Change installation directory for Anyconnect client
Hi guys,
Is possible change installation path for web-deploy of Cisco Anyconnect 3.x or 4.0 installed from ASA?
In my case, I need upgrade client from version 2.5 to 3.X or 4.0 and I need achive directory like in 2.5 version.
Version 2.5 directory: "c:\Program Files\Cisco\Cisco AnyConnect VPN Client"
Version 3.X directory: "c:\Program Files\Cisco\Cisco AnyConnect Secure Mobility Client"
Thank you
Sorry but I don't believe Cisco provides the ability to modify the destination directory.
Similar Messages
-
Creative Cloud - BUG Changing Installation Directory for Apps
I searched and could only find this similar post here
http://forums.adobe.com/message/5498967#5498967
Which stated the issue I am experiencing. In the preferences of the creative cloud desktop program I changed the installation directory to D drive because I have my main hard drive partitioned and the programs would take up too much space on C. Regardless of the change in preferences the applications were still installing to my C drive. I tried restarting and reinstalling and nothing seemed to work.
Finally I decided to reallocate my D partition back to C, I have yet to complete this because I am waiting for all the data on D to be transferred to an external drive so I can recombine it to C without losing data ( I don't know if this is necessary, I haven't recombined partitions in the operating system before, but just to be safe)
ANYWAY
As I am waiting for the transfer (Over 120gbs takes a while) I changed the installation directory in the Creative Cloud preferences back to C and went ahead and installed the program I was trying to prior to all this. Guess What? It installed to my D drive!!!
This isn't a serious bug for me, just incredibly annoying and causing a lot of extra work on my part just to install the program I wanted. However for someone who requires a different directory to install to and cannot rearrange their computer to accommodate this bug I could see it being more serious. Has anyone else had this issue and did you find a solution? Thanks.
P.S. Adobe you rock, I hope your other CC programs don't feel rushed for release like your installer doesADOBE WILL TRY TO DELETE YOUR LEGACY APPS!!!! Do NOT let them! They could put you out of business! Here is a tech support transcript, see for yourselves:
Vipin: May I have your permission to connect to your computer remotely and try to solve the problem while you watch?
ADOBE CUSTOMER: I need to know that NONE of my legacy adobe apps will be affected. CS5 suite and CS6 products will NOT be affected is that right??????????????
info: Your chat transcript will be sent to dixxx.net at the end of your chat.
Vipin: It will be affected.
ADOBE CUSTOMER: WHOA! you are saying that my CS% and CS 6 apps will be hurt and not run correctly is that right?
Vipin: We need to remove all the Adobe apps installed on your computer.
Vipin: Is that okay.
Vipin: May I have your permission to connect to your computer remotely and try to solve the problem while you watch?
ADOBE CUSTOMER: There is no way I give permission to delete CS5 creative suite, CS6 video production suite or hurt them in any way what so ever. I have THOUSANDS of dollars of plugins and other workfow products that depend on them. Sorry but my only recourse is to
ADOBE CUSTOMER: see if you have ANY loyalty to an OVER 30 years adobe customer (me) when you demand payout for the remaining 5 months of the subscription. I'm betting you will just send the bill to collections for non payment. If so, you WILL be sued for non service and non delivery of product. And yes, I am ready to spend over xxxx on a suit vs adobe because of how you have treated me. The point is I know that I am not alone, and that's sad.
Then after TECH NO SUPPORT, CSRs try to 'handle' me:
If you do decide to cancel, we can refund your subscription.
If you stay with the service, we can provide 2 free months as an apology for the technical difficulties. We cannot provide a free year.
Please let me know which you would like to do.
Thanks,
Britt
Like · Reply · 35 mins
ADOBE CUSTOMER:You want me to stay with a service that provides no product? And has not provided me with a usable product since October of 2014? And now the word is out that you are raising subscription prices after the first year? Who do you think you are? You HURT peoples ability to earn a living! You cost us hours and days and months trying trying to fix your problems so we can move forward with your products? Who in the hell do you think you are? Tell you what, dont cancel a thing. A media blitz and maybe a subpoena to San Jose is the right move to protect peoples rights. Your company needs to learn a lesson in how to treat legacy customers. It seems no one has taught you that "if you take care of the customer, they will take care of adobe." Britt, care to guess how many dollars I have given adobe in almost 30 years?
Adobe Creative Cloud Hi ADOBE CUSTOMER:
We value all our customers and would love to help resolve your issue. Would you like to arrange a callback with tech support? I can make sure the technician is a senior staff member that can offer more troubleshooting solutions. Let me know if you would like to schedule this, and what a suitable time would be.
