Change info-category

Dear guru ,
i have created many info record with info category standard.
Can I have a tool to change the info-category standard in the
Info-category subcontracting ?
Thanks in advance

hi
u can change using me12 t code
no problem
kishore

Similar Messages

Change item category in PO in ME22N

Dear all,
I want to change the item category in the PO from standard to subcontracting in ME22N transaction.But, the item category field is in disabled mode in ME22N.I checked in the DEMO client and there i am able to change the item category.
Please let me know what has to be done for this .
Thanks,
Ravi

>
kumar s wrote:
> Dear all,
>
> I want to change the item category in the PO from standard to subcontracting in ME22N transaction.But, the item category field is in disabled mode in ME22N.I checked in the DEMO client and there i am able to change the item category.
>
> Please let me know what has to be done for this .
>
> Thanks,
> Ravi
Adding to others reply,Have you created inforecord for parent material in info category - subcontracting.?

Urgent - How to change Item category for Open Purchase Order

Hi Team,
Lil bit tricky issue.
My client has asked us to change the existing Item Category values, Combinations, Category Set etc. Its been changed and uploaded successfully.
The question here is how we need to handle the category for Open Purchase Order. How to update the same.
Do we need to do manually or any other way ?
Please advice
Regarads,
John

Hi John,
This is reallly a tricky issue!
I guess you cannot change the category of an existing PO's.
This field will be greyed out once we save the form...there were no profiles/other setups to enable this field.
For all new PO's since you have changed the new category value that should not be a issue.
Lets wait for some of our colleuges opinion.
I guess PO cancel should be the final option if we dont hear any new work arounds.
Thanks
-Arif.

Can no longer change info in itunes

I just got a new imac and successfully moved the music over from my old mac. I see, however, that I cannot change any info anymore. I highlight a song, do a 'get info', click info tab, and all fields are inaccessible. I am unsure of whether this has been so since I started the new mac or not (only 2 days).
There was a previous mention of this problem in this forum which I found using Search, but it was unanswered.

I replied a few minutes ago that I had read/write permissions over my itunes music folder. But further snooping around showed me that I could indeed change info over most songs, just not the specific ones I got hung up on yesterday. The culprit was that the offending songs were all in a folder called "unknown" or "unknown artist". both those folders allow only Read rights.
Now I just have to figure out why that is and how to change it. Thanks, Colin, for pointing me in the right direction.

Change item category in delivery order

Hi everyone
Issue: Can not change item category in delivery order.
Phenomenon:
1:Create purchase order and receive item based on it. complete invoice verification.
2:Use MIGO to create return delivery based on material document that is created during above process.
3:Based on system settings, (Sales org, ship-to party etc), outbound delivery is automatically created in background.
4:Try to change item category which is already determined during delivery order creation, but it is grayed out.
Can we change item category in this situation?
I have checked thread "Number of attempts to change Item Category
This looks same issue but I still do not know how to control item category in delivery order.
In material type, is there any place I can configure to allow user to change item category
in delivery order?
Please advise.
Satoru

Hi,
Check whether this link would help you,
[Change item category in delivery|Change item category in delivery]
It looks you need to use user exit: MV50AFZ1 to acheive your requirement.
Regards,

Unable to Change Item Category in Sales order

Hi all,
I am creating sales order with reference to sales contract but at the time of sales order we don't have en off stock to deliver to customer , so we have deiced to Third party sales process
But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
Can any one guide me how sales order line item should be in active mode so i can change the Item category as a TAS third party item category
Help me regards this
Thanks
Rajesh

hi,
You can the item category field (VBAP-PSTYV) editable , if item is configurable (item category TAC), then change item category to TAS.
by using include MV45AFZZ - FORM USEREXIT_FIELD_MODIFICATION.
when screen 4001 or 4003.
   IF VBAP-PSTYV = 'TAC'.
           SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.

Change Item Category in Sales Order for KMAT materials

Hi,
How can I change item category in sales order/quote for KMAT materials?
Currently in the sales order/quote, the item category field is grayed out for KMAT/configurable materials and I can change the item category.
Please help me.
Sincerely.
Ketan

Dear Ketan,
I hav exactly the same problem.
Did you finally succeed?
Thanks.
Ben.

