Change grid size together with the paths sticking to it

Hi! This is my first question in the Adobe forums!
I have made a simple score in my own music notation with the help of the grid in AI CS7. However, I set the wrong page size and now I have to everything over again. My question is: Can I fit thwe whole thing on an art board with a smaller size along with the grid? I want to keep everything but the size of the art board. So how do I change the grid ALONG with the objects and lines that are "stuck" to it? I hope my question is clear. Let me know if it isnt and I will clarify.

I think I fixed it. I will try later today to set the grid size the same as the width of the page and subdivide it this way. It would solve it if I could SET the artboard width to be anything: 1cm, 30cm, 100000 cm without changing the size of it.
-Joakim
Den 9. juni 2014 kl. 23:47 skrev Jacob Bugge <[email protected]>:
change grid size together with the paths sticking to it
created by Jacob Bugge in Illustrator - View the full discussion
Joakim,
As mentioned, the grid is a rather fluid thing, if it is the one I presume so you cannot rely on it for alignment and the like.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6445830#6445830
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Similar Messages

How can I create a client console and work together with the Cache Server?

How can I edit the following Cache-Server.cmd file to create a client console and work together with the Cache Server?
The following is the cache server file: contacts-cache-server.cmd
@echo off
setlocal
if (%COHERENCE_HOME%)==() (
set COHERENCE_HOME=c:\coherence
set CONFIG=C:\home\oracle\coherence\Contacts
set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\
coherence\Contacts;C:\home\oracle\coherence\Contacts\classes;
set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
:exitEdited by: junez on 23-Oct-2009 09:20

Hi
To run the console, change DefaultCacheServer to CacheFactory
Paul

Can i change my old iPad with the new one, i Will pay the difference... Do you have this kind of program?

Can i change my old iPad with the new one, i Will pay the difference... Do you have this kind of program?

If you are past the return date, you can sell the older iPad and put the money towards a new one.
Plus, old iPads make great gifts ! ! !

HT5219 I have a macbook air (mid 2012) and a thunderbolt display. Do I absolutely need to connect the power supply together with the thunderbolt cable ? I found that the screen won't wake up if only the thunderbolt connection is plugged.

I have a macbook air (mid 2012) and a thunderbolt display (27'').
Do I absolutely need to connect the power supply together with the thunderbolt cable ?
I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?

I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
Good luck,
Clinton

My iphone doesnt want to start.all it shows is the apple icon.nothing more.i have tried holding the home button together with the lock button.what can i do .thanks

my iphone 4 doesnt want to start . all it shows is the apple icon.i have tried holding the home button together with the lock button. nothing seems to work . please help.

Plug the iPhone in with the Wall Charger. Then while plugged in do the Reset again, hold both Home and Power buttons until the iPhone Restarts. This usually begins to happen in less than 20 seconds time.
If you this does not work you can try to Restore the Firmware on your iPhone. If you decide to do this, connect your iPhone to your computer with iTunes open. Hold both the Home and Power buttons until the iPhone is detected by iTunes in Recovery Mode, this takes about 20 seconds time. Restore your iPhone.
If this does not work, you can try to Restore the Firmware on your iPhone in DFU Mode. Connect your iPhone to your computer with iTunes open. Hold both Home and Power buttons for exactly 10 seconds, release the Power Button and keep holding the Home Button until iTunes recognizes the iPhone in Recovery Mode, about 20 seconds more time. Restore the iPhone.
If this does not work and you have Warranty or AppleCare Coverage take your iPhone to Apple for resolution of the problem.

Problems with the path

Hi
1. I am using WSAD 5.0
2. I have created a web project it has the following directory struture
Java Source
MyFile.java // This file needs to access the xml in MyData
Web Content
// MyData contains few xml and js files
MyData // POSITION 1
META-INF
WEB-INF
classes
lib
MyData // POSITION 2
MyShow.jsp
3. In the buildpath the source is set to Java Source
**Question 1: Which is the correct POSITION of the Folder 'MyData'?
1. Assuming the folder is placed in POSTION 1
Java file
-- What would be correct relative path access the xml file in MyData
(i tried ../Web Content/MyData/abc.xml,
./Web Content/MyData/abc.xml and
/Web Content/MyData/abc.xml but NOTHING worked)

