Change in layout

Hi guys
Just to let you know we are making a slight change in the layout to the board. Basically we are splitting up Smartphones into:
N-series Devices (N70, N80, N95 etc) and Smartphones (3250, 6680, 6630 etc)
E-series devices (E50, E60, E61 etc) and Communicators (9300, 9300i and 9500)
This may affect some of your subscriptions, as we will be moving threads between the boards. If you made a post in the thread you can click on posts on the right hand side under My information, otherwise please use the search facility under search discussions.
Regards
Ajak

_rob_, richcowell and korngear - your views pretty much sum up the pros and cons we discussed internally.
We hope this change makes it faster to find posts about one's own phone model, but it will also lead to some duplicate posts where an N95 owner will ask the same question as an E65 owner.
All in all we thought this is an improvement - and really quick to implement without completely redesigning the main page and the board categories.Message Edited by vandelay on 23-May-2007 04:21 PM
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

Similar Messages

ABAP Dump while Changing the Layout fields in Report output - RCOPCA02

Hi,
I Copied the Standard Program RCOPCA02 to ZRCOPCA02. I added two new fields(AUART, AUGRU) in the report output. It is executing correctly with default layout, While Changing the layout for displaying new fields it is dumping.
I am not understanding, What should i do...
Here is the Code.
report ZRCOPCA02 no standard page heading message-id km
                line-count (2) line-size 81.
type-pools: slis, ecarc.
DDIC-Tabellen *******************************************************
tables: glpca,                         "Einzelposten / Ist
        glu1,                          "Übergabestruktur FI-SL-Anzeige
        t000,
        tka01,
        sscrfields,
        vbak.
Variablen und int. Tabellen *****************************************
data: l_vbeln like vbak-vbeln,
l_auart like vbak-auart,
l_augru like vbak-augru.
data: afield type slis_fieldcat_alv,
sp_group type slis_sp_group_alv,
t_listheader type slis_t_listheader with header line,
t_layout type slis_layout_alv,
t_fieldcat type slis_t_fieldcat_alv,
t_spec_groups type slis_t_sp_group_alv,
event type slis_alv_event,
t_events type slis_t_event,
g_variant like disvariant,
gx_variant like disvariant,
g_exit(1) type c,
g_save(1) type c,
g_repid like sy-repid,
msgtyp like sy-msgty,
lt_dynpread like dynpread occurs 1 with header line,
ls_rpcak like rpcak, "note 0310592
packsize type i value 1000,
text1(60) type c,
text2(60) type c,
oldkokrs like glpca-kokrs,
oldracct like glpca-racct.
data: whr_size type i value 50,"Maximum of single values per MIC 46a
"charact. in the where-clause of the select-statement
lines type i, "number of lines of range table MIC 46a
cnt_rldnr type i, "Zähler Anzahl selektierter Ledger
cnt_kokrs type i, "Zähler Anzahl selektierter KoReKreise
cnt_poper type i, "Zähler Anzahl selektierter Perioden
cnt_ryear type i, "Zähler Anzahl selektierter GeschJahre
cnt_rvers type i, "Zähler Anzahl selektierter Versionen
cnt_bukrs type i, "Zähler Anzahl selektierter BuKreise
empge like dkobr-empge,
ksl_curr like tka01-pcacur,
hsl_curr like t001-waers,
a_rec like rstirec.
data: begin of dim_data.
include structure rgcdi. "data for dimensions
data: end of dim_data.
data: begin of tab_fields occurs 80,
name like dntab-fieldname, "fields in table i_glpca
end of tab_fields.
data: begin of i_glpca occurs 0.
include structure rpca2.
data: racct_ktext like rpcak-ktext,
psppp like prps-posid,
v_auart like vbak-auart,
v_augru like vbak-augru,
      end of i_glpca.
data: rw_subrc   like sy-subrc,      "Flag: Report-Writer-Schnittstelle
      re_subrc   like sy-subrc,        "Flag: Recherche-Schnittstelle
      subrc      like sy-subrc.
data: set_id    like sethier-setid,    "Set-ID        "RDI_SETS_4.0
      set_class like sethier-setclass, "Setklasse     "RDI_SETS_4.0
      set_sname like sethier-shortname."Setname (24) "RDI_SETS_4.0
data: authorised(1),
      s_message(1),
      auth_dbcount like sy-tabix,
    Hex-Konstanten für Minimum/Maximum-Werte
      begin of hex00,
        x1(12) type c,
        x2(12) type c,
      end of hex00,
      begin of hexff,
        x1(12) type c,
        x2(12) type c,
      end of hexff.
ranges rclnt for glpca-rclnt.
field-symbols: type ecarc_glpca_curr.
Selektionsoptionen *************************************************
select-options:
rldnr    for glpca-rldnr   default '8A' no-display,
rassc    for glpca-rassc                no-display,
rrcty    for glpca-rrcty   default 0,
rrcty    for glpca-rrcty,
rvers    for glpca-rvers   default '000',
kokrs    for glpca-kokrs   memory id cac,
bukrs    for glpca-rbukrs memory id buk,
poper    for glpca-poper   default sy-datlo+4(2),
ryear    for glpca-ryear   default sy-datlo,
poper    for glpca-poper,
ryear    for glpca-ryear,
prctr    for glpca-rprctr matchcode object prct,
pprctr   for glpca-sprctr matchcode object prct,
RACCT    FOR GLPCA-RACCT   MATCHCODE OBJECT KART,      "RD_P30K128304
racct    for glpca-racct,            "RD_P30K128304
drcrk    for glpca-drcrk,
activ    for glpca-activ,
rhoart   for glpca-rhoart,
rfarea   for glpca-rfarea,
stagr    for glpca-stagr,
rtcur    for glpca-rtcur,
runit    for glpca-runit,
versa    for glpca-versa no-display,
eprctr   for glpca-eprctr no-display,
afabe    for glpca-afabe no-display,
rmvct    for glpca-rmvct no-display,
hrkft    for glpca-hrkft no-display, "note 550972
sbukrs   for glpca-sbukrs no-display, "note 550972
shoart   for glpca-shoart no-display, "note 550972
sfarea   for glpca-sfarea no-display, "note 550972
docct    for glpca-docct,
docnr    for glpca-docnr,
refdocct for glpca-refdocct,
refdocnr for glpca-refdocnr,
werks    for glpca-werks,
repmatnr for glpca-rep_matnr matchcode object pca_shlp_rep_matnr,
rscope   for glpca-rscope.
parameters: no_rrint no-display default ' '." skip       "MICP40K066037
" report-report-interface
display variant                                       ">>MICP40K039857
selection-screen begin of block 0 with frame title text-e01.
parameters: p_vari like disvariant-variant.
selection-screen comment 47(40) varname for field p_vari.
selection-screen end of block 0.
parameters log_grp(4) type c no-display default 'KE5Z'.
"<<MICP40K039857
ranges: v_racct for glpca-racct,
        v_prctr for glpca-rprctr,
        v_pprctr for glpca-sprctr.
Tabelle mit Werten aus den Berichts-Set vom Report-Writer           *
data begin of val_tab occurs 50.
        include structure rgciv.
data end of val_tab.
       MICP30K166368
feldkatalog und interface für bb-schnittstelle rw        MICP30K166368
       MICP30K166368
"MICP30K166368
data begin of bbs_fieldtab occurs 20. "MICP30K166368
