Change from Internal to External Number range for customer account group

Hi,
We would like to change the number range assignment for a customer account group from internal to external. The external number range assignment check box is greyed out as a few numbers in the range have already been used up.  We want to do the internal to external assignemnt change, create a customer of a specific number, and revert the range back to internal assignment. Is this possible?
Appreciate your help.
Ram

Hi,
Please do the below steps:-
(1) Go to XDN1 and click on "Maintain status" button. Note down the current status and change the status to zero. Save.
(2) Again go to SDN1 and click on "Maintain No. Range" button, and change the no. range to external. Save. (if that number range is maintained for multiple years, then make it external for the first yer and for the subsequent years, it will become automatically.)
(3) Then create your customer with specific number.
(4) Then go to XDN1 and click on "Maintain No. Range" button, and change the no. range to internal. Save. (if that number range is maintained for multiple years, then make it internal for the first yer and for the subsequent years, it will become automatically.)
(5) Again go to XDN1 and click on "Maintain status" button. Maintain the current status as the number noted down in step (1) above. Save. (In case number created in step (4) is greater than the number notes in step (1), maintain the number of step (4) in current status.)
Regards,
Gaurav

Similar Messages

  • External Number Range for Customer Master

    Hi,
    If we give External Number Range for a Customer Account Group in SPRO, Can we let the System to generate the Customer Number(Internal)? Or always we should provide a Number for the customer?
    Thanks,
    Sekhar.J

    Hi,
    System will not consider two Number Range Assignment, simultaneously.
    Here are few links:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/01/a9b191455711d182b40000e829fbfe/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/53/c9864aca3711d2b494006094b9114a/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/ea/cffb3aebc63b61e10000000a11402f/frameset.htm
    Best Regards,
    Amit

  • Internal and external number range for a deivce

    Hi Experts..
    We have a client requirement where in we need to have both external and internal number ranges defined for the device.
    But while creating a device it always takes external number range and never takes internal number range.
    What is the possible reason for it and how can i rectify it.

    Hi Arvind
      do u mean even when an  externam  name is provided in  the device creation and still the screen does not accept it?
    let me know
    kr
    raj

  • PO number range- change from internal to external  and then change it back

    we have following situation- we had certain issues with the system where most of the data got curreptrd except data relative to procurement for dates March 7 to March 30.  We have extracted the procurement data - PR / PO etc for the dates March 7 to March 30 and we want to upload this data in the uncorrupted enviornment dated  March 6 using the old numbers originally assigned by the system.
    I need to change the configuration for PR and PO number range from Internal to external so we can upload PR and POsfrom March7 to March 30 and then swich the number ranges back to internal so we can enter new data dating from March 31.
    What is the best way to do this?
    Thanks in advance
    Raj

    Hi
    Create external number range and assign  it to theno. range external in that Document type then you can use both internal and external number ranges for that doc without disturbing the system once completed remove the external number for that doc type. while creating the PO give the number you want before saving so that the PO will be saved with the number you had given.
    Note: Make sure that you are not using duplicate PO no already assigned
    Kiran

  • Number range for customer

    Dear Friends,
    How sud I maintain number range for the customer?....

    Hi
    No ranges are defined customers account groups in t code XN01 and
    assigned to the respective account group in  t code OBAR
    Img-financial accounting (old/new both you can use)-accounts receivable and accounts payable--customer accounts-master data----preparations for creating customer master data
    (The whole controls you can see here under this)
    Here first you will define your account group (for field selection)
    1. T code OBD2 define  account groups with screen layout (customer accounts) activity
    then you will define no ranges for your account group
    2. T code XN01 define no ranges for customer account groups
    then you will assign no ranges for your respective account group
    3. T code OBAR assign no ranges for account group
    You have to go to change intervals and define your pwn available intervals and then assign them to the respective account group
    So while you create a customer in XD01 in the respective account group that no range will be automatically assigned if it is internal or we can give our no if it is external
    Note if you define a new account group then you have to define partner functions also in img-sd-basic functions-setup partner determination---setup partner determination for CMR apart from the three major activities listed above
    Regards
    Raja

  • External number ranges in asset accounting

    Hi All
    Why we need to select external number range for asset accounting number ranges why not other sub modules?
    useful answers will be rewarded with points
    Regards
    Prasad

    hi hariprasad,
    you only have to do that for depreciation posting. the reason for that is the way the program which posts the depreciation is designed. it creates a batch input with the opstings adding the doucment numbers as well and saving these document numbers into a table. when you want to post the depreciation for next month (period), first it will check if documents are already posted for previous period (or forgotten there in the batch input session). this is only valid before 4.7 (or 5.0?), from that release depreciation is also posted with internal numbered documents.
    hope this helps
    ec

  • Number assignment for vendor account group

    Hi all,
    I would like to assign no range for my newly created vendor account group in xkn1
    But how to create it with reference to my acocunt group....kindly explain in detail
    tks
    kali

    Hi,
    Use OMSJ trxn code to assign Number ranges for Vendor Account Groups.
    Reg,
    Ashok
    Rewards Welcome

