Change group of user in solaris
i have a doubt as to how to change group of a user in solaris. I want to change the group of the user. Please, do the needful.
regards
For Oracle specific questions you can try Database forum, for OS specific ones I already addressed you Create user in solaris, and Sun has its own site as well (http://www.sun.com).
Similar Messages
-
Changing permission on "Everyone" group on "Users" folder to "No Access"
Hello Everyone,
I need help on changing permission on "Everyone" group on "Users" folder to "No Access" using a Terminal command line.
What i'm trying to do is assign "Everyone" group to "No Access" on "User" folder to restrict other users from going to users home folder on the computer.
Right now, when a user login he/she has the ability to view files that are not located in the documents folder
PS
Network is configured for OD/AD, home folder is located on Dell Server
Appreciate the help, Thanks very muchYou are running Oracle Linux and want to use a network volume provided by Windows 2008 to install Oracle Database.
Your problem is that you cannot set appropriate privileges on the mounted volume to perform the installation.
Is this correct?
If yes, then as far as I know, Windows file sharing is not support, even if you fix the permission issues. Your problem is the file system, which won't be Linux ext3. NFS might be supported, but I think it is not the best idea. Have you looked into iSCSI? It will allow you to mount remote disks using SCSI protocol. You could do pretty much everything with such a mounted disk that you can do with a locally attached drive, including initializing, but instead of using the local bus, it will use the TCP/IP network.
How to setup iSCSI on Windows Server 2008 (storage server)
http://technet.microsoft.com/en-us/edge/Video/ff710316
CentOS / Red Hat Linux: Install and manage iSCSI Volume
http://www.cyberciti.biz/tips/rhel-centos-fedora-linux-iscsi-howto.html
Edited by: Dude on Jun 23, 2011 12:08 PM -
[SOLVED] Problems changing primary group for user
Hello,
I used the following command to add a new user
# sudo useradd -m -g users -G audio,lp,optical,storage,video,wheel,games,power,scanner -s /bin/bash mel
I think did
#cat /etc/group
and everything looked like it should apart from the user mel was not on the users group line
e.g.
storage:x:95:john,mel
scanner:x:96:john,mel
power:x:98:john,mel
nobody:x:99:
users:x:100:john
so I tried
# sudo usermod -g users mel
still no effect
is this normal?
Last edited by mrLogan (2012-04-05 08:36:32)Gcool wrote:Try using "adduser" (interactive version) instead and see if the behaviour remains the same.
I used
#sudo userdel -r mel
to remove the account
and then used
#sudo adduser
and went through the prompts
by default it wanted to add the users group as primary and I accepted it
everything went fine , no errors but yet again the
cat /etc/group shows
storage:x:95:john,mel
scanner:x:96:john,mel
power:x:98:john,mel
nobody:x:99:
users:x:100:john
dbus:x:81:
interestingly if I do
#sudo id mel
I get
uid=1001(mel) gid=100(users) groups=100(users),7(lp),10(wheel),50(games),91(video),92(audio),93(optical),95(storage),96(scanner),98(power)
I am officially freaked ! -
Unable to change group text name or add person to some group texts in iOS 8
I really like the ability to change group text names as it helps me separate work group texts from personal especially when I have coworkers that have separate business phones. I'm unable to change the name of some group texts as the option is not there when I go into details. I'm also unable to add contact to the same group texts that I'm unable to change the name on. Is this a glitch or am I missing something?
Hi CaliWingsFan,
If you are having issues with renaming and adding users to group texts, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L -
Group Policy - User Rights Assignments not taking effect on workstation`
Novell 5.1 SP7. ZenWorks 3.2 sp3. Windows XP Pro workstations.
In Group Policy, (Computer Configuration/Windows Settings/Security
Settings/Local Policies/User Rights Assignment), I have added Power Users to
the "Load and Unload device drivers" policy. However this setting is not
taking effect on my Windows XP workstations. My DLU policy for users is
configured to have the users members of the "Users" and "Power Users" groups
on the local PC.
Other parts of Group Policy (Computer Policy/Administrative Templates) are
taking effect on the workstation, so I'm wondering if the problem I am
having is related to Security Settings only.
I enabled Group Policy logging on the Windows XP workstation and include it
below:
WMHelperInitialization (Mar 4 2004) called! Flags: 0x8001002. Event:
0x1000. Impersonation: 0x2
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x204
WMHelperSystemEntryEx called!
