Change hostname for wifi connection

Ave forum!
I need your help to find out how to change device name, so when I look at my WiFi DHCP Server I could recognize my device. I still can do this by MAC, but would like to know how to change system name in Windows Phone.
I am using LUMIA 800
Thanks

Hi,
Welcome to the forum!
Connect your Lumia Phone via USB to your computer running the Zune PC software. Once the phone shows as connected in the Zune, do the following:
Click on the Phone status icon.
Select View Sync Options > Name Your Phone.
Enter the required phone name.
Click OK, and close Zune.
Disconnect your phone from the PC.
Hope this helps. 

Similar Messages

  • WRT54GS Access Restriction for WiFi Connected Devices

    I have the WRT54GS v4 running with the latest Firmware Version: v1.06.3 -- I am attempting to add Access Restrictions for a few MAC addresses and IP addresses (my kids iPod Touch and laptop).   
    I am simply wanting to deny total internet access from 9pm to 7am.   I have gotten it to work but ONLY for computers that are actually plugged into the router (cat 5 internet cables).  All the computers/devices that connect to the router via wifi do not seem to be restricted at all.   I am thinking this is an issue with the router in that it ONLY seems to apply the Access Restriction rules to those devices that are actually directly connected by hardwire.
    Has any one else noticed this issue for WiFi connected devices?  Access Restrictions do not seem to apply to WiFi connected devices.
    Please help -- I would hate to have to buy another router.

    Are you sure you have enter the correct MAC address or IP address? Wired connections use different MAC and IP addresses then wireless connection...

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • Workplace won't give me the password for wifi connection

    My place of employment refuse to give me the password for wifi connection. Is there anyway around this?

    Nothing legal. They do add password access for a reason.

  • I just got a new ipod and i dont know how to use it. it keeps asking me for wifi connection or to log on to itunes. i logged on to itunes but its still not working please help

    please help me use my ipod touch. i just got it and im a little confused on how to use it. it keeps asking for a wifi connection even while im logged in on itunes

    iPod touch User Guide (For iOS 5.1 Software)
    Are you connected to wi-fi?
    If not, then connect.

  • Urgent! Changing hostname for J2EE installation

    Hello,
    I'm getting confused! I'm trying to change the hostname for a j2ee engine installation (WebAS 6.40)!
    WebAS and DB are on the same server. I did everthing from the note 757692!!!
    But when I change in the registry the  key SAPLOCALHOST to the new servername and then start the j2ee engine the key is changed back to the old hostname!! and the engine is not starting!
    I'm using windows 2003 with WebAS 6.40 SP14 and MS Sql as database.
    Thanks for your help.
    Best regards
    Olaf

    Has this question ever been answered? I tried everything in the note as well, still can't get it to work.
    As a workaround i'm now installing the J2EE Engine on another server, then gonna do a java system copy via export/import. but i'd like to get the note to work as well.
    Regards,
    Bob Villangca

  • TS2756 does it matter if you have att iphone hot spot but verizon ipad for wifi connection

    does it matter if you have att iphone hotspot but verizon ipad for wifi connection

    If you are wanting to use the Verizon iPad as the hotspot you will need a Verizon plan.
    If you are going to connect your Verizon iPad to your iPhone AT&T hotspot via WiFi it makes no difference at all.

  • Change password for JCO connections

    Hi,
    In our landscape we have around 80-100 applications running and there are 300-400 JCO connections on an average. We have 4 servers like this. Earlier we used to have developers user id and password for JCO connections. Now we have decided to have a universal userid and password for all the JCo connections. My question is there any way by which we can change the passwords for all the JCO connections without going to each one of them individually as it is a hectic task.
    Thanks & Regards,
    Vijith

    Hi Vijith Kumar,
    Look at the following blog:
    /people/anilkumar.vippagunta2/blog/2007/02/06/dynamic-jco-creation
    I guess that if you can create JCO by code you can also edit it...
    Regards,
    Omri

  • Parameters n95 for wifi connection?

    hi ,please anyone had a kind heart to solve my problem, got a problem with the wifi connection, and i tried to many times, got always no gateway!! if anyone can help me pls!! i want a good suggestion for the parameters thanks in advance

    Hi,
    settings of WiFi are automatic. Device is searching for WLan and there are to possibilities;
    1)wlan without authorisation code - this means, you don't need to know any access code, if signal is strong enough, device will connect with net and you can browsing.
    2)wlan which needs authorisation code - connection is possible after giving a security code. If you don't know such a code, you can not go in.
    Sometimes even if access is public, signal can too weak or too many ppl are using it in this same time for effective connection.
    You should try to find wifi in some shopping center with cafe, restaurant, where are many open wifis, if you couldn't connect there, it would mean, that there is something wrong with your wifi module.  
    Good luck
    N95 & N96 User

  • How can i remove un/pw for wifi when teachers use their own logins for wifi connection.

