Change from merge to replace

I recently restored my pc and had to set up my iTunes library again.  When I plugged in my iPhone, iTunes asked whether to merge or replace the contents.  I selected to merge, but now I realize I should have selected to replace.  Can I change this now? 
iTunes says that it can't sync my iphone because there isn't enough space.  But it seems that this is due to the fact that it is trying to add to the old contents rather than replace it.

I recently restored my pc and had to set up my iTunes library again.  When I plugged in my iPhone, iTunes asked whether to merge or replace the contents.  I selected to merge, but now I realize I should have selected to replace.  Can I change this now? 
iTunes says that it can't sync my iphone because there isn't enough space.  But it seems that this is due to the fact that it is trying to add to the old contents rather than replace it.

Similar Messages

  • HP Battery status changed from "Weak" to "Replace"....

    Hi,
    I had purchased HP Laptop dv4-1211 TU in India in 2009. Now i stay in US. Recently few days back, i checked a option " HP Battery Check" in my laptop. When clicked it said my battery status is "Weak". I didn't bother much. But today when i checked it back it said " Replace". How do i go about this?
    My queries are:
    1. Is it safe to use my laptop in this condition?
    2. Battery gets heated up too much after this, so do i need to replace with a new one or can i plug in and use it, i.e i meant on AC power and not battery alone?
    Waiting for the response from u.... pls help me....

    Hi sweety2222!: most laptops that use batteries can also use AC as well
    but to be sure I'd check the manual the manual will also tell you if you can replace it, the type of battery & how to replace it as well
    good luck
    hope this helps you
                                                                                                                 spacechild

  • [svn] 2493: Partial change from revision 2216 was missed in a merge.

    Revision: 2493
    Author: [email protected]
    Date: 2008-07-15 13:30:36 -0700 (Tue, 15 Jul 2008)
    Log Message:
    Partial change from revision 2216 was missed in a merge. Making the change again.
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java

    Another approach:
    FrameMaker uses the conditions Inserted and Deleted to mark inserted and deleted text in the CMP file.
    In the Search/Replace dialog select the Deleted condition for deleted text to search for.
    Leave the Replace box empty.
    Then search for the Deleted condition and either replace (i.e. delete the text) or leave it as it is.
    After this search/replace the remaining text with the Deleted condition is correct. Therefore delete this condition without deleting the text.
    Then do the same with the Inserted condition for inserted text. Either delete this text or leave it as it is.
    Then delete this Inserted condition.

  • Merging OSB changes from two projects

    Good day,
    We have two (or possibly more) projects working on OSB. There are some assets that will be modified by more than one project but due to scope and timelines, this work cannot happen on one version.
    Is there a recommended way to merge changes from one branch of OSB assets to another branch of OSB assets? I know that under the hood it is just XML but treating the XML files as mergable assets without a tool like the Eclipse VCS support to help guide it seems like a recipe for problems.
    How do others handle this issue?
    Thanks,
    Sean

    Hi Sean,
    There is really no tool to guide us to merge two versions of the osb code. As you mentioned, given that osb code is represented as an xml file, you can try to do a comparison between them and merge them manually, but if the changes done in the different branches are significantly different I would refrain from doing so.
    #1 The best way is to let one team take the pain of redoing their changes on top of the other team's version.
    #2 One stop-gap solution is to build the logic in two different local proxies (by each team) and then have a wrapper proxy that can invoke appropriate proxy based on some logic. But if the functionality built by both the teams is similar, then the above option #1 will be the best way to maintain the code.
    Let us know in case of further issues/clarifications.
    Thanks,
    Patrick

  • I have broke my screen on my iphone and i am replacing it today at the apple shop will i be able to change from the white handset to the black handset?

    i have broke my screen on my iphone and i am replacing it today at the apple shop will i be able to change from the white handset to the black handset?

    Sorry, no. An out of warranty replacement will be of the same model, same colour, same capacity.

  • [svn:fx-trunk] 15173: Merge 15171 SpriteVisualElement change from 4. x to trunk.