        include structure rstifields. "MICP30K166368
data end of bbs_fieldtab.             "MICP30K166368
archiv
type-pools: rsds.
types:      begin of ty_archive_objects,
               object       like arch_obj-object,
            end   of ty_archive_objects,
            ty_t_archive_objects type ty_archive_objects occurs 2.
constants: lc_set          type c           value 'X',
            lc_report       type progname    value 'KE5Z',
            lc_reporttype   type reporttype value 'TR'.
tables:     admi_files.
select-options lr_files for admi_files-archiv_key no-display.
parameter: read_db       type c            default 'X' no-display,
            read_ar       type c                        no-display,
            arc_obj       like arch_obj-object          no-display,
            read_as       type c            default 'X' no-display.
data :     lt_arch_obj     type ty_t_archive_objects with header line,
            ls_selections   type rsds_frange,
            lt_selections   type rsds_frange_t,
            ls_selopt type rsdsselopt,
            lt_glpca_archiv type ecarc_t_glpca_curr.
*********************************************************>>MICP40K039857
INITIALIZATION
initialization.
Diverse Initialisierungen
perform init_vars.
g_repid = sy-repid.
Set default values for record type
rrcty-sign = 'I'.
rrcty-option = 'EQ'.
rrcty-low    = '0'.
append rrcty.
rrcty-low = '2'.
append rrcty.
Set default values for period and year (if kokrs or bukrs is known)
get parameter id 'BUK' field bukrs-low.
get parameter id 'CAC' field kokrs-low.
if     kokrs-low is initial       "get contr. area from company code
     and not bukrs-low is initial.
    call function 'KOKRS_GET_FROM_BUKRS'
      exporting
        i_bukrs        = bukrs-low
      importing
        e_kokrs        = kokrs-low
      exceptions
        no_kokrs_found = 1
        others         = 2.
    if sy-subrc <> 0.
      clear kokrs-low.
    endif.
endif.
if not kokrs-low is initial.
    call function 'K_KOKRS_READ'       "get fiscal year variant
         exporting
              kokrs           = kokrs-low
          importing
              e_tka01         = tka01
        exceptions
              not_found       = 1
              not_found_gjahr = 2
              others          = 3.
    if sy-subrc = 0.
      call function 'G_PERIOD_GET'
        exporting
          date                           = sy-datlo
          variant                        = tka01-lmona
        importing
          period                         = poper-low
          year                           = ryear-low
        exceptions
          ledger_not_assigned_to_company = 1
          period_not_defined             = 2
          variant_not_defined            = 3
          others                         = 4.
      if sy-subrc = 0.
        poper-sign = 'I'.
        poper-option = 'EQ'.
        append poper.
        ryear-sign = 'I'.
        ryear-option = 'EQ'.
        append ryear.
      endif.
    endif.
endif.
Settings for display variants
g_save = 'A'. "Schalter Varianten benutz./allg. speichern
clear g_variant.
g_variant-report = g_repid.
g_variant-log_group = log_grp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
    exporting
      i_save     = g_save
    changing
      cs_variant = gx_variant
    exceptions
      not_found = 2.
if sy-subrc = 0.
    p_vari = gx_variant-variant.
endif.
Set variant
if p_vari is initial.
    p_vari = '1SAP'.
    move p_vari to gx_variant-variant.
    call function 'REUSE_ALV_VARIANT_EXISTENCE'
      exporting
        i_save     = g_save
      changing
        cs_variant = gx_variant
      exceptions
        not_found = 1.
    if sy-subrc ne 0.
      clear p_vari.
      clear gx_variant-variant.
    endif.
endif.
varname = gx_variant-text.
"<<MICP40K039857
archiv
call function 'KARL_DATA_INPUT_INIT'
    exporting
      i_report     = lc_report
      i_reporttype = lc_reporttype
    importing
      e_xusedb     = read_db
      e_xusear     = read_ar
      e_archobj    = arc_obj
      e_infosys    = read_as
    tables
      t_arch_sel   = lr_files.
data: lt_excluding like sy-ucomm occurs 0 with header line.
call function 'RS_SET_SELSCREEN_STATUS'
    exporting
      p_status = 'SELSCREEN'
      p_program = 'RCOPCA02'
    tables
      p_exclude = lt_excluding.
Initialisieren der Bericht/Bericht-Schnittstellen                   *
data: ld_no_rrint type boole_d.      "note 490484 begin
import rri = ld_no_rrint from memory id 'RCOPCA02_NO_RRI'.
if ld_no_rrint = 'X'.
    free memory id 'RCOPCA02_NO_RRI'.
else.                                "note 490484 end
    call function 'G_REPORT_INTERFACE_INIT'   "Report-Writer?
        exporting                      "MICP30K166368
             table = 'GLPCT'           "MICP30K166368
         importing
             subrc = rw_subrc          "MICP30K166368
        tables                         "MICP30K166368
             it_fieldr = bbs_fieldtab. "MICP30K166368
    call function 'RSTI_APPL_STACK_POP'"oder Recherche?
         importing
              i_rec                      = a_rec
         exceptions
              appl_stack_not_initialized = 1.
    re_subrc = sy-subrc.
    if re_subrc = 0.
   check Receiver is this report
      if not ( ( a_rec-rtool = 'RT' and a_rec-ronam = 'RCOPCA02' )
               or ( a_rec-rtool = 'TR' and a_rec-ronam = 'KE5Z' ) ) .
        re_subrc = 2.
      endif.
    endif.
endif.
AT SELCTION-SCREEN on value request**********************************
*at selection-screen on value-request for racct-low.          "RD "4.6a
                                                            "RD "4.6a
call function 'K_RACCT_VALUE_REQUEST'                       "RD "4.6a
     importing                                              "RD "4.6a
          e_racct      = racct-low.                         "RD "4.6a
                                                            "RD "4.6a
                                                            "RD "4.6a
*at selection-screen on value-request for racct-high.         "RD "4.6a
                                                            "RD "4.6a
call function 'K_RACCT_VALUE_REQUEST'                       "RD "4.6a
     importing                                              "RD "4.6a
          e_racct      = racct-high.                        "RD "4.6a
at selection-screen on value-request for p_vari.         "MICP40K039857
perform f4_for_variant.              "MICP40K039857
at selection-screen on value-request for poper-low.         "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
    exporting
      kokrs           = kokrs-low
    exceptions
      not_found       = 1
      not_found_gjahr = 2
      others          = 3.
if sy-subrc = 0.
end of insertion note 522715
    call function 'ECPCA_RPMAX_VALUE_REQUEST'               "RD "4.6a
