Change inbound IDoc 860 overlay the old text with new text

Currently whenever change inbound IDoc 860 gets posted new text gets appended. My requirement is: old text needs to be overwritten with new text. Can you please advice
Thanks

Hi Hock,
thanks for your answer. Unfortunately i think your are right.
Yesterday i got an answer from debopriyo mallick, does anyone know,
why this answer is dissapear?
Regards, Dieter

Similar Messages

Replacing the old value with new value on the website

Hi ,
I have two input fields CLIN # and PR#.When i enter the text,for the first it is working fine,second time when i enter it is replacing the value which i enter with the first one.I should not replace the old value.
ex:
Example when i enter test5 for the first time
CLIN # :Test 5
Next when i enter Test6 ,this value replaces the first one
CLIN#: Test6
CLIN#:Test6(there is no test5)
I am doing for my istore application.Any ideas

As the user that created the anonymous block ruun:
select count(*) from general_acct_mast_table;
and
select tbaadm.count(*) from general_acct_mast_table;I strongly suspect that they are actually two different tables, and the tbaadm version is substantially larger that the non-qualified one.
In any case I would not be doing this as a row-by-row procedure. I would create two lookup tables like:
create table masked_general as
select acid, foracid, round(dbms_random.value(81000000,85000000)) masked
from (select distinct acid, foracid
      from general_acct_mast_table
      where acct_ownership not in ('O'));
create table masked_stmnt as
select * from masked_general;
alter table masked_general add constraint masked_general_pk
   primary key (acid);
alter table masked_stmnt add constraint masked_stmnt_pk
   primary key (foracid);Then do the updates as:
update (select g.foracid, g.acid, gm.masked
        from general_acct_mast_table g
           join masked_general gm
              on g.acid = gm.acid)
set foracid = masked;
update (select s.foracid, sm.masked
        from mini_stmnt_details_table s
           join masked_stmnt sm
              on s.foracid = sm.acid)
set foracid = masked;Note that this assumes that both acid and foracid are individually unique in general_acct_mast_table, which seems to be implied by your procedure, and that you want to be able to roll the whole thing back if there are problems (that is, you do not want to commit between the update of general_acct_mast_table and mini_stmnt_details_table).
I would also probably a a verification step after creating the first masked table to ensire that you did get unique vluaes back fo the masked column.
John

TS3999 In the last week when changing text notes in outlook appointments or all day events, the changes appear on my pc screen, iphone & ipad but when I print the changes are not there, the old text prints that has been deleted

In the last week when changing test notes in Outlook appointments or all day events, the changes appear on my PC, Iphone & Ipad, but when I print my calendar they do not print. I get the old text or deleted text from the printer copy of my calendar. What is going on?

Thanks Sig. The information is here: Anything useful stand out?
Battery Information:
Model Information:
Serial Number:    9G1130CJVD3MA
Manufacturer:    DP
Device Name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    0002
Cell Revision:    0158
Charge Information:
Charge Remaining (mAh):    5663
Fully Charged:    Yes
Charging:    No
Full Charge Capacity (mAh):    5663
Health Information:
Cycle Count:    59
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    261
Voltage (mV):    12574
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Wake on LAN:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    Yes
ID:    0x0100
Wattage (W):    60
Revision:    0x0000
Family:    0x00ba
Serial Number:    0x00262704
Charging:    No

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

Good day BenithaK,
Once you have changed your Apple ID, you need to set it up for use in the various systems such as iTunes, the App Store, etc so it can be used as intended. This article shows how to do that -
Apple ID: What to do after you change your Apple ID - Apple Support
To change your iTunes billing information for either Apple ID account, follow the directions in this article -
iTunes 12 for Mac: Manage your iTunes Store account
Thanks for using Apple Support Communities.
Safe computing,
Brett L

HT5621 I recently changed my apple ID but the old on is still on my iCloud account. The old address is dimmed on iCloud on my iPad so I can't change it. How do I change to the new address? I don't want to delete the account as I don't want to lose the pi

I recently changed my apple ID but the old on is still on my iCloud account. The old address is dimmed on iCloud on my iPad so I can't change it. How do I change to the new address? I don't want to delete the account as I don't want to lose the pictures

To change it, you have delete the existing account. However you can avoid losing any pictures in the process. To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account. To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll. (Camera roll photos are not effected by deleting the account.)
Then go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.

I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?

I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?

