Change infotypes end date when delete leaving action for employee

Hello,
I created new infotype and when employee leaves its end date is changed for leaving date.
When leaving action is deleted ther is some least of infotypes that user can sign so the end date of selected infotypes will be changed to 31.12.9999. How can i add my infotipe to this list?
Thank you,
Paulina

Hi,
Maintain IT 0041 where in that table maintain employee start date of hiring and leaving date of employee bze in IT 0000 the dates will change as per action lets say if employee hire that date will be in IT 0000 action and if employee gets promotion date or leaving date that will store in IT 0000 by delimiting other actions
So maintain IT 0041 where you can pull dates from there if you maintain
End date will always be 31.12.9999 so check action start date you will get in sequence
Thanks
Edited by: Vibinsap on Mar 9, 2012 7:12 AM

Similar Messages

How to control the default infotype start date when executing an action?

Dear all,
I have a custom Infotype, which start date should always before the hiring date and so we want to leave the start date blank which creating the relative Infotype.
I have already done the configuration in V_T582A such that the start date provides no default value when creating the new Infotype in PA30. However, the hiring date is still being defaulted when the Infotype when being created in an hiring action. Before I go to user exit programming, is there any place I can do relative configuration?
Thanks,
Steven

Hi Chris,
In our personnel action, IT0022 Education is included, and I've noticed that the system can provide no default start date even it is created through PA40. I have checked the dynamic action configuration that IT0022 is not included in the standard list, so I guess there may be a place to do such configuration.
Steven

Exchange Outlook 2013 freezes when deleting shared calendar for employees who have been removed

Hi,
I am removing users' shared calendars from my outlook 2013 in exchange environment. The problem is, that the shared calendars belong to users who have left the company and have been removed from the domain, this is causing outlook to freeze because i think
it's trying to find the entry then delete it, rather than delete it.
There is no problem deleting a shared calendar for an user who still is in the domain. This seems to be strictly affecting users who have left the domain.

Hi,
Generally, if the shared calendar owner is removed from the Exchange environment, the shared calendar which was added before should be removed from Outlook client normally.
Please use Outlook with Exchange cached mode, and make sure the shared calendar was not added in Advanced tab in Account Settings. Please start Outlook in safe mode and remove the shared calendar to have a try.
If the issue doesn’t happen in safe mode, please disable the third-party add-ins one by one to find out the cause.
Regards,
Winnie Liang
TechNet Community Support

Short dump while changing the end date of infotype 0167 through PA30

Hi all,
I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
dump descript is as below
An exception occurred that was not caught.
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_HRPA_VIOLATED_POSTCOND
Date and Time          11.03.2010 07:06:26
What happened?
    The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
     caught anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
    terminated.
thanks
shahid

Search OSS Notes for that.

Performance Management: Changing plan end date after publishing plan.

Dear experts,
I want to change my plan end date after publishing the plan. But there is no update option when i go to HR professional > Performance Management > Performance Management Plans > Query A plan > Update.
Kindly guide me.

Change the End Date of Plan and Rebublish the Plan.
Thanks

Urgent-change the end date for a existing wage type.

Hi,
Can u pls let us know how to change the end date for a existing wage type.
The current end date is 30.8.2008 and we would like to change to 31.12.9999.
Rgds,

Use This report RPCLGV00
The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator A when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employees organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
The wage type distribution offers you the following options for evaluation:
Individual reporting for a specific personnel number or name.
Totals evaluation without specifying a personnel number or name.
You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
Scope of Function
You use the following parameters to determine how the appearance of the wage type statement:
Wage type for evaluation
Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
Evaluation start date
Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
Evaluation end date
This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

CRM-ISU: Need to change the END date and Start Date for contract items

Hi,
There is an old contract item for which I need to change the end date
and there is a new contract item for which I need to change the start date.
I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
but how to change the start date of a new contract item?
Please let me know if any body is aware of this?
Thanks

Hi,
Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
Regards,
Surjith

FM to get start and end date when given month

Hi all,
can anybody help me if there a FM to get start and end date when given month like 01 for jan.
Thanks in advance
Sahitya

Hi,
Check this Function Module
HR_JP_MONTH_BEGIN_END_DATE
here if you r giving the month u wil get the start date and the end date.
Hope this helps you.
Thanks & regards,
Y.R.Prem Kumar

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!

How to create backup file on itunes for ipod touch 4g game apps data? Is there a way to do it? I want to try an app on my friend's computer, but you can't add apps on another computer without having your own ipod's data being deleted. Thx for any help!
I want to know how to create a backup file (because I'm pretty new with itunes, and it's hard to use it for me still), how to store my app data/media/videos, etc. And how I can retrieve them back when I'm done with the app I tried on my friend's computer.
If anyone can help, it'd be great! Thank you so much!

Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff.

Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

Need to change CONTRACT End date using Bapi BAPI_CUSTOMERCONTRACT_CHANGE

Hi,
I need to change date of a contract and for the same I am using Bapi "BAPI_CUSTOMERCONTRACT_CHANGE".
I am passing the following Parameters to the BAPI.
SALESDOCUMENT -- Have passed the Contract Number in this.
CONTRACT_HEADER_IN -- Have passed the values of the following fields ::
COLLECT_NO -- Sales Document number
Sales_Org -- Sales Organization
Distribution Channes -- Dist. Channel
Division -- Division
CT_VALID_T -- New date which I want as the contract end date.
CONTRACT_HEADER_INX -- Following values have been paased in this Structure.
UPDATEFLAG -- 'U'.
CT_VALID_T -- 'X'.
Now when I run the BAPI with these inputs I get the output as ' Field 'GUEEN' cannot be copied, because it is not ready for input'.This is a information message. But the changes are not reflected in the contract. I have done the commit work after BAPI.
When I changes the value for CT_VALID_T flag from 'X' to 'U' the message mentioned above does not come but the end result is same and changes are not reflected in the contract.
I would be really helpful to you if get any kind of helf to know ehy the output is not coming.
Thanks a Lot for your kind help!!!!
Regards,
Lalit Kabra

Hi Lalit,
The value for CT_VALID_T flag has to be 'X' in the CONTRACT_HEADER_INX structure.
In this case, you receive an informative message "Field 'GUEEN' cannot be copied, because it is not ready for input'"
That is the problem. You cannot change this field because your functional team has this field as "not ready for input" in change mode.
Can you change this field in transaction VA42? If you can't modify it in dialog, you can't modify it with BAPI.
Regards,

Change validity end date on activity type

Is there a way to change the validity end date of an activity typre. Currently it is 9999 we would like to change it to 2011.
We would like to use a particular activity to cost current standards but dont want to use it for planned estimates that we will create for 2011. I am assuming if the validity ends in 2011 it will resolve the problem. I know we could create alternate routings and different production version but I am trying to avoid that and see if we can find a short cut.
Your help in this regard will be much appreciated

Hey Greta,
I executed the report but it says ,"The deletion could not be carried out, plan records still exict on cost center for activity type." I have deleted every thing from kp26 for that particular combination of activity type and Cost center.
Any ideas as to what is happening!!
Regards,

What is the use of specifying an "End Date" when certifying conditionally?

Hi,
When certifying conditionally, it is possible to specify an "End Date".
* What does OIM do with this End Date?
* What happens on specified date?
* Will the entitlement be automatically removed at that date?
Note : Screen view for help.
The steps are:
1. Start any certification
2. Log in as the certifier
3. Open the certification task
4. Now you can certify any item "conditionally" and enter an end date (see screenshots 1, 2 and 3).
http://docs.oracle.com/cd/E40329_01/admin.1112/e27149/managecert.htm#OMADM5063
http://docs.oracle.com/cd/E40329_01/user.1112/e27151/usingcert.htm#OMUSG3891

I had the same thought
wilnesse dericer

Name of track changes to modified date when importing mp4

I have two .mp4 files: (both names listed below are the filenames)
Valentines Day Torin.mp4 with a modified filed date of 02/15/2010
Phoebe Confirmation Entrance.mp4 with a modified date of 03/18/2010
When I import the Valentines Day Torin file, the filename stays the same. The "Name" field is also the filename. This is what I want.
When I import the Phoebe Confirmation Entrance, the filename stays the same. The "Name" field is changed to "Mar 18, 2010 3:52pm".
Anyone know why?
Also, does anyone know how to get iTunes to stop changing the modified date on files when you change any info in the "Get Info" area.
I find it quite hard to import a lot of home videos into Itunes. File name length limitations, changing of modified dates, just can't figure this out..
I have all my videos in order according to the modified date since titles can't be more than 36 characters, but can't figure out an easy way to sort chronologically.
Thanks,
Derek

Check the file withEXIF Viewer or Reveal to see what the EXIF Capture Date is. iPhoto uses that for photos from digital cameras.
OT

How do you change the max data when creating a DVD?

I recently filmed a show and am making DVD copies. The show runs 1hour 45mins and is about 79gb in HD. I'm using compressor 4.1 to create the DVDs so it fits on one disc. I've made a few test copies but so far every DVD freezes at around 43 mins when I play it in another computer or dvd player. I heard in a blog that reducing the max data should solve the problem. This is my first time using compressor and I wanted to know where do you go to change the max data and how will that affect the video quality? Also, what is the suggested range of data limits for a project of this size?
Thanks

Duplicate the Create DVD preset from the Settings pane and name it.
Select the MPEG setting in the batch window.
Open the Inspector and click the Video tab.
Choose your "Encoding Mode" (CBR, etc.).
Uncheck Automatically Select Bit Rate.
You can then move the slider: somewhere around 4 Mb per second should be about right.
Just to add that you might also have a problem with the physical media. Try another brand to see whether that makes a difference.
Russ

Change infotypes end date when delete leaving action for employee

Similar Messages

Maybe you are looking for