    Revision: 15173
    Revision: 15173
    Author:   [email protected]
    Date:     2010-03-31 11:00:24 -0700 (Wed, 31 Mar 2010)
    Log Message:
    Merge 15171 SpriteVisualElement change from 4.x to trunk.
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/core/SpriteVisualElement.as
    Property Changed:
        flex/sdk/trunk/

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • Status change from 'Completed' to 'In Process' not allowed

    When configuring Appraisals in R/3 we want to change the  Status of 'Completed' when pressing the 'Reject' button so that it moves to the Target Status of 'In Process'
    However, we are getting an error message:
    Status change from 'Completed' to 'In Process' not allowed
    The SAP help states the following:
    In Process (only if final appraisal or part appraisal is defined)
    This has been defined at Template Level.
    So I don't understand why we are getting the message.
    Does any one else know of a way to configure the Appraisal template so that after it has been 'Rejected' it moves back into 'In Process'
    Thanks
    MN
    Points Rewards!

    Hello Andreas,
    Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
    Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
    The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
    Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
    Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
    My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
    Cheers,
    Mike

  • Error "Status change from READY to COMMITTED is not allowed"

    Dear experts,
    once again SAPs workflow environment drives me crazy with mysterious error messages.
    Some time ago I posted a question here concerning the problem that I cannot put back a workitem by using function module SAP_WAPI_PUT_BACK_WORKITEM due to a lock on this workitem which has been set right after it has been double clicked in the business workplace workflow inbox:
    [How can I put back a workitem before I'm back in the business workplace?;
    Since I do not want to dequeue the lock for the workitem in my application (where the user finds the appropriate detail information along with the function buttons for approval, rejection and F3/BACK) I tried it with calling a POPUP_TO_CONFIRM ("Do you want to put back the workitem?") directly from within the BO-method, right after returning from the FM that called my application. From here (the popup then shows in front of the business workplace instead of the application) the locking doesn't seem to be a problem any more! But whatever I do after the users decision to put the WI back - calling the FM SAP_WAPI_PUT_BACK_WORKITEM or trying to leave the method with macro EXIT_CANCELLED - leads to the error message "Status change from READY to COMMITTED is not allowed" and the workitem changes to status ERROR, too. This message seems to be bull***t, since the status of the item is supposed to go back to READY.
    Does anybody have experience to help me on that ?
    Thanks in advance
    regards
    Andreas

    Hello Andreas,
    Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
    Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
    The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
    Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
    Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
    My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
    Cheers,
    Mike

  • How to change from SLIM to KDM?

    Hello,
    I'm using the MATE desktop, OpenBox as window manager and SLIM for login.
    I'm starting to feel tired of not being able to change between various desktops without closing the main one, I mean, with OpenSUSE Ctrl+Alt+F1 to F6 are terminal ttys (it is so with Arch+SLIM too), Ctrl+Alt+F7 to F12 are graphical ttys, you can change between any of them and log in as any user you want without closing the F7 tty, or closing it, or doing whatever you want. This was petty cool in order to kill some broken task that hanged the screen or in order to do whatever.
    May I don't know how to do it with SLIM, but anytime I do Crtl+Alt+F9, for example, I just got a blank screen with an hyphen blinking. With OpenSUSE I got a graphical login screen.
    More:
    I've got installed OpenBox, MATE and enlightenment. It is suppose me to be able to change between them pressing F1, and in fact SLIM changes where says "session: XXXX" between them at the login screen, but whatever I choose SLIM ALWAYS log me in MATE. I've got to change it manually in ~/.xinitrc and logout and login again every time I want to change between sessions. I cannot do it directly at the login screen.
    Sometimes after login out and login in several times SLIM hangs and I have to reboot.
    I think all these problems comes from slim, and since with OpenSUSE, that use kdm, I had no problem I want to try kdm as login manager, but I haven't seen any guide to do it if you've got a login manager already installed. I've seen it just if it is the first system installatio. And I'm a little scared of breaking my login and spend too much time fixing it.
    How can I change from SLIM to KDM without pain?

    WOW, I had to install kdebase-workspace and it installed as dependency a functional kde system . And... I was able to choose between all the other desktops but MATE, so... kdm and all that it installed with it's already uninstalled
    But with kdm I was able to open an enlightenment session in tty 8 without closing kde in tty 7...
    ewaller wrote:Install kdm.
    Disable the slim service using systemctl
    Enable the kdm service using systemctl
    No need to uninstall slim.  Hang on to it until everything is working
    Thank you ewaller, it worked perfectly
    Scimmia wrote:Well changing to kdm is as simple as using systemctl to disable slim and enable kdm.That won't get you graphical logins on tty8+, though.
    So, how can I do it with slim?
    Raynman wrote:Do you really need a GUI to kill a program?
    No, I don't, it was just an example.
    Sounds like your xinitrc isn't quite right, check the wiki page for slim.
    I'm tired of reviewing my xinitrc in order to make slim let me choose my desktop. I think the F1 to change the session is experimental. I will open other thread in order to get some help or in order to help SLIM to solve this problem.
    And you could try LightDM instead (because KDM probably pulls in some KDE crap). It comes with dm-tool (and a replacement for gdmflexiserver) to start a new session on another tty.
    Sounds good. I'll try to make slim work perfectly and if I don't get it to work as perfectly I want I'll try other login managers.

