Change Ibook g4 display

Hello Everyone,
I'm a newbie!
Un fortunately yersterday I broke my Ibook Display, it works but It have some slivers on..
Can somebody help me on How to change the display?
thanx!
Marcello

There is a less complex way to fix the screen. Here are a couple of sites showing the procedure:
http://www.flickr.com/photos/giona/sets/72157594243899933/
http://www.instructables.com/id/DIY---Replace-Broken-Laptop-LCD/
Good luck!
John

Similar Messages

Is it possible to change what is displayed in the GAL in Exchange 2013

We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
[email protected] listed under email address it will now show the UPN as alias and
[email protected] for email.
I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
Is this possible, and if so how?

We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
[email protected] listed under email address it will now show the UPN as alias and
[email protected] for email.
I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
Is this possible, and if so how?
You can use the Details Template to change what the GAL shows.
http://technet.microsoft.com/en-us/library/jj673049(v=exchg.150).aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

(FM8p277) Crashes when saving first doc in book after changing conditional text display

That was a mouthful :-)
Okay, this happens with any of the books that I work on --- it never happened with Frame 7.
I have a book containing several documents.
The documents contain several conditional text segments.
Start new Framemaker session, open book, open all documents.
Change conditional text display (from Show All to Show Selected, or vice-versa).
From the book, choose Save All (or from the *first* document, choose Save). The following text appears in a 'FrameMaker dialog': "File <filename of first document>.fm has changed on the disk since you last opened or saved it. Someone else has probably modified the file. Do you want to save it anyway?
Click OK. All of the files save properly. (If I had clicked Cancel, the first file would be skipped and all other files would save.)
Change conditional text display again (note: this could even be for a different book at this point, I believe, but will have to verify).
(Repeat step 3): The same text appears again in the dialog.
Click OK. FrameMaker crashes while trying to save the first file. (If I had clicked Cancel, the first file would be skipped and all other files would save. However, if I attempt to save the first file afterward, FrameMaker still crashes.)
Anybody have any insight into this? Am I the only one this happens to? Argh :-)
Thanks.

Sorry, the only answers I got were on the forum and nothing worked
That being said, at least now I know I'm not crazy! (Sorry it had to
happen to you, though.)
As it stands, I've been training myself to make sure that after the
first time I toggle the settings, I do the save, and then make sure to
save all, quit, and restart FrameMaker before I attempt another toggle.
On the odd occasion that I don't do that and get the warning message, I
select Cancel (which lets the rest of the files save), quit, restart,
and then make sure I update the first document appropriately.
All the while cursing and swearing, of course
As an aside... if you find a solution, please let me know about it if
you remember.
Thanks.
John

How to change the number displaying rows in a table

Hi all,
i have a table for resources in Debrief Work order (Standard Screen), we need to change the default displaying rows. inistially it displayed 3 empty rows.
i tried to change the Records Displayed for the table but it did not affect.
also it is possible to change the "Add 3 rows" button in the table to add for example 5 rows instead?
any idea?
Regards,
Mahdi Charara

Hi,
Through personalization we can do.On standared page top right u will find personalization link.click on the clink next expand all there find apporiate table .Here u will fine reorder button set as u want display and save. then u can see the change.For add row functionality u need to extend the co.

Will migration assistant change the default display settings on my new Mac?

I just set up a new iMac and used Migration Assistant to load from my Time Machine. But now the display looks muted and not as bright. Would Migration Assistant change the default display settings on my new Mac?

Migration Assistant may not be the cause. But you should reset the NVRAM and see it that fixes the issue.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

How to make the Business Area field from Change Mod to Display Mode in AS02

Hi Gurus,
I created a Customized T-code YAS02 for making the Business Area in Display mode with the help of SHD0.
But my client wants to do the same in standard T-code of AS02 and they don't like to use the customized T-code.
Kindly advise to make the Business Area from Change Mode to Display Mode in AS02.
Thanks in advance...
regs / Devi Aparna

Hi Devi,
check the following customization
asset accounting -> Integration with the General Ledger> Additional Account Assignment Objects-> Activate Account Assignment Objects---
Regards,
Ranjith

LPA Reporting iView - Can we configure or change the table display?

Hi all...
We are using the Reporting Launchpad in MSS. It is using the LPA reporting application to display an employee selection for headcound reports, etc. The table lists employee, id, and 'P'. It is limited to 5 entries. Is there any configuration change this table display?

Hi 640,
I just checked it. You cant do it directly in Answers (the css property for the PTCOL2 is going to be the same and I'm not sure how you could assign different div id for it without going through source files). What you could do is create 2 pivot table views and put them side by side in Compound view. Might be tricky, but possible.

Change my BBM display name

I have a new Passport. Could someone please help me to understand how to change my BBM display name.
Thank you in advance
Ron

open BBM app, tap on top where name is and then tap on name to change it
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

ICS 2.x: How do I change the hour display format from AM/PM to 24 hour mode in the JavaScript?

How do I change the hour display format from the AM/PM mode to the 24 hour mode
in the JavaScript?

To change the hour display format, 

<OL>
<LI>Open the loadpoint/CalendarServer/cal/uicust/en/main.html
file.