Entered GPCleanupEntry
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Persist Workstation settings from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Persist
Workstation settings not found. Assuming 0
Error 2 reading Persist Workstation settings
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Warning: C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini does not exist
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy Machine Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy Machine Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
Renamed Administrator account: Administrator
Local Administrator's user name = Administrator
Administrator account names match, skipping.
Renamed Guest account: Guest
Local Guest's user name = Guest
Guest account names match, skipping.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
GPCleanupEntry releasing mutex.
Exiting GPCleanupEntry: 0
Exiting WMHelperSystemEntryEx ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x0. Event: 0x0.
Impersonation: 0x0
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache .
No workstation. Exiting CheckForObsoleteWksCache
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x0 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Entering ApplyPolicies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Flags: 0x80000070
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Impersonating logged on user.
Context : OU=Users.OU=Newcastle.O=OSG
Full Object DN CN=wintest3.OU=Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=wintest3.OU=Users.OU=Newcastle.O=OSG, WINNT Workstation Package,
zenwmGroupPolicy, 512, pBuffer)
Reverting to system impersonation.
Found DN CN=XP User Package:WinNT-2000-XP:Windows Group Policy.OU=Policy
Packages.OU=Newcastle.O=OSG
WMCheckIfGroupPolicyObjectsChanged entered
Impersonating logged on user.
Reverting to system impersonation.
Group Policy object has NOT changed!
Exiting WMCheckIfGroupPolicyObjectsChanged 0x0
Entered ScheduleCleanup.
Loaded wmschapi.dll
Calling WMScheduleAction
Finished Calling WMScheduleAction. Returned 0x0
Exiting ScheduleCleanup 0x0
Entered BackupOriginalGP.
No backup exists. Creating one: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Backing up original GP to C:\WINDOWS\System32\GroupPolicy.WMOriginal
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\admfiles.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\adm files.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\conf.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\con f.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\inetres.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\ine tres.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\system.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\sys tem.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wmplayer.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wmp layer.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wuau.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wua u.adm
Copied file C:\WINDOWS\System32\GroupPolicy\GPT.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat
Entered SaveSecuritySettings
Inf path:
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\
Saving XP security settings
Saving Account Policies...
Saving Audit Policies...
Saving user rights...
Name: Administrator
Comment: Built-in account for administering the computer/domain
Full Name:
No rights.
Name: Guest
Comment: Built-in account for guest access to the computer/domain
Full Name:
Right: SeInteractiveLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: HelpAssistant
Comment: Account for Providing Remote Assistance
Full Name: Remote Desktop Help Assistant Account
No rights.
Name: SUPPORT_388945a0
Comment: This is a vendor's account for the Help and Support Service
Full Name: CN=Microsoft Corporation,L=Redmond,S=Washington,C=US
Right: SeBatchLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: vector
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: wintest3
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: None
Comment: Ordinary users
No rights.
Name: Administrators
Right: SeSecurityPrivilege
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeRemoteShutdownPrivilege
Right: SeTakeOwnershipPrivilege
Right: SeDebugPrivilege
Right: SeSystemEnvironmentPrivilege
Right: SeSystemProfilePrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeIncreaseBasePriorityPrivilege
Right: SeLoadDriverPrivilege
Right: SeCreatePagefilePrivilege
Right: SeIncreaseQuotaPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeManageVolumePrivilege
Right: SeImpersonatePrivilege
Right: SeCreateGlobalPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Right: SeRemoteInteractiveLogonRight
Name: Users
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Guests
No rights.
Name: Power Users
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Account operators
No rights.
Name: System operators
No rights.
Name: Printer operators
No rights.
Name: Backup operators
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Replicators
No rights.
Name: RAS servers
No rights.
Name: Pre2000 compatible access
No rights.
