Change in AUOM not influencing the SOP Disaggregation

We are doing SOP flexible planning at Product group level . Once we generate the online forecast we are disaggregating to the member level from the product group . This disaggregate based on AUOM maintained in the material master. It was working fine. We changed the AUOM in the material master. the change in AUOM is not reflecting in the disaggregation factor of SOP. Still it is considering old value .
Any input will be highly appreciated .
Thanks
JJ

Hello,
not really sure that I understood problem correctly, but try the next:
- analyse optimizer log file, it lists all pegging relationships that have been broken if any. Check orders/products and try to undertand why it was happen, i.e. resource unavalability, Maximum Earliness of a Receipt is too short or there are too many orders with priority 1.
- check planning results: if there are already orders in the past, i.e. pegging is already broken. If the pegging is already broken, optimizer will NOT re-establish it.
- set "Ignore upstream orders" and "validity period of orders as soft constraint " in the optimizer profile
kind regards
Alla

Similar Messages

  • I am trying to use the brightness adjustment on a grayscale photoshop CS6 file.  The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment.  I have run into this problem b

    I am trying to use the brightness adjustment on a grayscale photoshop CS6 file.  The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment.  I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS.  I would like to know how to overcome this problem?

    Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

  • Rest.items would not influence the payment days ,how to config?

    Hello,everyone!
    I have a question,you know the Rest.items would influence the payment days,how to config can avoid the influence?
    Thank you!
    Best regards
    Doris

    Dear Gladys,
    Than you very much,i get it !
    I can config "payment term from invoice" to realize!
    Best regards
    Doris
    Edited by: doris feng on Apr 6, 2010 3:20 PM
    Edited by: doris feng on Apr 6, 2010 3:22 PM

  • MDM Change tracker iView not fetching the data?

    Hello Experts,
    we have MDM Change tracker application deployed and assigned to some role in portal. However, the problem is fields like "Table" etc are blank. I am not able to fetch any data in it. I have activated change tracking for the required table in MDM backend as well.
    I was following this blog: /people/balas.gorla/blog/2006/09/08/change-tracking-in-mdm
    It is mentioned that some DB setting have to be done and some query to be written. I am confused, I have an iView in portal so do I still need to write the query? Or what is that I am missing?
    Please help.
    Ameya

    Hi Ameya,
    The SQL query written in the mentioned blog is just to recheck the data.
    Please recheck the settings using these documents:
    http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/content.htm
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/807861ac-f941-2c10-8f8d-c57f9d421b99?quicklink=index&overridelayout=true
    http://help.sap.com/saphelp_nwmdm71/helpdata/en/49/a42bc834de1b93e10000000a42189b/content.htm
    Also on resetting change tracker:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10cbe10c-0654-2c10-3d8b-ff99dadc402e?quicklink=index&overridelayout=true
    The error can also occur if Database userid used has expired.
    Hope this helps!
    Thanks,
    Ravi

  • Workbook with changed query does not display the changes...

    Hi,
    I have a problem with a workbook with one query in - the query has been changed, but the new added keyfigures are not displayed in the existing WB.
    I know from Bex 3.5 there is the option on WB settings "return to global definitions" - I miss this functionality in BI 7.0.
    My installed sap gui is version 710
    Please let me know where I can switch on this feature...
    regards
    chris

    If you use "Return to Global Definition on refresh" option, all the users would have to have it turned on in their workbooks. In that case won't they lose any settings/navigation the user did, specific to their need. All the workbooks end up being the same in that case.
    We are still running on 30B and starting the upgrade to BI70. We just went through training on the new BEx analyzer, and I have to agree with you that some of the useful features of BEx 3X will be missed. Specially in the area of Workbook support, things like Copy query, insert query etc are missing as well.
    Thanks
    Vineet

  • Can you change iMessage to not use the enter key to send a message on a macbook pro?

    I'm using a mac with OS X Yosemite version 10.10.1 and I'm wondering if you can somehow change the settings of iMessage so that when you press the enter key it doesn't send the message. Thanks if you can help.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Installing printer mac would not take my apple id so I changed - now will not take the new password

    Macbook air OSX 10.9.3: I cannot install new software because my password won't work. I changed it but to no avail.

    Hey my name is keara washington

  • Lion does not recognizes the superdrive as external drive

    Hello,
    After having replaced my superdrive for a SSD in my macbook, I look for a solution to retrieve the original superdrive in Lion.
    the superdrive is now contained in a slim box firstcom. Each time i plug the drive via USB, it starts normally but i have no software able to detect it (even VLC)
    I already did this method but with no success : http://macenstein.com/default/2011/07/how-to-get-your-external-super-drive-worki ng-in-lion/
    That would be great if somebody can give me some help to solve it.
    Thank you for your responses.

