Change in source system client number - how will it affect BI?

Hello,
I have the following landscape:
R/3 DEV (client 100) connected as a source system to BI DEV
R/3 QA (client 100) connected as a source system to BI QA.
R/3 PROD (client 100) connected as a source system to BI PROD.
there is some problem with the R/3 QA server and we want to change it and have a different client (200) for it. As far as the developments in R/3 (datasource enhancement, activation, etc) go, they will not be affected by this change. I'm worried about how this will affect BI.
Transports: currently we have client 100 as the target for transports to BI QA. If i change it to 200, would i have to re transport all the development? I think i would since even if i replicate the datasources from the new client, i will not get the dataflow. for that i'll have to transport everything again. If i'm right, is there a work around for this?
Data Models: I have not put anything in BI PROD as yet. the old transports contain the metadata for cubes, ODS, etc along with the data flow. I dont think i can move them into production since i will get two transports with the same target. won't it create some problems? how do i do this? Do i need to collect my cubes, ODS, etc again?
I appreciate all the help.
Thanks
Sameer

Thanks Koundindya.
I did all the steps as shown in the thread. I've a small problem.
The data flow (3.x and 7.0) for the cube is correct. It shows the new client for the datasources.
For DSO's and master data infoobjects with 7.0 data flow and datasources, The DTP shows the old datasource and the system displays the message: source system XXXXX does not exist. In the data flow for the transformations, it shows the correct data flow and the correct data source.
Is there any note that i need to look or is this a bug in 7.0?
Regards,
Sameer

Similar Messages

  • How to change the Source system from ONE DataSource?

    Hi,
    I'm trying to change a DataSource's source system (active with dtp and transfer rules), but it's not possible to  do it in change mode because the field 'Source Sytem' is not enabled. I know I can use the BDLS transaction but I understand that this is for change all Datasources and I only want to change one of all.
    Thanks for your help

    Hi Marcel,
    As I understand apart from file and web services all other data sources are replicated from underlying source system. BDLS transaction is used to change the source system but in case of system copy activity and it is necessary because the data sources points to old source system.
    In your case as I understand you will have to replicate the current data source directly from underlying source system and then build the rest of the flow. May I know how you have got this single data source for which the source system is different?
    Regards,
    Durgesh.

  • Best Way to Change Source System Client

    We initially had a ECC source client for BI as 35.  But over time, we suffered with good test data because the ECC team use client 15 and not 35.  We want to change BI 7 to use client 15.  I have created a new source system in RSA1 for Client 15 but when I try to delete client 35 and /or change the source client on a datasource, all the data mappings are deleted!
    I would really appreciate any advice or information on the best way to change the source R3 client for Bi without losing data mappings.  Point awarded and much respect
    Warm regards
    Lee Lewis

    Hi,
    Yes. There is a way to change the source system without deleting the old system. Please use the T.code BDLS and for more information refer the below link
    Re: Changing a Source System.
    OSS note 886102 will also give more information about this.
    Hope it helps.
    Thanks.

  • How to change the source system for just a datasource

    Hi,
    Our test/development BI system ( BI 7.0 Unicode ) is connected to our development system and to our test system, 1 BI system connected to 2 R/3 systems.
    During some time, the test system won't be available so all datasources that point to the test system must be connected to the development system. In RSA1 is not possible to change the source system in a datasource: RSDS 057
    'Creation of DataSources for SAP source system D30CLNT007 is not permitted' , same error trying to copy the datasource,.
    Any idea about how to proceed ?
    Regards,
    Joan

    Hi,
    If I try to repliclate metadata in the datasource, message RSAR 051 appears: 'error when opening an RFC connection'. This error is expected because the logical system pointed in the datasource does not exist.
    Is not possible to change the source system in datasource ( in RSA1 ) because the field is always greyed, also if I try to copy the datasource the message RSDS 057 appears.
    Any idea about how to proceed ?
    Regards,
    Joan

  • How to change a source system

    Hello,
    we have just copied our BW productive system on the consolidation system. With this copy on the consolidation system now exist the source system to our productive R/3 system.
    I would like to connect the bw consolidation systen with the R/3 consolidation system.
    Does anybody now a possibility to switch the existing source system "R/3 productive" to "R/3 consolidation".
    All source system related objects (infopackages and so on) should be switched to the new source system too.
    Thanks
    Frank

    Hi,
    Roberto's answer is correct but it is making the assumption that all the DataSources in R/3 production are the same in R/3 QA.
    Once you have done the BDLS in BW for the source system technical name, you will have to do a source system check and restore. This will check the idoc and low level communication settings.
    As Roberto states, SAP note 325525 is the best source of information.
    Finally, you will have to deal with the data differences. Your data in R/3 QA will not be the same in R/3 PRD. This is a manual process.
    Cheers,
    Mike.

