Change in background MRP time with EDI scenario for sale order booking

Hi All,
              I have a scenario where  Sales orders are booked through EDI. Now because of some reasons duplicate orders are getting booked in SAP. Now users are  manually deleting the duplicate sales orders.
          Now MRP is running at Night with  duplicate orders in background. So users wanted to run MRP after deleting the duplicate SO.( i.e. during office Hrs)
         Should i change MRP timings to suit the user requirement? what will be the pros & cons if change MRP timings.will it throw errors in EDI.
Thanks & regards,
dev

Dear,
If you change the MRP run time for periodic job in MDBT it would not affect any where only system will create the procrument after MRP run only.
Please try to find out the reason why  duplicate orders are getting booked?
Regards,
R.Brahmankar

Similar Messages

  • Real time scenario for sales order types

    Hi gurus,
    could u plz explain realtime scenario, where we will use the following order types.
    1. Manual Order
    2. Dir dispatch order
    3.loose packs order
    4. manual return order
    5. dir dispatch return order.
    Plzzzz help on this.
    Urs
    Manasa

    Hi Manasa
    As these are not standard order I can't explain accurately, but I will try:
    Consider a shopping mall in this case.
    1. Manual Order : Customer came to shopping mall, collected the items and ordered for them.
    2. Dir dispatch order: Customer called shopping mall employee and booked the order and order directly dispatched for customer.
    3.loose packs order : May be for "handle with care" kind of material.
    4. manual return order : return of manual order.
    5. dir dispatch return order. : return of Dir dispatch order.
    better you compare these order with standard order, that will help you.
    try.

  • Creation of Custom IDoc with Message control for sales Order

    Hi all,
    I am trying to create custom Outbound IDoc with message control.
    I wrote the code in a function module and i want to register that function module. (as in inbound registration of function module as in BD51).I am not knowing if that registration is necessary for outbound Idoc, if so in which transacition?
    Please list me the steps to create a custom IDoc for Message control.
    Thanks in advance,
    Regards,
    John.

    Hi,
    You need to use FM : MASTER_IDOC_DISTRIBUTE to create outbound idoc.fill the data in the tables EDIDC,EDIDD and generate the IDOC.
    check this link:
    Re: Master_IDoc_Distribute
    and use transaction : WEDI for IDOC configurations.
    here you will have all the transactions(step by step) to set the outbound IDOC configurations.
    Regards
    Appana

  • HT2478 how do you make the setting to change desktop background every time you shut down your mac

    how to make setting to change desktop background every time you close your mac
    because i want to make it if anybody tries to change my dekstop picture i want it to go backto set desktop picture

    Don't let other people access your Mac in admin mode - they might change something a lot more important than the Desktop picture.
    However you can use Automator: create an Application in it, and select 'Set the Desktop Picture' from the Library. Choose the picture you want. Save the application, then go to System Preferences>Accounts>Login Items and select the Automator application you just created. This will then run at startup and set your chosen picture.

  • Sales order with MRP run but no need of sales order stock while PGI

    Dear Gurus,
    We have scenario in company that we want to run MRP for sales order & generate requirements. But while doing post goods issue for same sales order, sales order stock need not be present.
    Please tell which planning strategy, strategy group or else should be used here.
    Thanks in Advance !!
    Thanks,
    Vishwas 

    Hi,
    Please configure in the following manner..
    create a strategy group say Z9..in this maintain main strategy as 20  and alternate strategy as 10... Now assign this strategy group to material in material master in MRP3 View..
    Now create sales order say A and run MRP with MD50..after completion of production you will get Sales order stock.. now convert this sales order stock unrestricted use stock..
    Now before you are doing PGI for sales order A... go to sales order change VA02 and change the requirement type to KSL from KE and then system will all you to do PGI with unrestricted use stock...
    Thanks
    Kumar

  • Report for Sales Order Change History   CDPOS and CDHDR

    How to take a report of the data for the Sales Order Change history for a particular period of time. It is required to take a report of all the Sales Orders for which the basic price has been changed. Please let me know the procedure. I could not get the data from the table CDPOS and CDHDR
    Helpful answer would be rewarded.
    Regards
    Praveen

