Change in budget profile
Dear Gurus,
Greetings,
Please suggest me can I uncheck overall budget values in budget profile. already we have been using budget profile which is both oevrall values and annual values is checked. its configured 2 years back. Now I want to use on annual values budget profile.
My querries is can i uncheck over all values in between project duration?, is there any adverse impact on project? , wheteher any reconstruction program is needed for the exixsting project?
Please revert.
and thanx in advance
Hi,
mohd ansari wrote:
My querries is can i uncheck over all values in between project duration?, is there any adverse impact on project? , wheteher any reconstruction program is needed for the exixsting project?
Impact: No impact on existing project budget consumption. Budget profile changes will impact project if you was using only annual or only overall. And also that needs some manual work.
Reconstruction Needed: Yes, it will correct if some inconsistencies occur. Run CJEN and CJBN in sequence after changes in budget profile
Note: Don't forget to run a cycle in testing server to double sure.
Regards
Shishir
Similar Messages
-
Hi Experts,
After creating a project in CJ20N and then saving it, I need to change the budget profile. However after opening the project again the budget profile was greyed up and it did not allow me to change the budget profile.
I hope someone can advice me on how I can solve this issue or which T-code I could use to configure this. Thanks.Hello,
The system settings since the budget profile is greyed out:
Go to the field selection of project profile
check if it is in the hidden/display mode.
Then try to enable it to required/input mode.
It should work
While a WBS is budgeted and then the profile is changed, the new settings take place for existing structure and new structure creation. Hence the field selection is hidden for budget profiles in the project proflie field so that you will not be able to change the budget proflie.
Thanks
Vittal -
Assign plan/budget profile for internal order
i just tried to use T-code KO22 to do change budget for an order, but error msg show 'Assign a plan or Budget profile to the object'.so i wonder how to create the plan or Budget profile and assigned it? waiting for your answer....
Hi,
maintenance for budgeting profiles: T-code OKOB
assignment to internal order types: T-code KOAB.
Best regards, Christian -
HI,
I am going for BCS from FB at the end of fiscal year,
Can you explain me, how i used the budget profile for blocking the next fiscal year,
so that no one can entered use Former budgeting in next fiscal year ?
Thanks
NileshDear Nilesh,
This is a situation that will not occur, whenever you implement BCS, former budgeting will be not active anymore. But you should consider a migration project this change to BCS.
Please check the customizing settings and also the documentation available in front of each line of the path below:
SPRO -> Public Sector Management -> Funds Management Government -> Budget Control System (BCS) -> Migration of Former Budgeting to BCS and all subitems:
Overview of Migration Activities
Display Assignment Rules for Budgeting Process
Display Assignment Rules for Value Type
Define Derivation Strategy for Header Data
Define Derivation Strategy for Line Items
Activate Full Migration for Carryover Documents
Migrate Budget Totals
Migrate Budget Documents
Migrate Cover Pools and Unilateral CE Rules
Please check also the following link in help.sap.com
http://help.sap.com/erp2005_ehp_04/helpdata/en/7b/981b57da056c48904c8a9c0df67b51/frameset.htm
And all the subitems available there.
Check also the note:
956356 Migration from 4.6C FI-FM and former FI-FM releases to BCS
788434 Allow additive mode in totals migration
I hope that this answer your inquiry.
Best Regards,
Vanessa Barth. -
My iSight is not recognized by my mac, even in the picture changing of my profile. Can anyone help?
http://discussions.apple.com/docs/DOC-6431
-
To change user status profile on sales order at run time.
Hi Experts,
We have defined status profile for Sales returns ( Doc type RE) which blocks the return order on creation. There are two statuses here which are to remove the delivery block and to remove the billing block by authorised users.
The requirement is now to have a three level block ( three statuses ) on the same document. We can create a new status profile and assign it to a new return sales order tpye but we want to avoid creating new document types. Since this document type is used across various companies in the group we can not assign a new profile on the existing RE document as well.
My question to all experts is
Is it possible to dynamically change the status profile assigned to the document type based on characterstics like sales org or company code etc? If any body has done this please let me know the user exit , function module, BADI etc where the necessary coding has been done.
Helpful answers will be rewarded with points.
I look forward to your co operation.