Exiting SaveUserRights (0)
Saving Security Options
Found: MACHINE/Software/Microsoft/Driver Signing/Policy
Data type is 3
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SecurityLevel
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SetCommand
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateCDRoms
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateDASD
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateFloppies
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/CachedLogonsCount
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ForceUnlockLogon
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/PasswordExpiryWarning
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ScRemoveOption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DisableCAD
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DontDisplayLastUserName
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeCaption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeText
Data type is 7
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ScForceOption
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ShutdownWithoutLogon
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/UndockWithoutLogon
Data type is 4
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineAccessRestriction
Data type is 1
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineLaunchRestriction
Data type is 1
Found: MACHINE/System/CurrentControlSet/Control/Lsa/AuditBaseObjects
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/CrashOnAuditFail
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/DisableDomainCreds
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/Lsa/EveryoneIncludesAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FIPSAlgorithmPolicy
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/ForceGuest
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FullPrivilegeAuditing
Data type is 3
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LimitBlankPasswordUse
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LmCompatibilityLevel
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinClientSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinServerSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoDefaultAdminOwner
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoLMHash
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymousSAM
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/SubmitControl
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Print/Providers/LanMan Print
Services/Servers/AddPrinterDrivers
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/SecurePipeServers/Winreg/AllowedPaths/Machine
Data type is 7
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/Kernel/ObCaseInsensitive
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session Manager/Memory
Management/ClearPageFileAtShutdown
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/ProtectionMode
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/AutoDisconnect
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableForcedLogOff
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionPipes
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionShares
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/RequireSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnablePlainTextPassword
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/RequireSecuritySignature
Data type is 4
Found: MACHINE/System/CurrentControlSet/Services/LDAP/LDAPClientIntegrity
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/DisablePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/MaximumPasswordAge
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RefusePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireSignOrSeal
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireStrongKey
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SealSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SignSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/NTDS/Parameters/LDAPServerIntegrity
Data type is 4
Administrator's user name = Administrator
Guest's user name = Guest
SaveHive entered
SaveHive exit : 0
Exiting SaveSecuritySettings 0x0
Backup path: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Exiting BackupOriginalGP 0x0
Entered RestoreCachedGP.
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
No gpt.ini detected, aborting RestoreCachedGP.
Checking whether OriginalGP exists
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring original GP.
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.UserCache,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.UserCache\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\User\MIC ROSOFT\IEAK\install.ins to
C:\WINDOWS\System32\GroupPolicy\User\MICROSOFT\IEA K\install.ins
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol to
C:\WINDOWS\System32\GroupPolicy\User\Registry.pol
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS2.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS2.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS3.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS3.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
to C:\WINDOWS\System32\GroupPolicy\Machine\Registry.p ol
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered MergeGptFile(C:\WINDOWS\System32\GroupPolicy.UserC ache, 0x80000070)
g_dwVersion: 0x0.
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Found machine extensions...
Found user extensions...
Exiting MergeGptFile 0x0
Reading user's user settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol
Entered parseRegFile
Val: 'BlockExeAttachments'
Added: Software\Microsoft\Outlook Express\BlockExeAttachments
Val: 'NoHTMLWallPaper'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\NoHTMLWallPaper
Val: '**del.NoChangingWallPaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop, val:
NoChangingWallPaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\**del.NoChangingWallPaper
Val: 'ForceClassicControlPanel'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceClassicControlPanel
Val: 'NoSMMyPictures'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMMyPictures
Val: 'NoStartMenuMyMusic'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoStartMenuMyMusic
Val: 'NoDesktopCleanupWizard'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoDesktopCleanupWizard
Val: 'NoWelcomeScreen'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoWelcomeScreen
Val: 'NoActiveDesktop'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktop
Val: '**del.NoInternetIcon'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoInternetIcon
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoInternetIcon
Val: '**del.NoNetHood'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val: NoNetHood
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoNetHood
Val: 'NoAutoUpdate'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoAutoUpdate
Val: 'NoSMBalloonTip'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMBalloonTip
Val: 'NoSMConfigurePrograms'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMConfigurePrograms
Val: 'NoComputersNearMe'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoComputersNearMe
Val: 'MaxRecentDocs'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\MaxRecentDocs
Val: 'NoSharedDocuments'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSharedDocuments
Val: '**del.NoStartMenuEjectPC'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoStartMenuEjectPC
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoStartMenuEjectPC
Val: 'NoActiveDesktopChanges'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktopChanges
