Change GL a/c assignment /4me,/4mh,/4mt & /4mein table

Dear Experts,
My clients want to change the GL a/c assignment of Technical WT /4me, /4mh, /4mt and /4me to another separate GL a/c.
Is it possible to change the technical wage type GL a/c assignment? To defined GL a/c.
Please kindly resolve my issue. Thanks in advance.
Thanks & Regards
Ratan

HI All,
Issue has been resolved,
We have raised OSS for this isssue reply as below.
Regarding your quey, /4M* wagetype are not ment to be posted. only
wagetype /460 needs to be posted.
/4M* wagetype are only for the reporting purpose
Thanks & Regards
Ratan

Similar Messages

  • How to fetch the amounts /460,/4MT,/4ME,/4MH and /470 in custmoized report

    Deae Experts,
    we are developing a customized report on TDS for a particular month.
    For this we need to extract the amounts of /460,/4MT,/4ME,/4MH and /470 wagetypes.
    How and where we have to  extract/fetch  the  amounts to have these  values in the customized report.
    Please advice.
    Regards,
    Vi Sai

    Hi Experts,
    I want to extract the above details after payroll posting to accounts.
    I have tried to have the details form PCP0,there i can only view the /460 details.But the rest of details i can able to see.
    Where shall and from which trasaction code(Any Finance trasaction code) we extract the amounts of  /460,/4MT,/4ME,/4MH and /470 for the employees.
    Please advice.
    Regards,
    V sai.

  • Change of additional acct. assignment in automatically created line items

    Hello,
    How can we change the additional account assignment of automatically created line items in transaction MIRO. In my case the tax line item is created automatically in MIRO.
    I am able to change the account assignment of consumption line item. But not Tax line item.
    Best Regards,
    Tapan

    But FBZP is for APP not for Tax line item. Is it possible to change the additional account assignement (from cost center to internal order) in tax line item in MIRO.
    Best Regards,
    Tapan

  • I am working in Numbers and can't seem to change the generic value assigned to the legend.  Any advice on how to select the legend and save new values?

    I am working in Numbers and can't seem to change the generic value assigned to the legend.  Any advice on how to select the legend and save new values?

    Ntenich,
    If your table has a Header and your Legend text is in the header, it will be picked up by the table.
    Jerry

  • Change the status profile assigned to the line item from PROFA TO PROFB

    Hi Experts,
    The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
    Item Category A -> Status Profile PROFA
    Item Category B -> Status Profile PROFB
    For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B.  However the status profile still remains PROFA.
    We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
    any quick inputs from any one please......
    Thanks in advance
    hemanth

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • How to change company code in Assignment tab (CJ20n-project builder)

    Dear All,
    Is there any config to maintain company code in assignment tab (project builder) ? We have a problem in our project. It shows that in basic data, user put company code A (in basic data) but in Assignment tab they put different company code let say B. When we do settlement , two accounting document created to company code A and B. By right it should be only company code A. In addition, we cannot change the company code, when the status is already Release (REL).
    Please help how to change the company code B to A and how to reverse the accounting document that has been created under these two accounting document.
    Thank you.
    Best Regards,
    nies

    Now I understand your scenario, you have the Requesting Company Code and the Company Code Different.
    You usually use this primarily with IM module if you want to manage the asset under construction (cross company) belonging to a different i.e., company code (Requesting ) than company code on main WBS.
    You can not change the company code (Assignment Tab) as you already have actual posted against it.
    You've also created an AUC (in wrong company code) and even if you reverse the settlement you would not be allowed to delete the AUC or the delete the settlement rule (its grey out as its already used)
    What I can suggest is to reverse the settlement, lock this WBS which was created wrongly, create a new WBS and then continue with you regular process.
    Above are my views but you can expect views from others.
    Regards
    Sreenivas
    Please close the post if satisfied.

  • WBS element changed into an account assignment element

    Hi Gurus,
    Please let me know that how to get WBS element changed into an account assignment element.
    regards
    mohan

    In what releation? For depreciation costs?

  • Changes to Profit center assigned to cost center

    Hi
    We have a scnario in which the profit center assigned to the cost center master has to be changed. We have been advised also to  change the validity period of the same from the date of change of the profit center .However, the cost center has been used to for some data postings with the old profit center maintained in the cost center master. Now my query is:
    1. What is the impact of changing the profit center in cost center master? In our case, some data has been posted to the cost center when the old profit center was maintained.
    2. Why should we change the validity period of the cost center after changing the profit center assigned to the cost center?
    3. Also, what is the way to transfer the entries which have been posted to the old profit center to the new profit center?
    Regards
    Sanil Bhandari

    hi,
    1) The impact of profit center is more in the cost center. when ever we assign profit center to cost center. the cost will be updated automatically. so there is no direct posting in profit center only statstical posting are generated.
    2) second one when we want to create profit center first chek it out profit center valid and upto. if same is not maintained in creation of cost center . so u must have to change the validity periods
    3) i am not sure this one i thing 7KEH OR 1KEF TC is there any way tommorow i will give the answer this questions.
          if my answers are wrong plz correct and replay to my id [email protected]
    thank you

  • How to change of Messge classe assigned to Call point?