    I work at a public school district and each of our teachers have ipads. They user their usernames and passwords to connect to our networks wifi. I am needing to remove the username and password of last years teachers so the new teacher can sign in with theirs. I tried the suggestion of: Settings, General, Reset and Reset all Networks but when I go back i to sign into the wifi connection it is still automatically connecting to the previous users.

    Have you talked with your networking it specialist?  Perhaps the router is keying off the MAC address.
    Robert

  • Security for WIfi connection

    How would I lock my Wifi connection to prevent other close outside computers from using it?

    https://customer.xfinity.com/help-and-support/internet/wireless-gateway-username-and-password/

  • I changed my password for wifi connection and now my wifi won't connect.

    I have an Osprey mini. Last night I needed to connect a new device to the wifi but couldn't find the card with the network password, so I got to my account online and changed the password. But when I try to connect, it says the password is incorrect.

    I am not sure that you changed the correct password, online credintials usually are seperate/different from wifi ones. Please check the quidelines on http://ee.co.uk/help/phones-and-device/ee/EE-Osprey-2-mini to see how to solutions. I hope this helps.

  • Airport Extreme username AND password for wifi connection...

    How can I connect to a wireless network that requires both a password AND username with an Airport Extreme?
    Some wifi areas in the UK such as BT Openzone homehubs require both a username and password to connect to the network, not just picking a network and add a password.
    Can anyone help?
    Thanks!

    Thanks, this solved my problem. Network kept demanding username; I guess it's different from the computer ID I use. Whatever, it wasn't easy to find the network listed, but by trial and error, I found it, highlighted it, and pressed delete key. Now the network only asks for password, which I knew, and I'm on. Great advice. But why computer was configured to do that in the first place is why I prefer PC to my wife's inscrutable macbook pro.

  • Change hostname for Grid Control

    Hi All,
    I have installed OEM grid control 10gr2(10.2.0) on solaris. The installation was successfull.
    the grid control login page appeared to be as
    http://localhost:4889/em
    I do not understand why grid control installation has picked up the localhost and local ip address 127.0.0.1 instead of using the server hostname and server ipaddress
    Lets say i have following entries in /etc/hosts
    127.0.0.1 localhost.localdomain localhost
    192.168.4.51 abc.xyz.com abc
    how to change the GRID url to http://abc.xyz.com:4889/em?
    thanks all in advance.

    Thanks for the reply
    The files are there,
    $OMS_HOME/sysman/config/emoms.properties
    And $AGENT_HOME/sysman/config/emd.properties
    bash-3.00$ emctl status agent
    Oracle Enterprise Manager 10g Release 10.2.0.1.0.
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.1.0
    OMS Version : 10.2.0.1.0
    Protocol Version : 10.2.0.0.0
    Agent Home : /u01/app/OracleHomes/agent10g
    Agent binaries : /u01/app/OracleHomes/agent10g
    Agent Process ID : 9997
    Parent Process ID : 9988
    Agent URL : https://localhost:3872/emd/main/
    Repository URL : https://localhost:1159/em/upload
    Started at : 2010-04-09 10:24:50
    Started by user : oracle
    Last Reload : 2010-04-09 10:36:08
    Last successful upload : 2010-04-09 12:15:37
    Total Megabytes of XML files uploaded so far : 22.36
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 35.24%
    Last successful heartbeat to OMS : 2010-04-09 12:17:07
    Agent is Running and Ready

  • Help needed for WiFi connection problem

    Hello
    My wife's iPad2 with current iOS 8.3 sometimes will not connect to Wi-Fi - any ideas on how to correct the problem?
    It's inconsistent! 
    Thanks for any thoughts about this.
    David

    If you want to do this in sql you've to use dynamic sql to select only columns having the data.
    And you can always use end user tools like SSRS to display only columns having values by using expression for visibility property.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
    Visakh16-
                    Can you please help me on how can I achieve this using SSRS. 
    Thanks.
    Hi Mutali,
    Personally, I don't recommend using SSRS.
    If you want to design a SSRS report,you should retireve all columns and specify column visibility for each column with following expression.
    =IIF(Fields!SomeFieldValue.Value > 0, True, False)  (Note:Supposing the data type of the field is INT).
    You can refer to the solution as
    Jingyang Li post above.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

Maybe you are looking for