Change item category Display mode  in sales order (Third Party )

Hi all,
I am creating sales order with reference to sales contract but at the time of sales order we don't have enoff stock to deliver to customer , so we have deiced to Third party sales process
But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
Can any one guide me how sales order line item should be in active mode  so i can change the Item category as a TAS third party item category
Help me regards this
Thanks
Rajesh

Hi all.
Thanks for response
I maintain all configuration, But the problem is while creating Sales Order with reference to Contract
the Sales Order line item in grad Mode i am unable to change item category as TAS
i mean TAN is on Display Mode
and we are using Varient config  for that material
Please guide me where i need to Configure so system should allow me change item category in sales order please guide me
Thanks
Rajesh
Edited by: RAJESH KUMAR on Jun 16, 2009 10:23 PM

Similar Messages

  • Purchase order creation from sale order (Third party )

    Hii..
    I have a requirement where i create a sale order for third party, system automatically creates purchase requisition,
    my requirement is i dont want to  convert purchase requistion everytime into PO when ever sale order is created.
    can i automate the process where the moment i crete s sale order purchase order is created direclty.
    Suggestions will be worth rewarding..
    Regards
    SARFRAZ

    Hi
    first you need to do seeting for Automatic PO creation from PR
    1.You need to check the Auto POcheck box in Purchasing view of the material master
    2.You need check the Autoamic PO check box in Vendor master in Purchasing org data
    3.You need to maintai the source list with one of the vendor as fixed vendor
    4.Purchasing info record for Vendor and material
    Then you need to schedule the batch job for ME59N with the variant (Required input selection parameters) with the time intervals.
    One third party order created, PR will be generated automatically based on the item category defined in the sales order and source will be assigned in PR.Based o time interval schduled for batch job, the PRs will be automatically converted into PO.
    Regards
    Ramakrishna

  • Discount Condn Type changeable in Quotation and Display Mode in Sales Order

    Hi Friends,
    There is requirement of having a Discount Condition Type to be in Changeable mode in Quotation and must not be in Changeable mode in Sales Order. That no user is allowed to change the discount value in Sales Order and whatever maintained in QT must be applcable for Sales Order till billing.
    Would like to have functional possibilities. Guide me gurus.
    Surya.

    Hi
    Would you like your user who is making the sales order to view the pricing conditions or you would also like him to change certain conditions/values (Except for discount conditions) ?
    If the above is applicable then in my suggestion you should go in for a Transaction Variant wherein you can either completely hide or make the pricing conditions in display only.
    R/Sanjeev

  • Missing item category & material description in sales order screen

    Hi all,
    We have upgraded SAP from 4.6C to ECC 6.0 version. In the sales order screen (create, change & display mode) the item category & the material description cannot be seen at the item level in the ECC 6.0 version. The same appears in the 4.6C version. I have done the following checks:-
    1. There are no screen variants/ transaction variants/layout settings in both the versions
    2. The config settings for item category are intact in both the versions.
    3. In the item detail view i am able to see the item category.
    4. There is no change in the functionalty as i am able to save the order  & complete the Sales cycle upto billing in the ECC 6.0 version
    Any ideas as to what could be the problem & how to fix it.  Pl suggest as it needs to be fixed urgently.
    Regards,
    Ramesh Iyer

    Hi,
    Have you checked the table control setting,which is avialable in the sales order screen at extream right.In this check in administrator button if Those fields must are marked as invisible.
    Reward points if useful
    Regards,
    Amrish Purohit

  • Want to change item category at the time of order creation

    Hi Gurus,
    Client require to implement individual PO scenario.
    I was configured the same and working fine.
    I am facing problem at the time of item category determination.
    User using same material and order type and they are not ready to accept to create new order type.
    Now My order type is OR and item category group is NORM and right now system determine item category TAN.
    User not want to change manually at the time of order creation.
    I have specific condition on which i want to apply this logic.
    Now i want to determine TAB item category through some user exits or enhancement.
    Can anyone suggest exact in which user exit or enhancement i have to change.
    Thanks & Regards,
    Chirag

    1. Use TCode 0VVW for creating a Z Item Usage, say, ZPO1
    2. Do an item Cat determination in VOV4, as
    Sales Doc type
    Item Cat Group
    Usage
    Item Category
    OR -
    NORM -
    ZPO1 -
    TAB
    3. Maintain Customer Materials Info Record by using VD51.
    In item screen for Cust-Mat combination maintain Item usage
    Regards
    JP

