Change Hyper-V 2012 R2 failover cluster management subnet

Hi,
We have an existing Hyper-V 2012 R2 Failover cluster. Virtual machines are live on this cluster. The networking team has decided to reorganise the network subnets. As a consequence we need to change the management IPs of our Hyper-V failover
clusters.
What are the possibilities?
Evect 1 node from the cluster, set correct management IP on the evicted cluster. Create a single-node cluster. Mask a new LUN to the single-host cluster. Execute a shared nothing live migration of the VMs which are hosted on old cluster.
Kr,

Hi Kr,
You can refer the following similar scenario article:
Changing Hyper-V Cluster Virtual IP Address (VIP) After Layer 3 Changes
http://blogs.technet.com/b/chrad/archive/2011/09/16/changing-hyper-v-cluster-virtual-ip-address-vip-after-layer-3-changes.aspx
Change IP address Hyper-V Cluster
http://bartvanvugt.blogspot.com/2012/01/change-ip-address-hyper-v-cluster.html
More related third party article:
Change IP address Hyper-V Cluster
http://bartvanvugt.blogspot.com/2012/01/change-ip-address-hyper-v-cluster.html
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Cannot migrate VM in VMM but can in Failover Cluster Manager network adapters network optimization warning

I have a 4 node Server 2012 R2 Hyper-V Cluster and manage it with VMM 2012 R2. I just upgraded the cluster from 2012 RTM to 2012 R2 last week which meant pulling 2 nodes out of the existing cluster, creating the new R2 cluster, running the copy
cluster roles wizard since the VHDs are stored on CSVs, and then added the other 2 nodes after installing R2 on them, back into the cluster. After upgrading the cluster I am unable to migrate some VMs from one node to another. When trying to do
a live migration, I get the following notifications under the Rating Explanation tab:
Warning: There currently are not network adapters with network optimization available on host Node7.
Error: Configuration issues related to the virtual machine VM1 prevent deployment and must be resolved before deployment can continue.
I get this error for 3 out of the 4 nodes in the cluster. I do not get this error for Node10 and I can live migrate to that node in VMM. It has a green check for Network optimization. The others do not. These errors only affect
VMM. In the Failover Cluster Manager, I can live migrate any VM to any node in the cluster without any issues. In the old 2012 RTM cluster I used to get the warning but I could still migrate the VMs anywhere I wanted to. I've checked the network
adapter settings in VMM on VM1 and they are the same as VM2 which can migrate to any host in VMM. I then checked the network adapter settings of the VMs from the Failover Cluster Manager and VM1 under Hardware Acceleration has "Enable virtual machine
queue" and Enable IPsec task offloading" checked. I unchecked those 2 boxes refreshed the VMs, refreshed the cluster, rebooted the VM and refreshed again but I still could not live migrate VM1. Why is this an issue now but it wasn't before
running on the new cluster? How do I resolve the issue? VMM is useless if I can't migrate all my VMs with it.

I checked the settings on the physical nics on each node and here is what I found:
Node7: Virtual machine queue is not listed (Cannot live migrate problem VM's to this node in VMM)
Node8: Virtual machine queue is not listed (Cannot live migrate problem VM's to this node in VMM)
Node9: Virtual machine queue is listed and enabled (Cannot live migrate problem VM's to this node in VMM)Node10: Virtual machine queue is listed and enabled (Live Migration works on all VMs in VMM)
From Hyper-V or the Failover Cluster manager I can see in the network adapter settings of the VMs under Hardware Acceleration that these two settings are checked "Enable virtual machine queue" and Enable IPsec task offloading". I unchecked those
2 boxes, refreshed the VMs, refreshed the cluster, rebooted the VM and refreshed again but I still cannot live migrate the problem VMs.
It seems to me that if I could adjust those VM settings from VMM that it might fix the problem. Why isn't that an option to do so in VMM?
Do I have to rebuild the VMM server with a new DB and then before adding the Hyper-V cluster uncheck those two settings on the VM's from Hyper-V manager? That would be a lot of unnecessary work but I don't know what else to do at this point.

