Change import from camera destination default?

Hi,
Is these a way to change the "import from camera" destination defaults? I typically want to put new imports into new directory, and it would be helpful to specify a default parent directory.
Thanks. Kent

When I went to the Audio Midi setup, bit showed that the default audio output was already set to 44100hZ. I tried the camera again, no luck.
It is interesting that if I create a new project, it too will open with the filename and then (iSight) in brackets behind it - as if that is some type of preference setting, but I can't understand where it came from.
I couldn't see anything in the article.
Any other ideas?
Thanks,
Cheryl

Similar Messages

Originals auto modified on import from camera

I discovered that iPhoto has modified a lot of my pictures when importing from camera. Not only vertical photos (bacause of auto rotate I believe) but also landscape. Mostly photos with high contrast or too dark/too light photos are modified and enhanced. This makes me angry! I usually export photos to modify in PS and this way I do not work with the original! I suppose the modified version is not lossless.
I can't find out how to turn off this auto modifying.
Any suggestions?

hansik:
Are you aware that you can have iPhoto use PS as the default editor? The edited version is saved in the Modified folder and the originals never get touched. The only caveat is that you do not change the extension or file name. If you need to do either then you do a Save As to the desktop and then import as a new file.
Are you concerned about the thumbnail size increase due to HD space issues? There is a way to have your source files on an external HD and only have aliases, thumbnails and the modified files on your PB. My 27G (15,600+ files) of image files on my second HD are represented by a 1.75 G iPhoto library on my boot drive. When the external drive is not connected the library is still operational on a limited basis: you can view thumbnails, create, delete and move album folders, add comments and, with some hassle but doable, add keywords. You can't edit, work with books, slideshow, etc. or anything that requires moving thumbnails. Once the HD is remounted the library is fully functional again. Great for laptops with limited space.

Cannot import from cameras

Hi. LR 4.4. Mac OS X 10.9.5. Sudden problem: LR does not find files to import from cameras. I read some similar problems here so: Changed cable. Changed cameras. LR FINDs the cameras and identifies them correctly. But when I hit import, in bottom left corner it says "finding files", circle rotating indefinitely and nothing shows up. I deleted LR preference file. Started new catalog. Strangely, if interestingly, it did then ONCE find 5 of 100 pix on my Nikon D7000, but not the other 95 photos, and still nothing on the Canon Powershot G7X. It can import from the hard drive. Frustrating! Thanks for any suggestions. ---DG

yes, SS, that's what I'm doing and of course I can't FIND the card reader! Good idea though...

IMovie crashes every time on Import from Camera ?!?!

So iMovie just started crashing every time I click on Import from Camera. I have no idea what to try really... I've been having an issue with iPhoto too. Every time I open it it says "A photo has been found that has not been imported. Would I like to?" It doesn't matter what I click on, yes or no, it makes an empty folder. I'm tempted to just reinstall the whole iLife suite but wanna make sure my current libraries are safe. Unless anybody has any ideas of anything else I can try?

A reinstall shouldn't affect your iMovie Events Library or Projects. If these are in their normal locations, the newly installed iMovie should see them when opened for the first time. The normal locations are in your user (Home) folder Movies>iMovie Events and Movies>iMovie Projects. If you are storing these on an external drive they will be in folders named iMovie Events and iMovie Projects at the top level of the drive. If you have moved these to a different location, then iMovie will probably not find them. Any moves should always be made from within iMovie by Command-dragging between the disk icons in the Events Library and Projects Library. Never move Events or Projects using the Finder!
Similarly, a reinstall of iPhoto shouldn't affect your Events or Albums - again provided you haven't moved the iPhoto Library from its default location. If you are uncertain about this, check on the iPhoto forums.
In any event, before reinstalling software you should have a back-up. I use Time Machine for this. After reinstalling you should Repair Permissions using Disk Utility. There is no guarantee that everything will be fine after reinstalling, as you may have other issues with your system that are affecting iMovie and iPhoto. But I'll leave it there as I'm now getting out of my depth!
John

Is there any way to Import From Camera (dv) in a way that Final Cut Pro can later import everything, including the audio

I know iMovie dv to Final Cut Pro has no audio. At least with my old events. But is there any way I can make it so future dv files Imported From Camera in iMove 2011 will later work in FCP?

