change network adapter priority in windows 7 by command line?
Ik need to change my users network adapters so that the LAN network adaperts have a higher priority than the WLAN adapters.
I would prefer to do it trouhg a command line so that is can distrubute it with SSCM.
Can annybody help me??I've found the following Blog article for you:
http://win7settings.blogspot.be/2012/04/how-to-set-network-adapter-priorities.html
From the Command Line
Unfortunately there is no out-of-the-box command line interface for these Advanced settings described above. Luckily, there are two ways to set the priorities from the command line. The more difficult way is to set metrics for each network adapter (using netsh). The much easier way (easier to manage too) is to use nvspbind made by Microsoft. If you set the priorities using nvspbind, the effects can also be seen in the Advanced settings in ncpa.cpl. Here is how you use nvspbind:
Go to http://archive.msdn.microsoft.com/nvspbind and download nvspbind. Extract the nvspbind.exe and copy it to the target machine and run:
nvspbind.exe /++ "Wireless Network Connection" ms_tcpip
nvspbind.exe /++ "Wireless Network Connection" ms_tcpip6
nvspbind.exe /++ "Local Area Connection" ms_tcpip
nvspbind.exe /++ "Local Area Connection" ms_tcpip6
And that's it! You're done.
This will set the priorities (IPv4 and IPv6) to:
1. LAN
2. WLAN
3. WAN (if present) -
I keep getting a message on startup saying 'Do you want the application "KodakAiOBonjourAgent .app" to accept incoming network connections?' It says settings may be changed in the Firewall pane of Security but I don't see how. Doesn't matter what I click (Deny/Submit). The message still pops up on starup. I have a Kodak printer and am running Mavericks but I don't think it started when I upgraded.
Just fixed this on my machine, the easiest way to remove this pop-up assuming you are no longer needing that software to print is the following:
Open Finder
Go > Go To Folder...
Type In: "~/Library/Application Support"
Delete All Folders Named Kodak
Open System Preferences
Go to "Security & Privacy"
Click the lock and enter your admin password
Click the Firewall Tab
Go to "Firewall Options..."
Find KodakAiO
Right-click KodakAiOBonjourAgent or equivalent (I forget the exact name)
Click "Show in Finder"
Go Back to a folder and delete the Kodak Folder there.
Remove Kodak from Firewall Options by selecting it and clicking the " - " button the base of the list.
or
Open Finder
Go > Go To Folder...
Type In: "~/Library/Printers"
Delete All Folders Named Kodak
I'm going off memory, so If I forgot something let me know. -
Hi
I have a new 21 inch imac oct 2011 version. I installed bootcamp and windows xp on my machine and i also installed parallels 6.
Paralleles works great and i can open any program with it. But bootcamp also works EXCEPT it refuses to give me access to the internet. I installed the bootcamp drivers from my snow leopard disk, it did not make a difference. All the drivers installed but still no internet. I then installed the bootcamp drivers from the gray mac osx disk (#1) but it stopped installing with an error number ( 2753) and it said that the package was damaged.
I have tried everything; i opened each disk and trieed installing the files separately. Nothing.
What i see missing in my devices screen in XP is the network adapter.
I have a router (dlink-dr615) and it is connected by ethernet to my imac. I wonder if THIS might have anything to do with the problem. Any guidance would be much appreciated.
Thank youI'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck.
Maybe you are looking for
-
Type of configuration for web service in SOA manager
Hi Experts, could you please let me know while creating logical port for Web sevice security which type of configuration should I select in SOA manager. There are three types of configuration. 1> WSDL Based Configuration2>Manual Configuration and 3>P
-
How to delete a member in Essbase
How can we delete a member in Essbase using ODI
-
Hi, I have the following data as a result of my SQL. I have used GROUP BY CUBE Category Status Count A S 5 A F 10 A R 5 A Tot 20 B S 15 B F 10 B R 5 B Tot 30 I need to get the new row ST which is Sum of S and F status records for each Category. For E
-
Saving a Title Created in Premiere CS5
When I worked with Premiere Pro 1.5 and made a title, it would automatically be saved in the Adobe folder located in My Documents so I could use it for another project if I wanted to in the future or delete it at my leisure. With Premiere CS5, I crea
-
How to make weather shown in the notification bar
I'm running IOS5 on ipad2. Can weather be shown in the notification bar ? If yes, how do I do it?