Change IP for server

Dear All,
When I change IP server, installed BW, then I log on Portal : Content Administration -> Web Dynpro, choose Maintain JCO Destinations, and I test BI_METADATA ... there's error:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=sapsrv GROUP=PUBLIC R3NAME=BWD MSSERV=sapmsBWD PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.81.23:sapgw00' not reached TIME Mon Oct 22 16:08:15 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2764 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 113 ERRNO TEXT No route to host COUNTER 12
Old IP: 192.168.81.23
New IP: 10.81.81.23
Thanks much,
Tâ

Dear Tân,
have you adapted your /etc/hosts file accordingly? You have to take special care for the /etc/hosts file on Linux when using SAP.
Thanks,
Hannes

Similar Messages

Changing IP for server, what's the process?

Hi all-
I have a Xserve running 10.5 Server. It is an XSAN metadata controller and Open Directory master. The powers that be decided to switch to a faster internet service, meaning we are losing the static IPs that the outside network is using. I'm wondering what the best way to switch over to the new network will be.
All the computers on the Fibre network have 2 NICs- currently one is on 216.87.x.x (outside), and the other is on 10.0.0.x (inside). The fibre network communicates over the inside, but the Open Directory communicates over the outside network.
The inside network will not be changing. We will be moving the outside network to a 10.1.10.x IP.
Since the clients use Open Directory via the outside network to login, what is the process to switch them over? I am assuming I switch over the server, and then the clients, correct? Then, I would log in using a local account, and add the new Open Directory server to Directory Utilities. Then, I should be able to log in to the Open Directory accounts.
Anything else I should be thinking of? Tips? Advice?
Thanks!

Very simple, export them as VCARDS then drag them into Address Book. Assuming your PC's mail program can export more than one at a time the whole process should take less than 10 minutes. We aren't PC people here so you need to look into the mail program you're using on it and look for the Export command. Almost surely it can export to VCARD. Once you have the VCARDS, open Address Book and drag them onto the Address Book and you're done.

Photoshop Elements 5.0 PC. Moved. How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures. Thanks

Photoshop Elements 5.0 PC. Moved. How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures. Thanks

You say you have the pse 5 disk?
I guess you do't have a dvd drive on your new windows 8 computer?
Do you have access to another computer with a dvd drive?
Anyway if you can find another computer with a dvd drive you could copy the pse 5 install disc to removable device like a camera card or flash drive.
You can also buy cheap usb dvd drives.

How to Change Analysis Services Server for Power View

I can't seem to figure out how to change what SSAS server/instance that is used to build the cubes for Power View items uploaded to SharePoint. I tried changed the trusted servers listed in the Excel Services service application but if I remove the original
SSAS server (which of course is a test server, not to be used for production) and have only the prod SSAS instance listed the reports fail to load with the generic 400 error. Is there another setting that I'm missing?
Thanks,
Kyle

Hi ,
Since this issue is related to SQL Server, I will move this thread to SQL Server forum. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

After change port for TCPIP PORT for default SQL Server instance (MSSQLSERVER), sql service and sql agent service did not started again

Hi
-when i install default instance MSSQLSERVER i added a domain account as a service account,
- when i change port for TCPIP PORT , and after sql service and sql agent service did not started again.
it thrown error
The SQL Server (MSSQLSERVER) service failed to start due to the following error:
The service did not start due to a logon failure.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
but when i add domain\sqservice account in administrators group these services started,
1) here why this change behavior happened
2i changed the port 1500
adil

HI
the sql instance service is running with domain/sqlservice account ,
- i stopped the sql service service
- when i start it not started again and i found below error message
Domain and account: MOJPORTAL\spsqlservice
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this.
If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed,
check with your domain administrator to find out if a Group Policy object associated with this node might be removing the right.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7041</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-04-24T17:12:58.326973300Z" />
<EventRecordID>2177</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="4044" />
<Channel>System</Channel>
<Computer>PORTALSQL1.mojportal.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">MSSQL$xSQL</Data>
<Data Name="param2">xxxL\spsqlservice</Data>
</EventData>
</Event>
adil

WebtopNaming - can not find server name for server ID

We have a LB, and web servers in front of OpenSSO app servers in our environment.
OpenSSO debug log CoreSystem fills up with lot of errors like these:
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
Any ideas about the root cause?
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Server IDs -> [03, 02, 01, 04, 05]
amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

Thank You for the response.
Here is my site configuration in OpenSSO:
There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
Servers:
http://host4.company.com:8080/openSSO
http://host5.company.com:8080/openSSO
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
Only one site with secure URLs is configured
Sites:
site1
Primary URL: https://opensso-qa.company.com:443/openSSO
Assigned Servers:
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
From the CoreSystem log, Server ID definitions are:
https://host4.company.com:8443/openSSO=01
https://host5.company.com:8443/openSSO=02
https://opensso-qa.company.com:443/openSSO=03
http://host4.company.com:8080/openSSO=04
http://host5.company.com:8080/openSSO=05
Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

Certificate for server is Invalid ??

