Change internal table values in background job

Hello All,
Currently we have a report which is running in background job.
Because of error in one PO (error in header status), the job is getting cancelled in production.
Is there any way, we can exclude this PO in debugging from the internal table.
The report should run in background, the requirement is exclude the PO from internal table and the background process should run as normal after excluding that PO.
Please advise how to do this.
Thanks,
Priya

Hi All,
Thanks for your replies.
I found the following way to debug the background job helpful. Go to SM37, select the job name and do as shown below. Once you click Capture: Active job, debugger will open and we can analyze from there further.

Similar Messages

How to Refresh "Internal table values" in User EXIT.

Dear All,
My requirement is to place some checks in exit ZXQQMU20 in different tabs from the TCODE IW21 . IW22 etc.
Now after placeing the checks towards the different tabs while doing "NOCO" from IW21 the conditions are fullfilled but
when i go ahead to modify the created "NOCO " from the TCODE IW22 by deleting the created values and saving in IW22 , the conditions written in the exit are still satisfied eventhough i have deleted the values in IW22.
The reason for this is that the tables which are there in the exit ZXQQMU20 T_VIQMFE , T_VIQMUR , T_VIQMMA
still contains the old values which were there at the time of creation of "NOCO" in IW21 .
How to refresh my " internal tables values" used in such that even at the time of modification of the NOCO through IW22 my table values should pick the current screen values and not the values which were there at the time of creation.
Please help.
The code i have written in the exit is as below:-
********************* Changed vide ******START
*****IW21 IW22 also added in filter criteria of notification *************
******The purpose of this modification is that in the execution of IW21 or IW22 or IW24 or IW25 we have to give a check that if the
******notification type is M2 than inside the Transaction screen , if the Breakdown duration comes less than 15 min than there are
******no issues but if the breakdown duration is more than 15 min than the mandatory fields needs to be entered in the analysis tab.
**    The user has to fill up either following mandatory fields in Analysis Data tab.
**    A. Object Parts & Damages sub tab
**    Code Group - Object Parts (OTGRP, VIQMFE)
**                          AND
**    Code Group - Problem / Damage (FEGRP, VIQMFE)
**    Or
**    Notification Item Short Text (FETXT, VIQMFE)
**   B. Cause sub tab
**    Code Group # Causes (URGRP, VIQMUR)
**    Or
**    Cause Text (URTXT, VIQMUR)
**   C. Action Taken sub tab
**    Code Group # Activities (MNGRP, VIQMMA)
**    Or
**    Activity Text (MATXT, VIQMMA)
**            Then, allow user to complete notification (NOCO).
CLEAR : L_VAR , L_COMP_TIME.
IF ( SY-TCODE EQ 'IW21' OR SY-TCODE EQ 'IW22' OR SY-TCODE EQ 'IW24' OR
      SY-TCODE EQ 'IW25' ).
   IF ( E_VIQMEL-IWERK = '061' ) OR ( E_VIQMEL-IWERK = '062' ).
     IF E_VIQMEL-QMART = 'M2'.
       L_VAR = E_VIQMEL-AUSZT.
       L_COMP_TIME = L_VAR / 60.
       IF L_COMP_TIME < 15.
         EXIT.
       ELSEIF L_COMP_TIME > 15..
*         IF ( T_VIQMFE-OTGRP IS INITIAL AND T_VIQMFE-FEGRP IS INITIAL ) OR ( T_VIQMFE-FETXT IS INITIAL ) .
*           MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
*         ENDIF.
         IF T_VIQMFE-OTGRP EQ '' OR T_VIQMFE-FEGRP EQ ''.
           IF T_VIQMFE-FETXT EQ ''.
             MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
           ENDIF.
         ENDIF.
         CLEAR L_TAG.
         IF T_VIQMUR[] IS INITIAL.
           MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
         ELSE.
           LOOP AT T_VIQMUR.
             IF T_VIQMUR-URGRP IS INITIAL .
               IF T_VIQMUR-URTXT IS INITIAL.
                 L_TAG = 'X'.
               ENDIF.
             ENDIF.
           ENDLOOP.
           IF L_TAG = 'X'.
             MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
           ENDIF.
         ENDIF.
         CLEAR L_TAG.
         IF T_VIQMMA[] IS INITIAL.
           MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
         ELSE.
           LOOP AT T_VIQMMA.
             IF T_VIQMMA-MNGRP IS INITIAL .
               IF T_VIQMMA-MATXT IS INITIAL.
                 L_TAG = 'X'.
               ENDIF.
             ENDIF.
           ENDLOOP.
           IF L_TAG = 'X'.
             MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
           ENDIF.
         ENDIF.
       ENDIF.
     ENDIF.
   ENDIF.
ENDIF.
<Added code tags>
Thank you so much in advance..
-Sudhish
Please use the code tags when you're posting any code snippet
Edited by: Suhas Saha on Jul 13, 2011 12:39 PM