  • What should i take for customer account group

    wat is the best to customize customer account group
    i m thginking to creat one exportcustomer and other one is domestic
    or else i ll make one one as sold to party
    plz help

    <i><u><b>Customer Master</b></u></i>
    <u><b>Account Group</b></u>
    <b>Maintain Number Range for Account Group</b>
    Use
    The purpose of this activity is to control number range of Account Group.
    Procedure
          Access the activity using one of the following navigation options:
    IMG --> Financial Accounting (New) &#61614; Accounts Receivable and Accounts Payable &#61614; Customer Accounts &#61614; Master Data &#61614; Preparations for Creating Customer Master Data &#61614; Create Number Ranges for Customer Accounts &#61614; Select the Icon to maintain Number Range
    Transaction Code     SPRO
    Data to be maintained:
    No | From | To | Current No | Ext (Tick in Check Box)
    01 | 0000000001 | 0000099999 | 0 | No
    02 | 0000100000 | 0000299999 | 0 | No
    XX | A | ZZZZZZZZZZ | Yes
    <b>Assign Number Range to Account Group</b>
    Use
    The purpose of this activity is to maintain number range of Account Group.
    Procedure
          Access the activity using one of the following navigation options:
    IMG --> Financial Accounting (New) &#61614; Accounts Receivable and Accounts Payable &#61614; Customer Accounts &#61614; Master Data &#61614; Preparations for Creating Customer Master Data &#61614; Assign Number Ranges to Customer Account Groups
    Transaction Code     SPRO
          Data to be maintained:
    Group | Name | Number Range
    0001 | Sold-to party | XX
    0002 | Goods recipient | XX
    0003 | Payer | XX
    0004 | Bill-to party | XX
    <b>Define Account Groups with Screen Layout (Customers)</b>
    Use
    In this step, you determine the account group of the customer.
    Procedure
    Access the activity using one of the following navigation options:
    IMG --> Financial Accounting (New) &#61614; Accounts Receivable and Accounts Payable &#61614; Customer Accounts &#61614; Master Data &#61614; Preparations for Creating Customer Master Data &#61614; Define Account Groups with Screen Layout (Customers)
    Transaction Code     SPRO
    The groups indicated below are a few examples. There are many groups in Standard SAP & if we require additional Group, it can be copied from appropriate group & maintained.
    Group | Name
    0001 | Sold-to party
    0002 | Goods recipient
    0003 | Payer
    0004 | Bill-to party
    0005 | Prospective customer
    0006 | Competitor
    Select Sold-to-party &#61664; go to Details &#61664; Double Click on General data / Company code data / Sales data. It will take to next screen which details Tab Pages of General data / Company code data / Sales data. Double Click on Tab Page for example: Address, Control, Marketing & so on. Here you can maintain whether the field is to be Suppress, Req. Entry, Opt. entry or Display
    Regards,
    Rajesh Banka
    Reward points if helpful

  • External number range for billing document (Invoices)

    Hi guys,
    I have a requirement from one of client to implement external number range for billing documents.
    I can only see a provision for internal number range in customising for Billing document type.
    Please can you assist me with detailson how to set up external number range for billing documents (Invoices).
    Thanks, Felix

    Hi Felix
    I think the similar requirement is in Venezuela also.
    So pl. check the SAP Note 849438 . As per the note :-
    The solution is delivered in the indicated support packages. In case you can not implement the correspondin support package for your release immediately, please follow the procedure described below:
    1. In the Data Dictionary Editor (transaction SE11) please open the definition of domain J_1AOFFNREL, go to the fixed values and add value 'P' with description 'Number Assingment using Prenumbered Forms' in a position so that the possible values remain sorted alphabetically.
    2. In the Message Editor (transaction SE91) please go to message class ICC_CN and add the new message 837 with text '&1: Official doc. numbering is not available for delivery documents!'.
    3. If you are implementing the note in release 4.6C, please create the following function modules:
    o     OFF_NUMBER_LOCAL_ASSIGN_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_ASSIGN_TW
    o     OFF_NUMBER_LOCAL_NUMBERING_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_NUMBERING_TW
    o     XBLNR_BUILD_AND_SPLIT_VE in function group IDSDCNUTIL, and then copy the interface (all parameters and exceptions) of the function module XBLNR_BUILD_AND_SPLIT_PECL
    4. Implement the source code corrections as shown below.
    The following customizing actions should be also executed when the solution by delivered by the corresponding support package. If you applied the solution manually, then please use the IMG activities listed in the section Cross-Application Components -> General Application Functions -> Cross-Application Document Numbering -> Taiwan as a reference. After the installation of the corresponding support package the customizing node for Venezuela can be used.
    1. Enable the use of business place for country Venezuela as described in the OSS Note 726537.
    2. Define the necessary document classes and configure the document types you would like to get an official document number as relevant for official document numbering in the desired mode. Please check the OSS Note 571376 for some explanations about the meaning of the different settings.
    3. Define the necessary number ranges and intervals and assign them to the combination of company code, business place, document class and validity period. If you use the customizing activity for Taiwan, then please leave the prefix field empty.
    Regards
    Amitesh