  • Item category not changeable in sales order

    Hi
    I have a material where the item category is not changeable in the sales order after you have pressed 'enter' after the material number. It is a bundle material number, with a BOM (structure scope 'A') - does this mean that the item category is greyed out for change?
    It is causing a problem because to select the manual item category in item category assignment, you have to change it before you press enter (and when you do that it only gives you a full list of item categories rather than the ones you can select for the assignment table).
    Jon

    this is standard sap !
    the reason is that if you change something that has relations with other object then problems can raise.
    You cannot do anything for this but you can make a user exit at your own risk that 'opens' up the field:
    the exit looks like this:
    MV45AFZZ
    FORM userexit_field_modification.
      CASE screen-group2.
        WHEN 'LOO'.
          IF screen-name = YourItemCategory AND xvbup-gbsta = ' '.
            screen-input = 1.
            MODIFY SCREEN.
          ENDIF.
      ENDCASE.
    ENDFORM.                    "USEREXIT_FIELD_MODIFICATION
    ROberto

  • Packing items to display in the Sales Order & Delivery

    Hi Experts,
    My client does not have HUM in SAP. They manufacture equipments & sell it to their customers.
    So in the Sales Order only the Top level machine number is entered & not the components that
    was used to built it.
    For example, let me say that to build a machine it requires 1000 components & out of which 50 are the
    1st level components as sub-assembly.
    Now there is a requirement from the Shipping dept, to list down only the first level components (in this case only these 50 parts) in the Sales Order as F.O.C so that the delivery will also show those individual items followed by the Packing List.
    But the billing document has to show only the top level equipment & not these 1st level components.
    Please tell me the steps to meet this requirement.  Is Handling Unit required in delivery to meet this?
    Regards,
    Pri

    Hi,
    If I have not misunderstood, u have a component(comprising of several sub assemblies) and you want to bill only the main item and for the sub items the billing should not be displayed.
    Well in that case you have to create a BOM of materials with usage 5 (Sales & Distribution)
    Then in the material master maintain the item category as ERLA ie Header level pricing. Do not explode the BOM if you do not want to see the sub items (ie do not maintain the structure scope in the item category ie TAQ)
    Regards
    Mahesh
    Edited by: Mahesh V Sandbhor on Mar 24, 2010 6:13 AM

  • VA01 Item category display only for specific order type

    Hi,
    I have a requirement to deactivate(display only) item category field in VA01 table item for certain order type . I tried the user exit  MV45AFZZ(USEREXIT_FIELD_MODIFICATION). This is working only if the table item has a value. i.e I could able to enter an item category first and then enter the material and quantity.
    So please suggest any alternative how to make the item category field(VBAP-PSTYV) column display only for centrain order type.
    Regards
    Aromal R

    Hi,
    Create a Custom Authorization Object so that you can control it for certain users.  2. Write implicit enhancement spot in the include TCS MV45AF0T_TCTRL_U_ERF_AUFTRAG_I,
    FORM TCTRL_U_ERF_AUFTRAG_INIT
    AUTHORITY-CHECK OBJECT 'ZITMCAT'
              ID 'ACTVT' FIELD '02'.
    IF SY-SUBRC NE 0.
    *    DATA: WA_COLS LIKE LINE OF TCTRL_U_ERF_AUFTRAG-COLS.
    LOOP AT   TCTRL_U_ERF_AUFTRAG-COLS INTO WA_COLS.
       IF WA_COLS-SCREEN-NAME = 'VBAP-PSTYV'.
       WA_COLS-SCREEN-INPUT = 0.
       WA_COLS-SCREEN-OUTPUT = 1.
      MODIFY TCTRL_U_ERF_AUFTRAG-COLS FROM WA_COLS.
       ENDIF.
    ENDLOOP.
    ENDIF.
    Regards
    Aromal R

  • ITem category  error while creating sales order through

    Hi,
    I am trying to create a sales order through Bapi  and in between im getting the below error.
    ' Item category TAM is not defined for non material items'.
    Can anybody pls provide the solution for this.
    Thanks

    speak to your SD functional person.  The Error is pretty self explanatory; SAP is telling you that the item category for that order item is not permitted by your SD configuration.