Val: '**del.NoAddPrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoAddPrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoAddPrinter
Val: '**del.NoDeletePrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoDeletePrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoDeletePrinter
Val: '**del.NoToolbarsOnTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoToolbarsOnTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoToolbarsOnTaskbar
Val: '**del.NoSetTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoSetTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoSetTaskbar
Val: 'ForceStartMenuLogOff'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceStartMenuLogOff
Val: '{20D04FE0-3AEA-1069-A2D8-08002B30309D}'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\{20D04FE0-3AEA-1069-A2D8-08002B30309D}
Val: '**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{450D8FBA-AD25-11D0-98A8-0800361B1103}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}
Val: '**del.{645FF040-5081-101B-9F08-00AA002F954E}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{645FF040-5081-101B-9F08-00AA002F954E}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{645FF040-5081-101B-9F08-00AA002F954E}
Val: '**del.Wallpaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val: Wallpaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.Wallpaper
Val: '**del.WallpaperStyle'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val:
WallpaperStyle
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.WallpaperStyle
Val: 'NoDispScrSavPage'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\NoDispScrSavPage
Val: 'NoAddFromNetwork'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\NoAddFromNetwork
Val: '**del.NoAddRemovePrograms'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall, val:
NoAddRemovePrograms
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\**del.NoAddRemovePrograms
Val: 'ListBox_Support_Allow'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\ListBox_Support_Allow
Val: '*.fleetviewonline.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.fleetviewonline.com
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.osg.com
Val: 'NoHelpItemTutorial'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemTutorial
Val: 'NoHelpItemNetscapeHelp'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemNetscapeHelp
Val: 'NoHelpItemSendFeedback'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemSendFeedback
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\Certificates\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CRLs\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CTLs\
Val: 'ScreenSaverIsSecure'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaverIsSecure
Val: 'ScreenSaveActive'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveActive
Val: 'ScreenSaveTimeOut'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveTimeOut
Val: 'SCRNSAVE.EXE'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\SCRNSAVE.EXE
Val: 'ListBox_Support_ZoneMapKey'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ListBox_Support_ZoneMapKey
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\*.osg.com
Val: 'osgintranet'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\osgintranet
Val: '1A00'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1A00
Val: '1809'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1809
Val: '1803'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1803
Val: 'DontPromptForWindowsUpdate'
Added:
Software\Policies\Microsoft\Windows\DriverSearchin g\DontPromptForWindowsUpdate
Val: 'NC_RenameLanConnection'
Added: Software\Policies\Microsoft\Windows\Network
Connections\NC_RenameLanConnection
Val: 'PromptPasswordOnResume'
Added:
Software\Policies\Microsoft\Windows\System\Power\P romptPasswordOnResume
Val: 'NoAUAsDefaultShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUAsDefaultShutdownOption
Val: 'NoAUShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUShutdownOption
Val: 'BehaviorOnFailedVerify'
Added: Software\Policies\Microsoft\Windows NT\Driver
Signing\BehaviorOnFailedVerify
Val: 'MovieMaker'
Added: Software\Policies\Microsoft\WindowsMovieMaker\Movi eMaker
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol 0x0
Reading user's computer settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
Entered parseRegFile
Val: 'NoUpdateCheck'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoUpdateCheck
Val: 'NoSplash'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoSplash
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: 'NV PrimaryDnsSuffix'
Added: Software\Policies\Microsoft\System\DNSClient\NV PrimaryDnsSuffix
Val: ''
Added: Software\Policies\Microsoft\Windows\Safer\
Val: 'WUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUServer
Val: 'WUStatusServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUStatusServer
Val: 'NoAutoRebootWithLoggedOnUsers'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoRebootWithLoggedOnUsers
Val: 'AutoInstallMinorUpdates'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AutoInstallMinorUpdates
Val: 'DetectionFrequencyEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequencyEnabled
Val: 'DetectionFrequency'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequency
Val: 'UseWUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\UseWUServer
Val: 'RescheduleWaitTimeEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTimeEnabled
Val: 'RescheduleWaitTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTime
Val: 'NoAutoUpdate'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoUpdate
Val: 'AUOptions'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AUOptions
Val: 'ScheduledInstallDay'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallDay
Val: 'ScheduledInstallTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallTime
Val: 'RegistrationOverwritesInConflict'
Added: Software\Policies\Microsoft\Windows
NT\DNSClient\RegistrationOverwritesInConflict
Val: 'SearchList'
Added: Software\Policies\Microsoft\Windows NT\DNSClient\SearchList
Val: 'PreventIISInstall'
Added: Software\Policies\Microsoft\Windows NT\IIS\PreventIISInstall
Val: 'SecurityCenterInDomain'
Added: Software\Policies\Microsoft\Windows NT\Security
Center\SecurityCenterInDomain
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol 0x0
Entered GenerateGptFile(C:\WINDOWS\System32\GroupPolicy)
g_dwVersion: 0x70007.
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x70007 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting GenerateGptFile 0x0
Exiting RestoreCachedGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Bumping GPT version...
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x70007 in gpt.ini
Using version: 0x70007
Saving GPT version: 0x80008
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x80008 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
No data for Administrator account name.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
Signalling OS to refresh policies
RegQueryValueEx returned 2
Policies are set to apply asynchronously
Policies will be processed asynchronously
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x80008 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x80008 in gpt.ini
Using version: 0x80008
Saving GPT version: 0x90009
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x90009 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entering RunGPUpdate
Exiting RunGPUpdate 0
Exiting ApplyPolicies 0x0
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x34349ce0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x2001. Event: 0x2000.