    Dear friends
    I have defined one validation, in line item call point - 2, I have defined one message class. Now I want to change the message class assigned to call point 2 ie. line item.
    Please help me how to change the message class.
    Thanks in advance.
    Regards
    Kiran A

    hi
    Message class cannot be changed ... As message class is for one particular submodule
    eg: message class for account receivable /account payable
    message class for asset accounting.
    So if you have created a validation you might have created for account receivable so message class for account receivable would be displayed by default you cannot change it to message class for asset accouting . you have option for changing message no but not message class.

  • Stop PR change once it is assigned to PO

    Dear gurus,
    how to stop PR from being amended once it has been assigned to PO.
    scenario is concirned department  have created one PR for procurement of 500 lts of paint. We created PO and send to vendor.
    Now we relised that the requisition changed to 0.5 lts.  unfortunately we have never been informed about this change and we still have the high quantities on order.
    So please help how we can stop PR change, once it is assigned to PO, or if any change was made by required department, we(procurement department) came to know that there is any change in PR
    regards
    Vb
    Edited by: vikrant1811 on Aug 7, 2011 7:52 AM

    Hi,
    If your PRsu2019 are subject to release strategy once they are fully approved you can prevent changing by setting field selection key under release indicator activity (Materials Management-Purchasing-Purchase Requisition-Release Procedure-Procedure with Classification-Set Up Procedure with Classification-Release indicator) where all fields would be in display mode.
    Otherwise you need to develop some coding in BADI ME_REQ_APPROVAL or ME_PROCESS_REQ_CUST

  • Change multiprovider which is assigned to aggregation level

    Hi guys,
    is there a easy way to change multiprovider which is assigned to aggregation level?
    We have already some queries, filters and functions on the aggregation level. So we cant simply delete it and create another one. I just want to change multiprovider definition under the aggregation level as we decided to change naming convention for multiproviders.
    Thanks in advance.
    Zafer

    Hi,
    Aggregation levels are built on top of specific multiprovider. And you can not change the technical name of multiprovider.
    But you can try following approach,
    1) Create copy of current multiprovider, and then create aggregation level on top of that multiprovider.
    2) Now try to copy the queries from source aggregation level to target using 'RSZC' transaction.
    I am not sure whether this will work or not, but you can just give a try.
    Regards,
    Durgesh.

  • Change of Cost Center Assignment for Organization Unit in HR

    Hi,
    Recently my client is changing their cost center number from 6char to 5 char format. I have created customized mapping table to link between old cost center number and new ones.
    Create new cost center referencing to old cost center is done too.
    However, for each Personnel Number, i need to change the cost center assignment which link to org unit. I have done this too manually at t-code PPOM. How can I do this for mass change? I have a list of org unit number with me. Is there any standard program to do this or i should use LSMW ?
    How do I make sure for each Personnel number, their cost center assignment will change to new 5 char format in the end as required?
    I am new to HR module.
    Thank you for your help.

    Hi,
    As Sikandar said, you will have to write an LSMW or BDC ( where in you can check and validate the input Cost centers) using PP01 or Po10.
    Also I think if you use BDC or LSMW you will have to run the RHINTE30 report. Check the documentation on RHINTEXX reports to get better idea.
    Cheers..
    Ajay

  • Is it possible to change the cost centre assigned to profit centre?

    hi all ,
    We have a requirement to change the old profit centre which was assigned to cost centre , with the new profit centre ... is it possible ? ... is there any problem in doing so ?... what will be the effect of this ? ...
    thank u ... in advance

    Hi,
    u can only change the cost center assigned to profit center before any document posting,
    If even single document is posted or any other postings has done then u cannot change it.
    Regards,
    Pavan.

  • Just got my ipod stolen and now I have changed all my passwords assigned to that ipod, can the person who stole it see my updated emails?

    Just got my ipod stolen and now I have changed all my passwords assigned to that ipod, can the person who stole it still see my updated emails and also can they see my facebook, although I changed the password to that too.

    If you changed your facebook password they will not be able to login to your Facebook account.
    Of course, other Facebook users may be able to see some of Facebook information depending upon how you have your privacy settings configured.

  • Activation error while changing the data type of a field of a table

    hi friends,
    i am facing one problem while changing a data type of a field of a table.
    i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
      while changing to NUMC data type activation error is comming as below.
    Table is not yet classified                           
    Field ZTOTAL_COUNT: Type change                       
      ALTER TABLE is not possible                         
    Structure change at field level (convert table YQM32) 
    Check on table YQM32 resulted in errors   
    Table YQM32 could not be activated                       
    (E- Structure change at field level (convert table YQM32)
    plz suggest.i need to change the data type from char to numc.
    Thanks & Regards

    Hi Pabitra......
    From the SE11 change the table as u wanted and then from menubar select
    UTILITIES--> DATABASE UTILITY
    It will open database utility
    there u select the Activate and adjust database button.
    then the database table will get adjusted.
    just try it once.........
    Suresh......

Maybe you are looking for