Regards,
Kartik ShahHi Liam,
In the Program MV45AFZZ in the FORM userexit_save_document
you use the following fn module to change the user status
'STATUS_CHANGE_EXTERN'
Example
IF t180-trtyp = 'H'. "Only creation time
READ TABLE xvbap WITH KEY matnr = c_matnr.
IF sy-subrc = 0. "If above material exist then change status
LOOP AT xvbap WHERE cuobj NE space
AND matnr = c_matnr.
l_objnr = xvbap-objnr.
CALL FUNCTION 'STATUS_CHANGE_EXTERN'
EXPORTING
objnr = l_objnr
user_status = 'E0013' "Send ej IDOC
set_chgkz = 'X'
EXCEPTIONS
object_not_found = 1
status_inconsistent = 2
status_not_allowed = 3
OTHERS = 4.
ENDLOOP.
ENDIF.
sy-subrc = 0. "Restore the previous condition
ENDIF.
Reward if helpful ********* -
How to change a status profile from existing in CRM 7.0?
Hi,
This is the scenario for which I need to change the existing status profile :
We are using categories such as Maintenance , Approvals etc.
There is a huge list of options which comes when we choose the category. We have assigned a status profile to each of these categories.
So for e,g when I choose Maintenance, it also displays other options not related to Maintenance.
Q 1) how to I change the status profile on this??
I tried using CRM_STATUS_PROFILE_CHANGE but it doesnot work
CALL FUNCTION 'CRM_STATUS_PROFILE_CHANGE'
EXPORTING
OBJNR = iv_guid
STSMA = 'ZV001'
XNOAUTO =
X_NOACTIVITY = ' '
EXCEPTIONS
OBJECT_NOT_FOUND = 1
NO_STSMA_CHANGE_POSSIBLE = 2
STSMA_NOT_FOUND = 3
ERROR_OCCURRED = 4
OTHERS = 5
Q 2) If the above is not the right way is there a possibilty to hide the statuses ??
Thanks and Regards,
NarayaniHi,
I am not so clear about your requirement, would you please try to make it clearer.
Which transactions are you assigning the status profile to?
And what is the "categories" do you mean? As I could guess it is the item within the status profile, isn't it?
For example you have a status profile defined as
10 xx01
20 xx02
30 Maintenance
40 xx03
50 Approvals
60 xx04
Is it like the above? Or else, please clarify.
Thanks,
Hongyan -
Assign Plan/Budget profile to Internal Order
While executing KO22 for particular internal order for order type 0800, I am getting the error - Assign Plan/Budget profile to the object.
GMRhi
while defining the order type in IMG ,you have to define the buget profile and then check
regards
thyagarajan -
Change the status profile assigned to the line item from PROFA TO PROFB
Hi Experts,
The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
Item Category A -> Status Profile PROFA
Item Category B -> Status Profile PROFB
For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B. However the status profile still remains PROFA.
We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
any quick inputs from any one please......
Thanks in advance
hemanthHi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR -
Accommodate structure changes in Budget Application for each year
every year our cost center structure changes to accomplish that we are creating New Budget Application every year . Cost center structure is divided in to Area then region and then csc. These Regions never stays under same Area they change it every year
can anyone suggest out a way to do it in only one Budget Application instead of creating new Application every year ?
How can we Accommodate structure changes in Budget Application for each year?
thanks in advance for the suggestionsAssuming the cost centers stay the same, and only the hierarchy of the dimension changes, it's really quite simple.
Export the level 0 data, clear the database, update outline, import the level 0 export file, agg database. You should now have the new totals.
All of this can be done in place without the export/import of data as well, but it is a good practice to export/clear db/import the data for defrag purposes.
Some things to consider, if the organization will want to compare year over year company totals...
1. They need to create some governance around newly inactive cost centers, usually you create some sort of "Inactive" parent in the dimension and when they are no longer active they need to be reassigned to this "inactive" parent. This will ensure that at least the company total stays the same.
2. Following #1, they need to understand that the year over year totals will may only be accurate at Company total (including the Inactive rollup) and at cost center.
Robert -
Budget Exceeded Issue - Activated budget profile for existing project
Dear Experts,
I have a Project and not using any budget profile, already actual data exist only in CJI3 no data in CJI5.
Now I assigned Budget Profile in that project.
While entering Budget in T-code CJ30, I can see values in assigned values for a wbs elements.