Thanks,
Britt
Like · Reply · 19 mins
Adobe Creative Cloud Regarding Creative Cloud prices, it is noted on the purchasing page that some subscriptions offer "promotional rates for the first year only." Our full subscription terms can be viewed here: https://www.adobe.com/misc/subscription_terms.html
-Britt
Like · Reply · 18 mins
ADOBE CUSTOMER: You see, that is EXACTLY how you should take care of a customer. Tell them they are wrong and have it NOT RELATED to a simple request to FIX a company software PROBLEM. Tell your customers that after FOUR months of unusability of your product, DAYS of the customer trying to fix the company problem, that your solution is give them TWO months FREE then JACK the price up for them! You MUST have thousands of people in LINE to YOU to get this celebrated DEAL!
Like · Reply · 6 mins
ADOBE CUSTOMER: I have a hunch some adobe board members are going to have fun with your conversation and offer, Britt. I would hush up now before you have to look for a different job because I know you mean well BUT you have no experience or skills solving a client's issues and in fact, you are hurting adobe's future earnings.
Like · Reply · 2 mins
Adobe Creative Cloud I apologize for the frustration regarding Adobe's pricing policy, Kee. Please let me know if you would like additional help troubleshooting the problem. We would love to locate the cause of the download issue and get this resolved for you.
Thanks,
Britt
Like · Reply · 7 mins
ADOBE CUSTOMER: The Russian cracked version of PS 2014 will have to do on another clients machine until you have a total new WORKING release. I'm tired of being your company's test pig, doing the boiler plate cleaner routines, and having the same failures. It's one thing to have broken software, but NOT acceptable to treat customers the way I have been treated, and then, be greedy on a remediation offer from you.
You say,"We value all our customers." Again, clearly NO ONE from the BOD has taught you that if you take care of the customer, then the customer will take care of adobe.
You guys and gals have essentially asked for a fight, and a fight you shall have. good night. -
Re: Creative Cloud - BUG Changing Installation Directory for Apps
Where would one be able to find the manual installer? In CC itself or is there another place I should be looking?
Branching this to a new discussion.
Tina21 please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to uninstall the Adobe Creative Cloud applications. -
Change installation directory for SQL 2008 SP3 or CU
My C drive is full, Server built long time ago. Not enough space available in C Drive but other local drive have storage.
Is there anywhere i can use my other drive for patching or apply CU.
Env: win 2003 ,SQL 2008 SP1My C drive is full, Server built long time ago. Not enough space available in C Drive but other local drive have storage.
Is there anywhere i can use my other drive for patching or apply CU.
Env: win 2003 ,SQL 2008 SP1
Hi,
Why dont you move SQL server user data file and log file from C drive to other drives this will create space. It would require a SQL Server restart
Refer this link
http://msdn.microsoft.com/en-GB/library/ms189133%28v=sql.100%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
DAP default policy only for AnyConnect clients
Hello
Is it possible to apply DAP DfltAccessPolicy only for AnyConnect clients ?Did you ever get an answer to this question?
It seems you should be able to set up a two different client profiles. Under Authentication, ssl-client would would specify "Both" and the sslclientless would specify AAA. You would likely have to duplicate much of the other work but the requirement would be satisfied. -
Can't change default installation directory for silent installation of Flash Builder 4.5
Hello,
I'm trying to create a custom installation script for Flash Builder 4.5 in silent mode.
I have created a flash builder msi installer using "Adobe Application Manager Enterprise Edition".
I would like to change the default installation directory during silent installation.
Could you please help ?
Thank you in advance.
Best regards,
RyadThe install.xml in the "Adobe Flash Builder 4.5 Installer/deploy" folder will have the INSTALLDIR property. You can change this property to your custom location.
<?xml version="1.0" encoding="UTF-8"?>
<Deployment>
<Properties>
<!--Note that the INSTALLDIR value is machine specific. The value below is a suggested default value but may need to be overriden.-->
<Property name="INSTALLDIR">C:\Program Files\Adobe</Property>
</Properties>
<Payloads>
</Payloads>
</Deployment>
Thanks
Unni G S -
I have Firefox 2.0 (running Windows XP) and want to update it to 3.6, but the "Check for updates" option on the Help menu is grayed out and need to enable this option by changing permissions on the Firefox installation directory. I need detailed instructions on how to access the Firefox installation directory and change the permissions.
Can someone please assist?
Thank you.See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
Change project directory for Workshop?
The default project directory for workshop is
C:\bea\weblogic700\samples\workshop\applications. How do I change that.
For example I want my project to be in the directory c:\work\webservices
thxYes Raj. That helped, it worked!
