Change group of materials

Hi,
I've changed the material group of one of my materials to a material group I've just created. It hasn't returned any mistake but, when I see the stock of the new material group the stock hasn't been assigned to this group. I mean, it seems like it the material wouldn't have changed of material group.
Can anybody tell if I must change something more in this material?
Thanks in advance.
Regards.

HI,
SAP captures statistics data based on material group and has several reports in information system for material group.
If the material master is changed, then those statistics will not change. As a change effects only data created after a change.
So check how the stock was put i.e with what group.
Below are few points- impact of changing the material group
1. Change the material group will lead the confusion in the Reports (Old and New mtl grp in std and customized report)
2.If the PR release Strategy is based on material group, then you need to change the classification with the new material Group,, If there is any open Release- release it fully before you do change here
3. All the PO/PR/Outling agreements will not get update automatically,, Have to do manually
4. As far as stock Material is concerned there is no impact on Finance side.
5.Any material group contracts will be affected
http://forums.sdn.sap.com/thread.jspa?messageID=10115238#10115238
Edited by: ayyallas on Feb 13, 2012 4:44 PM

Similar Messages

Shipping point not defaulting loading group for materials

Hello all,
I would like to know how to set up a particular shipping point defaulting to particular loading group for certain group of materials. would this change has to be done manually in the material master or is there any customizing changes that has to be done for this change.
Thanks,
Maxx

Maxx,
This sounds like standatd Shipping Point Determination.
1. Create a Loading group for your material
> Logistics Execution > Shipping > Basic Shipping Functions > Shipping Point and Goods Receiving Point Determination > Define Loading Groups
2 Assign that new Loading Group to your material(s)
> Tcode MM01, MM02
3. Assign combination of Shipping condition, Loading Group, Plant, & the desired Shipping Point
> Logistics Execution > Shipping > Shipping Point and Goods Receiving Point Determination > Assign Shipping Points

Unable to change group text name or add person to some group texts in iOS 8

I really like the ability to change group text names as it helps me separate work group texts from personal especially when I have coworkers that have separate business phones. I'm unable to change the name of some group texts as the option is not there when I go into details. I'm also unable to add contact to the same group texts that I'm unable to change the name on. Is this a glitch or am I missing something?

Hi CaliWingsFan,
If you are having issues with renaming and adding users to group texts, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

Transaction code to change group indicator & group number of a routine

Transaction code to change group indicator & group number of a routine

Post Author: paul.carpenter
CA Forum: Formula
Sorry for the ignorance. I did a little more playing, created a group summary count, then checked it against my record count per group.
All set now!

Pricing on the basis of specific group of materials by cumulating values

Dear SAP Gurus,
There is a requirement to cumulate the values of a certain group of material AND provide discount on the basis of that on the sales order.For example ,
group 1 =mat A mat B if 1000 give 5%
group 2 =mat c mat D if 2000 give 10%
So at sales order
mat A 1000
mat B 500
mat C 400
In this situation ,group 1should be activated only and discount should be given and distrbuted on A and B.What will be the method and condition type for this situation.
Regards,
Sam Ahmed

This is part of standard SAP pricing functionality.
In V/06 check K029.
Important fields to be activated are -
In V/06, for your cond type
Group condition
Scale basis
Create Material pricing gr. = G1
and give it in MMR, MM02, Tab Sales: Sales Org 2, field "Material pricing group" in Materials A, B
Then create the cond record in VK11 for your cond type (e.g. K029) with scales.
If all settings are correct, then for sales order
Mat A shall get discount
Mat B shall get discount
Mat C shall NOT get discount

Grouping of Materials

Is it possible to to assign one new material number for a group of materials?
I need to group these materials (example: matl1, matl2, matl3) so that I can use it for promotional sale and it should have just one price. Each material has its own material number and can be sold separately.
Please guide me.

Hi Anwar,
It is possible to group few materials into one group,in material master basic data 1 tab you can find material group here you assign the group no,once you assign this no to few materials those materials are comes under that group.For giving the price for this material group you need to select material group apart from your other org elements from field cataloger while crating the condition table.In VK11 you will maintain the price for the material group so that the price will applies to all materials which comes under the material group.
You can create your own material group by the T.code OMSF.
Thanks
Ram

How to change group colors

How to change group color in ical

To change group colors:
highlight 'desired' group,
under <Edit>, choose <Get Info>,
this should give you a smaller window:
          'desired' Info
          Name: desired                    Box with color choices
                                                   (dropdown colors; 'other' accesses other color palettes)
          Description: (can be added)
          Box ' Ignore alarms'
          'Publish...'                    'Cancel'                    'OK'
   4. make color choice,
   5. choose <OK> to complete color change, or <Cancel> original color remains.
I do hope I've gotten this correct.

Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?

Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?

Hi
"Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work"
If I've understood you correctly I've never known this or anything else to take that long? What were you trying to do exactly?
"Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behaviour?"
http://support.apple.com/kb/HT1822
HTH?
Tony

How to change Group membership

As number of VM servers we are using grows we would like to organize them into groups to simplify management (e.g. business critical, internal, test, ...).
We are aware we can change group name (membership) using "Deploy" option. This however requires to shutdown VM, re-deploy (copy) and remove the old one.
Is there more feasible option?
Do I need to use Oracle Grid Control for this ?
Thanks
Honza

Honza wrote:
Is there more feasible option? Not at the moment, no.
Do I need to use Oracle Grid Control for this ?Grid Control's VM Management Pack actually doesn't have the same group functionality that Oracle VM Manager does. If you do want to split your VMs into groups, you will have to stick to using Oracle VM Manager.