I can't find failover cluster management after creating hyper-v cluster on SCVMM 2012 R2

I've created a hyper-v cluster on scvmm 2012 r2 but I can't find the failover cluster manager to move storage resources. all hosts are showing to have hyperv role and failover clustering feature installed. disk Witness in Quorum is good, same as for the
other CSV lun. Please help me Microsoft. Thank you.

The management consoles are not getting installed while building the cluster through SCVMM. However, its not mandatory to have the management tools on the server. You can have it on a different machine with this management tools installed and connect to
this cluster remotely.
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

How to recover from accidental VM role removal in Hyper-V Failover Cluster Manager?

Hello
My VMs are still available in Hyper-V Manager but they are no longer available in Cluster Manager. I am curious if there's a way to move them back into the Failover Cluster Manager while retaining their GUIDs?
I know I can manually create a new VM and add the existing VHD but that process recreates a new GUID causing the VM to regard the stuff I wanted as old.
I have tried to follow
http://blogs.technet.com/b/heyscriptingguy/archive/2013/10/14/recovering-virtual-machines-in-hyper-v-server-2012-r2-part-1.aspx but I am curious if there's a faster way to do this without becoming a scripting genius overnight.
Thanks,
Prince

Thanks for the reply but that does not help.
I am not looking to move my VMs to a remote Host but rather looking to repopulate the fail-over cluster manager with the existing VMs in Hyper-V Manager. In a sense, I am looking to reuse the existing GUID without creating new ones.
Again, my VMs are alive in Hyper-V Manager but are currently not available in Failover Cluster Manager.
Any scripting assistance will be greatly appreciated.
Thanks,
Prince

Failover Cluster Manager 2012 Showing Wrong Disk Resource - Fix by Powershell

On Server 2012 Failover Cluster Manager, we have one Hyper-V virtual machine that is showing the wrong storage resource. That is, it is showing a CSV that is in no way associated with the VM. The VM has only one .vhd, which exists on Volume 16.
The snapshot file location and smart paging file are also on Volume 16. This much is confirmed by using the Failover Cluster Manager to look at the VM settings. If you start into the "Move Virtual Machine Storage" dialog, you can see
the .vhd, snapshots, second level paging, and current configuration all exist on Volume 16. Sounds good.
However, if you look at the resources tab for the virtual machine, Volume 16 is not listed under storage. Instead, it says Volume 17, which is a disk associated with a different virtual machine. That virtual machine also (correctly) shows Volume
17 as a resource.
So, if everything is on Volume 16, why does the Failover Cluster Manager show Volume 17, and not 16, as the Storage Resource? Perhaps this was caused by an earlier move with the wrong tool (Hyper-V manager), but I don't remember doing this.
In Server 2003, there was a "refresh virtual machine configuration" option to fix this, but it doesn't appear in Failover Cluster Manager in Server 2012.
Instead, the only way I've found to fix the problem is in PowerShell.
Update-ClusterVirtualMachineConfiguration "put configuration name here in quotes"
You would think that this would be an important enough operation to include GUI support for it, possibly in the "More Actions" right-click action on the configuration file.

Hi,
Thanks for sharing your experience!
You experience and solution can help other community members facing similar problems.
Please copy your post and create a new reply, then we can mark the new reply as answer.
Thanks for your contribution to Windows Server Forum!
Have a nice day!
Lawrence
TechNet Community Support

Hyper-v Failover Cluster management via powershell

Hi
We are looking at having a management server act as proxy for managing couple of hyper-v clusters using CSV. We plan to do management using powershell commands.
We create a session one of the host in the cluster and execute commands using invoke-command. The cluster verbs seems to fail with the following warning.
WARNING: If you are running Windows PowerShell remotely, note that some failover clustering cmdlets do not
work remotely. When possible, run the cmdlet locally and specify a remote computer as the target. To run the
cmdlet remotely, try using the Credential Security Service Provider (CredSSP). All additional errors or
warnings from this cmdlet might be caused by running it remotely.
What is the recommended way to do setup for using FailoverCluster ? We want to have a single management server that act proxy for all servers clustered or not.
Also, is there a document that describe various operations done via Failover Cluster Manager and corresponding powershell commands (or set of commands).
Thanks
/Jd