Hi, I was thinking just like XVBAP and YVBAP values in the USEREXIT_SAVE_DOCUMENT.
Plz check u have x /y versions or tables like _old/ _new suffixes and then move the value accordingly.
otherwise there may be inconsistency.
Edited by: Prasenjit S. Bist on Jul 13, 2011 3:03 PM

Submititng the program to another program using internal table values

Hi All,
How to Submit from one program to another program using internal table values minimum 7 int tables without using the seletion screen
thanks
raj

Hi All,
Thank you very much for your inputs.
i am facing another issue:
For each 10,000 records it should trigger a job (we are trying to call a program) were the validation will be done only through the other program.
please find the code mentioned below :
TABLES : but000.
DATA: int_bp LIKE but000 OCCURS 0 WITH HEADER LINE.
data released like BTCH0000-CHAR1.
DATA: jobnumber LIKE tbtcjob-jobcount, " Job ID and
      jobname LIKE tbtcjob-jobname, " job name.
      startdate LIKE tbtcjob-sdlstrtdt, " Start-time
      starttime LIKE tbtcjob-sdlstrttm, " window specs.
      laststartdate LIKE tbtcjob-laststrtdt,
      laststarttime LIKE tbtcjob-laststrttm,
      job_released LIKE btch0000-char1. " JOB_CLOSE: Was job released?
DATA : l1 TYPE i,
       b_size TYPE i,
       b_cursor TYPE cursor.
INITIALIZATION.
b_size = 5000.
START-OF-SELECTION.
OPEN CURSOR WITH HOLD b_cursor
     FOR
     SELECT *
     FROM but000
     WHERE bpkind = 'AA'.
IF sy-subrc = 0.
    DO.
      FETCH NEXT CURSOR b_cursor INTO TABLE int_bp
                                           PACKAGE SIZE b_size.
Note : here in this point we are getting a dump for the second job trigger.
      IF sy-subrc = 0.
        CLEAR jobname.
        CONCATENATE sy-repid sy-datum sy-uzeit INTO jobname.
export int_bp to memory id 'ABC'.
        CALL FUNCTION 'JOB_OPEN'
             EXPORTING
                  jobname          = jobname
             IMPORTING
                  jobcount         = jobnumber.
            EXCEPTIONS
                 cant_create_job = 1
                 invalid_job_data = 2
                 jobname_missing = 3
                 OTHERS           = 4
CALL FUNCTION 'JOB_SUBMIT'
      EXPORTING
           authcknam = sy-uname
           jobname   = jobname
           jobcount = jobnumber
           report    = 'YTEST_RRR'.
           variant   = lv_variant.
   SUBMIT ytest_rrr
      VIA JOB jobname NUMBER jobnumber
      AND RETURN.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
       event_periodic                    = 'X'
        jobcount                          = jobnumber
        jobname                           = jobname
        strtimmed                         = 'X'
      IMPORTING
        job_was_released                  = released
        else.
        EXIT.
      ENDIF.
    ENDDO.
calling program :
REPORT YTEST_RRR .
data itab1 like but000 occurs 0 with header line.
data l type i.
import itab1 from memory id 'ABC' .
describe table itab1 lines l.
free memory id 'ABC'.
write:/ 'total records are:', l.
Please give your suggestion why its going for dump in the second iteration.
thanks in advance.