Hi
Yes and No
And it depend's on what quality You want and how much problem You stand in FC - and what version of FinalCut You mean.
• FinalCut Pro-X - I have no clue at all
• FinalCut Express and Pro (till 6.0.6) - I'm very familiar to.
• If You take out the Imported/Captured material from Event's - it seems to be 100% OK - but in wrong codec so it will work in FinalCut BUT with a lot of RENDERINGS - every slight change = Need of RENDERING. To much for me.
• If You aim to do some Editing in iMovie them move over to FinalCut = Moving from Event's to Project's result in that every second line in the picture is discarded ( and can not be repaired ) so the project will lose a lot of quality - whatever way You use to Export/Move it over to FinalCut.
So at least I'm better of by Capture in FinalCut from Start as I can keep 100% quality till Movie is done.
Yours Bengt W

I migrated my old IMac to new and Aperture won't let me import from camera

I migrated old iMac to new and Aperture will not let me import from camera from. Migrating created two users and I get an error message saying I do not have permission write. I have gone to get info and it says I have read and write permissions.
iMac 10.7.5 Aperture 3.4.5

nopriors wrote:
I used migration Assistant
That's the problem. Apple doesn't make it clear that you should transfer when the new Mac starts up, not later on with Migration Assistant.
which told me to enter a new name . I had the new computer and old with same name. I called the new user my name with word "old" so not the same name as old Mac.
The problem isn't the names, it's the (mostly hidden) User ID number (UID). See the pink box in Problems after using Migration Assistant for an explanation of what happened.
Your best bet is to use one of the workarounds (probably #4) in the green box there, to re-transfer your account. It will have exactly the same name and permissions as before.
If you want to change the name, you can, but it takes a minor finagle. Post back if you want to do that.

Imovie 11 crashes when i choose 'import from camera'.

suddenly, imovie 11 9.0.4 crashes when i choose 'import from camera'. never happened before, always worked fine. driving me crazy! can anyone help? i tried to delete the plists, did disk permissions, etc etc. am running 10.6.8, haven't changed anything except to delete a bunch of old projects.
can i just reinstall imovie from the install disk?
thank you!

Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
Also look for crash Logs>iMovie.

Import From Camera problem

I thought I'd try out the "Import From Camera" script as the first part of my workflow. I had a card with about 30 images on it taken with my Canon 1DMkII. I typically rename my files "YYMMDD_hhmmss", and although there is no explicit way to do this (EXIF Capture Date) with IFC it appeared that using the "modified date" option gave the same results.
I ran the script and immediately encountered several errors - the script said that "One or more of the downloaded image filenames match filenames in the specified destination folder ..." I knew this wasn't the case since all images were taken at different times.
Is there another way to use the EXIF date within IFC? Is this a script I can modify myself in some way?
It does almost everything I want, but the renaming part is the deal-killer.
Any thoughts would be appreciated.
Thanks,
Jeff

Try using a card reader. That way you can open the memory card as it were an external volume, select and drag the files in small groups to a folder on the Desktop. That way you can isolate those files that are causing the problem.
If there are only a few files that won't cooperate you may have to sacrifice them so you can reformat the memory card using the camera and then test it with some test photos and videos.
Is it just videos that won't copy? See if you can determine which files are causing the problem.
OT

Import from camera (Canon XHA1) in FCPX

When I try to import footage from tape on a Canon XHA1 connected with firewire, it doesn't work, only the webcam appears as an option.
(I already changed the PLAYBACK STD to HDV andHD DOWN-CONV to OFF)
What to do?

ad 0)
why don't you select just the portions you need in FCPX import dialog? Imports from cam (or cam archives) allow the usual skimming, in/out and the new multiple in/out selections …-
ad 1)
I wouldn't use iM's imports at all in FCPX, see following …
ad 2)
yes, there is a loss; iMovie converts to AppleIntermediate, which is versatile but not as good as FCPX' prores.

