Change image size (but only one value)
Is there a way to resize an image using Automator but only change one of the values? Example, I have images (.jpg) that are 1440x1080 but I want to change them to be1920x1080.
Dual 2.7 G5/ Dual 2.0 G5 Mac OS X (10.4.6) 30" Apple Monitors, Final Cut Studio
I am exporting a still image from a HDV timeline in Final Cut Pro. The problem is that the video originally is 1920 x 1080 but when you bring it into FCP it makes it 1440 x 1080. While editing, FCP makes the video look like the original resolution, but when a still is exported it looks smashed in from the sides. Bringing it in to Photoshop I just change the resolution from 1440 x 1080 to 1920 x 1080 the picture looks like the original video resolution. I offen times have several stills and I was looking for a quick way to change them quickly. I work with our police department and get various videos to make still images, then they email the pictures to other police agencies. Our countywide drug enforcement agency is going to get a new video camera and I think they should get a HDV camera, the stills from HDV is much better that from regular DV video.
Dual 2.7 G5/ Dual 2.0 G5 Mac OS X (10.4.6) 30" Apple Monitors, Final Cut Studio
Similar Messages
-
I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
I'm using Preview Version 7Hello @kgingeri1,
Welcome to the HP forums.
If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
If ePrint works fine, it is definitely a Google Cloud Print issue.
Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping! -
Hello. I added custom http response headers to my SP site web config file as follows:
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Methods" value="POST,GET,OPTIONS" />
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type,Authorization" />
</customHeaders>
</httpProtocol>
When I try to call any web service, i get these headers two times each:
HTTP/1.1 200 OK
Cache-Control: private, max-age=0
Transfer-Encoding: chunked
Content-Type: application/atom+xml;type=entry;charset=utf-8
Expires: Sat, 01 Mar 2014 19:11:37 GMT
Last-Modified: Sun, 16 Mar 2014 19:11:37 GMT
ETag: "3"
X-SharePointHealthScore: 0
SPClientServiceRequestDuration: 20
SPRequestGuid: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
request-id: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
X-FRAME-OPTIONS: SAMEORIGIN
Persistent-Auth: true
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
MicrosoftSharePointTeamServices: 15.0.0.4569
Date: Sun, 16 Mar 2014 19:11:37 GMT
and that gives me error from ajax: The 'Access-Control-Allow-Origin'
header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.
The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed.
Origin 'null' is therefore not allowed access.
Any idea???Hi Ann,
Please check whether there are duplicate custom headers in your code.
Similar issue for your reference:
http://social.msdn.microsoft.com/Forums/office/en-US/b79b75f4-b46b-46ae-ae29-17a352b6b90b/custom-http-response-headers-for-sp-2013-shown-2-times?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support -
How do you change image size in the title window?
I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case. When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?
Thank you again for responding Hunt. I did find out what what was happening.
I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
Terry Lee Martin
Date: Mon, 17 Aug 2009 16:04:16 -0600
From: [email protected]
To: [email protected]
Subject: how do you change image size in the title window?
Welcome to the forum.
That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
What happens if you choose Title>New Title>Default Still?
Good luck,
Hunt
> -
Drag and Drop with mulitiple drag sources but only one correct answer?
I've created two drag sources (in a Type group) for one drop target. I want to be able to drag only one or the other onto the drop target. I changed the correct answers from 2 to 1, but I can still drag both onto the drop target. Is there a way to reject the second drag source?
Is there a way to select the same drag sources and have the same situation for a different drop target?
Plus, if I have the drop target set to not visible, is there a way to change it to visible once a drag source is dropped on it?
Sorry for the newbie questions. Thanks for any help.No, I made the target invisible, not the drag object.