Hi,
Never had a problem with my mail before, but suddenly seems to have completely screwed up. Every time i try to send something it says
Mail was unable to verify the identity of this server, which has a certificate issued to “______”. The error was:
The certficate for the server is invalid.
You might be connecting to a computer that is pretending to be “smtp.___.com”, and putting your confidential information at risk.
You can try to send using a different server. All messages will use this server until you quit or change your network settings.
I know nothings been changed on the server and I haven't changed anything in mail. It's still working fine on my other mac pro, which has exactly the same settings.
Any ideas? it really ***** not being able to send mail.
Many thanks & have a great day =)

Since the HeRtbleed flaw was announced last week, a number of sites have been patching the flaw and then revocting the certificates to prevent fraudulent sites from pretending to be them. They should then issue a new certificate when you login to the legitimate site. Try logging in again.
For your browser, delete your current cache, history and certificates...logging in to sites will take longer until you get new certificates but will clean things up.

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

How to change password for a user in WLS 7.0 embedded ldap in code?

I asked the similar question before but don't have an answer yet.
I need to change password for a user in my Java code. Any help will be
appreciated.
Here is my stack trace:
c:\Test>java -classpath . testEmbeddedLdap
attribute: uid
attribute: description
attribute: objectclass
attribute: wlsMemberOf
attribute: sn
attribute: cn
javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient
Access Rights]; remaining name
'uid=myRegularUser,ou=people,ou=myrealm,dc=mydomain'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:2872)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2810)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2616)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1374)
at
com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDir
Context.java:255)
at
com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(Partial
CompositeDirContext.java:172)
at
com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(Partial
CompositeDirContext.java:161)
at
javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.
java:146)
at testEmbeddedLdap.main(testEmbeddedLdap.java:30)
Here is my testing code:
<PRE>
import java.util.*;
import javax.naming.*;
import javax.naming.directory.*;
public class testEmbeddedLdap {
public static void main(String[] argv) {
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, "ldap://localhost:7001");
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL, "uid=myAdministrator, ou=people,
ou=myrealm, dc=mydomain");
env.put(Context.SECURITY_CREDENTIALS, "myAdministrator");
try {
DirContext ctx = new InitialDirContext(env);
String
sUser="uid=myRegularUser,ou=people,ou=myrealm,dc=mydomain";
String sOldPassword="myRegularUser";
String sNewPassword="newpassword";
for (NamingEnumeration ae = ctx.getAttributes(sUser).getAll();
ae.hasMore(); ) {
Attribute attr = (Attribute)ae.next();
System.out.println("attribute: " + attr.getID());
ModificationItem[] mods = new ModificationItem[2];
Attribute mod0 = new BasicAttribute("userpassword",
sOldPassword);
mods[0] = new ModificationItem(DirContext.REMOVE_ATTRIBUTE,
mod0);
Attribute mod1 = new BasicAttribute("userpassword",
sNewPassword);
mods[1] = new ModificationItem(DirContext.ADD_ATTRIBUTE, mod1);
ctx.modifyAttributes(sUser, mods);
ctx.close();
} catch (NamingException e) {
e.printStackTrace();
</PRE>
"Neil Smithline" <[email protected]> wrote in message
news:[email protected]...
Two things. First, I'm not exactly sure what password you are trying to
change. The LDAP server's password or a user's password in the LDAP
server. Second, could you please post a stack trace.
Thanks - Neil
K Wong wrote:
I am using (javax.naming.directory.DirContext.modifyAttributes) to
change
password to our development Weblogic 7.0 embedded LDAP.
I login as the system administrator (a user in the administratorsgroup),
but always gets the javax.naming.NoPermissionException - InsufficientAccess
Rights.
What user should I use? Any help will be appreciated.