    Dear Praveen Kumar
    Have you tried with VBAP where sale order details at item level would be stored.
    Moreover, to my knowledge, there won't be any changes as for as pricing is concerned at sale order level but there is at billing level.  Normally, any price increase / decrease would reflect in billing.  So why dont you to table join through SQVI VBAP (for sale order details) and VBRP (for billing details) so that you can compare the selling price in sale order with billing. 
    Thanks
    G. Lakshmipathi

  • How to club the downpayment and periodic billing scenario in Sales Order

    Hi experts,
    Could you please let me know how to club the downpayment and periodic billing scenario in Sales Order.
    Requirement is :  If you have 10 lacs total amount and out of that 50% should be the downpayment and rest of the amount should be distributed among three equated  instalments for 2 months each (periodic billing). This should work with one line item in sales order. Pls provide relevant inputs how to work out this scenario.
    Your help would be appreciable.
    regards....Diwakaran

    Hi Yang,
    Workflow is the best approach for any issue related to business objects.
    Since you want call FM BAPI_SALESORDER_CHANGE, it will change SO. It means everytime any SO is changed there will an event being triggered.
    object type: BUS2032
    event: Changed
    simple solution:
    1. Please create object type (SWO1) and its super type should be BUS2032.
    2. Add your own method and attach your custom FM which actually updates the qty & PR)
    3. Create Task (PFTC_INS)
    in basic data:
    - provide object type which you have created
    - provide method which you have added
    goto triggering events tab
    - Choose Object Category as BOR object type
    - provide object type (better give BUS2032)
    - provide event as CHANGED
    Please have look into very nice video blog which helps you to create your workflow.
    blog: [Creating your first SAP Business Workflow]
    Regards,
    Sukhbold Altanbat.

  • Create a Revenue Order with Reference to a Sales Order

    Hi Gurus,
      I have specific requirement of creating a Revenue Order ( ZCAR ) with Reference to a Sales Order. The Issue is when I create a Revenue Order from Sales Order by using the BAPI to Copy the data from Original Sales Order it will create copy the data which is there in Original Sales order. My Requirement is when I create the Revenue Order I should have Credit Line which is same as the Order Line from Orignal Sales order and also I need to have a debit line ( which will be a copy of Credit Line ) only difference is Item Categories will be different .
    Please tell me how can I add the debit line in this Scenario and which BAPI's should I use to do this.
    Thanks,
    Raj

    What is the IO you have assigned in the Sales Order please?
    Just check the Sales Order - Account assignement, so that you can able to change if there is a different IO.
    System won't pick up IO automayically until unless you secify in Sales order to done OKB9 settings.
    Chek the above
    Thanks

  • Triggering event through Change Management for Sales order

    I am working on three different scenarios of workflow which is triggered on change of sales order.  I am trying to put conditions in SWEC for the workflows to start but not sure how to go about it.  I created change doc object VERKBELEG and assigned bus2032 and changed as my event.  I inserted a value in condition editor like vbap_(fieldname)_new etc.  Nothing seem to be working.
    I would like to know once we assign event here in SWEC, should we also assign and activate it in the triggering tab of workflow or just create an entry in the linkage table.
    Please guide me as to how I need to work on the sales order change.  I am basically want to trigger a sales order only when a field value is updated or inserted which pertains to my requirement.
    Thank you very much.