  • Changing the source system in QA

    Hello All,
    I just wanted a quick opinion from your experience on the following issue:
    We  have a ECC Dev client 20 connected to BI Dev client 20
    Similarly we have ECC QA 120 connected to BI QA 120
    But due to some reason we now want to connect a new ECC QA client 150 to BI QA 120 and take out ECC QA 120 totally(120 is wiped off).
    I already have a lot of development transported to BI QA where the source system is ECC 120. Now if 120 dies and we pull the data from 150, what are the pitfalls to watch for?
    Like all my Master data objects , DSO and Cubes still point to ECC QA client 120 but now the "actual" source system is going to be ECC QA 150.
    Points,
    Gaurav

    You need to replicate all the data sources in BI from QA 150 and change the source system assignment to 150 instead of 120.
    Also, you need to reinitilase delta for delta enabled extractors.
    Two  things to watch out:
    1.  If you dont have source system identifier,  then if you happen to get records with same key, then it will overwrite. This applies to both master and transaction data.
    2. For transaction data that is not delta enables, there may be a possibiltiy with which the records will get duplicated. So, better to delete the old requests before reload the data from QA150.
    Ravi Thothadri

  • Change of Source system in Data Source

    Hi all,
    Our development system is a copy of another BI system. now the development system is connected to different source system. since it is a copy, all data sources are pointing to previous source system.
    How can I change this data source point to new source system.
    With regards,
    Bala

    Hi Bala,
    As u know the DATASOURCE is SOURCE dependent.so the solution when you connect your developement system with another system ,while transporting the datasource you have to change your source system name also according to your BW boxes
    I will give an ex:
    suppose u have 3 system in your BI architecture,
      BW  :    Regression    ---> PREPROD -
    > PROD
    SOURCE  :            S1         --->        S2        -
    > S3
    SO When we transport the BW datasource.....,while transport we have to change the source system accordingly.
    I hope i helped answering your question
    Edited by: SIDHARTHA SATAPATHY on Oct 21, 2011 8:43 PM

  • Change of Source System in OBIA 7.9.6.4

    hi All
    Our Client has decided to change the source system from EBS R11 to EBS R12.So they have completed EBS migration to R12.I have been asigned a job to
    configure the existing bi apps for the source EBS R12 which previosly was using EBS R11. Can any one help me to configure the OBI Apps Financial module.
    Our OBIEE version is 11.1.1.6.9
    OBIA version is 7.9.6.4
    Any help will be appreciated as the Oracle's online doc is also not helping me.
    Thanks & Regards
    Bivin

    Hi Bivin & Srini,
    I am working on this and keep post my updates.please do from your end too.
    Thanks &Regards,
    Raj

  • Change of source system - any mass transaction?

    Hi,
    we have to transfer some programs and stuff from one system to another. Basis people will manually import a transport for this. In target system, I want to change the source system of  the transported objects. Because it is quite a big number, I am looking for a standard reoprt/transaction to accomplish that.
    Any hints?
    TIA,
    Regards,
    Clemens

    Hi
    I believe yuo can create a program to update the table TRDIR, something like this:
    TABLES: TADIR.                         " Catalogo oggetti R/3 Repository
    DATA: COUNT TYPE I.
    PARAMETERS: P_SYST1 LIKE TADIR-SRCSYSTEM, " Source Sys
                P_CLASS LIKE TADIR-DEVCLASS ,
                P_SYST2 LIKE TADIR-SRCSYSTEM. " Target Sys.
    SELECT * FROM TADIR WHERE SRCSYSTEM = P_SYST1
                          AND DEVCLASS  = P_CLASS.
      TADIR-SRCSYSTEM = P_SYST2.
      MODIFY TADIR.
      IF SY-SUBRC = 0.
        COUNT = COUNT + 1.
      ENDIF.
    ENDSELECT.
    IF SY-SUBRC = 0.
       WRITE: Count, 'Objects from', P_SYST1, 'to', P_SYST2.
    ENDIF.
    U can try to use the trx SE03:
    - Run the node: Change Objects Directoty entries
    Here you can change the dev class and source system too, but I don't believe it can change all objects in mass way.
    Max

  • Change of source system

    Hi all,
    At present we have in our data source the quality source system of (R/3) mapped to the data source in the development of BI. Now i want to change the source system for the data sources in BI to R/3 Qualtiy.
    This mapping is not done for all the application - it is done only for some of the applications like FI etc, and all other applications like the PP,QM etc have the respective R/3 clients mapped to the Data sources.
    Can you kindly tell me the steps that has to be adopted to do this activity.
    Regards,
    M.M