Regarding the Stop action from Failover Cluster Manager, Eric, I understand your point. But when I do shutdown from Failover Cluster Manager, the VM shuts down as expected even when the setting is set to Save.
I was very specifically talking about the Stop-ClusterGroup cmdlet, not any command issued in Failover Cluster Manager. But, well, yeah, if you tell a VM to shut down, it shuts down. I don't know why you'd expect anything different to happen. If you're looking
for the equivalent to Stop-ClusterGroup inside Failover Cluster Manager, it's not called "Shut Down". You can use "Stop Role" on the "More Actions" menu for the VM. You can also find the configuration object (usually named in the format of "Virtual Machine
Configuration XXX") and take it offline.
I tested a number of times after your first post, and Stop-ClusterGroup does what the Cluster-Controlled Action is set to every single time for me.
I could only make educated guesses at the underlying mechanics of FCM and PowerShell's cluster cmdlets, but the stand-out difference is that FCM has no method to operate in a double-hop situation at all, while PowerShell does. You only encounter these difficulties
with PowerShell in that second hop. The question you're asking: "it would be great to know how Failover Cluster Manager works without this setup ?" is an apples-to-oranges comparison.
This particular sentence of yours sort of changes the overall parameter of your question:
"... so our automation works..."
I was under the impression you were setting up this double-hop because you wanted admins to manually execute PowerShell cmdlets against your cluster from a single controlled location.
If automation is your goal, do it right from the cluster. I obviously don't know your entire wishlist and it's none of my business, but this double-hop situation may not be ideal.
Eric Siron Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
"Every relationship you have is in worse shape than you think."

Hyper-V internal (1 of 2, NOT Cluster) network unavailable in Failover Cluster Manager 2008R2

Hi all,
I had a very strange situation in my Hyper-V 2 nodes-cluster:
I have one networtk for HertBeat only (10.0.0.0/24) and second for HyperV internal networking for virtual machines (In properties marked "Do not allow clustern network communication")
Machines were working properly and any migration too.
One day, my secon done HyperV2 was marked red in Failover Cluster Manager mmc. I discovered that HyperV LAN is unavailable on this second node. BUT everything war working properly - HyperV2 node was on internet, communicated to AD domain, even culd run any
virtual machine...
Several times I checked the configuration, also check TMG configuratio, I was wondering if it can not be wrong settings on network access rule, I tried to restart this host - no result, ... network was still unavailable.
After about a hour I found the resolutuion:
On my second Hyper-V node Disable / Enable Local Area Connection network adapter, connected to Hyper-V LAN in Network Connections control panel!
Hope this will help to somebody ;)
Marian, just trying to help you

Resolutuion:
On affected Hyper-V node Disable / Enable Local Area Connection network adapter, connected to Hyper-V LAN in Network Connections control panel
I guess, sometnig flush on network configuration and / or some combination with network adapter driver
Marian, just trying to help you

Change "Services and applications" names in failover cluster manager

Hi. Id like to change "Services and applications" names in failover cluster manager for Windows Server 2008 R2.
I right click on one and press rename, but when i change the name and press enter i get the message "To rename this service or application please rename the Client Access Point via its property page"
It's important that we don't change the network name for the service

Hi,
Checkout this blog post
PowerShell for Failover Clustering: Let’s Rename a Few Things
But keep in mind if you rename the resources and you are using them in a script or backup you need to check this also with the new name.
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you

CSV V/s Pass through disks with HV 2012 R2 failover cluster

Hi
We are using HV 2012 R2 failover cluster with CSV. We found some articles saying pass through disks outperforms CSV. Is this correct?
Regards
LMS

Hi
We are using HV 2012 R2 failover cluster with CSV. We found some articles saying pass through disks outperforms CSV. Is this correct?
"The juice isn't worth the squeeze" (c) ...
Tim is 200% correct here: any performance gains (if any...) you'll get will fade in darkness compared to management burden you'll have with pass-thru disks (issues with failover, VM migration and no
real support with a major VM backup vendors). Making long story short: don't do it.
StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

2008 R2 SP1 failover cluster, after connect to VM from failover cluster manager console I've get only upper quourter of screen console