Jsp file
I am ABLE to access the javascript files with path /MyData/abc.js
2. Assuming the folder is placed in POSTION 2
Java file
-- I am ABLE to acces the xml file with the path /MyData/abc.xml
Jsp file
-- The file is NOT ABLE to access the path /WEB-INF/MyData/abc.js (WSAD automatically also creates the same path)
**Question 2: Depending on the position of folder how would i access MyData from JSP or Java file
-- One more important thing is that in WSAD 5.1 the folder created is 'WebContent' instead of 'Web Content' <without space>, Does it has any thing to do with it?
Any help would be highly appreciated, any links which would give my insight on this will also be of immense help
regards
Tarun Dhillon

I am not sure i understand your problem, however you need to arrange your directories so that they are in a logical order from the context root for your application
for Websphere Developer questions, you should probably try an websphere newsgroup as well.

Can .air installer some files together with the application?

I have an installer.air that is created by Adobe Flash. I have another file called settings.cfg which is needed for my application to run. How do let the computer auto install settings.cfg into the installation directory together with the application when i run installer.air? Currently, I need to manually place the settings.cfg into the application installed directory.

YAY Thanks, kglad.

My mac is running 10.7.2 and wondering why the "find my mac" feature is not working. Instead, it says I need to system upgrade requires.. I believe it's already upgraded together with the 10.7.2

My mac is running 10.7.2 and wondering why the "find my mac" feature is not working. Instead, it says I need to system upgrade requires.. I believe it's already upgraded together with the 10.7.2

i get the spinning beach ball in all of my applications
have a look at this article: Troubleshoot the spinning beach ball

Grid is coming with the row having editable field

hello,
I ahve to display OO ALV grid after checking a check box in selection screen , after selecting a row and pressing on edit button in application tool bar it has to give edit option for a field in the row which user has selected, after pressing save button (pop up for confirmation has been given here )data has to get update in ztable and the same has to be reflected in the current grid ...... TILL HERE EVERY THING IS WORKING FINE.
If the user selects particular record and press the EDIT button, ( assume he didn't edited any thing and he didn't press the save button also ) immediately if he presses the BACK button it should go to selection screen ( this part is working) again if he presses execute button in selection screen ---> grid is coming with the row having editable field (WHICH I DONT WANT).

Hi,
You can code as below...
WHEN 'BACK3'.
perform check_save_BEFORE.
"refresh the internal tables used for Selection process and display and also refresh the internal tables used in methods.
LEAVE TO SCREEN 0..
Try it.
Thanks
Arbind

I am using MacBook Pro and running 10.8.4. iTunes version 11.0.4. Several of the cd's i have imported recently have been split into multiple albums by ITunes. How do I bring all the bonus tracks together with the original album?

I am using a MacBook Pro and running 10.8.4. iTunes version 11.0.4. Several of the cd's i have imported recently have been split into multiple albums by iTunes where it has identified bonus tracks. How do I bring all the bonus tracks together with the original album?

Hello there, Fineshot.
The following Knowledge Base article might provide some information that should help you resolve the issue you're having:
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

When I'm travelling I import photos onto my laptop's external hard drive and work on the images using virtual copies to develop them. When I get home, I want to import all the photos together with the developed virtual copies fromt the laptop's external H

When I'm travelling I import photos onto my laptop's external hard drive and work on the images using virtual copies to develop them. When I get home, I want to import all the photos together with the developed virtual copies fromt the laptop's external HD into LR5 on my PC desktop. But if I use the import button in LR I only get the original photo, not the developed copies. What am I doing wrong?

Since your current editing workflow is based around Virtual Copies there are no actual files containing the edit data. Therefore, you'll need to use the 'Import from another catalog' option ( see File menu).

Logo with percent size compared with the image

Hello everyone
I want to ask if there is any way to make a script that place a logo AND the size of that logo has a specific percent size (lets say 10%)
compared with the one of the two axis of the image (lets say according to the image height).
This is because I use to crop and reframe my photos. At the end of the edit I run my logo batch and of course every logo has different size
compared with the size of the photo…
Thank you all

I want to ask if there is any way to make a script that place a logo AND the size of that logo has a specific percent size (lets say 10%) compared with the one of the two axis of the image (lets say according to the image height).
Yes.
What is giving you problems?