Hai,
This condition based execution requires - javascript coding.
In miscelleaneous tools bar, you have an option of SCRIPT_ITEM writer tool, drag the tool into your WAD layout, and select the properties , choose the editor option and paste your coding. that's it.
Alternate option :
in your web application design layout , you will fine XHTML coding editor , there you need to write coding and execute the same.
Hope this will help to you.
Assign Points if its really useful.
Cheers !!!
Bye
Regards,
Giri

"could not save list changes to the server" while creating a new form in SharePoint Designer - custom content type

i am getting "could not save list changes to the server" while creating a new form in SharePoint Designer.
Actually the list was created with a custom content type. When i try to create a new form from the custom content type, it fails.
However, when i try to create a form using item content type, it creates a form successfully.
Could you please let me know hte workaroud for this.
Tnx

Hello,
This link may be help you to create custom form using content types:
http://blog.splibrarian.com/2011/03/21/using-content-types-to-modify-the-newform-aspx-and-editform-aspx-pages/
Hemendra:Yesterday is just a memory,Tomorrow we may never see Please remember to mark the replies as answers if they help and unmark them if they provide no help (On vacation from 16th Oct to 28th Oct 2014)

After changing 'MS SQL server' service's user name SDAC doesn't work properly

I've changed 'MS SQL Server' service user name
from .\admin (have had such already) to network_services
and now my oracle linked servers to Oracle instance stopped to work.
Namely, 'Cannot create an instance of OLE DB provider "OraOLEDB.Oracle" for linked server Ora_RO'.
In event log i see next:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{2206CDB0-19C1-11D1-89E0-00C04FD7A829}
and APPID
{2206CDB0-19C1-11D1-89E0-00C04FD7A829}
to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
So, MSDAINITIALIZE Class fails to start. I cannot locate this service under dcomcnfg. Could you help me?

The error seems to be clear what is causing the issue, check this link to fix this issue
Here the scenario is with SharePoint instead oracle so you can make out:-
http://www.wictorwilen.se/Post/Fix-the-SharePoint-DCOM-10016-error-on-Windows-Server-2008-R2.aspx
http://social.technet.microsoft.com/Forums/en-US/696204d5-b07e-46db-a785-737ea57b8da2/distributed-com-error-message
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

Can I change the smtp server with Yahoo push account?

My yahoo email account will send and receive over EDGE using the default yahoo mail settings. On my home Cox internet WiFi network I can retrieve messages but cannot send. When sending it says it was sent and makes the "swooshing" mail sent sound, but the message disappears. It does not appear in the "sent" folder or "drafts" folder either. No error message is returned.
I suspect this is related to Cox blocking the smtp server, but the iPhone does not allow me to change the smtp settings on the default yahoo account. Does anyone know how to do this? I can set it up manually for POP access, but then I'm flooded with spam.

No, you cannot change the SMTP server on the Yahoo push account.
Yahoo push only works if you configure your account using the Yahoo! Mail shortcut on the iPhone, and that shortcut does not allow for ANY customization.

Can't Change Labels for Properties

I Can't Change Labels for predefine Properties
or Custom Properties.
I had done it with this:
http://help.sap.com/saphelp_erp2004/helpdata/en/65/6fc63ed4027f6be10000000a114084/frameset.htm
I just followed what the help said.
but i can't see any change for my label of Properties.
I had done it as follow steps.Please help me to
Check if i miss some steps!
1,I creat .properties files
mylabels.properties
 in this properties file i creat a key
 modified=date
mylabels_zh_CN.properties
 in this properties file i creat a key
 modified=u66F4u65B0u65E5u671F
2,I made a jar file use the two .properties files
named mybunding.jar
3,I copy this jar file to
.../j2ee/cluster/server<n>/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.km.common.resourcebundle/lib
4, Create a new metadata extension under Content Management -> Global Services -> Property Metadata -> Metadata Extensions.
named it my_metadatae_extension
 set Bundle File=com.sap.km.common.resourcebundle.mybunding.mylabels
5,restart the servlet engine,
6 in the key for label of the properties
 i set modified the key i creat in step 1.
when i display the properties it still didn,t display
my created lable.
How should i do? any step i miss? or any better solution
for the lable?
Please help me ,
BestRegards
Han

Hi Han,
here my corrections:
1.
I would use the filename "mylabels_cn.properties" and not "mylabels_zh_CN.properties"
2.&3.
This is the SP2 way for using the bundle files for properties. For NetWeaver you need to create a new PAR-file with the bundle file including the labels and translations as described <a href="http://help.sap.com/saphelp_nw04/helpdata/en/65/6fc63ed4027f6be10000000a114084/frameset.htm">here</a>.
It's very easy if you use the example PAR file provided by SAP in SAP Note 817876, as mentioned in the referenced link (Prerequisites section).
Read carefully the process in the link and try again. If you still experience problems, come back with the new detailed description.
Hope this helps,
Robert

Netsh mbn for server 2012 R2 (Mobile Broadband)