Hello :)
I have to ask because this issue is boring me a long time ago :(
From time to time when I connect to virtual machine from failover cluster manager console I've get virtual machine connection screen (console) which is reduced only to upper left quorter of full screen. There is no scroll bar ... If I live migrate
VM to another node (or restart VM on same node) and reconnect, console screen is displayed ok (ie all console screen is visible).
It is happening regardless of OS version installed into guest VM: 2003 R2, 2008 R2, 2012, 2012 R2).
I've check inside VM ( I can see that integration services are installed and running but when I click onto console window with mouse I've get message:
"Virtual Machine Connection
Mouse not captured in Remote Desktop session
The mouse is available in a Remote Desktop session when
integration services are installed in the guest operating
system...."
From SCVMM console I can see that IC version on guest VM is: 6.1.7601.17514
I would like to know what is going on and is there any way how can I detect those situation or even better how to prevent it ?
Thank you for any idea.
Best regards
Nenad

Hi Nenad,
As you mentioned you have tried 2003 R2, 2008 R2, 2012, 2012 R2 guest vm, but all this do not work properly, With Server 2003 platform the 2008r2 Hyper-V the 2003R2 are not
supported, in your case you must update to Windows Server 2003 R2 with Service Pack 2.
Server 2012 as guest vm on 2008r2 you must install the following hot fix:
You cannot run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
https://support2.microsoft.com/kb/2744129?wa=wsignin1.0
Server 2012 is the last version of Windows that will be supported as a guest operating system on 2008r2 Hyper-V therefore the 2012r2 guest vm is not supported.
Please use the following command can query all guest vm’s IC version, please compare this problematic vms IC version with functioning vms.
The following powershell command can be used to display the version of integration services installed on all VMs on the Hyper-V host:
PS C:\Users\administrator> get-vm | ft name, IntegrationServicesVersion
Name
IntegrationServicesVersion
TestVM2012
6.2.9200.16433
SQL01
6.2.9200.16433
SQL02
                                  6.2.9200.16433
SCVMM01
6.2.9200.16384
SCVMM02
6.2.9200.16384
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Monitor Replication Health in Failover Cluster Manager?

Have two Hyper-V 2012 R2 Clusters.
One Cluster contains all production VM's.The second cluster is on another location and is intended only for HA purposes. All production VM's from the first clusters should be replicated to the other cluster.
What is the best way to monitor the replication health of all VM's? In Failover Cluster manager, it's not possible to add a column "replication health" to the "roles" window. It's not practical to click on every VM to view the replication
health. In Hyper-V Manager, it's easy to add "replication health" to the virtual machine window, but clicking on every host to verify the replication health is not very practical as well.
Thank you in advance for any hint (I know that we could use SCOM or something similar, but these complex tools are out of scope).
Franz

Hi FranzSchenk
I think the only real option open to you is the use of PowerShell in your situation. Have a look at this link and see if this is the sort of thing that will help you.
http://www.serverwatch.com/server-tutorials/checking-hyper-v-replication-health-using-powershell-cmdlets.html
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Missing a VM in Failover Cluster Manager

We did eventually cut the power when shutting down the second of the two hosts in the cluster, because it got stuck at some stage during shutdown. The reason we shut down was that there were problems piling up while we moved VMs between the two nodes.
After boot, we no longer see one of the virtual machines in the Failover Cluster Manager. In Hyper-V Manager we see it, and it runs just fine.
How can we add the missing VM back in Failover Cluster Manager? Is there a simple way?
All the servers are Win 2008 R2.
Maybe a simple question - I don't know - but we just don't have enough knowledge right now, nor has searching the net resulted in anything useful. Appreciate a bit of help holding our heads above water while we learn to swim.
Bent Tranberg