         exporting                                          "RD "4.6a
              i_kokrs     = kokrs-low                       "RD "4.6a
              i_ryear     = ryear-low                       "RD "4.6a
         importing                                          "RD "4.6a
              e_rpmax     = poper-low                       "RD "4.6a
begin of insertion note 522715
         exceptions
              table_empty = 1.
endif.
end of insertion note 522715
at selection-screen on value-request for poper-high.        "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
    exporting
      kokrs           = kokrs-low
    exceptions
      not_found       = 1
      not_found_gjahr = 2
      others          = 3.
if sy-subrc = 0.
end of insertion note 522715
    call function 'ECPCA_RPMAX_VALUE_REQUEST'               "RD "4.6a
         exporting                                          "RD "4.6a
              i_kokrs     = kokrs-low                       "RD "4.6a
              i_ryear     = ryear-low                       "RD "4.6a
         importing                                          "RD "4.6a
              e_rpmax     = poper-high                      "RD "4.6a
begin of insertion note 522715
         exceptions
              table_empty = 1.
endif.
end of insertion note 522715
AT SELCTION-SCREEN ***************************************************
at selection-screen.
perform pai_of_selection_screen.
begin of insertion note 522715
if not kokrs-low is initial.
    call function 'K_KOKRS_READ'
      exporting
        kokrs           = kokrs-low
      exceptions
        not_found       = 1
        not_found_gjahr = 2
        others          = 3.
    if sy-subrc <> 0.
      message e101(ki) with kokrs-low.
    endif.
endif.
end of insertion note 522715
archiv
if sy-ucomm = 'FC01' or sy-ucomm = 'UCDS'
    or sy-ucomm = 'ONLI' and read_ar = 'X'
    and read_as is initial and lr_files[] is initial.
    if lt_arch_obj[] is initial.
      lt_arch_obj-object = 'PCA_OBJECT'. append lt_arch_obj.
      lt_arch_obj-object = 'EC_PCA_ITM'. append lt_arch_obj.
    endif.
    call function 'KARL_DATA_INPUT_SELECT'
      exporting
        i_db_and_arc       = lc_set
        i_infosys_possible = lc_set
        i_object_fixed     = 'V'
        i_documentation    = 'KARL_DATA_INPUT_SEL_KE5YZ'
        i_report           = lc_report
        i_reporttype       = lc_reporttype
      tables
        t_objects          = lt_arch_obj
        t_arch_sel         = lr_files
      changing
        c_xusedb           = read_db
        c_xusear           = read_ar
        c_archobj          = arc_obj
        c_infosys          = read_as.
endif.
START-OF-SELECTION **************************************************
start-of-selection.
Default-Werte löschen, falls Aufruf über Recherche
oder Report-Writer erfolgt ist
if no_rrint is initial and ld_no_rrint is initial.        "note 490484
    if rw_subrc eq 0 or re_subrc eq 0.
      refresh: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
               racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
               versa, afabe, eprctr,
               v_racct, v_prctr, v_pprctr.
      clear:   rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
               racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
               versa, afabe, eprctr,
               v_racct, v_prctr, v_pprctr.
    endif.
Parameter einlesen über Report-Writer-Schnittstelle                 *
    if rw_subrc eq 0.
      perform rw_get_parameters.
oder Parameter einlesen über Recherche-Schnittstelle                *
    elseif re_subrc eq 0.
      perform re_get_parameters.
    endif.
endif.
if read_db = 'X'.                     " read from DB (archiv)
Bewegungsdaten einlesen und puffern...................................
    call function 'SAPGUI_PROGRESS_INDICATOR'
      exporting
        text = 'Einzelposten selektieren'(p10).
Use dirty trick to mislead DB-optimizer
    call function 'DB_DO_NOT_USE_CLIENT_INDEX'
      exporting
        value    = sy-mandt
      tables
        mandttab = rclnt.
    select (tab_fields) from glpca
       client specified
       package size packsize
      APPENDING CORRESPONDING FIELDS OF TABLE i_glpcaO
        into corresponding fields of table i_glpca
       where rldnr     in rldnr
         and rrcty     in rrcty
         and rvers     in rvers
         and kokrs     in kokrs
         and rbukrs    in bukrs
         and ryear     in ryear
         and rassc     in rassc
         and hrkft     in hrkft   "note 550972
         and sbukrs    in sbukrs "note 550972
         and shoart    in shoart "note 550972
         and sfarea    in sfarea "note 550972
         and racct     in racct
         and rprctr    in prctr
         and sprctr    in pprctr
         and poper     in poper
         and drcrk     in drcrk
         and activ     in activ
         and rhoart    in rhoart
         and rfarea    in rfarea
         and versa     in versa
         and eprctr    in eprctr
         and afabe     in afabe
         and rmvct     in rmvct
         and docct     in docct
         and docnr     in docnr
         and stagr     in stagr
         and rtcur     in rtcur
         and runit     in runit
         and refdocct in refdocct
         and refdocnr in refdocnr
         and werks     in werks
         and rep_matnr in repmatnr       "RDIP40K020663
         and rscope    in rscope         "RDIP40K020663
      and rclnt     in rclnt.       "dirty trick to mislead DB-optimizer
      if sy-dbcnt > 1.
        text1 = sy-dbcnt.
        condense text1.
        concatenate text1 text-m01 into text2 separated by space.
        call function 'SAPGUI_PROGRESS_INDICATOR'
          exporting
            text = text2.          " ... Datensätze gelesen
      endif.
    endselect.
Entfernt nicht zugehörige Einträge....................................
    loop at i_glpca where ( not rprctr in v_prctr )
                       or ( not sprctr in v_pprctr )
                       or ( not racct in v_racct ).
      delete i_glpca.
    endloop.
endif.
*archiv
if read_ar = 'X' and not
    ( read_as is initial and lr_files[] is initial ).
    call function 'SAPGUI_PROGRESS_INDICATOR'
      exporting
        text = 'Lesen im Archiv'(p12).
    define fill_lt_selections.
      if not &2[] is initial.
        clear ls_selections.
        move &1 to ls_selections-fieldname.
        loop at &2.
          clear ls_selopt.
          move-corresponding &2 to ls_selopt.
          append ls_selopt to ls_selections-selopt_t.
        endloop.
        append ls_selections to lt_selections.
      endif.
    end-of-definition.
    fill_lt_selections 'RLDNR' rldnr.
    fill_lt_selections 'RRCTY' rrcty.
    fill_lt_selections 'RVERS' rvers.
    fill_lt_selections 'KOKRS' kokrs.
    fill_lt_selections 'RBUKRS' bukrs.