Impersonation: 0x1
Opened Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Current time high: 0x1c58076
Reading Last Run Time High from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Last Run Time High: 0x1c58076 in key
Software\Novell\Workstation Manager\Group Policies
Previous time high: 0x1c58076
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.
Full Object DN
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG,
WINNT Workstation Package, zenwmGroupPolicy, 512, pBuffer)
WMGetAllAssociatedObject returned 2
No associated workstation policies. Deleting
C:\WINDOWS\System32\GroupPolicy.WksCache.
DeleteGPRegVal: Error 0x2 deleting Group Policy Machine Flags
Exiting CheckForObsoleteWksCache 2
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x1 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Policy applied at predesktop. Skipping reapplication at user login.
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x38844da0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
Thanks in advance
AliDUPLICATE
Answered in
novell.support.zenworks.desktops.3x.workstation-manager
Regards
Rolf Lidvall
Swedish Radio (Ltd)
NSC SysOp -
Hi there,
I was wondering whether anyone could tell me which feature in Windows 7 produces this message "This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of
the package to basic." and whether it can be turned off in Windows to prevent this message from appearing when installing certain programs that aren't WHQL certified. At first I thought it was the UAC control that generated this message but found out
that it wasn't and then thought it was the DEP control and found out that it wasn't this either. I'm only seem to be getting this message when installing FileDirector Component Service Version 3 on a few of our workstations which is an add-on that allows file
integration with Office and is part of FileDirector WinClient Version 3.
Your help would be much appreciated.
Many thanks,
RocknRollTim
P.S. I know of a way to bypass this message but would ideally not like to have the feature turned on and for the message not to be appear for non WHQL certified program installations in order to make non WHQL certified program installations in the future much
easier, more simpler and straightforward to carry out. I was redirected by a moderator off the Microsoft Community Forum.Hi,
You can try following options to disable this prompt, but we don't recommend you to do so since this feature helps you to protect your computer.
Option 1: Run command as admin:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Restart your computer to apply changes.
Option 2: Disable in GPO:
1.Type gpedit.msc in the Run dialog and press Enter.
2.In the Group Policy Editor, navigate to User Configuration → Administrative Templates → System → Driver Installation.
3.Double-click on Code signing for device drivers in the right-side pane as shown above.
4.In the windows that opens, choose Enabled. In the Options, choose Ignore as shown. Then click on the OK button to save the settings.
Restart your computer to apply changes.
Kate Li
TechNet Community Support
Unmarked as Answer based on OP's request.
https://social.technet.microsoft.com/Forums/en-US/35ab1279-c3a1-46be-9f7d-45e8606c1410/this-advertised-application-will-not-be-installed-because-it-might-be-unsafe-contact-your?forum=w7itproappcompat
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
[SOLVED]MPD and PulseAudio: cannot init supplementary groups of user
I used to run mpd as a seperate user "mpd" but after installing pulseaudio as a requirment for gnome 3, I had to make it run as my user or run pulseaudio system wide (What is wrong with system mode) after changing all mpd files permisions and updating /etc/mpd.conf i still get this error
[jacob@BlackWater ~]$ mpd
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
daemon: cannot init supplementary groups of user "jacob": Operation not permitted
mpd continues to run though however when attempting to play anything i get this error
problems opening audio device
I found a fourm with the same problem marked solved but could not find what they did
https://bbs.archlinux.org/viewtopic.php … 09#p421209
Last edited by tsr-nc (2011-05-05 00:19:30)[jacob@BlackWater ~]$ mpd
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
this is not actually an error. It just says it bound to your ipv6 interface before it could be bound to ipv4 interface. Define your binding statically in mpd.conf with
bind_to_address "127.0.0.1"
daemon: cannot init supplementary groups of user "jacob": Operation not permitted
you are running mpd as user, altho you should be running it as root
if you want to run it as user, make sure to remove the user line from mpd.conf
problems opening audio device
I can only guess here. You are saying you have pulseaudio. Did you configure the pulseaudio output in mpd.conf?
if you do so, make sure to comment out the alsa output. If you want to use the alsa output with your pulseaudio server, make sure you have pulseaudio-alsa installed
Last edited by Rasi (2011-05-04 18:59:49) -
i have a doubt about how to create a user on solaris.
I gave the command :-
useradd -g oinstall -d /u01/mediate mediate
It creates the user but then i give
# su - mediate
su: No directory!
It is probably not create the home directory for the user, so, is not able to do change user. Please, do the needful as i need it very urgently.
regardsSaid that this is not the best forum for such a question (I'd try with Generic Linux) you may try using "-m" option.