I have a macbook 2011 and its booting to the apple with a loading bar. it gets halfway and changes to a screen with the apple and a spinning circle. It spins untill it dies. will not boot to safe mode. Do not have orriginal osx disk either.... HELP :(

i have a macbook 2011 and its booting to the apple with a loading bar. it gets halfway and changes to a screen with the apple and a spinning circle. It spins untill it dies. will not boot to safe mode. Do not have orriginal osx disk either.... HELP

It happened after an update

Read a csv file in a PL/SQL routine with the path as a parameter

hello oracle community,
System Windows 2008, Oracle 11.1 Database
I have created a directory in the database and there is no problem to read a csv file from there. Since the files can be at different places, my java developer is asking me, if he can give me the path of the file as a parameter. So far I know I will need a directory to open the file with the UTL_FILE package, but I cannot create diretories for folders, that will be created in the future. Is there any way to solve that problem, so I can use the path as a parameter in my routine ?
Ikrischer

BluShadow wrote:
Ikrischer wrote:
as I said before, they are dynamic. As usal to most other companies, you get new partners and you will lose partners, so new folders will be added, old ones will be deleted. if you use different directories for different folders, you have more work to handle them.I wouldn't call that dynamic, I would call that business maintenance. Dynamic would mean that the same company is putting their files into different folders each time or on a regular basis. If it's one folder per company then that's not dynamic.the folder structure is changing, I call that dynamic, does not look static to me. but thats just a point of view, it is not important how we call it. lets just agree, the folder structure will change in the future, no matter how many folders one partner will have.
BluShadow wrote:
So you're receiving files and you don't even know the format of them? Some of them are not "correct"? Specify that the company must provide the files in the correct format or they will be rejected.
Computers work on known logic in most cases, not some random guessing game.we know the correct format, but we also know, that the partner wont always send the correct format, period. Cause of that we want to deliver an error log, record 11,15 and 20 is wrong cause of....that is a very usefull service.
BluShadow wrote:
The folders should be known.impossible, we do not know the future.
BluShadow wrote:
The file format should be known.see above, it has a fixed format, but thats not a gurantee you get the correct format. for me thats a normal situation, it happens every day, you have fixed rules and they will be broken.
BluShadow wrote:
The moment you allow external forces to start specifying things how they want it then you're shooting yourself in the foot. That's not good design and not good business practice.maybe we are talking about different things, we do not allow to load data into our system with a wrong format. but we do allow to to send us a wrong format, and even more, we do allow them to send wrong content, but still we dont load it into our system. format and content must be correct to be loaded in the real system, but both we are checking. and with external tables you cannot check a wrong format we a detailed error log.
Ikrischer

Easiest way to change font size/color with CSS?

I've never used CSS before; I need to know how to change the font size and color using CSS, since it seems to be the only way to do it now. Sometimes I just need to change the font just for a few words, or a line here and there. Not necessarily page-wide, you understand. Is there a step-by-step process showing the simplest way to accomplish this? I'm not a web developer or professional designer, nor do I want to be. I just use DW to build simple web sites for personal use. I don't build using HTML - I solely use DM's GUI functions. And I'm also trying to teach my nine year-old how to start out page-building. I certainly hope that something as simple as changing font size doesn't require one to buy a book to learn HTML, which seems to be what a lot of people are telling me. Thanks for any assistance.

Easiest is not always the best way. You must learn the fundamentals.
CSS
/**this styles all paragraphs in your site**/
p {
font-size: 18px;
color: #000;
/**This is a class. Classes are re-usable**/
.red {
color:red;
font-weight:bold;
HTML:
This is a normal paragraph
This is a red paragraph
This is a normal paragraph with some red text here but not here.
If you're going to teach your 9yr old how to build web pages, start with the links below.
There's no point in teaching your child bad habits that will have to be unlearned later.
http://www.html.net/
http://w3schools.com/
http://www.csstutorial.net/
http://phrogz.net/css/HowToDevelopWithCSS.html
Nancy O.

Change grid size together with the paths sticking to it

Similar Messages

Maybe you are looking for