    fill_lt_selections 'POPER' poper.
    fill_lt_selections 'RYEAR' ryear.
    fill_lt_selections 'RPRCTR' prctr.
    fill_lt_selections 'SPRCTR' pprctr.
    fill_lt_selections 'RACCT' racct.
    fill_lt_selections 'DRCRK' drcrk.
    fill_lt_selections 'ACTIV' activ.
    fill_lt_selections 'RHOART' rhoart.
    fill_lt_selections 'RFAREA' rfarea.    "note 401961
    fill_lt_selections 'STAGR' stagr.
    fill_lt_selections 'RTCUR' rtcur.
    fill_lt_selections 'RUNIT' runit.
    fill_lt_selections 'VERSA' versa.
    fill_lt_selections 'EPRCTR' eprctr.
    fill_lt_selections 'AFABE' afabe.
    fill_lt_selections 'RMVCT' rmvct.
    fill_lt_selections 'DOCCT' docct.
    fill_lt_selections 'DOCNR' docnr.
    fill_lt_selections 'REFDOCCT' refdocct.
    fill_lt_selections 'REFDOCNR' refdocnr.
    fill_lt_selections 'WERKS' werks.
    fill_lt_selections 'REP_MATNR' repmatnr.
    fill_lt_selections 'RSCOPE' rscope.
    fill_lt_selections 'HRKFT' hrkft.   "note 550972
    fill_lt_selections 'SBUKRS' sbukrs. "note 550972
    fill_lt_selections 'SHOART' shoart. "note 550972
    fill_lt_selections 'SFAREA' sfarea. "note 550972
    call function 'EC_PCA_SELECT_FROM_ARCHIVE'
      exporting
        i_selections            = lt_selections[]
        i_files_sequential_read = lr_files[]
      importing
        e_glpca                 = lt_glpca_archiv[]
      exceptions
        no_infostruc_found      = 1.
    if sy-subrc = 1.
      message id sy-msgid type 'I' number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    clear i_glpca.
    loop at lt_glpca_archiv assigning to i_glpca.
      append i_glpca.
    endloop.
endif.
if i_glpca[] is initial.         "Info,nichts gefunden
    message s000.
    exit.
endif.
get texts for accounts ...............................................
sort i_glpca by kokrs racct.
loop at i_glpca assigning -racct_ktext = ls_rpcak-ktext.
endloop.
Liste mit Einzelposten geeignet sortieren.............................
call function 'SAPGUI_PROGRESS_INDICATOR'
    exporting
      text = 'Einzelposten sortieren'(p30).
if show_ref is initial.
   sort i_glpca by rldnr ryear rbukrs rrcty rvers
                   docct docnr docln.
else.
sort i_glpca by rldnr kokrs ryear rbukrs rrcty rvers poper
                  refdocct refdocnr refdocln.
endif.
Berechtigungsprüfung und gemerkte Belege aufbereiten .................
call function 'SAPGUI_PROGRESS_INDICATOR'
    exporting
      text = 'Berechtigungsprüfungen'(p40).
clear: cnt_rldnr, cnt_kokrs, cnt_ryear, cnt_rvers, cnt_bukrs.
loop at i_glpca assigning .
Berechtigungscheck
    perform check_repo_authority changing authorised.
    if authorised is initial.
      delete i_glpca.
      s_message = 'X'.
    zählen der Sätze ohne Berechtigung
      auth_dbcount = auth_dbcount + 1.
    else. "Weitere Bearbeitung nur für berechtigte Belege...
    Zusätzlich merken der Anzahl der Ausprägungen
    bestimmter Dimensionen
      on change of -rbukrs
            ct       = '10'
          importing
            currency = hsl_curr.
      endon.
    externe Immobilienbezeichnung                     "ww/kb
    on change of i_glpca-imkey.
      if ( not -dabrz
                I_length   = 20
             importing
                  e_empge    = -konty.
        endif.
      CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
      endif.
    endon.
    on change of i_glpca-dabrz.
       call function 'REMD_IMKEY_TO_EMPGE'
            exporting
                 i_imkey    = i_glpca-imkey
                 i_dabrz    = i_glpca-dabrz
                i_length   = 20
            importing
                 e_empge    = i_glpca-empge
                 e_konty    = i_glpca-konty.
      CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
     endon.
    Konvertierungsproblem mit PSP-Nummer bereinigen
      if not -psppp.
        endif.
      endif.
    Währungen in Hilfsfeldern speichern
      if -ksl_curr = ksl_curr.
      endif.
    modify i_glpca.
    endif.
endloop.
Nachricht, wenn nicht alle Einzelposten angezeigt werden.
if not s_message is initial.
    message s407(km) with auth_dbcount.
endif.
EP ausgeben...........................................................
call function 'SAPGUI_PROGRESS_INDICATOR'
    exporting
      text = 'Einzelposten ausgeben'(p50).
t_layout-detail_initial_lines = 'X'.
t_layout-detail_popup         = 'X'.
t_layout-f2code               = 'PIC1'.                "MICP40K039857
t_layout-get_selinfos         = 'X'.
t_layout-group_change_edit    = 'X'.                   "note 576149
perform fill_listheader.
perform fieldcat_fill.
perform spec_groups_fill.
perform events_fill.                 "MICP40K039857
">>MICP40K039857
call function 'K_KKB_LIST_DISPLAY'
      exporting
           i_callback_program       = 'RCOPCA02'
           i_callback_user_command = 'USR_CMD'
           i_callback_top_of_page   = 'TOP_OF_PAGE'
          I_CALLBACK_END_OF_PAGE   =
          I_CALLBACK_END_OF_LIST   =
           i_callback_pf_status_set = 'SET_PF_STATUS'
          I_CALLBACK_LAYOUT_SAVE   =
          I_CALLBACK_FIELDCAT_SAVE =
           i_tabname                = 'I_GLPCA'
           is_layout                = t_layout
           it_fieldcat              = t_fieldcat
          I_FCTYPE                 = 'R'
          IT_EXCLUDING             =
           it_special_groups        = t_spec_groups
          IT_SORT                  =
          IS_SEL_HIDE              =
          I_SCREEN_START_COLUMN    = 0
          I_SCREEN_START_LINE      = 0
          I_SCREEN_END_COLUMN      = 0
          I_SCREEN_END_LINE        = 0
      tables
           t_outtab                 = i_glpca
      exceptions
           others                   = 1.
loop at i_glpca.
select single vbeln auart augru
into (l_vbeln, l_auart, l_augru)
from vbak where vbeln = i_glpca-aubel.
if sy-subrc = 0.
move l_auart to i_glpca-v_auart.
move l_augru to i_glpca-v_augru.
modify i_glpca.
endif.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
     exporting
        I_INTERFACE_CHECK        = ' '
           i_callback_program       = 'ZRCOPCA02'
           i_callback_pf_status_set = 'SET_PF_STATUS'
           i_callback_user_command = 'USR_CMD'
           i_structure_name         = 'I_GLPCA'
           is_layout                = t_layout
           it_fieldcat              = t_fieldcat
        IT_EXCLUDING             =
           it_special_groups        = t_spec_groups
        IT_SORT                  =
        IT_FILTER                =
        IS_SEL_HIDE              =
           i_default                = 'X'
           i_save                   = g_save
           is_variant               = g_variant
           it_events                = t_events
        IT_EVENT_EXIT            =
        IS_PRINT                 =
        I_SCREEN_START_COLUMN    = 0
        I_SCREEN_START_LINE      = 0