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Dave,
You can change the server with which Workshop communicates by modifyingthe
Config directory entry available under the Tools->Preferences->Pathsoption
on the IDE.
In your case the config directory should be c:\
and the domain should be foo.
also make sure you change the port number entry to the one the server infoo
is listening on.
Hope this helps.
Raj Alagumalai
WebLogic Workshop Support
"Dave Remy" <[email protected]> wrote in message
news:[email protected]...
OK. I added a new domain (e.g., foo) and pointed the directory to one
of
my
choosing (c:\foo). Weblogic then created a c:\foo\applications
directory.
Ok, how do I get workshop to use that directory for my development
project(s)? When I start if from my start menu it uses the cgserver
instance and when I create a project it creates it in the samples
application directory.
"Raj Alagumalai" <[email protected]> wrote in message
news:[email protected]...
Dave,
When you create a project in Workshop, the project will be created
under
the
applications folder of the server with which Workshop is
communicating.
For
every project that you create via Workshop there is a corresponding
fully
exploded web application that is created on the WebLogic Server. This
restricts the ability to have the project reside in a different
location
other than the applications folder.
If you do not want the project to be created in the samples directoryyou
can configure a new domain via the domain configuration wizard. But
the
project would still be under the applications folder of the newdomain.
>>>
Hope this answers your question.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Dave Remy" <[email protected]> wrote in message
news:[email protected]...
The default project directory for workshop is
C:\bea\weblogic700\samples\workshop\applications. How do I change
that.
For example I want my project to be in the directoryc:\work\webservices
thx -
Change destination directory for screenshots?
I often use Cmd-Shift-3 and Cmd-Shift-4 to capture screenshots to my desktop.
To keep things a little tidier, how can I specify some other default directory for these images, e.g. a "ScreenShots" folder within the Desktop?
Thanks.Well, it depends on what you want to do. There are a number of different hidden preferences that can be accessed through the "defaults" command - but knowing they're there is a trick. Google does wonders for finding hidden preferences, where they exist.
Showing/hiding files is done with the "chflags" command.... "chflags hidden /path/to/file" to hide an item and change it to "nohidden" to show it.
Here are a couple sites that will give you more information:
http://www.mactricksandtips.com/2008/02/top-50-terminal-commands.html
http://www.macstories.net/roundups/a-collection-of-250-terminal-commands-hacks-t ips-and-tuts-for-mac-os-x/ -
Change default directory for Creative files (such as Media Databa
I'm using a Zen xtra with WinXP Pro on my company laptop. The Creative software puts a lot of files (7 MB!) in my user profile under Document and Settings. Unfortunately, this is making my profile larger than my company allows, since they back up the profile over the network.
How can I change the default directory for these file? I can't find any .ini files that might declare the path, and I can't find anything in the Windows Registry that points to my profile.
Help please?
Thanks,
LukeThanks for the suggestion of deleting the JetFileBackup folder, Micromouse. I'll try it.
Any other files look deletable? Without any way to move them, I may have to try deleting some and see what happens.
I'm not even sure which Creative programs can be uninstalled (other than Nomad Explorer) and still be able to use MediaSource to play songs from my Zen Xtra (through a USB connection). Windows Add/Remove Programs says that I've used all of these programs today:
Creative Jukebox Driver
Creative MediaSource
Creative MediaSource AudioSync Plugin
Creative MediaSource NOMAD Jukebox 2/3/Zen Plugin
Creative NOMAD Jukebox Zen Xtra
But all I've done is open MediaSource and start a playlist from my Zen Xtra. Anybody know which of those can be uninstalled without affecting my use? (Maybe this deserves a separate topic.)
Thanks,
Luke -
Changing default directory for iTunes Library.itl and iTunes Music Library.
I need to change the default directory for the files iTunes Library.itl and iTunes Music Library.xml permanently.
It must be relocated from the My Documents directory due to VPN reasons.
Has anybody an idea if this is possible? I could not find a corresponding registry entry.
Notebook Windows XP ProUsing TweakUI to Move or Create Your Library/My Music Location
Use TweakUI (See: ’Disk is locked’ or ‘iTunes folder cannot be found’ when installing or opening iTunes ) to create a 'My Music' folder in a spot where you desire. iTunes should then find this location and deposit its Library files there, and the 'iTunes' folder and sub-folders as well (if you direct it to).
First, see this Article for some background information: What are the iTunes Library files?