    Karthik,
    My problem is still not resolved.  I am trying to put something like this.  Let me know if you have were able to do this in any other way.
    DATA : i_cdhdr LIKE cdhdr OCCURS 0 WITH HEADER LINE.
    DATA : lt_editpos LIKE cdshw OCCURS 0 WITH HEADER LINE.
    DATA : it_vbap LIKE vbap OCCURS 0 WITH HEADER LINE.
    DATA : flag(1) TYPE c.
    DATA : text LIKE message-msgtx.
    DATA: BEGIN OF ITAB OCCURS 10.
            INCLUDE STRUCTURE cdshw.
    DATA:   UDATE LIKE CDHDR-UDATE,
            USERNAME LIKE CDHDR-USERNAME,
            CHANGENR LIKE CDHDR-CHANGENR,
            VBELN(10),
            POSNR(6),
            ETENR(4),
            INDTEXT(200),
      END OF ITAB.
    data : lv_vbeln like vbap-vbeln.
    data : lv_posnr like vbap-posnr.
    SELECT vbeln posnr FROM vbap INTO TABLE it_vbap WHERE
                                           vbeln = '               ' AND
                                           posnr = .
    i_cdhdr-objectclas = 'VERKBELEG'.
    i_cdhdr-objectid   =  '      '.
    CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
         EXPORTING
              objectclass       = 'VERKBELEG'
              objectid          = '            '
              username          = space
              time_of_change    = i_cdhdr-utime
         TABLES
              i_cdhdr           = i_cdhdr
         EXCEPTIONS
              no_position_found = 1
              OTHERS            = 2.
    IF sy-subrc EQ 0 AND NOT i_cdhdr[] IS INITIAL.
      sort i_cdhdr by CHANGENR UDATE UTIME descending.
      LOOP AT i_cdhdr.
        CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
             EXPORTING
                  changenumber      = i_cdhdr-changenr
             TABLES
                  editpos           = lt_editpos
             EXCEPTIONS
                  no_position_found = 1
                  OTHERS            = 2.
      ENDLOOP.
    **change in fname is eq lprio delete the records.
    loop at lt_editpos.  
        if lt_editpos-fname = 'LPRIO' and
           lt_editpos-CHNGIND = 'U' and
           lt_editpos-F_NEW = '03' and
           lt_editpos-tabname = 'VBAP'.
          flag = 'X'.
            concatenate lt_editpos-fname lt_editpos-f_new into text.
          exit.
        elseif lt_editpos-fname = 'KEY' and
               lt_editpos-CHNGIND = 'I' and
               lt_editpos-tabname = 'VBAP'.
          lv_vbeln = lt_editpos-tabkey+3(10).
          lv_posnr = lt_editpos-tabkey+13(6).
          select single * from vbap into it_vbap where
                                           vbeln eq lv_vbeln and
                                           posnr eq lv_posnr.
          if sy-subrc = 0 and it_vbap-lprio = '03'.
            flag = 'X'.
             concatenate lv_vbeln lv_posnr it_vbap-lprio into text.
            exit.
          endif.
        endif.
      endloop.
    endif.

  • Change Tax Code after Partial Delivery for Sales Order

    Dear all,
    The government in my country has changed the GST (Goods & Services Tax) in my country from 5% to 7%. In my system I have created a new 7% Tax Code and assigned it to Condition Type MWST with a new validity date.
    For newly created Sales Order, my pricing procedure gets the correct 7% Tax Code for MWST based on Pricing Date that is later than the validity date I've set.
    However, my problem lies with partially delivered/invoiced Sales Order when updating of prices are not allowed. One possibility I can think of is to allow Condition MWST to be maintained manually and change it during Billing process. But I'm looking for a solution without change the Configuration if possible.
    Can anyone propose a good solution to my problem?
    Thank you.
    Regards,
    Wen Ho

    Hi
    May be you can solve it this way without changing configuration.
    Please take a look at item fields pricing date (sales a tab), service rendered (billing tab - special for taxes). Both fields influences prices and you can change them for instance if you want new tax to be considered you can put an updated date.
    If it does not change prices goto Conditions tab and press the update button (option G copy prices and redetermine taxes could be the appropiatte).
    As a suggestion please test carefully the scenario (taxes are involved) before making any change in Production documents).
    I believe it will work fine. Please rewards points if usefull.
    Best regards
    Max

  • Creation of Billing with reference to the Sales Order

    Dear Friends,
    I need your suggestion for the following scenario.
    Client wants to create the Billing Document with reference to the Sales order.I mean when he is entering sales Order while creating the billing document ,the system should generate the billing document only for the delivered quantity.
    e.g  sales order is created for 100 Tons.And there are 5 delivery documents for 50 Tons.(Still the Sales order is open).
    Now when billing document is created with reference to the sales order ( Not with reference to the Delivery Document) it should create the billing document only for these five deliveries.
    Is it possible? If yes,how?
    Thanks in advance.
    Regards,
    Shrikant