"man useradd" may also be useful. -
Huge list of Groups in Users and Groups
I just upgraded SL to ML. I've been learning and setting things up.
I use the machine as a standard user and I have a "silent" admin user, too.
I was wondering if anyone has come across this? I went into System Preferences and noticed that there was a HUGE list of Groups. Some had "logical" names like admin server, etc. The list was super long. Some of the name were strange, like "umbg" I have no idea how they got there. And, searching here, and googling doesn't give me any info.
I don't know how all these groups got there. I did not add a single one.
I did make a mistake, because I deleted them all and then ML made my admin user a standard user and I could not unlock System Preferences, or use my password anywhere. ugh.
I tried finding a way to fix it, but I ended up just using Restore from disk utility. no worries, didn't have that much going on, yet.
Is it normal to have a list of groups that you did not create? Does ML just create groups in your Users and Groups list??
How do I take care of it if it happens again? Can some be deleted? If so, which ones? What are they for?
Thanks for any help with this.Okay, I did do the restore.
And, the groups were not there.
So, first off, I opened TinkerToolSystem and went through all thes options. I found one: Show Groups in users and groups. I made sure it was not checked. Hopefully, it will not repopulate.
Then I remembered something. I did download Onyx. I was just looking for a way to change something simple. Mostly, I just looked around, didn't click on buttons, etc. But, Onyx may have change this setting (or me using Onyx inadvertently). Whichever, whatever, I've used TinkerToolSystem for years and it's always worked so well. I think I'm sticking with it and not install Onyx - which I had to go through the Gatekeeper exception deal... so it makes me nervous.
I'll post back if further issues with this. -
In which table is the relation stored between purchasing group and user?
it seems to be that a purchasing group is related to an user in the client system i am working for now. I cannot find these relations in HR.
In which HRPxxxx is the relation stored? With which transaction can i change the relationship?
thanksHello Theo,
please, clarify your problem.
How do you know concerned user is linked to such purchasing group?
User assignement in the organizational structure is maintained with PPOMA_BBP transaction.
Regards.
Laurent. -
How is possible change an administrator user to standar via terminal?
HI to all!
How is possible change an administrator user to standar via terminal (unix command)?
thanks a lot
SimoneThank you Mr Hoffman!
i have found this command:
dscl . -append /Groups/admin GroupMembership shortname
it's working, what do you think about it? -
Change group uniqueID to objectGUID
Hello,
we have a portal installation based on Netweaver 2004s/Windows. We also use an corporate ADS for the user authentication. Further we use the ADS-groups to set permissions and roles for a group of users.
Because of the fact that the unique ID of the ADS group is in standard structured like this: <Principal_Type>.<Home_Data_Source_ID>.<Uniquename> i.e. USER.CORP_LDAP.uid=miller,ou=research,o=sap, it's problematic to rename a ADS-group because all assigned roles get lost.
That's why we think of using the ADS-attribute objectGUID as the uniqueID for the group.
But it is only possible to change the Uniquename. But if I do this, I cannot find any group by name search with the Identity Management.
Is it possible to change the structure of the attribute uniqueID? I can't find anything about that in the help.
Thank you!
Best Regards
FrankHi Alex,
Try this tcode:- crmd_mkt_tools
Go to the "Marketing Attributes" section and there you will find relevant solution tools for your purpose.
Hope this helps.
rgrds,
Randhir Soni -
When elevating privilege for a standard user using an admin account, the UAC runs the application under the admins account "user" and not the standard users account "user", the problem is that doing so, it does not change the standard
users settings
In this example, trying to change the "Check for Updates Automatically" as the standard user, is grayed out, you have to be an admin to change this. This is a design of Java.
When you right click and run as an administrator, the option is no longer grayed out and can be deselected, however, this only changes that setting for the admins specific "user", not the standard users specific "user" the admin is elevating
privilege for. as illustrated below.
Is there a work around for an admin to run his credentials but elevate the standard users session instead of his own or some other way to set the standard users setting when admin credentials are required?Hi,
Based on your description, I understand that you want to disable
Check for Updates Automatically option for standard users in Java.
You can achieve this target by editing
EnableJavaUpdate registry entry. For more details, please refer to following articles and check if can help you.
(Please back up before that registry operation. That will help us to avoid unexpected issues.)
How to disable Java Update in Windows
7
Disable Java updates with
Group Policy
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
However, this issue is related to Java product. I suggest that you should contact with Java product support.