Internal error occurs in background job scheduling

Hi Experts,
We are facing an error message "Internal error occurs in background job scheduling" while trying to execute a custom report(Z report) in background in SA38.
Please find the following observation on our side on this message.
1) This message is not coming for only one report not for others.
2) SU53 screen shot shows that SE38 check is failed, but the weird thing is not happening for other report.
3) Persons having SE38 auhtorization are able to run this report.
Please advise.
Thanks in advance,
Viven

What is the message ID and number? Have you tried OSS search and debugging?
What does this program do, in a nutshell?

How to bind internal table values with RootUIElement(Table) from select Que

Hello Friends,
       In my view Layout,there r two Input fields ,Submit button and Table... My concept is when user posting values in two input fields and clicking submit button means the result(more than one values) should be displayed in Table...
     I written coding also but i dont know to bind internal table values with Table... My code as follows,
method onactionsearch .
   data:
     Node_Node_Flight                    type ref to If_Wd_Context_Node,
     Elem_Node_Flight                    type ref to If_Wd_Context_Element,
     Stru_Node_Flight                    type If_View1=>Element_Node_Flight ,
     itab TYPE STANDARD TABLE OF sflight.
navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
   Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
@TODO handle not set lead selection
   if ( Node_Node_Flight is initial ).
   endif.
get element via lead selection
   Elem_Node_Flight = Node_Node_Flight->get_Element( ).
@TODO handle not set lead selection
   if ( Elem_Node_Flight is initial ).
   endif.
alternative access via index
Elem_Node_Flight = Node_Node_Flight->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Node_Flight is initial ).
endif.
get all declared attributes
   Elem_Node_Flight->get_Static_Attributes(
     importing
       Static_Attributes = Stru_Node_Flight ).
select * from sflight into CORRESPONDING FIELDS OF TABLE itab
WHERE carrid = Stru_Node_Flight-carrid and connid = Stru_Node_Flight-connid.
Node_Node_Flight->bind_table( new_items = itab ).
endmethod.
Plz reply me asap...!

Hi,
What I understood from your coding is...
* navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
You are reading values from the above node and binding the values to the same node.Am i right?
Did you take seperate context node for your input fields or binded the above context to the fields.If not then read the context attribute values which are binded to the carrid and connid then pass these values to select query.
One more thing is select cardinality 1..n for node NODE_FLIGHT since you are displaying more than one record.
Go through the some basic tutorials.Search in sdn you will it get.Already there is a tutorial in sdn which explains exactly what do you require.
Go throgh this link
Web Dynpro for ABAP: Tutorials for Beginners
Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
Edited by: suman kumar chinnam on Mar 26, 2009 10:50 AM

Passing '**********' to screen field value instead of internal table value

Hi All,
I have written BDC, in which when i pass value for second screen "Description type field" it's passing '*************************' instead of internal table value.
It's picking correct value for first internal table value. Could anyone please give an idea why it's happening?
Please find the code:
LOOP AT it_record.
header data for BDC
   AT NEW CLASS.
    IF sy-tabix <> 1.
        perform bdc_dynpro      using 'SAPLCLMO' '7777'.
        perform bdc_field       using 'BDC_OKCODE'
                                '=SAVE'.
        CALL TRANSACTION 'CLWM' USING bdcdata
                      MODE p_mode
                      UPDATE 'S'
                      MESSAGES INTO messtab.
        clear : bdcdata[],bdcdata.
    ENDIF.
    perform bdc_dynpro      using 'SAPLCLMO' '0200'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RMCLM-CLASS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RMCLM-CLASS'
                                  it_record-class.
    perform bdc_dynpro      using 'SAPLCLMO' '7777'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RMCLM-KLBEZ'.
    perform bdc_field       using 'RMCLM-KLBEZ'
                                  it_record-klbez.
    perform bdc_field       using 'RMCLM-STATU'
                                  '1'.
    perform bdc_dynpro      using 'SAPLCLMO' '7777'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=MERK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RMCLM-KLBEZ'.
    perform bdc_field       using 'RMCLM-KLBEZ'
                                  it_record-klbez.
    perform bdc_field       using 'RMCLM-STATU'
                                  '1'.
    MOVE 1 TO IDX.
    ENDAT.
line item data for BDC
        perform bdc_dynpro      using 'SAPLCLMO' '7777'.
        perform bdc_field       using 'BDC_OKCODE'
                                   '/00'.
        perform bdc_field       using 'BDC_CURSOR'
                                    'RMCLM-RELEV(02)'.
        CONCATENATE 'RMCLM-MERKMA(' IDX ')' INTO FNAM.
        perform bdc_field       using FNAM
                                    it_record-merkma.
        CONCATENATE 'RMCLM-RELEV(' IDX ')' INTO FNAM.
        perform bdc_field       using   FNAM
                                   it_record-relev.
        IDX = IDX + 1.
ENDLOOP.
Thanks,
Ujjwal