I have sample text (a paragraph missing periods). I created an image file of the period (essentially, a dot within a square with the same color background as my slide). The reason I created the image (and not just a round filled shape) is because if I can get this to work, I'd like to use other punctuation mark images. I imported the period image and made 3 copies of it (4 separately named images). Two of the images (the drop targets) I placed where they belong in the sample paragraph and made them invisible. The other two images are visible and would be the drag sources. I want students to be able to choose either copy of the drag source and place them on either of the drop targets (no specific order, but only one being able to be dropped onto one target). With the correct answer, I'd like to make the target visible. In the drag settings, I unchecked "send back to original location" and then set it to absolute. This is so the student would be able to place the period in other areas of the sample paragraph (but not be able to "find" the active areas that would automatically pull them into place over the target. Sorry, I don't have access to the program at this minute, so I can't remember what the other setting was instead of absolute that "pulled" the drag source onto the target.) Anyway, if set to absolute, the dropped items do not line up properly (because they land where they were dropped, obviously). So, I'm looking for a way to then make the target (that was invisible) visible when one correct period is dropped onto it, plus then reject any other periods being dropped onto it.
I'm open to suggestions if there is a better way to do this. -
Request.getParameter("checkbox") Returns only one value
Hello Friends,
I have a very urgent problem on live site. I moved my project from jrun2.3.3 to Jrun 3.1 and I was using multiple select and checkboxes.
With Jrun3.1 if you select multiple select or multiple checkboxes it returns only one value instead of all the values.
Any help is hightly appreciated.If multiple checkboxes have the same name, when selected and submitted, it will pass all values. But you will need to access those using getParameterValues("checkboxname") not getParameter("checkboxname"). The same goes for select elements.
Perhaps it was a bug in JRun 2.3.3 that allowed you to reference all parameter values using just the getParameter("xxx") method. -
How do I set up a separate icloud account? Both my wife and I have an iPhone 4s and an iPad (1 and 3), but only one Mac. We are tired of our "stuff" getting mixed up together when we sync. Thanks much
You don't need separate iCloud accounts if you want to simply sync unique content to each device using iTunes. I have three iDevices using one ID and one iTunes library and each device has it's own content on it. You need to set up the sync configuration for each device. This is what I recommend.
First turn off auto sync in iTunes. Launch iTunes on the Mac and go to iTunes>Preferences>Devices>Prevent iPods, iPhones and iPads from automatically syncing. Click OK and then quit iTunes.
Connect one of your devices to the Mac and launch iTunes.
Click on the device name on the left side under the devices heading.
Click on a tab in iTunes - Apps for instance.
Click on the Apps that you want to sync to that device.
Make sure that the Sync Apps heading is checked.
Follow the same procedure for all of the other tabs in iTunes ..... Music, Photos, Movies and so on.
After you have finished making all of your selections, click on Apply in the lower right corner of iTunes.
When you are done, eject the first device and do the same thing with the other device. iTunes will now remember the sync configuration on each device.
You can change that configuration any time that you like by following the steps outlined above.
If you want to continue to auto sync, turn it back on in the iTunes preferences as described above. -
Home sharing is turned on on both of my computers but only one computer is showing the icon.
I have both of my computers turned on and home sharing is turned on on both computers as well but only one computer is showing the icon so I can't share. I have tried turning off the home share and turning it back on but nothing changed.
Any suggestions?Hi there nc999!
I have an article here for you that will help you troubleshoot this issue with Home Sharing:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.
In your library, right-click the song you want to edit.
select "get info".
go to "options" and select the start and stop times for your first section of the song.
click "OK".
Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
Now you can go back to the other version and repeat the process with a different start/stop time.
Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings. -
I have my ipod backed up on multiple computers but only one computershows all my playlists. How can I get all my play lists to show up on multiple computers?
If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
Using iPod with Multiple computers
Managing content manually on iPod
If your iPod is set to update automatically take care when connecting to a different computer if your current one is out of commission. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. -
Change image size on list Field
I have list library which has column of "Person or Group" and selected "Name with (picture)". But i cant change image Size there. its always 62x62. How can i change it?
any idea?
Regards,
LasanthaHow exactly are you wanting to change it? height and width should just be attributes in the element... so.. probably the most simple (but not exactly elegant) way to handle this is to use jQuery.
If you drop the following script into a Content Editor Web Part on your page, it will resize all the profile pics to 100x100. (change the numbers to the size you want):
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script>
<script type="text/javascript">
jQuery(document).ready(function($){
$("img[width='62']").each(function()
$(this).attr("width","100");
$(this).attr("height","100");
</script>
Some Caveats:
1) This script resizes ALL images that have a width of 62. So, if you have some other random image on your page that is 62px wide, it will find it and resize as well.