Example -
WBS Element - XXXXXX-02 - 2000 (Assigned) - Here Budget Profile not assigned in the project
Same WBS Element - Once Budget Profile assigned, when am assigning same 2000 budget am getting budget exceeded issue.
If I give 2500 I am not getting any errors, My tolerance as only Warning message.
Please Suggest - Screenshot attached
Thanks,Hi Pavan,
As soon you enter your budgeting fig the availability control triggers, this check your assignment with available budget.this the reason you are getting error as you say there are already actual posting in CJI3.In this you need to balance first the fig which is appear in assigned column in CJ30.
Its a good practice to give budget first release it & then start procurement,confirmation etc.
Check this in budget profile availability control.
Regards,
Sachin. -
Data access in reports after changing Member Access profile
Hi All
I made changes in the member access profile of a user (while current system was available for User Planning).
After making and applying these changes in Access profile, the Current view in the report accessible to user got updated.
But the problem was in reporting, where the updates didnot happen.
Please suggest for necessary steps so that user get updated report as per change in Member access profile.
Thanks in advance.
Regards
AbhishekHi Lokesh
Thanks for the reply.
1. Report is based on CV
2. With another ID assigned to same member access profile, the report is showing complete data.
I mean with X user id 100 data sets are showing while with Y user id only 95 data sets. Where both X and Y are having same Member Access Profiles.
Regards
Abhishek -
Maintain Budget Profile for PM Order Type
Hi,
While trying to maintain the budget profile in Order types, budget profile couldnt be found for PM orders order type like PM01, PM02, etc., Order Types configuration has the budgeting profile. But still its not coming in KOAB where budget profile will be maintained for order types.
Please provide me the solution.
Regards,
Maheswaran.
Edited by: Maheswaran.K on Jul 29, 2009 1:38 PMHi,
Budget profile has been maintained in OIOA. But its not coming in KOAB.
Regards,
Maheswaran. -
Assigning budget profile to already existing project
Hi All,
Please suggest how can we assign budget profile to already existing project .Hi Vishal,
You can go the Project builder, open the particular project and in the detail screen of the project definition, enter the budget profile in the control data tab page.
Or goto SPRO->Project system->Costs->Budget->Stipulate default budget profile for Project definition and assing the bedget profile.
Or enter the Budget profile in the Controlling tab page of the Project profile.
You can do all these for existing projects.
regards
Pratap.V -
Allocation of Budget profile to order type
Dear Gurus;
I can create budget for order / order group by tcode: KO22, supplement the budget by KO24.
But how do I assign a plan/ budget profile to an order type?
Thanks & Regards
Hemant RoplekarHello Paul;
I think by assigning availability control to order types either by activation type 1(automatically) or by activation type 2 & then running KO30; will only bring in the tolerance limits & budget control for those order types.
But if I have to allocate budget to any order or order group I have to do it through KO22, I don't find any alternative to this.
Means, I can only assign budget to orders & NOT to order types. Which further implies that, I can budget only existing orders. Not all orders originating from a particular order type in a year???
Thanks for your valuable input.
Regards
Hemant
Maybe you are looking for
-
I posted on his forum, but he takes like two days to respond.... I was posting a microsite on my main host: http://www.northstarmultimedia.com/mranracingpix/contact_us.html but, it does not work here now: http://www.mranracingpix.com/contact_us.html
-
Pleasse help me with this error in SQL statement
Please tell me the error in this query: the Error given is java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement given : Databse is MS Access In the databse : account - text number - text date - date/t
-
How to set a encrypted value on a ConfigurationProperty when working offlin
So, I have a particular instance of configuration property that I am trying to modify when working on a domain offline, in particular during the configuration of a domain template in final.py. wls:/offline>ls() -rw- EncryptValueRequired true -rw- Enc
-
OSPF Equal Cost Path Selection
This is a nerdy enough qeury in reality. We have a single area - area 0.0.0.32. All intra-area routes. We have 2 switches in the core of the network, and 10 switches at the edge. All of these switches are connected via layer 3 OSPF routed links. The
-
After having read a similar thread (What happened to exposure-related EXIF values in the Metadata panel?) which doesn't really answer my question, I got to start a new one: 1) In my Bridge CS5 I want to know the "Exposure" entry with info like "1/50