Change IP after ISE CoA

I have heard of this issue before, but am not quite sure how to stop it...
Client connects to switch, switch contacts ISE on the backend. Client gets IP address on VLAN 30 in the meantime. ISE determines client belongs in VLAN 60 and performs CoA. Switch changes VLAN, but client still has an IP address in VLAN 30.
Anyone have a good way to stop this? The only thing I've heard is to put a pre-auth ACL on the port denying DHCP. But I am having issues even getting that to work.
Thanks.

This would actually fit my ultimate intended model, where an auth failure authorizes the client on the Guest VLAN. Is the critical auth VLAN able to be used in closed mode?
Response: Yes, you can. I was really talking about the usage of the following commands:
authentication event server dead action reinitialize vlan fail_safe_vlan
authentication even server dead action authorize vlan fail_safe_vlan
Those commands are very useful when you need to protect yourself against ISE/Radius outage. However, when you ave a pre-auth ACL and the Radius server is down, there is nothing (no Radius server) left to push a dACL and replace the pre-auth ACL. Thus, even though endpoints are allowed on the critical VLAN, the pre-auth ACL is still there, thus preventing clients from gaining access to the network. With the Cat3850 you can have a critical ACL. With the 3750s running IP Services you can configure an EEM script that can remove the ACL in the event of an ISE outage
Leaving them all on the same with with SGTs isn't really an option here. The reason why is that many of these machines are machines that do not get updated regularly, so they are vulnerable. We have them in a VRF. Therefore, they need to be in a different VLAN.
Response: SGT can actually provide layer 2 segmentation too :) SGT/SGA is really the future of TrustSec
Thank you for rating helpful posts!

Similar Messages

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

Create a user through the API and "Prompt user to change password after next login".

Using the Adobe Connect Interface, I can create a user and check the checkbox to "Prompt user to change password after next login".
Can I achieve the same result using the API? The principal-update action doesn't offer such an option and, as far as I can tell, there isn't another action to do so either.
Thank you.

You can achieve it as part of your application functionality, but not as a configuration option on WLS.

Locking PDF but only allow further signatures & get the list of of changes made after signing

Hi,
I have looked at Adobe Acrobat 9.0 and found the Signing > locking feature which blocks any changes after the document is signed. I need to know whether using Acrobat SDK, one could implement a similar locking option via plugin in a way that it ONLY allows further blank signature fields to be created or sign existing ones and locks all other changes. If possible, any pointers to API functions would be appreciated.
If the above is not possible using Acrobat SDK 9.0 then can the SDK provides a list of all the set of changes made after the signing is performed (at the time of verification) in the form of some codes which can guide the plugin author about what change after signing was done e.g.
a blank signature field was signed
a blank signature field is created
watermark has been applied
form is filled
sticky notes/stamps/other annotations are added
Regards,
mwak

Thanks for your response. I have just performed this:
I signed a PDF ( having no prior signature or blank signature fields ) using Adobe Acrobat 9.0 and locked it. I am now not able to create more signatures on this PDF. I believe I can't add more signatures even using the Acrobat SDK and Lock means complete lock-down of the document. This is different to what you said " it restricts modifications EXCEPT for other signings" or may be I am not understanding it clearly.
I created two blank signature fields. When I clicked on the first, there is no Lock settings at the time of signing. I believe because If it is locked then the next signature can't be signed. With only a single signature field present, the lock feature is there.
So I believe I have to resort to the option of identifying the changes in a revision and then if it the change is related to say adding stamps, sticky notes prompts the user at the time of verification.
Can some one point me to the API functions set which identify list the objects which have changed after signing.
Regards,
mwak

How to change an after login page?

Does anyone knows how to change an after login page from a default page 1 to, let's say page 200?

Jessica,
The URL to run your application is http://apex.oracle.com/pls/otn/f?p=23533.
If you use this, page 3 is the first page shown after login.
Using the URL you gave runs the Application Builder, not your application. If you use the Builder's Run Application icon to run your application, the page in your application that you are requesting is page 1 (or whatever is in the application's Home URL attribute). But running your application this way is something you do in a development environment only
Your basic question has to do with how end users would get to a particular after-login page. End users do not have access to the Application Builder.
Scott

Why is the position of key frame BEFORE scene changes not after?

