Change host name on windows 2k3 post successful Essbase 11.1.2.1.0 install

Hi gurus
installed Essbase 11.1.2.1.0 successfully on windows w2k3 ent srever 32 bit
can I change the host name to include domain name
currently it is
xxx.xx.xxx.xxx somehost
can it be changed to
xxx.xx.xxx.xxx somehost.local.com somehost
is hostname hardcoded anywhere in essbase (or obiee)?

Host name : would be computer name
domain name: security asigned in the network ( i hope)
so you can login via your ipadress , host name(localhost),(computername ), and assigined computername_domainname
but if u see in ur pc where C:\WINDOWS\system32\drivers\etc\host...u can see the localhost information
in my case while installing , it took domain name +computername
Hyperion is such smart application it takes host name while installation and after installation even it takes name as localhost also.
Unless ur authorised to change the domain name but i dont hope ur infra team will be able to allow you it

Similar Messages

How to changing host name

how do i changing host name after install. it never asked me for one and now its stuck on unknown.

Recent forum threads have started like this one,
then got completely out-of-focus and derailed.
e.g.
http://forum.sun.com/jive/thread.jspa?threadID=106335 from Sept '06,
which references a thread from Aug '06, with 80+ replies inside it ...
http://forum.sun.com/jive/thread.jspa?threadID=105923
Your Ethernet connection and your system hostname are not going to work,
if you don't have a compatible network adapter.
You won't connect to anything, and the OS can't associate its FQDN,
without hardware that works.
Have you reviewed the HCL, and compared it with your hardware?
http://www.sun.com/bigadmin/hcl/
You may need to install 3rd party drivers for the NIC,
or you may need to buy a replacement card that is compatible.
Boot the system. From a terminal window, as root user, do ...
# ifconfig -a <enter>
Does the output from that command list anything in addition to the virtual loopback adapter?
Copy and paste the complete output back here into the forum thread,
so that others can see what you are seeing.
If the loopback LO0 is all you have, then you're going to have to fix that
before going any further in this discussion.

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

How to change host name or host ip in AIA after installation

Hi,
we have AIA11.1.1.5.0 and O2C PIP installed.
we need to change host name used in AIA to some different value.
Could you please suggest what all steps are required for this.
Thanks & Regards,
Bob

1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

Changing Host Name in OCS 10.1.2

I have Installed OCS 10.1.2 on RedHat Linux AS 4.5 (x86) on HP-Proliant DL 180 G5 Server.
I want to configure Apache Server in OCS to launch a web site.
Can anybody guide me with the Apache Configuration,
I have tried but as my site name and Host Name are same i am unable to do it -
Is it possible to change the HOSTNAME on OCS ?
Some guidence on this issue will help me to proceed else i will have to re-install OCS.

Do changing host name effect in google PR update ?

MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

Hi,
Do not change the hostname after the installation, if you need to then you have to perform system copy.
Refer: Note 8307 - Changing host name on R/3 host: What do you do?
Regards,
SBK

Can you change the name of Windows 10 as "Anish Windows 10" ?

Hi Team,
Thanks for your windows 10 technical Preview.
Please change the name of Windows 10 as "Anish Windows 10". Please consider our request. The name "Anish" will improve the performance of Windows 10. "Anish is a well known person in this world he only created the world. so he only
can improve the performance of Windows 10".
Revert to us if you need any further information.
Regards,
Anishin Rasigargal

Thanks,
Where i can find the build in feedback app ?
--->
How to Send Feedback to Microsoft in the Windows 10 Technical Preview
Carey Frisch

10.5 server changes host name when changed to be member of 10.4 OD Master

Hi,
I have a Xserve with 10.4.11. This is my working OD master hostname: AAA, FQDN: AAA.domain, realm DOMAIN. Now I have a PowerMac G5, hostname BBB, FQDN BBB.domain, where I install 10.5 server.
When it comes up as stand alone, the hostname is BBB (FQDN BBB.domain), but when I then connect it (as domain member) to my OD master, it promts me to say that "AAA" is a used hostname and that it changes hostname to" AAA (2)".
In my DNS it is still identified as BBB.domain, and it is bind to the realm as BBB.
Why does it act like this?
Subsequently I can't get kerberos to work and SMB does not want to be a member of the domain (always get back to standalone instead of becoming member of the domain).