Hi,
I cant find the mbn option in the windows 2012R2 server
is it disabled for server 2012R2? or there is some settings (services - dlls - other dependencies) so the mbn option will show up?below is the output of netsh /? command, plz help?
I have 2012 R2 essentials running on Dell T320 server,
C:\Windows\system32>netsh /?
Usage: netsh [-a AliasFile] [-c Context] [-r RemoteMachine] [-u [DomainName\]Use
rName] [-p Password | *]
 [Command | -f ScriptFile]
The following commands are available:
Commands in this context:
? - Displays a list of commands.
add - Adds a configuration entry to a list of entries.
advfirewall - Changes to the `netsh advfirewall' context.
branchcache - Changes to the `netsh branchcache' context.
bridge - Changes to the `netsh bridge' context.
delete - Deletes a configuration entry from a list of entries.
dhcpclient - Changes to the `netsh dhcpclient' context.
dnsclient - Changes to the `netsh dnsclient' context.
dump - Displays a configuration script.
exec - Runs a script file.
firewall - Changes to the `netsh firewall' context.
help - Displays a list of commands.
http - Changes to the `netsh http' context.
interface - Changes to the `netsh interface' context.
ipsec - Changes to the `netsh ipsec' context.
ipsecdosprotection - Changes to the `netsh ipsecdosprotection' context.
lan - Changes to the `netsh lan' context.
namespace - Changes to the `netsh namespace' context.
nap - Changes to the `netsh nap' context.
netio - Changes to the `netsh netio' context.
ras - Changes to the `netsh ras' context.
rpc - Changes to the `netsh rpc' context.
set - Updates configuration settings.
show - Displays information.
trace - Changes to the `netsh trace' context.
wcn - Changes to the `netsh wcn' context.
wfp - Changes to the `netsh wfp' context.
winhttp - Changes to the `netsh winhttp' context.
winsock - Changes to the `netsh winsock' context.
wlan - Changes to the `netsh wlan' context.
The following sub-contexts are available:
advfirewall branchcache bridge dhcpclient dnsclient firewall http interface ips
ec ipsecdosprotection lan namespace nap netio ras rpc trace wcn wfp winhttp wins
ock wlan
To view help for a command, type the command, followed by a space, and then
type ?.
C:\Windows\system32>ver
Microsoft Windows [Version 6.3.9600]
C:\Windows\system32>netsh
netsh>