Why is the position of I frame BEFORE scene changes not after?
And, why doesn't MovieVideoChart show any I frames other than those that correspond to periodic "key frames every X frames"? Is it reading meta data and not really showing where the real existing I frames are located? I.e. WYSIAL (what you see is a lie)? If so, where can I get an affordable tool that will let me examine my files in this regard?
I have put compression and chapter marks at scene changes in FCP and have exported with markers for DVDSP (both chapter and compression).
I have read on this forum (somewhere) that when insert key frames every X frames is selected, Compressor is still going to insert key frames automatically at key frames.
When I last encoded with H.264 in Compressor, I selected option to insert I key frame every 90 frames (fps=29.97).
When I jump to chapter in my encoded video, where I had place a key frame at a cut, I end up with a chapter at the frame BEFORE the cut.
I will try moving my chapter/compression marks a frame ahead and see if that helps.
Certainly, others must have been plagued by this problem.
When encoding with MPEG2 for DVD, the same thing happens.
It is a real problem. I get one frame appearing before the cut in chapter skips.
Hope someone can illuminate this problem.

Hi there
As you have seen, RoboHelp doesn't understand how to create the layers you are wanting to achieve the effect in Word. It simply brings the images in as separate objects.
Basically there are two approaches you might consider.
You could insert Positioned Text Boxes and configure them to present the images as you want. If you take this approach, you will likely find yourself struggling to maintain the positioning consistently as well as noticing text flow issues. Personally, I'd avoid that approach.
The other approach involves displaying the images in your Word document so that you see them as intended, then screen capture so you grab the combined image. Then save that combined image and use it instead of the separate images in RoboHelp. This is the approach I'd suggest and that I use myself.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

BED not changing value after Qty change in MIGO

Hi,
When we are doing MIGO, a message is coming - Ensure that you can receive more quantity on the same excise invoice..after that we can't save the document.
Scenario:
First i do J1IEX, there Excise Invoice Quantity was 1216 and BED was 684.61 on it.
But when we do MIGO, We are just changing the Qty from 1216 to 1000. BED should calculate automatically after change the Qty but not changing.
After that when we are going to post the document, above mentioned message coming and document not saved.
Please guide..
Anil

Solved myself..
Solution is maintain the Excise Group with below path: -
SPRO--> Logistics General --> Tax on Goods movement --> India --> Basic Settings --> Maintain Excise Group.
Now db click on suitable Excise Group. There, check on EI capture under MIGO Settings window.
After done that at the time of MIGO, BED rate should calculate automatically.
Thanks all....

User change password after first logging in Oracle 11g

Hi
Can you help someone in connection with this problem:
user can not change password after first logging in Oracle 11g
All the best
Ragip Avdijaj

Sounds like they are not getting logged in at all, so they are never getting to the point where they can change the password, but we need to see more detail to give a better answer (an example or copy-paste of a sqlplus session might help)

I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth,what can I do to restore ?

I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth, what can I do to restore restore them, they are very importent to me !!!
Please I'll be thankfull.

I stated that I did try to do all of this when I first set up the new computer...I did do the Setup Assistant numerous times but my old computer kept freezing half way through. Even if I did it when I first got the new computer back in Septemeber, I would have had the same issue b/c my old computer has been 'broken' for a while. My old computer can't handle doing too much at once and I think the setup and then migration functions I tried were too much. That's why I was hoping I could use the migration function piecemeal. I wish I could just check off the exact files and folders I want vs. having to choose it at the 'user' level...that's too much for my old computer to have to transfer.

It takes 1 min to change pages after clicking on and the ferris wheel just turns and turns forever

Why does it take 1 min or longer to change screens after clicking on one.?

What year, screen size, CPU speed and amount of RAM installed?
How full is your Mac's hard drive?
How many applications do you run simultaneously in the background while working in another application?
Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
Do you run any "crapware" like Mackeeper or any other type of "crapware" like so called hard drive "cleaning" apps?
Have you downloaded and installed anything from the Internet, recently?
Also, so I cover all of the bases from now on, your iMac's hard may, possibly, be failing.