  • I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4?

    I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4? I had the Hardcore mix and a rap mix and classic rock and grunge mixes...now I don't...I kinda want those back...the mixes I have now make no sense as most the songs on each do not correlate AT ALL to the genre mix they have been placed in. If someone could give me an answer that'd be great.

    1. Don't confuse "Apple ID" with iTunes Account ID.  You can have many Apple IDs but only one iTunes account active at a time.
    2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
    3. You can't merge the accounts - they remain separate.  Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME  and visa versa.
    4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to.

  • How to call function from Merge?

    Hello,
    I have a cursor with a loop and a Merge.
    I need to call a package function from Merge instead of direct Insert.
    Is is possible?
    Instead of Insert:
    FOR c1 in (SELECT EMP_ID..
                    FROM..
                    WHERE.. )
          Loop
            Merge into EMP em using DUAL
                On (em.EMP_ID = c1.EMP_ID)
                When Not Matched Then
                  Insert (EMP_ID..)
                  Values (c1.EMP_ID.. );
          End Loop;
    I need to call a function to get back a confirmation of insert:
    FOR c1 in (SELECT EMP_ID..
                    FROM..
                    WHERE.. )
          Loop
            Merge into EMP em using DUAL
                On (em.EMP_ID = c1.EMP_ID)
                When Not Matched Then
                  v_return := p_util.emp_audit (c1.EMP_ID.. );
          End Loop;
    I know that the second sample code is incorrect. it is just to give an idea of what I'm trying to achieve.
    Is there a way around it?
    What is the correct way to call a function from there?
    I am on Apex 4.2
    Thank you.

    Hi Leons,
    I have a cursor with a loop and a Merge.
    I need to call a package function from Merge instead of direct Insert.
    Is is possible?
        No, merge statement is not meant for it. It is meant for combining multiple DML operations.
        Refer :
    http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_9016.htm#SQLRF01606 Oracle DB 11g
    http://docs.oracle.com/database/121/SQLRF/statements_9016.htm#SQLRF01606 Oracle DB 12c
        You have to change your logic to achieve what you want.
        Hope this helps!
    Regards,
    Kiran

  • Keyboard increment changes from 1 pt by default to 1296 0000 pt

    After placing any file (using File - Place command) the values in the preference dialog box increase dramatically. E.g. Keyboard increment changes from 1 pt by default to 1296 0000 pt and Type Size/Leading from 2 pt to 72 00 pt. In short it is impossible to go on with the work.
    While launching the app a message appears saying "The Preference file is corrupt and has been reset to the default settings..." All my actions are also deleted.
    The problem is with Illustrator CS 6 on Windows 7 64 bit.

    Best I can suggest is to try uninstalling AICS6 with the Replace Preferences box checked and then reinstall.

  • Change Template Merge Fields?

    Is it possible to change the merge fields in the templates that came with Pages 09? I can change letters and envelopes to have my home information once I've opened a template, but it would save steps if Pages defaulted to them (instead of trying to provide a company name, phone number, URL, etc.).

    Hi mmccluski
    Welcome to the forum.
    Yes you can change the merge fields:
    +Menu > View > Show Invisibles+
    You can now see where every merge field is surrounded by a thin blue outline.
    These can be deleted and replaced with ordinary text or changed to other merge fields using:
    +Menu > Insert > Merge Field/Sender Field+
    also
    +Inspector > Link > Merge > Choose…+
    Any changes you make will have to be saved into your own templates, it is not a good idea to try and change Apple's.
    Peter

  • Transaction changes from 4.7 to ECC 6.0

    Hello,
    we are planning a release change from 4.7 to ECC 6.0.
    We need to know which transaction will be replaced or changed.
    We need to know this for planning test etc.
    Gruß
    Toni

    Hi Antonio,
    Please refer this wiiki link for
    Transactions Changed in ECC 6.0 - ERP Upgrade - SCN Wiki
    Regards,
    R.Brahmankar

Maybe you are looking for