  • Error when creating PO for sales order (third party)

    Hi All,
    I have been trying to create a new PO from a purchase requisition. This PR is a third party PR with Account assignment category S. Also it is sales order related.
    When I try to save the PO it gives me two errors as shown below :
    "No upate of sales order 30081586 from purchase order (error V4 115)"
    "System error (error in method PO_POST)"
    Has anyone come across such an error? Is this because of something wrong in sales order?
    Regards,
    V S

    Hi ,
    Check note 849480 .
    according to this note the cause is
    "You create a purchase order with reference to a purchase requisition (PReq) that was generated as a result of a third-party order or an individual customer order. If another purchase order with reference to this sales document is changed at the same time (in another window or by another user) and the first purchase order is saved in the meantime, the associated sales order item is not updated and a termination occurs with error message ME 816, "System error: (error in method po_post)".
    This is basically a program error .To solve this follow the correction instructions mentioned in note 849480.
    Regards,
    Anupam

  • Purchase order created from sale order ( third party)

    Hi...
    In third party sale, when sale order is created in SAP system will automatically creates Purchase requisition which can be converted into Purchase order,
    My requirement is i need to identify against which sale order the above purchase order is created, do this purchase order has any reference of sale order.
    Is there any way where i can track the purchase order number entered while cretion of sale order in the purchase order generated after creation of sales order.
    Suggestion will be worth rewarding.
    Regards
    SARFARZ

    Hi
    I think you are little bit confused.The PO number entered while creating the Sales order is nothing but the customer Purchase order.This we may receive in different forms.Hard copy or Mail etc.We will give this number as a reference in sales order.
    Where as for third party orders, depending on the schedule line category (SD), PR will be generated.This will PR will be converted in to PO.In PO item detail, you can find account assignment tab, where you can find the sales order number.
    If you want to link customer PO to the SAP PO, then you need to link the two tables.
    Regards
    Ramakrishna

  • Sales order third party

    Hi,
    In third party sales order pr is generated and then the PO is done using same PR afterwards some how user managed to delete the PR from sales order  schedule lines  now  the issue is i am not able to  see the PR  number in schedule lines .because of which the billing is not happening as the Sales order is incomplete. please lt me know what can be done on this.
    Regards,
    Rohit

    Normally system will not allow to delete the PR in schedule line once PO is created .Are you able to see PR and PO.If you are able to see these and sales order does not have PR then raise a note to sap .They will update the sales order for to allow system billing process.

  • Basic price unchangeble mode in Sales order

    Hi,
    We are creating the sales order with reference to contract.And we are also using the same pricing procedure in contract and sales order document.Now we want that basic price should be changeble mode in contract and unchangeble mode in sales order.
    We are using the differen item category in contract and sales order.Need your suggestion to resolve this issue.
    Regards
    Prabudh T

    One option is that in V/06, for your condition type, if you maintain D for the field Manual entries, neither in contract nor in sale order changes can be made.  This will work only if you have different pricing condition type for contract and sale order.
    If you have the same condition type for both, then the other option is to try with any of the following sale order user exits
    -  User exits in the program MV45AFZZ - USEREXIT_MOVE_FIELD_TO_VBAP
    -  User exits in the program MV45AFZB - USEREXIT_CHECK_VBAP
    thanks
    G. Lakshmipathi

  • Unable to Change Item Category in Sales order

    Hi all,
    I am creating sales order with reference to sales contract but at the time of sales order we don't have en off stock to deliver to customer , so we have deiced to Third party sales process
    But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
    Can any one guide me how sales order line item should be in active mode so i can change the Item category as a TAS third party item category
    Help me regards this
    Thanks
    Rajesh

    hi,
    You can  the item category field (VBAP-PSTYV)  editable , if item is configurable (item category TAC), then change item category to TAS.
    by using include  MV45AFZZ -  FORM USEREXIT_FIELD_MODIFICATION.
    when screen 4001 or 4003.
       IF VBAP-PSTYV = 'TAC'.
               SCREEN-INPUT = 0.
              MODIFY SCREEN.
            ENDIF.

  • Issue while changing Item Category during Sales Order Creation

    Hi,
    Requirement:
    Requirement is to change the item category of Sales Order item while creating the sales order.
    Rule is: If item category is IRAT then it should be changed to IRLN.
    For this, I am using the user exit "USEREXIT_SAVE_DOCUMENT_PREPARE" available in the include MV45AFZZ.
    Issue:
    Using the above mentioned exit, Item category is getting changed to the desired value in the created sales order BUT value of Billing Status (VBUP-FKSAA) which is supposed to get changed is blank.
    For example, Sales order is created from VA01 and item category is changed manually to the value mentioned above, then for the sales order created we have VBUP-FKSAA = 'A'. But when value of Item category is not changed manually and it is changed from the exit, then value of VBUP-FKSAA is blank.
    I have to find a solution which would change the value of Billing Status according to the change in the value of Item Category.
    Please suggest a relevant solution.
    Thanks a lot for responding.
    Abhinav.
    Edited by: Abhinav Jain on Apr 9, 2010 6:47 PM

    Hi Abhinav,
    I have a simmilar problem. In my case I am changing Reason of Rejection in the user-exit, but net value is not getting updated. Did you solve your problem? Any other way to change a field of a sales order item?
    Thanking you in advance,
    Nisha

Maybe you are looking for