Change group of user in solaris

i have a doubt as to how to change group of a user in solaris. I want to change the group of the user. Please, do the needful.
regards

For Oracle specific questions you can try Database forum, for OS specific ones I already addressed you Create user in solaris, and Sun has its own site as well (http://www.sun.com).

BOM reports using a group of Materials

Hi all
I am looking at standard SAP BOM reports CS11, CS12, CS13. All of them require that I enter a Material number. Do we have standard reports where we can look at BOM using a generic group of materials example where multiple selection of materials is allowed, or selecting BOMs using for all materials belonging to a material group etc.
thanks a lot

Hi John,
There are no Standard reports available for BOM.
You may consider creating a query or an ABAP report.
If you are planning to develop a report you may use the Function module CSAP_MAT_BOM_READ which will list the BOM for a material in Internal tables
Regards,
Jayakandan

How do you Change Group Sort Direction using Report Client

It looks like there should be a sort direction property on the ISCRGroupOptions object but there is none. So how do you set the sort direction of the group?

I tried that and it did not work. Here's the code to change the grouping, note I also change the associated sort object. I did notice that if you go into the crystal reports designer and bring up the Record Sort Export and select the group's corresponding sort that the Sort Direction radio buttons are disabled. The question is how to change the sort direction shown on the Change Group Options dialog?
        public bool GroupModify(short GroupIndex, string TableName, string ColumnName, SortDirection SortDirection)
            bool result = false;
            if ((_ReportClient != null) && (GroupIndex >= 0) && (GroupIndex < this.GroupCount()))
                CrystalDecisions.CrystalReports.Engine.Group docGroup = _ReportDocument.DataDefinition.Groups[GroupIndex];
                ISCRField field = _ReportClient.DataDefController.FindFieldByFormulaForm(docGroup.ConditionField.FormulaName);
                if (field != null)
                    Group group = _ReportClient.DataDefController.GroupController.FindGroup(field);
                    if (group != null)
                        Group newGroup = group.Clone();
                        newGroup.ConditionField = FieldGet(TableName, ColumnName);
                        if ((newGroup.ConditionField != null) && (_ReportClient.DataDefController.GroupController.CanGroupOn(newGroup.ConditionField)))
                            _ReportClient.DataDefController.GroupController.Modify(group, newGroup);
                            result = this.SortSet(TableName, ColumnName, SortDirection);
            return result;
        public bool SortSet(string TableName, string ColumnName, SortDirection SortDirection)
            bool successful = false;
            if (_ReportClient != null)
                ISCRField field = FieldGet(TableName, ColumnName);
                if (field != null)
                    ISCRSort sort = _ReportClient.DataDefController.SortController.FindSort(field);
                    if (sort != null)
                        _ReportClient.DataDefController.SortController.ModifySortDirection(sort, CRSortDirection(SortDirection));
            return successful;
        public int GroupCount()
            int count;
            if (_ReportClient != null)
                count = _ReportClient.DataDefController.DataDefinition.Groups.Count;
            else
                count = 0;
            return count;

Retive the changes done for materials in perticulare plant

Hi Friends,
i want to pull the changes done for materials in perticular plant
for specific USER in a view.
mean .. what the USER was changed for that meterials in plant.
regards,

Hi,
Use CDHDR and CDPOS table.
Thanks,
Sen

How can I dynamically change group field column?

Hello!
I need to group data and create group totals for that table. Is
it possible to dynamically change group field column for
specific table, depending on data retreived from parameter form?
Thanks,
Mario.

quote:
Originally posted by:
ljonny18
Hi,
I am using a grid within a component in my Flex application.
I have an XML dataProvider, and I want to change the row
colour of my Grid depending on a value coming form my dataProvider
– but I cant seem to get this to work :(
can anyone help / advise me on how I can dynamically change the
colour of my grid row depending on a value coming from my XML
DataProvider????
Thanks,
Jon.
Hi,
a few hours ago I stumbled across this cookbook entry - it
didn't solve MY problem, but maybe it provides a way to solve your
problem?
http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=61&product Id=2&loc=en_US
From the article:
quote:
Changing the background color of a DataGrid cell is not as
simple as changing some style because the default renderer for a
DataGrid cell does not have a backgroundColor. Therefore, to do
this simple task, you have to create a custom itemRenderer where
you draw your own background in the updateDisplayList function.
HTH
Uwe

Changing group bt code

dear all
i need to know if there is way to change the group selection for the report
so i can build my report dynamically
iam using cr 7 and vb6
please if any one know any way to change the group field by coding
please advice

Hi, I did not worked on VB.
But you can certainly get help from following link.
It talks about changing group condition field dynamically in .Net (I guess VB).
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333233323334%7D.do|changegroup]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333233323334%7D.do
--Kuldeep

Change group of materials

Similar Messages

Maybe you are looking for