Change icon & time of the documets display

How to Change icon & time of the documets display
I think Portal's icon is not good to look.
I also want Lastmodified time to display date.How to do it?
thanks for your help.
points Awards

Hi Han,
the icons are saved under /etc/public/mimes/images
You can go to KM Content and upload there your own icons and either you replace the SAP standard name (ie: document.gif) what I would not recommend or the better solution would be to change the KM Configuration (Content Management -> Utilities -> Icons) so that your own icons are associated with some MIME types.
To change the format of the last modified property go to KM Configuration -> Content Management -> Global Services -> Property Metadata -> Properties. Search for "cm_modified". You could change the property type to "Date" but the solution I would prefer is to add following string in the parameter "Additional Metadata":
customFormat=MM/dd/yyyy or customFormat=dd.MM.yyyy
Hope this helps,
Robert

Similar Messages

Change field catlog after the first display

Hello,
I am trying to change field catlog after the first display.
Problem I am facing is at runtime fild catlog is not changing. Could some one suggest where I might have gone wrong.
Thanks in advance.
Regards,
Vimal.
IF sy-ucomm = 'CATLOG'.
    CALL METHOD g_alv_grid->get_frontend_fieldcatalog
      IMPORTING
        et_fieldcatalog = it_fieldcat[].
    LOOP AT it_fieldcat INTO str_fcat .
      IF str_fcat-fieldname = 'EBELP' .
        str_fcat-hotspot = 'X' .
        MODIFY it_fieldcat FROM str_fcat .
      ENDIF .
    ENDLOOP .
    CALL METHOD g_alv_grid->set_frontend_fieldcatalog
      EXPORTING
        it_fieldcatalog = it_fieldcat[].
ENDIF.

In that You change the Field catalog and
call this method..
CALL METHOD G_GRID->REFRESH_TABLE_DISPLAY
    EXCEPTIONS
      FINISHED = 1
      OTHERS   = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
try this...

Any way to show more than two slides at a time on the secondary display?

During a presentation, is there any way to show more than two slides at a time in the secondary display? Sometimes during a presentation i have to go back to a certain slide without notice (usually no more than ten slides behind or in front of the current slide)
Thanks in advanced...

Nope. But you can jump around easily enough. Just type in the number of the slide you want (or any number, really, because you can then use the arrow keys to scroll to the correct slide), and hit return.

Change Icon missing in the existing SC in ITS URL

Hi Gurus
User is trying to change some details in existing SC, user is able to find the SC in Check status and clicked the details button it will display the document item details, but the Change Icon is missed for the user.
Until last week, user was able to make changes before the cart was approved, also I verified the change details in SU01D, and nothing has been changed.
Also I verified my user ID in testing client, I am able to see the change Icon .
Please advice
Thanks & Regards
Sada

Hi,
Please check the value of the parameter BBP_WFL_SECURITY in trascn PFCG for the EMPLOYEE role. See whether that is set to value low/medium/high so that the employee sees the CHANGE button.
BR,
Disha.
Do reward points for useful answers.

Changing Icons (After reading the Mac 101 Topic)

I'm trying to change icons on my hard drive. The problem lies in the icon in which I am going to replace the default icon with. When I go to the "Get Info" section of the icon, the image in the top left corner is the generic ".gif" file icon or the generic ".tif" file icon, instead of the actual image itself. Therefore, when I copy that file icon, it copies that generic ".gif" file icon onto the hard drive. But when I get info on other default mac icons (such as a folder), I see the folder icon in the top left corner.
The crux of my question is: how do I have the actual image show up in the top left corner of the "Get Info" section of the icon?
Thanks.
Powerbook G4 Mac OS X (10.4.9)

You can either create an actual builtin thumbnail for the file, using an Automator action or a third party utility, or simply open the file in Preview and copy it there, then do GetInfo on the drive, select the wee little icon, and paste.
Francine
Francine
Schwieder

Change icon size from the on-off power button

Can you help me to decrease the size of icons on my iPhone 4 because I am not able to use the phone right now?

You have Zoom on... double tap with three fingers to turn it off. Go into Settings > General > Accessibility to disable it.
See p. 243... http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

Changing icons back to the old ones

I just updated my Ipad to the new system and the new look is VERY disturbing. How can I change back to the old look or uninstal the new system?

you can't do either option.

How can I change the name displayed in the "TO" field of Mail.

Recently, all incoming email now displays the name of a family member in the "TO" field. I have checked mail preferences and the email account information has not been changed. How can the name displayed in the TO: filed be changed?

.. sounds like you created your Mail account with your family member's name but used your email address wen you created the account.. check your Mail/Preferences/Account then check System Preferences/iCloud or System Preferences/MobileMe

When i try to change icon to Firefox, when i press change icon it give me the IE ones not Firefox ones? How can i get it back to firefox icons?

When you press properties then change icon, instead of the 3 firefox ones you normally see, it give me the IE ones, how can i get the firefox ones back, Firefox beta 4 is my default.

Click Properties > Change icon > Browse > (the folder where you install your Firefox, usually in Drive C:) > Firefox.exe
The 3 Firefox ones you normally see should be listed.

How to change system time w/o affecting iCal

When I travel to another time zone with my laptop I would like to be able to change the system time that appears in the menu bar to the local correct time. However, I do NOT want this to cause any changes in my calendar times. I use Calendar only for my home appointments so do not want those to change. Is this possible? Thanks!