        I_SCREEN_END_COLUMN      = 0
        I_SCREEN_END_LINE        = 0
   IMPORTING
        E_EXIT_CAUSED_BY_CALLER =
        ES_EXIT_CAUSED_BY_USER   =
      tables
           t_outtab                 = i_glpca
    exceptions
         program_error            = 1
         others                   = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
"<<MICP40K039857
clear i_glpca.
*&      Form CHECK_REPO_AUTHORITY
Check only new auth-object K_PCA                                    *
--> p1        text
<-- p2        text
form check_repo_authority changing authorized like authorised.
fill structure for userexit in K_PCA_RESP_AUTHORITY_CHECK
data: auth like pca_i_auth.          "46a MIC check K_PCA and G_GLTP
auth-bukrs = -rrcty.
clear authorized.
check PrCtr/account/activity
call function 'K_PCA_RESP_AUTHORITY_CHECK'
    exporting
      i_kokrs             = -racct
      i_vorgn             = 'REPP'
      i_actvt             = '28'
      i_auth              = auth
      i_no_dialog_message = 'X'
    exceptions
      no_authority        = 1
      data_missing        = 2
      others              = 3.
if sy-subrc = 0.                                          "ok
check ledger/version/record type
    call function 'PCA_G_GLTP_AUTH_CHECK'
      exporting
        rldnr            = -rrcty
      exceptions
        no_authorisation = 1
        others           = 2.
    if sy-subrc = 0.                   "ok, User is authorized
      authorized = 'X'.
    endif.
endif.
endform.                               " CHECK_REPO_AUTHORITY
*&      Form INIT_VARS
      Initialisieren diverser Hilfsvariablen und -tabellen           *
form init_vars.
data begin of nametab occurs 80. "Tabelle mit Feldern aus der RPCA2
          include structure dntab.
data end of nametab.
select single * from t000
                  client specified
                  where mandt = sy-mandt.
refresh nametab.
call function 'NAMETAB_GET'
    exporting
      only    = 'T'
      tabname = 'RPCA2'
    tables
      nametab = nametab.
Übernehmen der Feldnamen, die auch in der GLPCA
vorkommen.
loop at nametab where fieldname ne 'KSL_CURR'
                    and fieldname ne 'HSL_CURR'
                    and fieldname ne 'EMPGE'               "ww/kb
                    and fieldname ne 'KONTY'.              "ww/kb
    move nametab-fieldname to tab_fields-name.
    append tab_fields.
endloop.
fill Fields of receiver for BBS                          "MIC46C
call function 'RSTI_REPORT_FIELDS_FIND'
    exporting
      e_repid   = 'RCOPCA02'
      e_type    = 'R'
    tables
      it_fields = bbs_fieldtab.
correct fieldnames
read table bbs_fieldtab with key rfield = 'PRCTR'.
if sy-subrc = 0.
    bbs_fieldtab-rfield = 'RPRCTR'.
    modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'PPRCTR'.
if sy-subrc = 0.
    bbs_fieldtab-rfield = 'SPRCTR'.
    modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'BUKRS'.
if sy-subrc = 0.
    bbs_fieldtab-rfield = 'RBUKRS'.
    modify bbs_fieldtab index sy-tabix.
endif.
Unicode
class cl_abap_char_utilities definition load.
clear hex00 with cl_abap_char_utilities=>minchar.
clear hexff with cl_abap_char_utilities=>maxchar.
endform.                               " INIT_VARS
      FORM FILL_LISTHEADER                                          *
      List-Header in Abhängigkeit der selektierten Daten            *
form fill_listheader.
read table i_glpca index 1.
if sy-subrc ne 0.
    exit.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Ledger              '(h01).
if cnt_rldnr <= 1.
    t_listheader-info = i_glpca-rldnr.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Kostenrechnungskreis'(h02).
if cnt_kokrs <= 1.
    t_listheader-info = i_glpca-kokrs.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungskreis       '(h03).
if cnt_bukrs <= 1.
    t_listheader-info = i_glpca-rbukrs.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungsperiode     '(h04).
if cnt_poper <= 1.
    t_listheader-info = i_glpca-poper.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
if cnt_ryear <= 1.
    t_listheader-typ = 'S'.
    t_listheader-key = 'Geschäftsjahr       '(h05).
    t_listheader-info = i_glpca-ryear.
    append t_listheader.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Version             '(h06).
if cnt_rvers <= 1.
    t_listheader-info = i_glpca-rvers.
else.
    t_listheader-info = '*'.
endif.
append t_listheader.
endform.                    "fill_listheader
*&      Form FIELDCAT_FILL
*&      Aufbau des Feldkataloges für den K_KKB_LIST_DISPLAY,           *
*&      bzw REUSE_ALV_LIST_DISPLAY,                                    *
*&      weitere Infos enthält die FktBaustein-Doku                     *
form fieldcat_fill.
data: i type i value 0.
refresh t_fieldcat.
Ledger
if cnt_rldnr > 1.
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'RLDNR'.
afield-no_sum      = 'X'.
afield-no_out      = 'X'.
afield-key         = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
endif.
Satzart
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'RRCTY'.
afield-no_sum      = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out      = 'X'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
Version
if cnt_rvers > 1.
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'RVERS'.
afield-no_sum      = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out      = 'X'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
endif.
Periode
if cnt_poper > 1.
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'POPER'.
afield-no_sum      = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out      = 'X'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
endif.
Geschäftsjahr
if cnt_ryear > 1.
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'RYEAR'.
afield-no_sum      = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out      = 'X'.
afield-sp_group    = '1'.
append afield to t_fieldcat.
endif.
Referenzbelegtyp
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'REFDOCCT'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel     = 'X'.
afield-no_sum      = 'X'.
afield-sp_group    = '2'.
afield-seltext_s   = 'Typ'(t01).
afield-seltext_m   = 'Belegtyp'(t02).
afield-seltext_l   = 'Ref.Belegtyp'(t03).
afield-outputlen   = 3. "Platz für die Sterne der Zwischensummen
if not show_ref is initial.
afield-key = 'X'.
else.
   afield-no_out = 'X'.
endif.
append afield to t_fieldcat.
Referenzbelegnummer
add 1 to i.
clear afield.
afield-col_pos     = i.
afield-fieldname   = 'REFDOCNR'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel     = 'X'.
afield-no_sum      = 'X'.
afield-sp_group    = '2'.
afield-seltext_s = 'Refbeleg'(t04).
afield-seltext_m = 'Refbelegnr'(t05).
afield-seltext_l = 'Ref.Belegnummer'(t06).
if not show_ref is initial.
afield-key = 'X'.
else.
   afield-no_out = 'X'.
endif.
append