If you cannot see the ‘My Music’ folder within the TweakUI drop-down selection, proceed on to the following:
1 On the start menu go to ‘Run’
2 Type in RegEdit
3 Navigate in RegEdit to HKEYCURRENTUSER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
4 Delete any entry for ‘My Music’
5 Navigate up the tree to HKEYCURRENTUSER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
6 Make sure there is an entry for ‘My Music’ and is pointing to C:\Documents and Settings\[username]\My Documents\My Music (you can edit the value by double clicking it)
7 Close RegEdit
8 Reboot
iTunes &/or TweakUI should now be able to find the folder. -
Call library function will not retain change of directory for the library.
I have created a call to a dll made in Visual C++. Everything works fine. I then configure the vi to call the a newer version of the library that is in another directory. The Call Library Function dialog box updates with the new path. I click the OK button. Then configure the vi again to very my change took and it is back to the original path to the library.
Why can I not change where to find the library? I am sure that I can make a new vi an input all the parameters again, but I have many parameters and calls to the same dll. Making new ones each time the location of the dll changes is not an option.
Thanks for your help.
Attachments:
code.zip 106 KBIf you have more than one VI accessing the same DLL, then you can't
change the DLL location without unloading all the other VIs first. This
is because Windows will always look first for the DLL in memory, before
even attempting to load it from disk. And if another VI makes use of
that DLL it will be still kept in memory.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
To change the directory for oracle
hi to all
I have installed oracle 8.05 in E:\ directory but now i want to reinstall oracle Enterprise edition in C:\ directory
The operating system is Windows NT 4.0
I need help in order to uninstall oracle & install it into new directory,because when installation runs i always seen E:\directory which is written disable one can't change the previously written directory..
Can anyone answer me in detail soon..thanks
do tell me all the steps of removing oracle completely from computerHi Khalid,
I did face the same problem removing Oracle 8.0.5. Even on installing some sub-dir and files would remain. i.e, the system dose not allow you to delete some files.
I disabled all the Oracle related services from the servises screen and then deleted the ORANT dir.
This cleaned my drive of any oracle files. Then I installed the Oracle 8i on the machine.
Hope this will be of some help to you.
Raj ... -
Can't change home directory for standard users (admin is OK)
I'm can't relocate home directories for standard users. Relocating works fine for admin users.
When a standard user logs in, they get a message (paraphased) saying "the home directory is not available. If it is located on a server, the server might not be online". If I change the standard user to admin, this message goes away, and everything is fine.
I created a standard user
moved the home directory using the terminal as root: mv UserName /otherlocation/UserName
I then went into users and groups, other options and changed the home directory location.
Rebooted, then tried to log in as the standard users.
Next try - Deleted the standard user and created the same user with admin rights. Followed the above steps and everything works fine.
I don't want this user to have admin rights on my system. Any ideasHi,
the AFP is has always been switched on. As for the path I believe this to be correct. The path I am using is:
afp://musicserver/Users
I'm not at the server right now so I mat have got the afp and : and / in the wrong order here but they are correct on the server.
This however does not seem to put the a folder in the Users folder. Could it be something to do with my external hard drive? I am using a Mac Mini as our server (not ideal but fine for us, or at least was) this is booted from our external hard drive. This is the main system drive which is where the Users data is also stored. I have tried all possible paths I can thing of from replacing the 'musicserver' with the IP address. I have also tried adding the name of the drive to the path (System) but all does not work.
Are you able to suggest anything I have missed? Perhaps I'm doing the path wrong?
Thanks again
Chris
Maybe you are looking for
-
Easiest way to write XMP data or files into a PDF file
Hi, I wrote a little Adobe Air application, which is intended to generate XMP files for being imported into PDF files. Now I'm searching for the most efficient solution to import these XMP files. I'd be happy if I could select a PDF file from my Adob
-
File System repository manager
Hi All, I am working on configuring a File System Repository Manager. I followed the documentation at http://help.sap.com/saphelp_nw70/helpdata/EN/e3/92322ab24e11d5993800508b6b8b11/content.htm and https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg
-
IPod Sync error -48, cannot update any longer
An intractable and frustrating problem has surfaced on my iPod and I'd appreciate any advice. System: Powermac G5 Dual 2.0, iPod 80GB. All newest software, firmware, etc. installed. Problem: A few weeks ago, after adding songs ripped from a CD, the i
-
Hi, Is there any function module, BAPI for transaction COWBHUWE to post goods reciept for Process Order? I have tried below function modules - 1) HU_CREATE_GOODS_MOVEMENT: The FM is get out at line no 56 as the Object Type for all the HUs i have foun
-
Need inputs on QM functionlity details about..
Hi, I need information about SAP Quality Management functionalities to capture below points in an organizational environment. u2022 Records Management u2022 Audit Management u2022 Document & Procedure Control u2022 Non Conformance Pro