Change from Nano to Video

Have Windows XP Pro
Upgraded from Nano to Video, but even though I reinstalled, the features shown in Itunes seem to be still those of the Nano. There is no "enable storage device" under general, and when connect the Ipod to the computer and attempt to copy a picture into the computer, there is no folder called DCIM on the Ipod, and the one that says photos has thumbnails and a database, which cannot be opened.
Is that because it's not "enabled" for use as jump drive?
How can I enable?
The help manuals to consult from "help" in my itunes are still those for the Ipod.
How can I make Itunes recognize that I now have a video ipod? I did put the serial in when reinstalling.
Xixa

Start here -> http://www.apple.com/support/ipod101/
when connect the Ipod to the computer and attempt to copy a picture into the computer, there is no folder called DCIM on the Ipod, and the one that says photos has thumbnails and a database, which cannot be opened.
How are you attempting to get the pix onto the iPod?
iTunes handles this and this is what the database is.
DCIM is Digital Camera IMage folder.
It is created by a digital camera, not the iPod.
There is no "enable storage device
Make sure your iPod is attached.
Open iTunes prefs -> iPod.

Similar Messages

  • Upgrading from nano to video

    I got my nano about a week after it came out with a protection plan. My question is whether I can bring it to an apple store, pay an extra $100, and get an iPod video (I bought the nano from amazon if that changes anything...)

    Apple would not exchange it for you but perhaps Amazon would. Really not sure if you could get your extended warranty refunded and/or transferred. Here is a link that should work to Amazon's return policy http://www.amazon.com/exec/obidos/tg/browse/-/15015711/ref=brbx_c_10/002-3822571-1275267

  • How do I change from photo to video? I tap on it and it doesn't work and I've tried swiping? :-(

    I can't get my iPad to change to video? Any ideas? It won't switch by tapping or swiping...

    Are you sure that swiping up or down on the screen doesn't change the mode? When you swipe up or down, anywhere on the screen, the selected mode will be the one in yellow text.
    If that is not working for you, try closing the camera app and reset your iPad.
    In order to close apps in iOS 7, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Having problems on my iPad with camera after downloading IOS7, will not change from picture to video setting

    After I downloaded IOS7 on my iPad I saw that the camera had changed to video, picture or square.
    It will only take a picture, I will not go to the other two settings.  Any suggestions?

    Its no problem. There are a lof of little things that will take time to discover and sometimes it just easier to ask
    Glad I could help
    -Steven

  • HT204380 I cannot get my iPad to change from audio to video on FaceTime

    Cannot get my I pad off audio face time

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • How to change from FM to AM radio on ipod nano

    how to change from FM to AM radio on ipod nano

    Meryl-elsbeth,
    The iPod Nano only has an FM antenna/receiver. It is not possible to use the AM band on an iPod Nano.

  • Why did frame rate of video shot on iphone 5 change from 30 fps to 24 fps?

    Why did frame rate of video shot on iphone 5 change from 30 fps to 24 fps?

    My understanding (which could be wrong) is that the iPhone shoots video with a variable frame rate. This is likely so it can optimize video for FaceTime. So uncomplicated scenes can be shot with a lower framerate, and active scenes will be shot with a higher framerate.

  • Video frame rate change from video to video

    HI all ,
    when I use labview 2013 I found some strange in acquiring avi video
     when I acquire video from my computer the fps change from video to another one
    some video fps reach 800 fps and other reach 180 fps what is the problem 

    A lower frame rate is actually expected behavior if you are playing video through LabVIEW. This KB explains that LabVIEW analyzes the video one frame at a time and keeps it in the system memory on the CPU.  This can result in slower frame rates during playback. If you would like to simply view video through your front panel, it may be a good idea to embed Windows Media Player in the VI through an ActiveX control.
    -Erik S
    Applications Engineer
    National Instruments

  • How can i change the quality from my buy videos from hd to sd for my ipod ?

    How can i change the quality from my buy videos from hd to sd for my ipod ?
    They hd videos are really big and i havnt enaught save place at my ipod so i only want them in sd at my ipod?
    I know my english is bad but i hope you understand what i mean.
    Thanks for help
    Nelson

    This is done through iTunes on a computer. You plug it in and under the Summary tab, you can chose what type of video quality you prefer.
    You'll choose "Prefer Standard Definition Videos" from the bottom half of the Summary page

  • Premiere CS4. Video-individual images freeze. abrupt change from frame to frame.