User must change password after reset?

I am looking at the password policy settings and am wondering what "User must change password after reset� actually does. I turned it on. I tried changing some passwords in an ldap client and didnt get any messages or errors after authn again. And I didnt see a special attribute in the persons entry. Any clues?

When the flag is enabled and the password is changed by "cn=directory manager", the next time the user authenticate, the server returns the Password Expired Control (with a Success code) and all requests other than modify of userPassword are rejected.

Garage Band '11, version 6.0.5 will not change key after new project is started

Garage Band '11 version 6.0.5: Cannot change key after new project is started.
It has always worked ok prior to this. And I have had other issues. How do I reinstall Garage Band '11?
I have looked in downloads, but can'ty find any download file. I had upgraded to Mac OSX 10.6.8 couple years back, which included
Garage Band '11, a new ITunes & new IPhoto.

Before reinstalling I'd try HangTime's fix for "oddball" problems and delete the User preferences and repair permissions, see the FAQ:
http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
The GarageBand 6.0.5 update is here:
GarageBand 6.0.5
If you want to reinstall, install again the GaragaBand application from your installation disk and then upgrade again to 6.05 using the link above or Software update from the Apple Menu.
Regards
Léonie

How to view the change immediately after a java file is modified without restarting server or redeploy?

          Hi All,
          How to view the change immediately after a java file that is used in jsp is modified
          without restarting server or redeploy?
          Moreover, it is better to keep the original session.
          Any suggestion is appreciated.
          Kammau


          Hi,
          In order to have a new version of a java class, the current classloader must be
          deleted and a new one created. This is what redeployment does. I believe that
          this is more of an issue with Sun's implementation of classloaders. You could
          ask BEA support (719.232.7878) and see if they have any plans to periodically
          check jar files to see if java class file timestamps and destroy and re-create
          classloaders on the fly.
          1) You will still have to accept the performance hit of destroying classloaders
          and creating new ones. There isn't any way around that.
          2) I would think you would want to have more explicit control in production and
          integration anyway.
          You can redeploy applications from the command line (script) file not just the
          console.
          Hope this helps,
          pat
          "Kammau" <[email protected]> wrote:
          >
          >Hi All,
          >How to view the change immediately after a java file that is used in
          >jsp is modified
          >without restarting server or redeploy?
          >Moreover, it is better to keep the original session.
          >Any suggestion is appreciated.
          >
          >Kammau

With headphones plugged in, ipod changes songs after 2-3 seconds

ipod has been working fine until lately. when I plug the headphones in, it will change songs after about 2-3 seconds. Also, sometimes when you power down it will come back on all by itself. Any help would be great !!!!!!

OK, so here is my problem. I did originally download the Beta 10.10... Apparently I kept on getting betas and was running 10.10.2 (which today is still in beta).
I did downgrade to 10.10.1 (by clicking "Download" in the App Store).
Right after the downgrade everything with syncing works perfectly.
Cheers, hope this helps someone.

Desktop Icons Change Positions After Restart

Hi,
After I inadvertently synced my computer with another Mac computer my icons change position after restart. I was trying to sync another computer to mine.
I have tried the usual suggestions of taking out com.apple.finder.plist and com.apple.desktop.plist and letting the system create these new files but the problem still persists. I also checked the Finder > View > Show View Options and arrange by none is still selected.
Does anyone have a suggestion how I can fix this problem? Will I have to go back in time with Time Machine and restore my entire system to solve this?
I can't operate with the desktop icons changing positions like this.
Thanks,
Pacecom

Delete the hidden .DS_Store file associated with your Desktop folder. Launch the Terminal.app (in /Applications/Utilities/), copy & paste the following command into the window that pops up, hit the return key, quit the Terminal.app, OPTION-click and hold the Dock's Finder icon, and select Relaunch:
*rm ~/Desktop/".DS_Store"*
Now, set the Desktop as desired, log out and back in, and the Desktop should be as it was as you last set it.

Change IP after ISE CoA

Similar Messages

Maybe you are looking for