Change Hostname, IP after IDM install

What are the changes in settings etc that need to be made after hostname/IP address of Host has been changed, which already had a OAM/OID/OIM existing install?
The managed servers are failing to start - hostname of the Host has been changed at OS level.

You must change
1. StartManagedWebLogic.sh
2. Recreate certificates (If you wish to start/stop services using Console)
3. tnsnames.ora in OID ORACLE_INSTANCE
If you share at what stage managed server are failing then I can share what to change and where

Similar Messages

Change Hostname/IP's on installed GI11.2.0.3

Hi,
Is it possible to change the Hostname/IP's nodes on installed GI11.2.0.3?
Exist some notes for do this action on "GI standalone" but no for GI.
Regards,
David.

Hi David,
Check this document.
How to Modify Public Network Information including VIP in Oracle Clusterware [ID 276434.1]
In that Document..
Changing public hostname
Public hostname is recorded in OCR, it is entered during installation phase. It can not be modified after the installation. >The only way to modify public hostname is by deleting the node, then add the node back with a new hostname, or >reinstall the clusterwar
Changing public IP only without changing interface, subnet or netmask
If the change is only public IP address and the new ones are still in the same subnet, nothing needs to be done on >clusterware layer, all changes need to be done at OS layer to reflect the change.
1. Shutdown Oracle Clusterware stack
2. Modify the IP address at network layer, DNS and /etc/hosts file to reflect the change
3. Restart Oracle Clusterware stack
Above change can be done in rolling fashion, eg: one node at a time.
Note : Keep forum clean by marking "helpful" or "answered" if you question is answered
Bala:)

Desktop shortcut icons change to Adobe after new install ...

Hi All -
Thanks in advance for your understanding if this has already been covered but after searching, I can't find a solution to my problem which very well may be something very simple. Btw, I'm a Vista user.
After installing Adobe Reader 9.xx or even an older version of 8.xx, many of the shortcut icons on my desktop change to the (white/red center) adobe icon with access to that program then unavailable as an error message comes up saying Adobe cannot access that program.
Anyone have any idea what I've done wrong or how to fix? After an uninstall of Adobe, the correct shortcut icons return with access working fine.
Thx in advance for any suggestions/fix -
Will in So. Cal.

not sure how comfortable you are editing your Registry. Please do a back of the Registry before you do the following:
1. Launch Notepad by clicking on Start > All Programs > Accessories > Notepad
2. Enter the following into Notepad:
Windows Registry Editor Version 6.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\OpenWi thList]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\OpenWi thProgids]
"exefile"=hex(0):
3. Click on the File Menu and select Save As
4. From the Save as Type drop down select All Files
5. Change the File Name to Exe.reg
6. Save the file to the Desktop and then close Notepad.
7. Double-click the Exe.reg file. Note: If you are prompted for an administrator password or confirmation, enter the password or provide proper confirmation.
8. Click Yes, and then click OK in response to the registry prompts.
9. Restart your Computer
10. You should be sure to delete the Exe.reg file after resolving this issue.

Mount point ownership changed to root after GI install

version:11.2.0.3
Platform : Oracle Enterprise Linus 5.6
I succesfully installed Grid infrastructure. RDBMS software is yet to be installed.
Following are the Software location variables for Grid Infrastructure.
ORACLE_BASE=/u01/grid
ORACLE_HOME=/u01/app/11.2.0.3/grid
After the succesful installation, I've noticed that /u01 mount point's ownership has been changed from oracle:oinstall to root:oinstall.
Is this normal ?

/u01 should be root:root.
/u01/app should be root:root.
I don't know why your top-level directory has oinstall as the group owner. That just seems wrong. I ran some tests and it allows grid to change and delete other people's directories located under /u01.
I recommend you change ownership of /u01 to root:root. Do not use the -R option because you don't want to mess up the sub-directories.

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

Hi,
Do not change the hostname after the installation, if you need to then you have to perform system copy.
Refer: Note 8307 - Changing host name on R/3 host: What do you do?
Regards,
SBK

My Safari will not allow me to open my Google calendar with Google Apps. I have to open my email with the older version of Google Apps. This happened after I installed 5.1.4. I tried to use the fix of changing to 64 bit by unchecking the 32 bit box no go

My Safari will not allow me to open my Google calendar with Google Apps. I have to open my email with the older version of Google Apps. This happened after I installed 5.1.4. I tried to use the fix of changing to 64 bit by unchecking the 32 bit box but that didnt help.