Hi
I made some further research, the "netsh show helper" will show all the dlls that contribute to the netsh subcommands, i run this command on my windows 8 laptop as below
C:\Users\Sinan1>netsh show helper
Helper GUID DLL Filename Command
{02BC1F81-D927-4EC5-8CBC-8DD65E3E38E8} AUTHFWCFG.DLL advfirewall
{FB10CBCA-5430-46CE-B732-079B4E23BE24} AUTHFWCFG.DLL consec
{35342B49-83B4-4FCC-A90D-278533D5BEA2} AUTHFWCFG.DLL firewall
{4BD827F7-1E83-462D-B893-F33A80C5DE1D} AUTHFWCFG.DLL mainmode
{4D0FEFCB-8C3E-4CDE-B39B-325933727297} AUTHFWCFG.DLL monitor
{00770721-44EA-11D5-93BA-00B0D022DD1F} HNETMON.DLL bridge
{6DC31EC5-3583-4901-9E28-37C28113656A} DHCPCMONITOR.DLL dhcpclient
{8A6D23B3-0AF2-4101-BC6E-8114B325FE17} NETIOHLP.DLL dnsclient
{8B3A0D7F-1F30-4402-B753-C4B2C7607C97} FWCFG.DLL firewall
{44F3288B-DBFF-4B31-A86E-633F50D706B3} NSHHTTP.DLL http
{0705ECA1-7AAC-11D2-89DC-006008B0E5B9} IFMON.DLL interface
{1C151866-F35B-4780-8CD2-E1924E9F03E1} NETIOHLP.DLL 6to4
{97C192DB-A774-43E6-BE78-1FABD795EEAB} NETIOHLP.DLL httpstunnel
{725588AC-7A11-4220-A121-C92C915E8B73} NETIOHLP.DLL ipv4
{500F32FD-7064-476B-8FD6-2171EA46428F} NETIOHLP.DLL ipv6
{90E1CBE1-01D9-4174-BB4D-EB97F3F6150D} NETIOHLP.DLL 6to4
{90E1CBE1-01D9-4174-BB4D-EB97F3F6150D} NETIOHLP.DLL isatap
{1C151866-F35B-4780-8CD2-E1924E9F03E1} NETIOHLP.DLL isatap
{1C151866-F35B-4780-8CD2-E1924E9F03E1} NETIOHLP.DLL portproxy
{78197B47-2BEF-49CA-ACEB-D8816371BAA8} NETIOHLP.DLL tcp
{1C151866-F35B-4780-8CD2-E1924E9F03E1} NETIOHLP.DLL teredo
{F7E0BC27-BA6E-4145-A123-012F1922F3F1} NSHIPSEC.DLL ipsec
{F7E0BC29-BA6E-4145-A123-012F1922F3F1} NSHIPSEC.DLL dynamic
{F7E0BC28-BA6E-4145-A123-012F1922F3F1} NSHIPSEC.DLL static
{1D8240C7-48B9-47CC-9E40-4F7A0A390E71} DOT3CFG.DLL lan
{B572D5F3-E15B-4501-84F2-6626F762AFB1} WWANCFG.DLL mbn
{B341E8BA-13AA-4E08-8CF1-A6F2D8B0C229} NETIOHLP.DLL namespace
{00B399EA-447F-4B19-8393-F9D71D7760F9} NAPMONTR.DLL nap
{3F8A1180-FF5D-4B5B-934C-D08DFFBC9CBC} NAPMONTR.DLL client
{B123BAAA-79E9-49FD-AB2C-E87C56CE4CFF} NAPMONTR.DLL hra
{931852E2-597D-40B9-B927-55FFC81A6104} NETIOHLP.DLL netio
{B7BE4347-E851-4EEC-BC65-B0C0E87B86E3} P2PNETSH.DLL p2p
{E35A9D1F-61E8-4CF5-A46C-0F715A9303B8} P2PNETSH.DLL group
{9AA625FC-7E31-4679-B5B5-DFC67A3510AB} P2PNETSH.DLL database
{FBFC037E-D455-4B8D-80A5-B379002DBCAD} P2PNETSH.DLL idmgr
{9E0D63D6-4644-476B-9DAC-D64F96E01376} P2PNETSH.DLL pnrp
{1DD4935A-E587-4D16-AE27-14E40385AB12} P2PNETSH.DLL cloud
{AD1D76C9-434B-48E0-9D2C-31FA93D9635A} P2PNETSH.DLL diagnostics
{6EC05238-F6A3-4801-967A-5C9D6F6CAC50} P2PNETSH.DLL peer
{0705ECA2-7AAC-11D2-89DC-006008B0E5B9} RASMONTR.DLL ras
{42E3CC21-098C-11D3-8C4D-00104BCA495B} RASMONTR.DLL aaaa
{90FE6CFC-B6A2-463B-AA12-25E615EC3C66} RASMONTR.DLL diagnostics
{13D12A78-D0FB-11D2-9B76-00104BCA495B} RASMONTR.DLL ip
{36B3EF76-94C1-460F-BD6F-DF0178D90EAC} RASMONTR.DLL ipv6
{592852F7-5F6F-470B-9097-C5D33B612975} RPCNSH.DLL rpc
{C07E293F-9531-4426-8E5C-D7EBBA50F693} RPCNSH.DLL filter
{D3E9D893-852F-4E22-B05D-99293065773D} NETTRACE.DLL trace
{C100BECD-D33A-4A4B-BF23-BBEF4663D017} WCNNETSH.DLL wcn
{3BB6DA1D-AC0C-4972-AC05-B22F49DEA9B6} NSHWFP.DLL wfp
{0BFDC146-56A3-4311-A7D5-7D9953F8326E} WHHELPER.DLL winhttp
{B2C0EEF4-CCE5-4F55-934E-ABF60F3DCF56} WSHELPER.DLL winsock
{D424E730-1DB7-4287-8C9B-0774F5AD0576} WLANCFG.DLL wlan
As you see, the mbn command is added from the "WWANCFG.DLL" , there is a command "netsh add helper <dll name>"
I couldn't find the WWANCFG.dll on my windows server 2012 R2 box, how can I add/download/install/register this dll?
What are the dependencies of the WWANCFG.dll? are there any other dlls that need to e registered?
Thanks for your help
/sinan

Customizing changes in production server

hi experts,
In our organization we are implementing SAP, Production serevr still not using.our implementing team asking me(SAP admin) to allow changes in production server for uploading the master data of our company. But if i allow, they directly customizing the data in production server.Now my question is How i allow the users to uploading the data not for changes in production server by using scc4 tode.
please help me.if u want clarity ask me.
thanks and regards,
patan thavaheer.

I only working as BASIS Administrator,I am facing this issue. please suggest me.
thanks,
patan thavaheer.
customizing changes in production server

Change IP for server

Similar Messages

Maybe you are looking for