    I do not think, that replacing the superdrive by another drive is a hack. It probably does not influence the warranty. Changing the HDD by a another HDD or SSD does void your warranty, I think.
    Can you not even "mount" the external superdrive with Disk Utility?
    But I have another question for you: do you use the SSD for the OS? If yes: why did you not put it in the place of the HDD and the HDD in the superdrive slot (if both are the 2.5" type)? Because with earlier MBP's the Superdrive Sata connection has a lower speed than the HDD Sata connection, which means that you can have even more speed advantages by putting the SSD in the HDD place and place the slower HDD in the Superdrive location.
    But, like ds said, on Bmer's forum you will certainly find the answers on your issue.

  • "Automatically Write Changes into XMP" Not Saving XMP Files

    I tried finding some other discussions on this but I couldn't seem to find anything...
    I recently checked the "Automatically Write Changes into XMP" setting in my "Catalog Settings". However, as I continue to add pictures to my library and make changes, I do *not* see the XMP files being written to the location of the pictures (Nikon NEF files located on my hard-drive). In fact, I can't find the XMP files anywhere. If I want to output the XMP files I have to do a Ctrl + S (Photo --> Save Metadata to File).
    I did notice that when I unchecked the setting and re-checked it, *some* of the XMP files showed up. However, in my import of 24 photos, only 14 had XMP files. I had to manually "Save Metadata to File" to get the XMP sidecar files to show.
    Am I doing something wrong? Is something not working right? I'm a bit confused. I assumed it would automatically export the sidecar files.
    How often should it be outputting XMP sidecards? If I import a new image should the XMP sidecar file be created? Or is it created the first time I change an original picture?
    I am using Adobe Lightroom 2.0 (Camera Raw 4.5) on a Mac OS X 10.5.5.
    Thanks,
    -Leftquark

    @Eric: hitting cntrl+s works but can be tedeous on large galleries. I've been doing this but it can be a pain.
    @Jeannine: different topic than this thread but to answer anyways... Lightroom automatically saves all changes into your catalogue. You never need to dave your changes (here's the kicker though) as long as you do not move the original file. If you
    move the file than lightroom won't know that it's the same image as the one you've edited. Once you are done editing your image you will need to "export" the image to a new file (you don't wan to overwrite the original). If you don't export than only lightroom will have your edits. Lightroom is "non-destructive" Which means that it doesn't touch your original photo. Lightroom keeps a text file containing the instructions on what you did to make the edited version. Since your changes are just text inatryxtions you have to "export" the image to get your final image in a version you can put online, print, etc. But to answer your original question, I think you prob moves the original image. If not, could you give us more info?

  • Updateing CustomXML scheema from sharepoint 2010 in VBA does not update the DIP (Document information panel)

    I need to update a schema from Sharepoint with namespace
    http://schenas.microsoft.com/office/2006/metada/contentType when i am opening a Word document. I am using VBA to do so. When i have made the Changes it does not update the DIP, not until i save the document.
    Is there a way to update the dip using VBA.
    /Ola
    olha

    Hi,
    This is the forum to discuss questions and feedback for Microsoft Office client. For any VBA related issues, I would suggest you to post in related MSDN forum -
    Microsoft Office for Developers, to get better support experience:
    https://social.msdn.microsoft.com/Forums/office/en-US/home?category=officedev
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to influence the substitution workitem list in the inbox?

    Hi gang,
    Do you have an idea if there is a simple way to filter the work item list offered for an agent in his inbox? BADI preferably, 'nice' modification (enhancement spot?) in the worst case.
    I got a requirement, that for some work items the substitution should be disabled (not some tasks but some work items!!!).
    The whole scenario: SRM PO approval workflow. There are two different approval step types (lets name them preliminary and real). Approval task is the same (SRM standard). Approvers maintain the active substitution for the preliminary approval steps. However; this must not influence the real approval that cannot be delegated.
    Message was edited by:
            Michal Klemba

    This would be to easy
    Imagine the agent A has 5 orders to approve as a preliminary and another 10 to approve as a real. He maintains an agent B as his active substitute. Than the agent B should see... only 5 work items of agent A.
    Regards,
    Michal

  • Can not see the option Execution with Data Change in the infoprovider?

    Hi team,
    i am using query designer 3.x, when i go into my bex brodcaster settings and schedule my report
    i can not see the option "Execution with Data Change in the infoprovider",
    i can only see 2 options
    Direct scheduling in background process
    create new scheduling
    periodic,
    is there any setting which i would be able to see the option "Execution with Data Change in the infoprovider"?
    kindly assist

    Hi Blusky ,
    check the below given link.
    http://help.sap.com/saphelp_nw04/Helpdata/EN/ec/0d0e405c538f5ce10000000a155106/frameset.htm
    Regards,
    Rohit Garg

  • I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

    I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
    Suddenly one of the servers is not replicating with the error:
    Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
    All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
    This server has 2TB of data so I'd rather not have to start the replication again.
    Does anyone have any pointers?
    Thanks.

    Hi drensta,
    Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
    Here is a link for "Why is the "Hyper-V Replica Broker" required?"
    http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
    Hope this hleps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

    sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

    sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
    I want to pass along a couple of tips that will get you more and better response on this list.
    1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
    2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
    3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
    4) If you have a question first search the examples for something tha
    t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
    5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
    6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
    Trying to help,
    Welcome to the forum!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for