    - In R/3 QA , SE37, run function module RSAP_BIW_DISCONNECT to disconnect you R3 QA connection with BI Dev. ( you can find Log sys names of this connection in RSBASIDOC table in R/3 QA)
    - BDLS has to be run in BI for changing R/3 QA to R/3 dev. Also ensure the changes have been done to SM59 destinations like ip/host, login/password, RFC dest descriptions etc. in both BI dev and R/3 dev.
    - Then RESTORE R/3 dev Source System in BI dev - RSA1 (While performing RESTORE , R3 dev client needs to be opened. After Restore you can close that)
    - Then you will have Replicate all datasources from Context menu of Source sys R/3 dev in RSA1.
    - Then Run program (SE38) - "RS_TRANSTRU_ACTIVATE_ALL"  in BI Dev to activate all transfer structures for R/3 dev source sys
    Hope abovementioned steps help you.
    Rgds,
    Vikram.

  • Change the source system

    Hello
    In our Quality Box , I need to change the source system connection (from QR1 to QR2). I created the new connection successfully. Now the issue is all the Transfer structure still using OLD connection ( i.e QR1) . I run BDLS and it did not word. How can I re-assign the new source system (QR1)  to all of my Transfer structures in one go. Is there any report ?
    Farooq

    Hello,
    You cant directly convert the existing objects for a source system to the new source system.
    For that you need to do a transport of the objects to the QA box while maintaining the entry in BDLS to convert to the new source system.
    Regards,
    Shashank

  • Reg Change of Source system in BI Producton

    Dear All,
    We had a R/3  source system 900 and data was getting loaded from this client  to BI 600 client everyday.
    Scenario:-
    Nowin R/3 the client system is changed from 900 to 950 and 900 client is no longer available.
    Problem:-
    What are the steps we need to take care of in BI system since the source system (client) has changed
    Kindly give your inputs for the same.
    Thanks & Regards,
    Khan

    Hi Khan,
    Please follow the below steps:
    The requirement is that Clients 900 connection should no longer exists in BW and replaced by clients 950
    Below steps would hold good if the datasources of  CLNT950 & CLNT900 are identical.
    1) Delete CLNT950 in BW (no Datasources of this system is used in BW)
    2) run BDLS in BW change CLNT900 to CLNT950
    3) Run RSAP_BIW_DISCONNECT in 950 clients ..
    4) Restore connection CLNT950
    Please remember to make a transport of source system dependent objects(for the original connection) on BW side, else you lose all the transfer rules and stuff. It has to be reimported later after mapping the old and new source system connections in table RSLOGSYSMAP.
    Hope it helps,
    Thanks,
    Amit Kr.

  • If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

    If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

    Your users can utilize Outlook no matter where your email is hosted at.
    how will it be different for them
    different from what?

  • Change to source system not possible

    Our source system has a RFC problem conection, and when I try to change the parameters I have this meessage
    Change to source system not possible
    Message no. RSAR743
    Diagnosis
    The change to RFC parameters is not possible for source systems with manual meta data adjustment and data transfer from files.
    Any idea?
    thank you

    Hi
    It looks like, you don't have proper authorisations to change the source system..Please check with authrisations...
    Thanks,
    Teja

  • I have my @gmail account for iTunes purchases, and my @me account for contacts/calendar, how do I approach iCloud and how will this affect me?

    I know accounts cannot be merged. The @gmail account has existed for years before the @me account.
    I haven't been able to set up my phone yet because I have absolutely no idea how this will affect me, when it was quite clear before.
    How will this affect me in the future? What about when my @me service expires (I had just under a free year left)? What email should I link? What should I be worried about if kept separate or the same as they are now?
    I still don't even understand what exactly iCloud does yet. If I set up my phone with whatever my iCloud account is, is it locked in? Since no credit card info or applications or purchases are associated with it, it will be of no use in that area.
    I am absolutely confused on what I should do, and after spending 4 hours attempting to update my phone, am still stuck on having a useable device.

    This point I don't quite understand. It is clear that:
       1) your additional 20gb are available only up to next summer
        2) the migrated account will be downgraded to a free account then.
        3) the purchased music and apps do NOT count in the 5 gb.
    So, I don't know what you need the 20 gb in the "unused AppStore account" for. Your documents and emails are all on the 25 gb account.
    I think, you can log into your non-me.com AppleID and change your e-mail address there without loosing what you purchased. So, I wonder what would happen if I put the me.com address there...
    Not sure, I would try...
    Regarding the me.com AppleID, you should make sure you have a secondary email account added there, otherwise it might be difficult to recover that account in case you cannot read the me.com email anymore. Interestingly, when I tried to put my non-me.com address there, it complained about that email already used by a different account. So, I guess if you try to put your gmail account there it will complain. So, you probably need a third independant email account....

Maybe you are looking for