Hi Ujjwal
The reason behind this is that you are using AT NEW.... ENDAT block in your coding.
When you use AT NEW field statements, the fields in the work area after the field get converted into ********.
Check values in your work area I_RECORD in debugging inside AT NEW statement and you will understand what I am saying.
In your case all the fields from header line of I_RECORDS which come after field CLASS are getting converted into *******,
hence the error.
Try using a temporary work area, say w_record. Pass value of I_record to w_record before AT NEW statement.
And use w_record-fields instead of I_record-fields. And your program should work.

Change internal table data in another program

Hi Gurus,
Is there a way to change internal table data from BADI of a method in main program using (SAPLV13A)db_xkondat[] internal table? Here SAPLV13A is main program name and db_xkondat[] is an internal table in the BADi call function.
Thanks.
Edited by: K V Subbarao on May 15, 2010 10:55 AM

Hi,
yes, you can use the trick with field symbols ( ASSIGN ('(PROGRAM)TABLE[]') TO <table> ). You just need to define field symbol with table type. Just be careful. Let say that this trick is not the proper way and you need to be extra careful.
Cheers

How to convert Internal table values to excel file

Hi Experts!!!
I have requirement to generate a Excel(.xls) file for a requirement. For this the final internal table values has to be moved to excel file. I have used function module "SAP_CONVERT_TO_XLS_FORMAT" to generate it to my local machine. But when i tried to generate the file in "AL11" folder its giving a dump. Ex(/sapia/iface/out/comm/saphr/test.xls). Can anyone please tell me is there anyother function modules or program to generate in sapia folder.
Thanks.
Ganesh R K

try to save as a tab delimited.

How to pass internal table values to parameter

hi,
         how to pass internal table values to parameter in selection screen.if is it possible means please sent codeings.
thanks.
stalin.

hi,
tables : mara.
data : begin of itab_mara occurs 0,
          matnr like mara-matnr,
          ernam like mara-ernam,
          end of itab_mara.
selection-screen : begin of block blk1 with frame title text-001.
parameters : p_matnr like mara-matnr.
selection-screen : end of block blk1.
select matnr ernam from mara into corresponding fields of itab_mara
                                                                where matnr = p_matnr.
loop at itab_mara.
write :/ itab_mara-matnr,
           itab_mara-ernam.
endloop.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Change internal table structure dynamically

Dear Experts , I have a requirement to add an attribute to already declared internal table which is declared in standard SAP code, is it possible to change internal table structure dynamically.
my internal table is of type merel_t_grid2 which is standard table type in SAP , now I want to add an attribute of type LVC_T_STYL in my internal table so that I can modify the cell property of ALV grid.
I cant append LVC_T_STYL in standard structure because enhancement category of merel_t_grid2 is of type char and not deep
my internal table contains data to be displayed in ALV.
please help

Dear Experts , I have a requirement to add an attribute to already declared internal table which is declared in standard SAP code, is it possible to change internal table structure dynamically.
my internal table is of type merel_t_grid2 which is standard table type in SAP , now I want to add an attribute of type LVC_T_STYL in my internal table so that I can modify the cell property of ALV grid.
I cant append LVC_T_STYL in standard structure because enhancement category of merel_t_grid2 is of type char and not deep
my internal table contains data to be displayed in ALV.
please help

Dynamically changing internal table in 'gui_download'

Hi Experts,
                 i have to download 4 internal tables, each with different structures, to the presentation server using 'gui_download', based on which radio-button is selected in the selection screen. I am hoping to use a single 'form' and 4 'perform' calls. how can I dynamically change the tables in the 'gui_download' function modules.
plz help.....................