<LI>Go to the "Misc." section.

<LI>Edit the following line: 

i18n['def clock'] = '24';
</OL>

laugh
how analog.
neat idea, but i need to see that part of the screen after login on a fairly regular basis, otherwise i might seriously do this.

Resolution changed on remote display. Fan runs at HIGH speed.

Today, for no reason, resolution changed on remote display. Option needed no longer shown. Tried SMC and PRAM resets. Now resolution on the MAC AIR is messed up (not full screen) and the fan runs at HIGH speed. This is a sudden change. Have been using the MAC Air in this exact configuration for 2 years. Tried restart/reset of monitor. Nothing. Did resets on MAC and screen changed there. Also the fan runs at high speed.

Hi donaldfromsaint charles,
It seems you are experiencing an issue with displays and their resolutions. The following article provides troubleshooting guidance which may help you find a solution:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Screen Share - Change what to display & video quality

Hi LCSS Team,
I have been playing around with screen share and have it working in collaborative (both ends can share/control their screens).
Upon initial selection of deskop/app/window, is there a way to allow users to change what to display without having to
start/stop?
Use case:
- User A is viewing user B screen. User B would like to change view from desktop to a specific window.
Also, the screen share video feed is very pixelated. I have tried it multiple settings including what you guys sent
me. I am trying to get it to Skype like quality. Is that even possible?
Thanks,
Michael

Hi octoguy,
iChat makes hardware and connection speed checks as it starts up.
This gives you the framerate and bit rate duirng a call.
Lets say that your processor gives your iChat 15 fps
This will be the rate that you will then see to a another Mac.
The same computer is likely to get 10 frames per sec to a PC.
This is some part due to the PC putting a fair amout of effort into producing a clear detailed pic.
On some PCs this setting for the video pic is so high that the audio will drop out completely.
The cure is to bring the PC preview to the front (tabs)
Then click on the small icon that appears to the right and adjusting the slider that appears to the left.
This will incease the frame rate and bit rate from the PC. It makes the video look smoother although the actual quality has gone down (you may not be able to judge this quality difference by eye)
As general rule you will get about 2/3rds of the normal Mac to Mac framerate shown in the Connection Doctor. It also seems to take about 50% more Connection speed to get the same quality video.
So Mac to Mac min is 100Kbps where as Mac to PC will need about 150kbps.
The quality drop from 15 frames a sec to 10 frames a sec does make the video generally more blocky but does also depend a fair bit on the processor power of the PC and the camera used.
I know that sounds a little vague but there are really many variables that can be a factor.
11:23 PM Monday; April 24, 2006

My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal.

My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal functioning. I have adjusted the delay times before the computer goes to sleep to no avail, so I'm thinking this issue stems from something else.

Have you tried resetting the PMU? The PMU (Power Management Unit) has control over the sleep function, so resetting it may help if the iBook is sleeping unexpectedly.

I received a new iBook G4 display but it does not fit in the board?

I ordered an iBook G4 display for an iBook G4 and set out to install it but the display has a 6-pin inverter cable while the logic board looks like it only receives a 4-pin cable.
Is there any way around this? Why do the displays have different pins?

No, I got the right display, Apple designed it wrong.
I have all the parts to an iBook G4 and they're all stupidly incompatible. I have a G3 screen with a completely different connector. I ordered a A1055 logic board and got a 14" board (for a 12"). Because Apple gives boards the same part number (whether they are 12" or 14").
I have two G4 logic boards with 4 pin inverter cable ports and 2 displays with 6 pin inverter cable input.
You can put a 4 pin inverter cable into a 6-pin inverter port. I'm going to cut 2 pins off of the inverter connector with an exactoknife and see if it works because this is ridiculous. I have all these parts and cannot even make 1 working laptop.

I would change the language displayed in the login window from u.s. to german

I would change the language displayed in the login window from u.s. to german in Lion (Mac OS X 10.7.2).
I use
sudo "/System/Library/CoreServises/Language Chooser.app/Contens/MacOS/Language Chooser"
Then I enter my admin password and choose german. It doesn't work
Then I use
sudo languagesetup
Then I enter my admin password and type 4 for german. It doesn't work
Still I habe the language u.s. at the login windows.
In the terminal appears following message:
System Language set to: German
2012-01-06 16:18:43.401 languagesetup[311:707] Warning: NSBundle NSBundle </System/Library/CoreServices/Language Chooser.app> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
What shell I do? Can you help me??

I found the solution!
One of the User in my MacBookPro was saved with an old version of FileVault. I deaktivated this old FileVault and aktivate the new FileVault and the language of the login Windows is sudenly german!

Creating or change Content to Display on Portrait Mode

I would like to Create or change Content to Display on Portrait Mode ?

I do a custom sequence, where say my media is 1920 x 1080, I make the sequence 3414 x 1920. Then move the clip into the sequence and 'Keep Existing Settings', and rotate the clip 90 degrees. You can fit 3 clips of those dimensions within those settings and leaves a 'black' portion. Or scale one clip to fill.
Depends what size media you have and depends what you want to render out as.

Change Ibook g4 display

Similar Messages

Maybe you are looking for