I assume that there are legal restrictions on the way in which iTunes can get artwork automatically from any source apart from the iTunes Store (which is what the right-click > Get Album Artwork function uses). For example, even though the Gracenote service that iTunes uses to match CDs and retrieve metadata (artist, album, track titles, etc.) also has artwork functions, iTunes does not make use of these.
For manual addition of artwork, there are three cases where the image you select may not be correctly embedded in your media files:
your media are in a format that doesn't accommodate embedded artwork - typically WAV files. To embed artwork you'll need to convert to another format - Apple Lossless or AIFF if you want to preserve lossless quality, AAC or MP3 otherwise.
your media files are read only - to fix this, use Windows Explorer to find the folder that contains your files, right-click and select Properties. On the General tab there's a check box labeled "Read-only" - if this is checked, or is grey (sometimes blue), click the box so that the flag is unchecked and the box is white. Click OK, and then OK again when the "Apply changes to this folder, subfolders and files" option selected. Now try adding the artwork again.
Windows permissions issues are preventing iTunes from updating your media files (there's some anecdotal evidence of a change in this behavior in iTunes 12). See turingtest2's notes on Repair security permissions for iTunes for Windows for advice on fixing this, then try adding the artwork again.

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

My MacBook Pro is running very hot after lion install. Are there any hardware changes that will help? What can I do to get it back to normal?

I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window elements to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

Ok thanks Linxup I would recommend posting in the respective forums for each of those software titles as opposed to the Creative Cloud Download & Install forum. The relevant forums are as follows:
InDesign - InDesign
Illustrator - Illustrator

How to change number of retries and delay before retrying after software install failure

I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

First, are you referring to packages or applications because the behavior is different.
Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
errors.
Jason | http://blog.configmgrftw.com

How to repair Open Directory Master after Changing Hostname

Summary:
How to repair Open Directory after Changing your Server's Hostname (see separate post)
Problem:
I had to change our server's hostname from a private hostname (server.name.private) to a public hostname (name.dyndns.org).
Procedure:
1. Precautions:
Since I was anticipating major dramas I tested the change of hostname on a clone ( I used Super Duper, and I very strongly advise everybody to heed this warning because a change of hostname will corrupt your server services, in particular Open Directory)
Second, I exported the network users from Server Admin and copied the archive to the Drop Folder of the server's local account (because the network accounts will be unavailable after demoting the OD Master.)
2. Change hostname and demote OD Master
a) I re-booted the server from the clone
b) I changed the hostname in Server App and I noticed that the Open Directory Password and the Kerberos database were still stuck with the old hostname.
c) I then demoted to a standalone directory (Server Admin) and I tried to promote the server to an OD Master using the Server App (Manage Network Accounts). Server App always returned an error saying I should check my network settings.
3. List of 'fixes'
I tried the following fixes to no avail (which does not mean that you can skip them)
a) I checked the DNS entries, forward and reverse were working fine (sudo checkip -changehostname)
b) Checked with Lookup in Network Utility, all was fine
c) I deleted all system certificates (Keychain) which showed the name of the previous hostname
( N.B. you need not delete email certificate and private/public keys)
d) I tried to assign a new static IP in Networking Preferences (had no visible result)
e) I re-booted from the working drive and I re-paired permissions on the clone; I ran disk repairs.
Despite all this I could not re-create an OD Master.
I then looked for this dubious folder /var/root/Library/Application Support/Certificate Authority.
I could not find this folder when using the Finder's Go To Folder, nor did "Easy Find" see this folder.
I was about to give up when I read the posts on this page and I entered the Terminal commands
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
I had not much hope when I set about to re-create the OD Master from the Server App.
But lo and behold !!! I did not trust my eyes when Server App claimed that the OD Master had been successfully created. And indeed, Server admin showed a running OD Master, LDAP, Kerberos and Password Server all running again !
Final touch: re-import the user accounts.
Epilogue:
I woud not have been able to fix this issue had not so many others shared their experience and the working solution.
(Refer : https://discussions.apple.com/thread/3219325?start=0&tstart=0 )
Thank you all !
Let's hope that Apple will fix this annoying issue in the next server update.
Regards,
Twistan