Hi Prabhu,
You are right, problem is with Field Catalog...
When I use FM 'REUSE_ALV_GRID_DISPLAY' it is dumping...
When i tried with FM 'REUSE_ALV_LIST_DISPLAY' it is working perfectly....
how can i use FM 'REUSE_ALV_GRID_DISPLAY' without dumping????
do i need to pass any thing in FM????
Here is the dump:
Runtime Errors         MESSAGE_TYPE_X
       Occurred on     12/21/2006 at 01:03:24
The current application triggered a termination with a short dump.
                                                         What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
                                                     Error analysis
Short text of error message:
Technical information about the message:
Message classe...... "0K "
Number.............. 000
User, transaction...
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLSLVC "
Screen.............. "SAPLSLVC_FULLSCREEN 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSLVC " in "LINE_OUT_NEW_2".
The main program was "ZRCOPCA02 ".
The termination occurred in line 918 of the source code of the (Include)
program "LSLVCF01 "
of the source code of program "LSLVCF01 " (when calling the editor 9180).
                                                         Source code extract
008880         gs_roid-row_id = rs_row-index * -1.
008890       endif.
008900       gs_roid-sub_row_id = rs_row-rowtype+7(10).
008910       gs_poid-row_id = gs_roid-row_id.
008920       gs_poid-sub_row_id = gs_roid-sub_row_id.
008930       gs_poid-rowtype    = rs_row-rowtype.
008940       gs_poid-index      = rs_row-index.
008950       insert gs_poid into table rt_poid.
008960     endif.
008970     append gs_roid to rt_roid.
008980
008990     loop at rt_fieldcat assigning <ls_fieldcat> where tech ne 'X' and
009000                                                       no_out ne 'X'.
009010
009020       if gflg_invisible = 'X'.
009030         if <ls_fieldcat>-do_sum is initial.
009040           clear gflg_invisible.
009050           continue.
009060         else.
009070           clear g_col_counter.
009080           clear gflg_invisible.
009090         endif.
009100       endif.
009110
009120       clear gs_lvc_data.
009130       clear g_style.
009140
009150       assign component
009160              <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
009170       if sy-subrc ne 0.
     >         message x000(0k).
009190       endif.
009200
009210       g_col_counter = g_col_counter + 1.
009220
009230       gs_lvc_data-row_pos = r_row_counter.
009240       gs_lvc_data-col_pos = g_col_counter.
009250       gs_lvc_data-row_id = gs_roid-row_id.
009260       gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009270
009280   *   Endtotal and average
009290       if rs_row-rowtype(1) ca 'T' and <ls_fieldcat>-do_sum = 'C'.
009300   *     save the actual grouplevel information
009310         gs_grouplevels = rs_grouplevels.
009320         clear g_lines.
009330
009340   *     get number of lines of the collect table
009350         describe table rt_data lines g_lines.
009360   *     if there is only one line or the field has no references so
009370   *     that only the first line has to be considered
Thanks,
fractal
null