  • External number range for measuring point

    Hi experts,
    How to assign external number range for measuring point ?
    Regards
    Shashi

    I have just checked and the measurement point number is linked directly with tthe object for eaxample equipment and when I tried this I got the same result the system defaults the number based ont he internal number range.
    This being the case what is the business requirement that you need to use external numbering as this may help and someone may be able to assist either with an answer to the problem or an alternative solution.
    SAP documentation as follows:
    Create Number Ranges for Measuring Points
    In this step you define number ranges for measuring points.
    Notes
    As the numbers for measuring points are assigned internally, you should work with the standard settings. If you want to make changes, you should always use number range 01.
    Jim
    Edited by: JamesPetrie on Feb 28, 2012 2:45 PM

  • External Number Range for Billing Documents

    Hi Friends,
    Can any pls tell me how to create external number ranges for billing documents. We are trying to Map the Invoice nos from POS system to create and match the billing nos in both the systems. Pls help on how can I do this.
    Thanks
    Raj

    Check this thread
    [Re: Customize Billing Number Format|Re: Customize Billing Number Format]
    thanks
    G. Lakshmipathi

  • External number range for service items?

    I want to create Purchase order with services using BAPI. Is it possible to set external number range for the extrow / introw, so that if I need to change a service line item, I will be able to find out which service item needs to be changed.

    It depends on whether you have a service master or not.
    1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
    2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
    Makes sense?
    A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
    Regards,
    Ravi
    Message was edited by: Ravikumar Allampallam

  • External number range for material master

    Dear sap guru i want to create external number range for msterial master but i am facing problem .i used T.code MMNR but i am not able to tick external number small squar window . can anybody help me and tell me step by step
    regards
    rohit

    Hi
    In tcde MMNR select groups in the application tool bar a pencil like icon click that
    Then go to group in the top menu bar
    In that if you choose insert
    Then a dialogue box will open
    In that give text and
    there will be two lines
    First is for internal no range
    second is for external no range with the check box ticked in grey
    In that you have to choose the second one and give only the range interval
    External tick is already there ready made in the system
    If you are sure that your settings are correct in MMNR
    IMG-L.G-MATERIAL MASTER-BASIC SETTINGS-MATERIAL TYPE---DEFINE ATTRIBUTES OF MATERIAL TYPES
    in this choose your material type and click on its details
    in the general data tab there is a external no assignmentw/o check a check box is there
    Pls tick that and try to do your process by giving external no
    Regards
    raja
    Edited by: ramanathan raja on Dec 4, 2008 2:27 PM

  • Any FM for create an external number range for equipment number ????

    Hi all,
    Any FM for create an external number range for equipment number??????
    thanks & regards
    indu.

    Hi
    you can use below FM to get number range
       CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          nr_range_nr                   = 'Z1'
         object                        = 'ZTEST'
         object                        = 'ZFIREC'
         quantity                      = '1'
         subobject                     = p_compcd
         toyear                        = p_fisc
       IMPORTING
         number                        = v_seqno.
    thanks & regards,
    bhupal.

  • External Number Range for Invoice

    Hi All,
    If we  use USEREXIT_NUMBER_RANGE - RV60AFZZ to specify  external number then can we enter alpha-numeric or only numeric value.
    regards
    Debasish

    Debasish,
    Few things a wish to suggest you,
    1. SAP always says try to avoid External number ranges for invoices, as it has legal as well as technical compliances.
    2. By using user exit, even though you will enter the external numbers but in case of several and multi user systems there may be chances of inconsistencies.
    Anyway if you have decided to do this then Yes its possible you can use Alphanumeric numbers also
    Thanks,
    Raja

Maybe you are looking for

  • Batch capture issues

    I am trying to break a tape into six clips from an interview. The total media time is about 2:30. I've logged the clips, highlighted the clips in the browser, clicked on the batch capture button before a dialogue box pops up and says the capture will

  • When I first used Iprint on my android phone I could print any photo sent to me in a text. With tht

    HP photosmart premium C410       windows 7     using og droid phone with new home & biz app.   Now I cannot print photos that come to my phone from a text.  With the IPrint app I had no problem.  It seems an upgrade was worse for me I want the old on

  • Player works in Admin but not in User

    Adobe Flash Player 10 Active X installs, uninstalls, reinstalls and always works (for multiple, different websites with Flash presentations) in my Administrator User Account.  But, I cannot get it to install and work in my Name User Account (which ha

  • Sync chaos and rollback to good old non-iCloud times

    Hi. I've got a problem with iCloud sync. I posess a pair of macbooks, an iPad and an iPhone. All those gadgets are syncing to the icloud: docs, pictures and music. I'm really unhappy with how they do it, because I've got no control over the process a

  • What does the following message mean: Breadcrumb: (No corresponding region)

    I am trying to create breadcrumbs and not able to get it to work. On the Page Definition screen on the right side Shared Components section, under Breadcrumb I see the following: Breadcrumb: (No corresponding region) Does this give anybody a clue as