Hi ,
Build the field catalog dynamically based on the internal table structure based on the radio button selected.Use the dynamic internal table generated from the filedcatalog and use in GUI_DOWNLOAD.
See the below code:
*& Report ZRAJESH02
REPORT zrajesh02.
Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
              <dyn_wa>.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
      it_fldcat TYPE lvc_t_fcat.
DATA: lv_monate TYPE f,
      lv_months TYPE i,
      lv_date TYPE sy-datum,
      p_check1 type n value '1'.
lv_date = sy-datum + 360.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_check TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis   = lv_date
      i_datum_von   = sy-datum
      i_kz_incl_bis = ' '
    IMPORTING
      e_monate      = lv_monate.
lv_months = lv_monate.
PERFORM f_fcat USING 'AUFNR' 'CHAR' '12'.
PERFORM f_fcat USING 'POSNR' 'CHAR' '06'.
while p_check1 LE p_check.
PERFORM f_fcat USING p_check1 'CHAR' '1'.
p_check1 = p_check1 + 1.
endwhile.
PERFORM build_dyn_itab.
LOOP AT <dyn_table> INTO <dyn_wa>.
    WRITE:/ <dyn_wa>.
ENDLOOP.
FORM f_fcat USING fieldname dattyp length.
DATA:wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = fieldname.
wa_it_fldcat-datatype = dattyp.
wa_it_fldcat-intlen = length.
APPEND wa_it_fldcat TO it_fldcat .
ENDFORM.                    "f_fcat
*&      Form build_dyn_itab
      text
FORM build_dyn_itab.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data.
wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'AUFNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 12.
APPEND wa_it_fldcat TO it_fldcat .
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'POSNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
APPEND wa_it_fldcat TO it_fldcat .
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
ENDFORM.                    "build_dyn_itab
Thanks,
Rajesh.

Internal table values to select-options

Hi,
I have to modify an existing program.
here
1. I am populating one field in the selection-screen with a file path which contain some data.
2. then this file i am converting into an internal table.(At selection-screen event)
<b>Now, i have to pass this data of the internal table to a select-option in the selection-screen back.</b>
how it is possible, i have tried a lot.
please help me.
Regards,
Maahi.

tables bkpf.
data: begin of itab occurs 0.
INCLUDE STRUCTURE alsmex_tabline.
data end of itab.
PARAMETERS p_fpath like rlgrap-filename.
SELECT-OPTIONS rbelnr FOR bkpf-belnr.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fpath.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
*   PROGRAM_NAME        = SYST-REPID
*   DYNPRO_NUMBER       = SYST-DYNNR
*   FIELD_NAME          = ' '
   STATIC              = 'X'
*   MASK                = ' '
CHANGING
    FILE_NAME           = p_fpath
* EXCEPTIONS
*   MASK_TOO_LONG       = 1
*   OTHERS              = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                      = p_fpath
    I_BEGIN_COL                   = 1
    I_BEGIN_ROW                   = 1
    I_END_COL                     = 1
    I_END_ROW                     = 2000
TABLES
    INTERN                        = itab
* EXCEPTIONS
*   INCONSISTENT_PARAMETERS       = 1
*   UPLOAD_OLE                    = 2
*   OTHERS                        = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
sort itab by value.
delete adjacent duplicates from itab comparing value.
now after this i have to implement the logic in 3rd point.
thanks ,
Maahi