    Hi Murali,
    Currently client has software where he enters only  Sales Order no and their software creates the billing for the delivery document for this Sales Order.
    Here client does not want to enter multiple delivery document nos if any.He wants to enter only Sales Order no.
    Regards,
    Shrikant

  • Report for sales orders with abnormal discounts

    Hi
    We have a discount condition type say ZDIS with 10% which is not changeable manually in sales order..But incase if the user has changed the condition master to 12% and created the sales order with 12%disc...Hence i need a report, the list of sales orders with the abnormal discounts..(the sales orders with the discount value more or less than 10%)..
    How do i get this report..Kindly provide me the table names&logic ...
    Reg
    JJ

    We have a discount condition type say ZDIS with 10% which is not changeable manually in sales order..But incase if the user has changed the condition master to 12% and created the sales order with 12%disc...Hence i need a report, the list of sales orders with the abnormal discounts..(the sales orders with the discount value more or less than 10%)..
    How do i get this report..Kindly provide me the table names&logic ...
    Select KNUMH where KONP-KSCHL EQ ZDIS ( Condition record number)
    Select KONV-KNUMV   Where KONV-KNUMH EQ KONP-KNUMH
    Select VBAK-KNUMV where VBAK-KNUMV EQ KONV-KNUMV
    Then with the help of ABAPER hard code the condition amount (KBERT>10%)
    Regards
    Rohit

  • Re scenarios of sales order

    How many scenarios are there
    like  a sales order is created     - sales order field changes
    like   a sales order is edited       - sales order field changes
    if    a sales ored is cancelled  -  sales order field changes
    any more scenarios how sales order field is effect ?
    and could u pls let me know are  there any field that tracks the change order whenver it get s changed created  cancelled .

    HI
    In sap all changes done are stored in a separate tables CDHDR for header details and CDPOS item details.
    regards
    prashanth

  • Invoice VF01 with reference to the sales order

    Dear Experts,
    Our business requirement is to book the invoice with reference to the sales order without posting delivery and PGI. Provide me the step by step process to complete this configuration.
    Is that suggestible to change the existing document type which the business is using by creating delivery PGI and Invoice to the document type where invoice booking with reference to sales order or I have to go with the new document type only.
    With Regards
    Uday
    Message was edited by: G Lakshmipathi
    Please dont add such text in your post which is not encouraged in SCN.

    TW Typewriter
    can you help, by creating the entire process in Sandbox and informing uday about the configuration steps?
    At the outset, please refrain posting like this which, being a senior member of SCN, you should be aware of rules where spoon feeding is definitely not encouraged.  Those sort of efforts have to be taken by OP.   This forum is only to guide the people wherever they get stucked. 
    cc: Phanikumar V
    You should also be knowing the forum rules and I thought, you would have expressed like what I said above.
    G. Lakshmipathi

  • Single Invoice with reference to 2 Sales Order

    Hi,
    How can i make a single  billing invoice no (vf01) with reference to 2 sales order?
    billing plan has been maintained from each sales order,we dont have any pgi process.
    so process is sales order->billing plan-> invoice
    my user want to generate single invoice with reference to 2 sales order - same customer no.

    For processing  billing due list (VF04) - The system combines documents with the same customer number, proposal billing type and sales organization, and attempts to include them all in the same billing document. If the preconditions are met, then a single invoice is created for the deliveries and/or orders.
    To do a collective billing. Collective Billing Documents
    The selected documents in the billing due list are billed. The system tries to combine them as much as possible. Processing of the selected documents is carried out in the background. After processing of the documents, you return to the billing due list. The sysytem will indicate whether or not a document has been billed successfully.
    If successful, then Save
    You can also carry out a simulation of billing. In this case, select Simulate. The system simulates the collective billing / online function described above.
    -After the collective run you can display a log for the collective run. This displays possible errors during billing.
    -You can also branch to the resulting billing documents, in order to carry out a split analysis.
    -The billing documents of a collective run can also be canceled.
    Re: VF04
    Hope it assist you.
    Thanks & Regards
    JP

Maybe you are looking for