Hi Rhyan,
Please try clearing the security cache
http://www.sharepointanalysthq.com/2014/05/active-directory-groups-and-sharepoint-security/
https://sergeluca.wordpress.com/2013/07/06/sharepoint-2013-use-ag-groups-yes-butdont-forget-the-security-token-caching-logontokencacheexpirationwindow-and-windowstokenlifetime/
http://webactivedirectory.com/active-directory/windows-active-directory-cached-user-credentials/
Please remember to click 'Mark as Answer' on the answer if it helps you

Hi, after I installed IOS 7, my safari homepage is shown in Chinese. How to change it to English?

Hi, after I installed IOS 7, my safari homepage is shown in Chinese. How to change it to English?

Hi everyone,
I just ran across this issue myself. Very odd to say the least. The language seems fine everywhere except the "favorites" which appear when you open Safari without a current website open. (kind of similar to where a home page would appear). These are not the same as all of your bookmarks, they are more of a "bookmarks bar" equilvalent that you would see when opening a new tab.
I tried it all to fix this, only to find that Apple is currently investigating the issue.
For those having this issue, you can call AppleCare, (even if you are out of warranty, since this is an iOS 7 issue, atleast for US and Canada customers) to get assistance. 1-800-APL-CARE for US and Canadian customers. It seems Apple's Engineering team is collecting data on this issue right now, though I am not aware of exactly what is being employeed to fix it.
If you don't want to call AppleCare or visit an Apple Store, I will say from personal experience that all of the basic troubleshooting steps failed to fix this issue.
It seems you may want to consider creating an iCloud or iTunes backup. I would also strongly recommend that you sync with iTunes, transfer your purchases in iTunes, and import your camera roll to a computer. And then restoring your device as new using iTunes. And after the restore try restoring from your iTunes or iCloud backup. This should take care of it.
However in extreme cases, it can take restoring and setting up as a new device (and syncing all the data you can back instead of using any kind of backup) to resolve stubborn issues, when they are based in your settings or content.
I hope this helps a little.

Every time I click on Firefox a box pops up asking me if I will allow changes to my computer from firefox This started happening after I installed firefox 5

Every time I click on Firefox a box pops up asking me if I will allow changes to my computer from firefox This started happening after I installed firefox 5 e

Check that you do not run Firefox as Administrator. 
Right-click the Firefox desktop shortcut and choose "Properties". 
Make sure that all items are deselected in the "Compatibility" tab of the Properties window. 
* Privilege Level: "Run this program as Administrator" should not be selected 
* "Run this program in compatibility mode for:" should not be selected 
Also check the Properties of the firefox.exe program in the Firefox program directory.

I can't open iPhoto because it may be damaged or incomplete? It started after I installed iDvd so I uninstalled it. No change - what do I try next?

I can't open iPhoto anymore because "it may be damaged or incomplete"? I'd been making folders of my albums & videos & moving them to an external hard drive. I have years of photo's & video still on iPhoto that I had not moved to the external hard drive yet. This problem started after I installed iDvd so I uninstalled it. Also tried to download older iPhoto updates to see if that would resolve the problem. No change - what do I try next?

1. Back up:
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
2. Reinstall:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

PDF file association changes to use Acrobat after Acrobat installed

Hi,
I have packaged a silent installation of Acrobat X Professional using the Customisation wizard. We have to make Reader the default viewer (without using a script after the install). No matter which option I select for the default viewer in the customisation tool (as shown below), Acrobat X Professional becomes the default viewer. I am trying to add or modify the installer database table so that it leaves the current association with Reader.
Any ideas?
Thanks,
Simon

Hi,
That has done the trick, thanks! I found yesterday I could also use LEAVE_PDFOWNERSHIP=YES on the command line to achieve the result, however we wanted to add to the Property table of the MST. In the case of LEAVE_PDFOWNERSHIP=YES this did not seem to work, but with IW_DEFAULT_VERB=Read it is working well.
Thanks again,
Simon

Change Hostname, IP after IDM install

Similar Messages

Maybe you are looking for