How to paas internal table value

how to pass internal table first value to a variable plz help me

Hi dulla anjan prasad
   You can use the LOOP statement to process special loops for any internal table.
LOOP AT itab result condition.
statement block
ENDLOOP.
This reads the lines of the table one by one as specified in the result part of the LOOP statement. You can then process them in the statements within the LOOP - ENDLOOP control structure. You can either run the loop for all entries in the internal table, or restrict the number of lines read by specifying a condition. Control level processing is allowed within the loop.
The sequence in which the lines are processed depends on the table type:
·        Standard tables and sorted tables
The lines are processed according to the linear index. Within the processing block, the system field sy-tabix contains the index of the current line.
·        Hashed tables
As long as the table has not been sorted, the lines are processed in the order in which you added them to the table. Within the processing block, the system field sy-tabix is always 0.
You can nest LOOP blocks. When you leave the loop, sy-tabix has the same value as when you entered it. After the ENDLOOP statement, sy-subrc is zero if at least one table entry was processed. Otherwise, it is 4.
The loop may not contain any operations on entire internal tables that change the table. However, you should remember that even saving a global internal table with the LOCAL statement in a procedure is a change operation on the entire table, since it exchanges the table contents. When you call procedures within loops, you should therefore check that it does not change the entire internal table. If you change the table, the loop can no longer work properly.
If you insert or delete a table entry within a loop pass, it is taken into account in subsequent loop passes as follows:
·        If you insert a line after the current line, it will be processed in a subsequent loop pass.
·        If you delete a line after the current line, it will not be processed in a subsequent loop pass.
·        If you insert a line before or at the current line, the internal loop counter will be increased accordingly.
·        If you delete a line before or at the current line, the internal loop counter will be decreased accordingly.
If this information is usefull plz do reward points....
Message was edited by:
        ARUN

Summing the internal table values

Hi Experts,
I have requirement in report to add the values in the internal table based on document no.
for example
Document no         date                         Amount                Exchange Rate
190000012         05.04.2009                     100                                1
190000012         05.04.2009                     200                                1
190000012         05.04.2009                     300                                1
190000013         05.04.2009                     100                                1
190000013         05.04.2009                     200                                1
190000014         05.04.2009                     100                                1
If i use Collect or On change statements , the exchange rate is also adding
Document no         date                         Amount                Exchange Rate
190000012         05.04.2009                     600                                3
190000013         05.04.2009                     300                                2
190000014         05.04.2009                     100                                1
But i want to add only the amount field not the exchange rate .Please suggest me the best solutions.
I want to display as
Document no         date                         Amount                Exchange Rate
190000012         05.04.2009                     600                                1
190000013         05.04.2009                     300                                1
190000014         05.04.2009                     100                                1
Thanks in advance
satish

hi,
check this
Sort itab by documentno.
Loop at itab1.
on change of itab1-dcno.
clear total.
move itab1-docno to itab2-docno.
itab2-total = itab-amont.
move itab1-total to itab2-total.
move itab1-date to itab2-date.
move itab1-rate to itab2-rate.
flag = ' '.
append itab2.
clear itab2.
else.
itab2-total = itab2-total + itab-amont.
endon
Endloop.
it will work for adjest append statement according to the out put .
~linganna

How to store internal table value in single variable

hi gurus,
i have 3 value in int table , so want to store the value of int table into single variable of type string.
how it is possible

hmmm, your requirement is kinda weird and you could have given us a bit more info, but well lets start.
Why is your requirement weird?
Well an internal table kinda is a variable itself, or rather a set of variables which together make up for a line type of your table.
So you have a value you already have in a variable and now want to store it in anotherone? Seems weird.
What type is your internal table?
Do you have those three values in one record or in three records which only hold one value each?
Which of your values do you want to store in another variable?
Anyway, make a F1 on the "READ TABLE" statement, this should definiteley help you.
The "LOOP AT WHERE" statement could as well help if there should occur probrlem using READ TABLE.
/edit DAMn i was posting this while you gave us more info.
So still the question stays if you got your three values in one record or in three records.
DATA: lv_variabl_containing_all type char100.
loop at itab into wa.
concatenate lv_variabl_containing_all wa-value into lv_variabl_containing_all seperated by space.
endloop.
after the loop you now got all your values in lv_variabl_containing_all.
That is for the case you got three records.
other case would be
Read table itab into wa index 1.
concatenate wa-value1 wa-value2 wa-value3 into lv_variabl_containing_all.
Edited by: Florian Kemmer on Apr 16, 2010 12:59 PM

Change internal table values in background job

Similar Messages

Maybe you are looking for