You mean what I see in Cluster Events in Failover Cluster Manager? I saved it, opened it in Event Viewer, and saved it as tab delimited text. Is that ok?
I have removed the text after the event IDs whenever the text was exactly identical to the preceding event with the same event ID, to shorten my post. I also cut away a long list of repetitive events where you see the ellipsis'.
Level Date and Time
Source Event ID
Task Category
Error 05.01.2012 10:25:15
Microsoft-Windows-FailoverClustering
1205 Resource Control Manager
The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
Error 05.01.2012 10:25:15
Microsoft-Windows-FailoverClustering
1069 Resource Control Manager
Cluster resource 'Cluster IP Address' in clustered service or application 'Cluster Group' failed.
Error 05.01.2012 10:25:15
Microsoft-Windows-FailoverClustering
1049 IP Address Resource
Cluster IP address resource 'Cluster IP Address' cannot be brought online because a duplicate IP address '10.10.1.16' was detected on the network. Please ensure all IP addresses are unique.
Error 05.01.2012 10:25:07
Microsoft-Windows-FailoverClustering
1069
Error 05.01.2012 09:24:43
Microsoft-Windows-FailoverClustering 1205
Error 05.01.2012 09:24:43
Microsoft-Windows-FailoverClustering
1069
Error 05.01.2012 09:24:43
Microsoft-Windows-FailoverClustering
1049
Error 05.01.2012 09:24:35
Microsoft-Windows-FailoverClustering
1069
Error 04.01.2012 14:04:33
Microsoft-Windows-FailoverClustering 1205
Error 04.01.2012 14:04:33
Microsoft-Windows-FailoverClustering
1069
Error 04.01.2012 14:04:33
Microsoft-Windows-FailoverClustering
1049
Error 04.01.2012 14:04:25
Microsoft-Windows-FailoverClustering
1069
Error 04.01.2012 14:04:25
Microsoft-Windows-FailoverClustering
1049
Critical 04.01.2012 13:59:40
Microsoft-Windows-FailoverClustering
1135 Node Mgr
Cluster node 'VSH2' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a
Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected
such as hubs, switches, or bridges.
Error 04.01.2012 13:06:52
Microsoft-Windows-FailoverClustering
1205
Error 04.01.2012 12:00:38
Microsoft-Windows-FailoverClustering 1205
Error 04.01.2012 12:00:38
Microsoft-Windows-FailoverClustering
1069
Error 04.01.2012 12:00:37
Microsoft-Windows-FailoverClustering
1049
Error 04.01.2012 12:00:25
Microsoft-Windows-FailoverClustering
1069
Error 04.01.2012 12:00:25
Microsoft-Windows-FailoverClustering
1049
Critical 04.01.2012 11:54:36
Microsoft-Windows-FailoverClustering
1146 Resource Control Manager
The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource
vendor.
Error 04.01.2012 11:54:36
Microsoft-Windows-FailoverClustering
1230 Resource Control Manager
Cluster resource 'SCVMM AP Configuration' (resource type '', DLL 'vmclusres.dll') either crashed or deadlocked. The Resource Hosting Subsystem (RHS) process will now attempt to terminate, and the resource will be marked to run in a separate monitor.
Critical 04.01.2012 11:49:35
Microsoft-Windows-FailoverClustering
1146
Error 04.01.2012 11:49:35
Microsoft-Windows-FailoverClustering
1230
Critical 04.01.2012 11:44:33
Microsoft-Windows-FailoverClustering
1146
Error 04.01.2012 11:34:23
Microsoft-Windows-FailoverClustering
1205
Error 04.01.2012 11:34:23
Microsoft-Windows-FailoverClustering
1069
Error 04.01.2012 11:34:23
Microsoft-Windows-FailoverClustering
1049
Error 04.01.2012 11:24:22
Microsoft-Windows-FailoverClustering 1069
Critical 04.01.2012 11:24:22
Microsoft-Windows-FailoverClustering
1564 File Share Witness Resource
File share witness resource 'File Share Witness' failed to arbitrate for the file share '\\sm\QuorumFolder_Do_Not_Delete'. Please ensure that file share '\\sm\QuorumFolder_Do_Not_Delete' exists and is accessible by the cluster.
Error 04.01.2012 11:24:21
Microsoft-Windows-FailoverClustering
1069
Warning 04.01.2012 11:24:21
Microsoft-Windows-FailoverClustering
1562 File Share Witness Resource
File share witness resource 'File Share Witness' failed a periodic health check on file share '\\sm\QuorumFolder_Do_Not_Delete'. Please ensure that file share '\\sm\QuorumFolder_Do_Not_Delete' exists and is accessible by the cluster.
Error 04.01.2012 11:23:39
Microsoft-Windows-FailoverClustering
1069 Resource Control Manager
Cluster resource 'SCVMM vs2005Bent' in clustered service or application 'SCVMM vs2005Bent Resources' failed.
Error 04.01.2012 11:19:39
Microsoft-Windows-FailoverClustering
1069
Error 04.01.2012 11:19:19
Microsoft-Windows-FailoverClustering
1069
Critical 04.01.2012 11:05:36
Microsoft-Windows-FailoverClustering
1135 Node Mgr
Cluster node 'VSH2' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a
Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected
such as hubs, switches, or bridges.
Critical 04.01.2012 10:48:51
Microsoft-Windows-FailoverClustering
1135
Critical 04.01.2012 10:41:47
Microsoft-Windows-FailoverClustering
1135
Error 04.01.2012 10:33:51
Microsoft-Windows-FailoverClustering
1205
Error 04.01.2012 10:33:51
Microsoft-Windows-FailoverClustering
1069
Error 04.01.2012 10:33:51
Microsoft-Windows-FailoverClustering
1049
Error 04.01.2012 08:33:10
Microsoft-Windows-FailoverClustering 1069
Error 04.01.2012 08:33:10
Microsoft-Windows-FailoverClustering
1049
Bent Tranberg