2) I'm references the jQuery library externally which I do not usually recommend, but at least you can drop this script in and it should just work.
Again, not elegant, and I'm sure someone smarter than me can improve on it, but it should at least get you what you need.
Good luck!
Mark -
Is there a way to keep a particular backup permanently? I'd like to keep a backup, but only one permanently.
Thanksds store wrote:
CCC can also custom schedule and save the changes between cloned states for backup just like TimeMachine does or choose the strict mirrored clone option or even choose highly custom options in what gets saved to the clone and how.
Yes, it can, but since CCC and other cloning apps always compare everything on the Mac to everything on the backup, it takes far longer, and much more CPU, to figure out what needs to be backed-up, than Time Machine (which uses the File System Event Store, a log of changes that OSX keeps on each drive). That means it's rarely practical to run a clone more than once a day, as there's a noticeable performance impact; but TM's quick backups are barely noticeable.
As an example, the TM backups on my small system rarely take more than a minute, and I rarely notice them unless I happen to see the icon spinning. But I have my CCC clone updated early each morning (while I'm still snoozing), because it takes 10-15 minutes and slows performance considerably.
So it has the best of both uses now, and the clone is bootable like using the original drive, which TimeMachine lacks as it's only a backup system.
Absolutely. I always recommend Time Machine plus a clone (minimum).
Also clones can be directly accessed, like any other normal drive, by any computer of any operating system that can read the HFS+ format of the Mac, unlike TimeMachine which only works with a Mac. This is beneficial as one can choose to use a Win or Linux PC with their Mac files in times of crisses, to transfer them etc.
That's a two-edged sword, as they say. Time Machine backups are somewhat more secure because only Macs can read them. But again, if you have both TM and a frequently-updated clone, you have the advantages of each.
Don't make me write a TimeMachine vs clones smackdown
See Time Machine vs. Clones and Archives -
I have been trying to transfer some different movies from my PC to my IPad, but they are not showing in the "movie" folder. I have sync'd the movies (these are mp4 files) that I wanted transfered, but only one is showing in the folder. There are 13 other movies in the folder that have the ICloud symbol in the corner of their picture. I understand that I can pull those movies from ICloud any time I want to watch them, but I want to watch the ones that I've just sync'd with my IPad. How do I find them? After I checked the movies I wanted, I "applied" them and watched it sync and copy the wanted movies to my IPad. Now what? Thanks.
There are some good programs that you could use to convert the format, Handbrake or Mpegstreamclip are two good free ones. Convert them to MP4 and then try importing them again.
-
How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?
how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?
No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l -
I am moving back home to live ,currently I have ipad2 ,4s iPhone ,wife 4s and daughter iPhone 5 ,pad 4th gen and iPod touch ..all different iTunes account s but only one invoice which is mine ...can we share and if so how ?
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
Cheers, Tom
Maybe you are looking for
-
Itunes freezes on the last step when i try to sync my iphone. There is no error message.
Every time I try to sync my phone itunes freezes on step 6 when its copying the new info to my phone.I have tried deleting and redownloading itunes and I tried to restore my phone but it keeps telling me the session has timed out. I am in the process
-
Problem Installing Virtual PC for XP Mode in Win 7 Pro(64) SP1
XP Mode has successfully installed, but Virtual PC has not. Installing Virtual PC requires only a Windows Update, so I downloaded the correct file -- Windows6.1-KB958559-x64-RefreshPkg.msu. When I try to install it I get that this update is already i
-
Why won't my computer allow to download windows updates?
my computer can not download windows update.It keeps saying I am not connected to internet.
-
Premiere CS5 crashes a lot. It is "box" version, not download, in Mac Pro, please help.
My Mac Pro with Premiere CS5 crashes a lot. It is a "box" version, not a download, I have searched for updates and installed them and it still crashes, usually when rendering or encoding. My comp is a Mac Pro with 8 gigs of memory, 12 core, nice and
-
How come my device is not showing up in the summary pane?
I am trying to restore my device because I have a black screen. I signed into my account but my device is not showing up in the summary pane. Why not?