Change item category Display mode in sales order (Third Party )

Hi all,
I am creating sales order with reference to sales contract but at the time of sales order we don't have enoff stock to deliver to customer , so we have deiced to Third party sales process
But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
Can any one guide me how sales order line item should be in active mode so i can change the Item category as a TAS third party item category
Help me regards this
Thanks
Rajesh

Hi all.
Thanks for response
I maintain all configuration, But the problem is while creating Sales Order with reference to Contract
the Sales Order line item in grad Mode i am unable to change item category as TAS
i mean TAN is on Display Mode
and we are using Varient config for that material
Please guide me where i need to Configure so system should allow me change item category in sales order please guide me
Thanks
Rajesh
Edited by: RAJESH KUMAR on Jun 16, 2009 10:23 PM

HFM Report export to Excel changes cell category

Greetings,
we just updgrated to version 11.1.2.2 and are noticing some strange behavior coming out of an some HFM reports we are exporting to Excel.
We are trying to sum up some values and are getting #VALUE!. We have to manually change the category settings of all columns in order to enable any Excel formulas. This occurs when values are "-".
We can manually change Excel to reflect the cells to be numbers but there are a lot of reports to change, and on top of this, the prior version of HFM/Reports did not display that issue.
Pls let me know how to resolve this issue.. Many thanks.

Issue is not with HFM, but with FR Studio and version 11.1.2.2.302. Patch is available.
Patch # 16088101 -- FR 11.1.2.2.303

Change item category of a GL account

Hi All,
We need to change the item category of a G/L account from 04000-cash account to 01000-Balance sheet account. While configuring this, I got a warning message which indicates that problems
may occur in the target system after the transport.
Please advice me whether I can go ahead and change the category of the GL account. Will it have any other impacts after transporting to the production?
Thanks in Advance.................
Arun

Just make sure all the relevant dependent objects are in the transport request. This error normally comes when there are few elements not maintained in the transport request or in a different transport request.
You can try releasing the request if you are confident and if there will be some error try to identify the problem.

I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

Is it possible to change the CATEGORY TITLE font color and/or size of each tile group in start screen, when the tiles are sorted by CATEGORY?

TIA.

Q. Is it possible to change the CATEGORY TITLE font color and/or size of each tile group in start screen, when the tiles are sorted by CATEGORY?
A. No
Carey Frisch

Change a category name in numbers

I am trying to set up the personel budget and want to change or add category names. I cannot do this, would anyone know how? Some of the names there are of no use to me and do not fit my needs, thanks

I don't know why you would not be able to change or add a category name. I assume you are talking about the list in the budget table and the accompanying chart.
To change a category name, double click on the cell, type something else, hit Return.
To add a category name and keep the table in alphabetical order, the easy way would be to
Click on the little disclosure triangle next to the row number of the row above where you want to add your new category (see the screenshot below, the triangle next to the "7").
Select "add row below"
Select everything on the row. Copy, Paste to the new row. This will copy the formulas to the new row
Overwrite the category with whatever you want it to be and type in a budget for it.
The chart will automatically pick up the new category
You/we/all of us will get out of beta when Apple releases a non-beta version.

Vendor error message in sourcing cockpit when change product category

Hi there
We are having a problem when changing the product category in the sourcing cockpit.
The product category is linked to a vendor list. When you change the product category in the sourcing cockpit and choose a vendor by doing a vendor search and then click create purchase order, it still gives the error message "please choose vendor". Somehow it is not reading the vendor.
Is there any way to solve this with a note or something?
Kind regards
Deepa

Hi
when you display the cart in work area , the vendor would have picked .i think you can see in one of the basic data .
dont you try to prosose a source of supply and assign sos.
i am not sure where mistake has happened ?
can your business allows you to complete the cart and create a new cart since all our data is different
once you change the product category. for eg. it linked with purchasing group upon responsibility of product group and this purchasing group linked with purchase organisation internally and vendor....so..on .
one small change product category impact data more..
it is not recommend to change the product category here. product category may link with responsible purchase group and purchase group is linked with purchasers w.r.t purchase group .
regards
muthu

Need to Change Podcast Category!

I have a podcast that is feed via Blog Talk Radio. I need to change the category from investing to business in itunes for the podcast. How can I do this? I can't find a way to change it from investing since it is NOT a investment podcast. HELP!

Tha'ts the only method. The Store may take a few days to pick up changes. It's not really possible to comment further unless you would like to publish the URLs of both your feed and the Store page - this latter can be found by control-clicking on the podcast image (or where it should be) - and choosing 'Copy link'. Please include the http:// in both cases to make the links clickable.

Change info-category

Similar Messages

Maybe you are looking for