HP Officejet 8500A Pro Plus changes internet layout when printing

My new 8500A Pro Plus changes the layout when I print from the internet. My option is set to "preserve the layout". For example, when there are three items in a row, it will print two on one row and push the third to another row by itself, even when there should be plenty of room for it to print as laid out, and even if I set the print to landscape. This shows in the print preview, and happens when I print from another computer. How can I get this to print properly?

From the front of the printer: Setup > Network > Restore Network Defualts.
Now, from the same Network menu, run the Wireless Setup Wizard.
If that does not work, tell me about your new router. What brand & model? What kind of encryption (WEP, WPA, etc)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

The environment has changed; the layout can no longer be executed

Hi guys,
I`m getting the below mentioned error message when I attempted to "Enter Plan Data" on my Layout
" The environment has changed; the layout can no longer be executed "
All I did was to create a Variable in Planning Area and then made adjustments to my Data Column in my Planning Function to include the Variable.
Please advice soonest possible

Hi Anurag,
I have a question of Variable.
I created a variable CURRMTH on Characteristic Fiscal Year/Period in my PLANNING AREA.
This variable CURRMTH has the following properties
Text Replacement : Medium text
Replacement Type : Fixed Value
Selection : Fiscal Year/Period is set to 001.2005
Now, I created a Layout
Fiscal Year Period in Data Column and Key Figure in Lead Column.
In my Layout: Data Column tab , I put the following
Heading : CURRMTH
Key Figure : NEWLISTKF
Variable
Fiscal Year/Period: CURRMTH
Do you forsee any inconsistencies here ?
One more question, do I also have to set my Planning Level / Package to have characteristic Fiscal Year/Period to Variable ?
Please help, mate!

How to restrict the user to change ALV layout for Standard Report Output

Dear All,
How can i restict the Users to change Output layout of Standard ALV reports,
kindly suggest to solve the issue.
Regards,
Niranjan.G

Hi NIranjan,
In the ALV function module , the i_save can have the below paramater values.
You can add based on your requirement.
I_SAVE = SPACE Layouts cannot be saved.
I_SAVE = 'U' Only user-defined layouts can be saved.
I_SAVE = 'X' Only global layouts can be saved.
I_SAVE = 'A' Both user-defined and global layouts can be saved.
Check the Authorization Object - S_ALV_LAYO in SUIM (Objects by Complex Search)
Activity -23.
Edited by: Raj on Jul 13, 2010 3:05 PM

Change of Layout/Look and Feel in BI 7 Reports.

Hi,
This is Prem from NetWeaver Portals.
Currently we have a couple of BI 7.0 reports integrated into portal.
We have also used Portal Themes to alter the Look and Feel of the BI reports with respect to Heading colors, alternate row colors etc. But the scope of changing the Look and feel of BI reports from the Portal theme is very limited.
Is there a way to modify it further from BI's CSS?
Where is this functionality provided in SAP BI 7.0?
We are also interested in changing the Layout of the reports in BI. i.e. unlike the standard BI format of reports as generated from the Web Application designer, we would like to change the layout as well.
How is this layout change carried out? Web Templates?
Kindly spell out a solution for me as I'm not aware of BI
Thanks and Regards,
Prem

Could yo please explain little detial. how do you changed the look and feel of reports through the portal themes. We are trying to change the colors of the execptions and text box and some more. we have created a custom theme in which we changed the complex formatted table crictal, bad, good colors. when we assigned this theme through personalization to the user, custom theme colors are not seen in the BW report.
Please let us know
thanks and regards
venkata bandi

'ANALYZE_ACT_FIELDCAT' error coming while changing the layout in FBL1N

Hi Friends,
Through Enhancement we added some piece of code which just adds all lines from the BSEG Table of the given document number. Means FBL1N only displays vendor line items, after adding the above code now it could be able to display all the GL line items also.
The Change is perfectly working in development system. But in Production system when i am changing the layout 'ANALYZE_ACT_FIELDCAT' error is displaying.
Please suggest the Solution.
Thank You in Advance.
Mahender.