Have you signed out of your iTunes account on the device/computer that you are using and signed back in with the updated password ? That should 'refresh' the account on it, and you should be able to use the account's new password to download updates to its apps

How to change the Existing alias with new alias name...MAXL SCRIPT

HI Experts
I need to change alias name of the existing member with new alias name.
please send me maxl code to change the alias name .
My thought is
1) Old alias should be replaced with new alias name .
2)There is one account that should be rolled out to another parent..these parents are already exsist
3) I need a MAXL Script to change the new alias name .
please suggest ASAP.
Thanks
USER

John
I heard that we can replace existing alias name with new alias thru MAXL
i.e replace alias name XXXX member with YYYY ;
please correct me if iam wrong ,might be Maxl command is wrong but this is the idea.
Thanks
USER

HT1918 I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me

Please I need help regarding this problem I faced today.
I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me?

Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
Errors related to downgrading iOS
The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

Just sent in daughter's Ipod touch 5th generation to be fixed....They sent me a new one....is there anyway to get the contents of her old one onto the new one? I synced the old one with Itunes before I sent it in and backed it up on my computer.

Just sent in my daughter's Ipod touch 5th generation to be fixed.....They sent me a new one. Is there any way to get the contents of her old one onto the new one? I synced the old one with Itunes before I sent it in and backed it up on my computer.

Sure, as soon as you open iTunes with the new iPod connected, it will have a "Welcome to your New iPod" screen. Just choose Restore from backup.

Can not access a website but everyone else is doing well and the old computer with the same internet coming in on that side.

Can not access a website but everyone else is doing well and the old computer with the same internet coming in on that side. side is www.miun.se

You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

I just installed the new CC apps. Since they get installed parallel to the old ones instead of upgrading, do I un-install the old ones with the un-install app in the old folder?

I just installed the new CC apps. Since they get installed parallel to the old ones instead of upgrading, do I un-install the old ones with the un-install app in the old folder?

Easyebe,
Are you using a Mac machine or Windows PC?
If using a Mac machine, go to Application-->Utilities-->Adobe Installer-->old apps names and run the uninstaller for old apps.
If you are using Windows PC, go to Control panel-->>Program and Features and uninstall the old apps.
It will uninstall everything related to old apps, but your setting must be imporated to new version of apps.
Regards
Srishti A
Adobe Support

AP keep flapping between the old controller and new controller

I am migrating the AP from the old controller to new controller. One AP connected to new controller and download the code then rebooted and re-connnected to old controller and download the code. After that it joined the new controller and download the code...It keep doing this.
What is the issue and how to solve it....
Thanks

Hi Raymond,
We also need to figure out why the AP leave the new WLC.
Fixing this IMO will be a permanent solution.
1) Execute "debug capwap errors enable" , "debug capwap events enable" and debug pm pki enable" on the NEW WLC. Get the output at the time the AP goes out of the new WLC.
2) "show logging" from the AP.
3) And "show ap join stats detailed " and "show ap config general " from the WLC.
Regards
Victor V
*****Help out other by using the rating system and marking answered questions as *****Answered"*****

I would like to know if is possible to use the old iSight with my powerbook (mid 2009)?

I would like to know if is possible to use the old iSight with the macbook pro (mid 2009)?

Hi,
If the Mac has Firewire then you can use the External iSight
(Other readers
If you have Firewire 800 then you will need an adapter to use the Firewire 400 camera - Search for the word Adpater and see posts by EZ Jim for more details)
Don't daisy-chain the camera with Hard Drives
The camera only uses a data rate of 200Mbps and the differences in Hard Drive data speeds can be an issue.
The External iSIght should work no matter what Firmware is on there currently.
There is some evidence that having the 1.0.3 version (Open the System Profiler > Hardware > Firewire) on the device makes it more compatible/useable in later OS versions
The Updater is included in Tiger and Leopard.
Hard Drive/System/Library/CoreServices/iSight Updater/iSight Updater.app
An OS Update could "trigger" this to be run if you have Tiger
It can also be run as a Standalone.
It is Not present in Snow Leopard and although the documentation says this Firmware is an Audio update some people report that the camera needs the 1.0.3 Firmware to run.
(that could simply be the "Flashing" the Memory involved resets it enough to work)
10:22 PM Wednesday; June 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have an old nano and a new computer. Can I sync the old nano with the new computer without loosing all the music on the nano?

I have an old nano and a new computer. Can I sync the old nano with the new computer without loosing all the music on the nano?

with the nano connected to the computer, go to itunes and file-transfer purchases.

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

That shows you that iPhoto is working correctly and whatever issue you are having is based in your original library.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Change inbound IDoc 860 overlay the old text with new text

Similar Messages

Maybe you are looking for