I believe we will get a better assistance there.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
My 1st user account was an administrator account, 2nd user account was a standard account. 3rd user account was a guest account of window 8 single language, however i accidentally made a mistake by setting guest account from standard account to become an
administrator account. I also set down the 1st user account from administrator to standard account and after these stupid settings, the guest account becomes administrator account anyone can access in without any password, the 1st and 2nd accounts become standard
accounts! Before this mistake, the 1st user account was the main account of mine, 2nd and 3rd (guest account) were logged in very rarely.
The problem is when i logged in guest account as administrator, i cannot set the 1st or 2nd back to become another administrator account. Something has gone strange, it has been prevented me to set the others to be administrator and the guest back to standard
account. Being as an administrator account, the guest account was totally useless in changing settings. When i logged in with 1st and 2nd account, i also cannot change anything in the user account settings (change type of user account) and family safety, all
attempts to change the user account settings was useless such as i never tried. I also tried "refresh your computer without losing files" but not worked. Please provide me some advices!
I did not find the forum for win 8 single language, so i place my question here.Thanks for your reply. I tried to go to safe mode of win 8 by holding the shift key while clicking "restart" on the login screen. (My login screen now shows 3 account users). Then i chose troubleshoot -> advanced options -> windows startup
settings-> i went to safe mode. The safe mode only showed a complete black screen with an only window: "Administrator: cmd.exe". I did as you said (typing NETPLWIZ) and the User accounts window appeared. I went to "properties" of each
user account and set 1st and 2nd accounts to Administrator but got the error: "This user cannot be added. Access is denied." and another error window: "Usert accounts: the group membership for ... could not be updated."
Yesterday, i went to elevated command prompt as an administrator and typed "net user administrator /active:yes" with hope that the built-in administrator would be activated and i would use it for full control settings of 3 other user accounts.
But i got the error: "system error 5. Access is denied."
Now, my position is quite bad. Login with guest account which was set as administrator, i still can not have full control of this laptop, so that all attempts of mine to change the user account settings is denied. This guest account also does not have a
password at all so that everyone can open my computer without typing a password. Because access is denied, i cannot set a password for the guest account even now it is the administrator account and i am loging in it.
p/s: I tried to refresh the system but still got the error: "There was a problem refreshing your PC. No changes were made". And i also tried to restore the system, but got the error: "System restore did not complete successfully. Your computer's
system files and settings were not changed. Details: A volume shadow copy service component encountered an unexpected error. Check the Application event log for more information (0x80042302)"
I went in registry editor in safe mode and did as you said but there was no "AutoAdminLogon", "DefaultUserName", "DefaultPassword". I only saw "AutoLogonSID" and other different names...
The problem i got half year ago has still remained and recently i made this mistake. https://social.technet.microsoft.com/Forums/en-US/8ebd868c-bdfd-412e-95a6-9dc0095d431c/cannot-paste-any-online-pictures-from-any-websites-into-wordpowerpointonenote-2013?forum=officeitpro
I am a young woman who always creates mistakes when setting computer because of my carelessness.
Hi,
These phenomenon should be access rights problem, you need to check your current system User Accounts status. In my opinion, your administrator account probably disabled.
Open Run, type LUSRMGR.MSC, press Enter.
Then check your current system account which Group they are belongs to.
If there is any progress, please feel free let me know.
Roger Lu
TechNet Community Support -
Isthere any way to change schema's user name. I have looked but couldnt find how to change. With "Alter user" name cant be changed.
Thanks for the help...Hi,
SQL> host exp system/oracle owner=scott file=c:\scottschema.dmp log=c:\scott.log
Export: Release 10.1.0.2.0 - Production on Tue Dec 12 09:36:37 2006
Copyright (c) 1982, 2004, Oracle.
All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 -
ProductionWith the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified users ....
exporting pre-schema procedural objects and actions.
exporting foreign function library names for user SCOTT.
exporting PUBLIC type synonyms.
exporting private type synonyms.
exporting object type definitions for user SCOTT
About to export SCOTT's objects ....
exporting database links.
exporting sequence numbers.
exporting cluster definitions.
about to export SCOTT's tables via Conventional Path .... .
exporting table A 0 rows exported. .
exporting table ABCDEFGHIJKLMNOPQRSTUVWXYZ 0 rows exported. .
exporting table ABCDEFGHIJKLMNOPQRSTUVWXYZ1234 0 rows exported. .
exporting table A_12345678901234567890123456$# 0 rows exported. .
exporting table B 100 rows exported. .
exporting table BIG 46968 rows exported. .
exporting table BIG_TABLE 46967 rows exported. .