Hi Friends,
Through Enhancement we added some piece of code which just adds all lines from the BSEG Table of the given document number. Means FBL1N only displays vendor line items, after adding the above code now it could be able to display all the GL line items also.
The Change is perfectly working in development system. But in Production system when i am changing the layout 'ANALYZE_ACT_FIELDCAT' error is displaying.
Please suggest the Solution.
Thank You in Advance.
Mahender.

How to change the layout of a category view

I don't know how to change the layout of a category. I want to put 3 image's behind each other followed by some text, like a table with 4 columns. Instead of puting then in 4 rows

larsprevo
The category 'view' of items/folders uses the default style of the content area it is defined in (shared categories use the default shared style). Edit the default style to change the font/color of the items/folders returned within the category 'view'. Unfortunately, you don't have the ability to control the layout(like folder regions) - they always display in rows.
Added an enhancement request for a feature that would allow you to control the display of items/folders in a category/perspective: 1828423

How to change the layout of area pages in ESS Overview.

Dear Experts,
Area groups like Leave, directory,payslip are presented on portal in a layout which is fixed in backend ESS customization eg postions(1,2...).
Can I change the layout of these areas in portal?
I tried doing this by going to overview iview and preview and then ctrl+click. I could see containers for each area group but I could not modify their sequence?
Please help!!!

Hi,
May be this guide can help you
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0235c40-6351-2a10-a3a3-eb666dfdb407
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10ddda33-277b-2a10-5294-9913ee5d698f
Regards,
Niraj
Edited by: Niraj Kumar on Feb 18, 2009 10:26 AM

I want to change the layout of my email messages so that the message is at the side of the headers not below them

i want to change the layout of my email messages so that the message is at the side of the headers not below them. i have just downloaded mozilla thunderbird on to my new laptop at i cant get the layout that I prefer back. please help . thanks june

''queenofpersia [[#question-1050056|said]]''
<blockquote>
i want to change the layout of my email messages so that the message is at the side of the headers not below them. i have just downloaded mozilla thunderbird on to my new laptop at i cant get the layout that I prefer back. please help . thanks june
</blockquote>
thank you so much Airmail. I had been told this was the way to do it but couldnt find the menu bar, but now I have. thank you so much for your help, so simple and yet it has made my day! best wishes june

Can't change keyboard layout

I've bought my new Macbook when i traveled to US, though i live in Brazil. I just want my keyboard to have a brazilian layout, with the special characters, and stuff. I've already tried to go to International > Input Menu, and change its configuration, but even though the brazilian flag appears on my right-upper side of the screen, it doesn't change the keyboard layout at all!
I've set my Mac OS X Leo to be fully in English, 'cause i thought it wouldn't be a problem changing the layout. I don't want the whole software in portuguese, 'cause it really doesn't looks good. Some words are forgotten and other weird things happen. And I don't want the US layout keyboard all the time, 'cause i need to write some stuff in portuguese too.
Anyone has any sugestions? Anything to do with the initial setup?
Thanks in advance!

See this article for an explanation and fixes:
http://m10lmac.blogspot.com/2007/02/fixing-brazilian-keyboard-layout.html

Change Keyboard Layout, But Keep Language

I have a MacBook with USA keyboard layout.
While installing, by mistake i selected Latin American keyboard.
Now, i want my language to still be "Spanish/Argentina", but they keyboard layout should be USA.
How can i do that? Note that I don't want to have many input keyboards and then have to switch between latin and english language.

I don't see an option to change "keyboard layout" only.
Do you really not see the Tab called Input Menu under system preferences/international? There are boxes to check for keyboard layouts, and one is called US.
Another Tab is called Language, and there you can put Spanish (actually Español) at the top to keep your OS in Spanish.
Another Tab, in the middle, is called Formats.
PS If you want to type Spanish with the US layout, you can use the Option/Alt key shortcuts. A list can be found here:
http://homepage.mac.com/thgewecke/diacritics.html

Change the layout in a file of pages

Can I many times over change the layout in a file of pages? With the old version (pages09) it was possible....

Hi elirusconi,
elirusconi wrote:
Can I many times over change the layout in a file of pages? With the old version (pages09) it was possible....
I don't know what layout you mean was possible to change in Pages '09. Please explain.
More information will lead to a solution .
Looking forward to your reply.
Regards,
Ian.

Change the layout of a query items in BEx analyzer

Hi,
I had developed a query, so when it is viewed in BEx analyzer the items(Char and Keyfigures) that i had used in rows and columns are displayed in analyzer.
Apart from this in report i can see the items i had used,
in top corner.
So i need to change the layout of these items in top corner ie. 1. all charac
2. all keyfigures
or combination of both in priority wise, is it possible.
Pl post.

Hi,
You can delete them from Query output and Save it as workBook.Then Open the workbook.You will not see them again whenever you open your workbook.
Right click on result area of output>properties>interaction tab-->enable 'Refresh Query when opening workbook' and save the work book so that whenever workbook is opened,you will get selection screen.
Pl dont forget to reward points if it helps.

Changing the layout of grub

Does anyone know if there is a way to change the layout of the Grub menu? For example: removing the help text below the selection menu. I've just been looking all over the internet and can't find anything relevant.

probably not - it all looks hardcoded - can you give me the exact text, as there's alot of source to look through?

Changing the layout of the af:panelCollection

HI,
Is there a way to change the layout of the af:panelCollection so that the buttons added on the toolbar facet show before the view menu. Can i use adf skinning tools for it?

Hi,
as far as I remember there is no option for this
Frank

Change in layout

Similar Messages

Maybe you are looking for