Failed VM in Failover Cluster Manager

We have a problem that seems to be caused by 3 VMs in our cluster that have failed.
The cluster is a server 2012 R2 cluster.
The VMs are not in Hyper-V anymore, but they still appear in the Failover Cluster Manager. We have tried removing each VM and we receive the following error message, "The file cannot be opened because it is in the process of being deleted."
We have tried moving the failed VM to another server in the cluster but receive the same message.
Is anyone aware of a way to manually delete a specific VM from a cluster or know a solution to our problem?
Thanks

Hi,
Just want to confirm the current situations.
Please feel free to let us know if you need further assistance.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCVMM created VMs not displayed in Failover Cluster Manager

I have a 2012 Hyper-V failover cluster setup and recently added SCVMM 2012 SP1 to the mix so I could perform some P2V migrations and familiarize myself with its other many capabilities. I noticed that if I create a VM inside SCVMM it doesn't show up in the
FCM UI with the other VMs I created from FCM. VMs that you create in FCM do get picked up by SCVMM however. Is this by design?
Thanks,
Greg

For my issue above, this was because I'd not noticed and thus not ticked the box on the Live Migrate wizard that says "Make this VM highly available".
I moved the VM out of the cluster, manually deleted the failed "SCVMM <VMName> Resource", then moved the VM back onto the cluster again but this time ticking the box to make the VM highly available. All looked fine in failover cluster manager.
I do rather wonder why SCVMM designers think I might want to migrate a VM onto a Hyper-V cluster and NOT want it to be highly available...? Likewise, to be able to move the VM back out again to a standalone host once it's correctly in the cluster, you have
to untick the "Make this VM highly available box". Surely this should just be done automatically in the background?

Ghost VM resources under failover cluster manager roles

Hello, everyone,
I had a Windows 2012 R2 hyper-v host with few VMs running on it. I deployed a second host, and using SC VMM created a failover cluster. Also I added a shared cluster volume and migrated all VMs to the shared storage using SC VMM console. In
the process I also checked the checkbox to make the VM highly available. Everithyng worked fine.
Now when I look in to Failover Cluster Manager console I see some "ghost" vm roles. Their names are correspondend to the names of the running VMs, which I also can see in the console. For example I have vm HDCADC01, there is another
role in the console "SCVMM HDCADC01 Resources", the status is off, settings are empty.
Does anyone knows what are these resources? Is it somekind of glitch during the migration? Is it safe to remove them?
Thank you,
Jamal.

Where should I run this command?
On my VMM server Update-clustervirtualmachineconfiguration command complains that The cluster services is not running.
On the one of hyper-v server, cluster nodes, "get-vm -name hdcadc01" returns "Get-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name hdcadc01". The same result is when I used "ghost" resources name.

Change Hyper-V 2012 R2 failover cluster management subnet

Similar Messages

Maybe you are looking for