exporting table BONUS 0 rows exported. .
exporting table C 1000 rows exported. .
exporting table D 1000 rows exported. .
exporting table DEPT 4 rows exported. .
exporting table E 1000 rows exported. .
exporting table EMP 14 rows exported. .
exporting table FINAL_OUTPUT. .
exporting table Q 10000 rows exported. .
exporting table SALGRADE 5 rows exported. .
exporting table T 1000 rows exported. .
exporting table TEST 7 rows exported.
exporting synonyms.
exporting views.
exporting stored procedures.
exporting operators.
exporting referential integrity constraints.
exporting triggers. exporting indextypes.
exporting bitmap, functional and extensible indexes.
exporting posttables actions.
exporting materialized views.
exporting snapshot logs.
exporting job queues.
exporting refresh groups and children.
exporting dimensions.
exporting post-schema procedural objects and actions.
exporting statistics
Export terminated successfully without warnings.
SQL> select user_id,username from user_users;
USER_ID USERNAME
57 SCOTT
SQL> select count(*) from session_privs;
COUNT(*)
81
SQL> select count(*) from session_roles;
COUNT(*)
6
SQL> set echo off
SQL> set feedback off
SQL> set heading off
SQL> spool c:\scottpriv.sql
SQL> select 'grant 'privilege' to newscott;' from session_privs;
SQL>spool off
SQL> spool c:\scottroles.sql
SQL> select 'grant 'role' to newscott;' from session_roles;
grant CONNECT to newscott;
grant RESOURCE to newscott;
grant IMP_FULL_DATABASE to newscott;
grant SELECT_CATALOG_ROLE to newscott;
grant HS_ADMIN_ROLE to newscott;
grant EXECUTE_CATALOG_ROLE to newscott;
SQL> spool off
SQL> set heading on
SQL> set feedback on
SQL> set echo on
SQL> select default_tablespace from user_users;
DEFAULT_TABLESPACE
TEST
1 row selected.
SQL> conn system/oracleConnected.
SQL> create user newscott identified by newscott default tablespace test;
User created.
SQL>@c:\scottpriv.sql <>
SQL>@c:\scottroles.sql <>
SQL> host imp system/oracle fromuser=scott touser=newscott file=c:\scottschema.dmp log=scottimp.log
Import: Release 10.1.0.2.0 - Production on Tue Dec 12 09:54:39 2006Copyright (c) 1982, 2004, Oracle.
All rights reserved.Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - ProductionWith the Partitioning, OLAP and Data Mining optionsExport file created by EXPORT:V10.01.00 via conventional pathimport done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set. importing SCOTT's objects into NEWSCOTT. .
importing table "A" 0 rows imported. . importing table "ABCDEFGHIJKLMNOPQRSTUVWXYZ" 0 rows imported. .
importing table "ABCDEFGHIJKLMNOPQRSTUVWXYZ1234" 0 rows imported
SQL>drop user scott cascade;
SQL> select username,user_id from user_users;
USERNAME USER_ID
NEWSCOTT 5
81 row selected.
SQL> select count(*) from session_privs;
COUNT(*)
81
1 row selected.
SQL> select count(*) from session_roles;
COUNT(*)
6
1 row selected.
SQL>Try above scripts if it is help
regards
Taj
Message was edited by:
M. Taj
Maybe you are looking for
-
Getting the Portal URL in the code
Hi All, Is it possible to get the URL of the Enterprise Portal (http://<host>:<port>/irj/portal) in the web dynpro code? Actaully i am sending mails from my application to various users and need to include the URL of the Enterprise Portal in the mail
-
Title : Oracle 9iAS O/S : MS Windows POST: REPLY (W/QUOTE) Author : adedoja adeyemi Type : Question Date : Jun 5, 2002 16:18 PT Hi Can anyone advice on what to do pls. The portal installation stopped after 20%,the statement displayed was an unexpecte
-
I'm having a little trouble figuring this out. Thought someone on here might have done something similar. The shot: A person walks down a sidewalk. The camera dollies parallel to them so it sees a wide of their profile. The person disappears and reap
-
Hi All, I have two types created in my Oracle DB. 1. One is of RECORD TYPE NAME :- "REGIONREC" 2. The other is a TABLE of the above Record TYPE Name :- "REGIONFRANCHISE" This is a table of "REGIONREC" I have a Stored Procedure which has an input para
-
LabVIEW normally prints to the default printer. Can anyone help with a vi to select the printer before printing the frontpanel or diagram in an application? Peter Vijn, Organon Newhouse, Scotland