Hey bobio,
Thanks for the question. If I understand correctly, you want to change your time on the computer but not the time on the Calendar. I would recommend that you read this article, it may be able to help the issue.
You can change the computer time and follow this to view Calendar events in your normal time.
Calendar: View all your events in a different time zone
By default, Calendar events are displayed in your computer’s current time zone (set in Date & Time preferences).
Thanks for using Apple Support Communities.
Have a good one,
Mario

Changing Icons & Reverting to Old?

Can someone please explain how to change icons on both the dock and desktop as well as a good site with cool new icons?
Also - if I change an icon, how do I go about reverting to the old one?
Thanks.

click on the icon or folder...
Press Apple+i
The window will pop up
Find the icon you WANT
Do the same - select it, press Apple+i
Then in the top left corner you will see a mini icon. Click that so it's selected.
Hit Apple+C
Then select the icon you want to replace. Click on that so it's selected
Hit Apple+V
If it doesn't show up, just do it again.
To REMOVE an icon - same thing - press apple+i on the file you want to remove the icon on
Click the little icon in the top left corner so it's selected
Hit Apple+X
The icon reverts to the ORIGINAL icon.
As mentioned above, there are other programs, that you pay for, that can do this for you automatically, and can change icons within say browsers and such (like your little finder icons, etc). It's cool for about 10 minutes, but I don't think it's worth the money.
Make sure to check out apple.com downloads, iconfactory, and many other websites for apple icons, there are a TON out there.

[SOLVED] change icons in thunar (XFCE)

Hello all,
Me again. Is there a way to change the icon colors in Thunar? I copied the gnome-wine, gnome-wise, etc. from my Xubuntu test box and copied them to /usr/share/icons. I can see they show up under System Settings, Appearance/Icons. I can even select them, but only the icons on the desktop change colors (call me crazy, but I like the green folder icons). However, the icons in thunar are still the grayish brown standard icons.
Is there a way to have the thunar icons use the XFCE system icons?
--nixIT
Last edited by nixIT (2011-06-03 16:17:00)

in xfce4 (4.8.0.3, the version I am using in ubuntu):
You can do this to chang the icons in thunar and through the xfce desktop
1) Click the main menu (Xfce menu at the bottom-left of the screen)
2) Click Settings -> Appearance
On Appearance dialog:
1) Click Icons tab (or press alt+i)
2) if you have icon themes installed you can selec them (such as Tango)
-- this will change iconds for the entire desktop:
Thunar, Xfce menu, etc
EDIT: I now realize that this was about changing icon colors and the above was already noted in the first post
.. any way it helped me change my icon theme to Tango...thanks
Last edited by NeoH4x0r (2012-07-01 23:32:11)

Changing date/time ...

I have a question about changing date and time ... thanks a lot in advance.
I have .CR2 files and I want to change the "date time original" info ... I want to change this info in the raw file, so I clicked on the "write date or time changes to into proprietary raw files" check box in the catalog settings window ... and then, after changing date/time with the "edit capture time", Lightroom wants to save changes and after clicking the arrow on the thumbnail, it creates a sidecar file. If date/time changes is to write directly into raw file (because of catalog settings indicated above), why does Lightroom create sidecar .xmp file?

There are two things going on here.
1. When you change the capture date/time (Date Time Original), the change is immediately reflected in the EXIF portion of the Metadata panel in the Library module. Because this is a metadata change, the warning arrow appears on the thumbnail (if you have that set to show in the View Options)....and clicking on that arrow brings up the "Metadata changed, do you want to save to disk" dialog. Note that this happens when you do any kind of metadata change, not just changing the date/time. At that point you can either decide to write the metadata to disk, or not.....if you typically write your metadata changes to XMP I guess you'd say "Save", but if you don't then just ignore it. Of course if you say "Save" then Lightroom will do as requested and write the Metadata, if it's a DNG,JPEG,TIFF etc, the Metadata is written to the XMP section of the file header....but if it's a proprietary RAW then it's written to an XMP sidecar.
2. The second thing is that if you have the option set in the Catalog Settings to write date/time changes into proprietary raw files, then the change that you make is reflected in the Raw file.....this is a different change to the XMP update.

Change capture time of many shots decrement of some minutes...

Hi to all,
I've a proble that drive me crazy.
I've 3 cameras and operators (2 x D700, 1 x D300) and in a wedding session they missed to
synchronize camera's timers, so when D700.a sign 10.53am D700.b sign 10.27 and D300 sign 9.43.
At this point I would like to Syncronize captured time using LR3 feature so every camera shift time
of right values. D700.b -25minutes, D300 -1h10minuts.
How I can obtain that ?
Thank you very much...
PS: the shots are almost 4500 so a manual change of each one is impossible to do...

The edit capture time dialog in LR is somewhat missleading, as you could think that you would set the capture time for all selected photos to the same absolute time when choosing "Adjust to a specified date and time". But then, who would want to do this ...
So LR shows you the original capture time of the most selected image, and adjusts all the selected images by the difference of the original and the changed capture time of the most selected photo.
Beat Gossweiler
Switzerland
Message was edited by: b_gossweiler

Can you change the volume display at bottom of screen to the song time instead?

I have just bought a new Ipod Nano and really like it! The only problem I'm having is when playing songs the bottom of the screen shows the volume level rather than how far it is through the song in time (like the old nanos used to show). I find it really annoying not knowing at a quick glance how much more of a song is left to play.
I know this info is displayed by double tapping the screen (although it is only shown temporarily). Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
Thanks in advance.

Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
There is not. You can let Apple know how you feel about it using the form on this page.
http://www.apple.com/feedback/ipodnano.html
B-rock

Change icon & time of the documets display

Similar Messages

Maybe you are looking for