Import from Camera Screen - cut off

Folks,
I am trying tom import from my Sony DCR-DVD201 camcorder. I can import fine, but the "Import from Camera screen" is cutoff and black for the first 3/4 of the screen -- I can see only the very bottom edges of the video clips.
I can still import, but is there a fix/setting for this issue?

i have this bug too. resizing the window, and then hitting play will show the whole window. i have a Panasonic HDC-SD7. it works, but a very annoying.

When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

Have a look at your import setting specifically Store Files:
Make sure it is set to where you want the originals to go.
Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera.

Import from camera

Any idea how to import from a camera these days? In Aperture it found the camera automatically and you could select photos and import.
With Photos it seems that if I go to File > Import I can find my camera shown as an external drive but I can't then choose a sub folder so I can't seem to import any photos that way.
The way I'm doing it at the moment is through Finder - dragging and dropping onto the desktop and then importing that way.

Importing from cameras should work just as it did in iPhoto. As LarryHN points out, if it doesn't, let us know exactly what is occurring.
IF you have not yet done so, enable Sidebar (from the View menu). This will list the connected camera under the Devices group. When you select your camera, confirm that the Open Photos... option is checked.

Hang during import from camera or media - HELP!

iPhoto hangs during import from camera or media reader. Works for 20 or more photos, then hangs. No response at all. Must force quit. After restarting the import, it will go further the next time, then hang again. And again. And again. Eventually the import completes. After that, all is OK until next import. VERY FRUSTRATING. Especially with 8GB media cards. ARRGH!
I've tried rebuilding iPhoto library (all options). Using iPhoto 7.1.5 on OS X 10.5.6. 4GB ram, intel dual core.
Help me Obe-Wan. You're my only hope.

LarryHN wrote:
Once you get your photos use your camera to reformat your media card - problems like this can be caused by a flaw in the card format
And it is better to use a card reader to import yoru photos and after they are safely in iPhoto use your camera to reformat your card - this assues no data loss and keeps your card format fresh
LN
I usually use the media reader. After the imports started hanging is when I tried importing direct from the camera to see if it made a difference. No difference.
I've reformatted the media. No difference. Still hangs on first import after reformat. Multiple media cards, all same result. Tried different USB ports, same result. Tried different media readers. Same result.

Why does the "Import from Camera" selection open up iSight instead of my camera?

My Sony Cyber-Shot is connected my iMac through the included USB. About an hour - two hours ago I clicked on the Import from Camera option and it showed my videos recorded using my camera, but now when I click the option it opens up the built in iSight instead. Can someone please help me? How can I get it to open up my camera video files instead of iSight?

I don't have the Sony, but on my Canon you have to have the camera in "play" mode and when you plug in the usb the camera asks to what do you want the camera to connect. You choose "computer." In other words, it makes a difference in what order you connect things.

"Import from camera" doen't work

I want to import movies from mi iPhone 4S and the "import from camera" option doesn't work. When I click de button (or pressing cmd+I, or going to archive > import from camera) the arrow turns to the colored beach ball of death and the aplication doesn't response.
Any solution? If I import videos from archives there's any problem, but I want to import videos from my iPhone 4S

Yes, I tried with iMovie 11 and it works perfectly, I can import videos from my iPhone 4S without any problem. But with Final Cut Pro X I got this problem
I don't know what to do, I tried to repair permissions, erase the events folder... And nothing, the problem stills there
I can use iMovie and then import from Final Cut, but it's a double work. I want to use this option in Final Cut

Change import from camera destination default?

Similar Messages

Maybe you are looking for