Here comes a bit more on this one. I waited and maybe this had to do with having a OD master in Tiger and the OD member on Leopard. But now both are in Leopard. And things are the same.
I have thou been studying the Console after some tips. And I'm changing the host name in Server Admin/Network to BBB (what it should be). And it seems to work fine. Name of the server changes where supposed to (what I can see). And in Console I can se that the administration tool changes host name in a variety of places.
And now I wait.
If I do nothing (the network is pretty small), nothing happens. But after a while, I login with for example Remote desktop the followingapears in Console:
+Jan 3 12:58:02 emil mDNSResponder[30]: User updated Computer Name from AAA (2) to AAA+
+Jan 3 12:58:02 emil mDNSResponder[30]: afpovertcp.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: ssh.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: sftp-ssh.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: servermgr.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: rfb.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: ldap.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: net-assistant.udp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: adisk.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: User updated Local Hostname from AAA-2 to AAA+
+Jan 3 12:58:03 emil mDNSResponder[30]: Local Hostname AAA.local already in use; will try AAA-2.local instead+
+Jan 3 12:58:03 emil mDNSResponder[30]: afpovertcp.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: ssh.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: sftp-ssh.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: servermgr.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: rfb.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: ldap.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: net-assistant.udp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: adisk.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: User updated Computer Name from AAA to AAA (2)+
+Jan 3 12:58:03 emil mDNSResponder[30]: User updated Local Hostname from AAA to AAA-2+
+Jan 3 12:58:03 emil mDNSResponder[30]: mDNS_SetFQDN - hostname unchanged+
"AAA (2) to AAA" may as well be "BBB to AAA". But I'm very surprised over that the logg claims that "User updated Computer name..." For all I know, I haven't. And note in the middle here that the mDNSResponder changes to AAA (which indeed is used - it's the OD master!!!), discovers that the name is in use, and then changes to "AAA (2)".
But why does it at all initiate a change from AAA to "AAA (2)"?
Why can't I call the server BBB?

Changing HOST Name in Oracle 10G AS

Hi,
I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM
Machine is UTI ...Every Thing is Working Fine ..... After the Successful Installation of 10G AS Suddenly i got requirement to the Change host (UTI to UTTI)
so i have changed the host Name to UTTI after that Oracle 10G AS is not Working , i know that every thing is registered with host name as UTI
is it any possible Solution to make it Working Fine
Any Advice on this .
Thanks for Your Valuable Information
SHAN

user609980 wrote:
I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM Good question. One that is appropriate for the App Server forums, not the Database forums.
And answered in the docs.
Which docs? Well, that depends on the VERSION of the app server. Not the BRAND as you specified. (Assuming 10g R2, 10.1.2.x, you would look under App Server 10g R2 docs at http://tahiti.oracle.com, click on the System Management tab, and look at Chapter 8 of the "Oracle Application Server >> Administrator's Guide"

Change Host Name and IP Address on machine running WLS 9.2

Hello,
I am new to this community, so please forgive any unintended missteps.
I have an installation of BEA WebLogic Server 9.2 running on Windows 2003 Server SP2. This installation is running on a virtual server, which was created using some VMware product that copies or clones production environments. The purpose of this new, cloned environment is to act as a development environment. This new DEV server has a different host name and IP address from the source PROD server.
WLS is not starting up properly. It complains about the license.bea file not being valid. To try to fix that, I manually changed the IP address listed within that file, from that of the original system to that of the current system, but that did not change the error message I get during startup.
I imagine that this instance of WLS needs to be re-licensed to account for the change in IP address. Besides that, are there any other configuration parameters in text files, registry settings, etc., that need to be modified in order to allow the new instance of WLS to work the same as the old instance?
Please note that we want both DEV and PROD to run simultaneously, so we need to take steps to ensure they (and the applications running on WLS) don't talk to each other.
I tried to search the BEA sites and found a few resources, but related to some other products (ALES?), not WLS.
Thoughts, suggestions, feedback, or pointers to documentation would be greatly appreciated.
Thanks,
JPG.

Hi JPG,
The BEA license files are tied to IP address. Editing the license.bea to change the IP address file will not work.
Any reason why you cannot use a 5 user dev license for your environment?
If you break the 5 user limit then use IIS or Apache to front-end the the WLS instance.
Cheers
Mike

Changes to names in window don't affect file names

I had to reinstall many items on my computer recently, and keep encountering strange little things that did not happen before. Sometimes there are errors on a song title or artist name. In making those changes in the iTunes window in the past, I would see the song show up in a folder where all the music is stored. Now, when I make the change, it only takes place in the iTunes window, and does not affect what is in the folder, meaning I need to go back and make the change there, also. Anyone know what needs to be done to recreate the type of link I had before?

iTunes prefs -> Advanced. Tick *Keep iTunes music folder organized*.
If the songs are not in the iTunes music folder spcified in prefs, they will not be changed.

Change the name of window in SAP B1 8.8

Dear All,
I want to change the name of the A/R Down Payment request window to some other name. I have tried to do the same from frontend from document numbering but the problem is since there are no separate series for Down Payment request & invoice when I change the name there only the down payment invoice name changes while down payment request remains the same. Please guide if there is any table in SAP where all the window names might be saved and where I can go and edit the name without any repercussions.

Hi,
Gordon is right you will get more replies if it's flagged as a question as people can earn points.
But I'm feeling generous :P
I don't know a way to do it like you mentioned, but you can just use the UI. There's loads of ways to do it but you could catch the form load event on before action = true, and do
If (oForm.Title == "A/R Down Payment request")
oForm.Title = "My new title";
If you haven't worked with UI there's loads of examples and info to cover the bits I glossed over.
Good luck

Change host name on windows 2k3 post successful Essbase 11.1.2.1.0 install

Similar Messages

Maybe you are looking for