    Hi
    I'm working with Adobe Premiere CS4... windows XP prof SP3 4GB RAM. ATI Radeon 38XX Graphic
    my problem is as following: working window: the projection of individual frames in a movie doesn't run smoothly, the change from frame  to frame is abrupt, almost robotic...it also freezes occasionally .. sound is fine though.
    I've reinstalled all recent graphic and sound drivers and also latest updates but the problem is still there...
    Please advice A:S:A:P
    Thanks,
    Elena

    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
    Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
    - click the embedded picture in Harm's message to enlarge to reading size

  • Can I change the view of videos from thumbnails to details or something other than thumbnails?

    I loaded a couple of tv series and movies into my ipad air 2 and when I click on the videos app they all appear as thumbnails. I was wondering if someone could help me change the view to maybe details or something other than thumbnails just so I can view what tv series I have. I couldn't find any option any where on the screen or in settings on changing the view. Please help

    Ok nevermind I managed to sort it out.. had to change the type of video and sort the shows with their seasons. pretty long process.

  • Downloads changing from "Downloading" to "waiting to download". Why?

    Tonight while downloading a HD movie I was watching a couple episodes of a TV show I have on my ATV. Between episodes I would check my download progress and find that the status had changed from "Downloading" to "waiting to download". Can't you watch videos and download something else at the same time?
    I did update a photo library and perform a sync during one of the shows I watched. Does that indefinitely pause a download. The sync took less than one minute.
    I'm glad there are a few people here that know everything about the ATV. Very helpful. Thanks, KMA

    Have you included an href in the jnlp element ?
    are you trying to version the jnlp file too ?
    /dietz

  • I downloaded today 09.19.2013 iOS 7 on my iphone 4 and iPad retina. Unfortunately on the camera app the switch from photo to video does not work neither on iphone nor on ipad. Is it a "youth" bug ?

    I downloaded ios 7 today 09.19.2013 on my iphone 4 and ipad retina 3hrd generation 64g . The switch from photo to video on the camera app does not work neither on iphone nor on ipad. Is it a "youth"bug ?

    Did you try swipe up and down to change?

  • I have a 1st generaltion apple tv which was recently changed from HDMI to component cables to connect to TV; now it will not remember my server password or my apple ID information which has to be re-entered everytime I use apple tv; how can I fix this

    I have a first generation apple TV. recently I have rto change from HDMI input to my TV to a component imput. Now my apple tv will not rememebr my sertver password or apple ID which I have to re-enter everytime I use Apple tv which is annoying; how can I fix this?

    Changing the video connection has nothing to do with the passwords.
    Are you certain it is a 1st Gen ATV?

  • No audio slideshow on output to TV from nano

    I have the Apple Composite AV Cable which I'm using to output from my new Nano (with video) to my TV. For movies it plays the video and sound, but for slideshows I can only see the video (no audio portion) even though I've selected a playlist in the settings for photos. Any suggestions?

    I am having a similar problem. I can play movies and tv shows just fine using the composite cables hooked up to my tv, but when I try to play songs, it does not work.
    I have tried just plugging in the audio cables, but that does not seem to help.
    Additionally, and this is quite strange, if I plug in the video composite cables that are hooked up to my DVD player but keep the ipod audio cables plugged in, I can play songs from the ipod - but only if actually playing a DVD. It defies my understanding.

Maybe you are looking for

  • How can I copy and paste a pdf file from my picture file and paste onto a document?

    How can i copy and paste a pdf file onto a document.  I am trying to place and article onto my Reverbnation Press page.  They only give you the option to either place a url link or paste a document.  There is no uploading for the Press page.  thanks,

  • Urgent help need with WRE54G ver3

    Hi, I need help with this range expander. By some divine miracle I managed to connect my WRE54G to BT router successfully. The main purpose for me buying this product is to get the range to use on my Playstation 3 So, I've got the WRE54G set up to ex

  • Zooming a Finder Window (Clicking Button)

    I am trying to zoom a window in the Finder but I can't make this script work. Basically I have a folder that I open up and I want to resize the window to fit the contents (just like hitting the Green button on a window in the Finder). I get an error

  • What Does It Actually Mean to "Buy" an Apple TV Movie?

    Have searched but can't find the answer to the following: When I "buy" a movie via Apple TV, what happens to my "ownership" of that movie in the future? If I have to replace the original Apple TV device? If I get rid of Apple TV, then later buy anoth

  • Creating a Transition Template for FCPX

    So I am familiar with FCPX and editing, however I am still working on developing my skills in animated graphics. I found a great transition I want to brand my videos with but it is saved as a After Effects Project. Upon opening it AE just has transpa