Change Jabber Client language 10.6

Hi,
is it possible to change the client language to a different language then the windows os?
Windows: English
Client: Portuguese
I need change for same language of the operating system.
Regards,
Milton Stocco

Jaime,
I found in another post the information. We have to insert a row: UseLanguageID:1033 in bootstrap.properties file (location: C:\ProgramData\Cisco Systems\Cisco Jabber).
So it worked perfectly.
Thank you very much!

Similar Messages

  • Change Jabber Client language

    Hi,
    is it possible to change the client language to a different language then the windows os?
    Windows: German
    Client: English
    With installing Jabber "/i <msi> LANGUAGE=1033" it does not work.
    Cheers
    Thorsten

    Hi Thorsten and Alberto,
    Yes, it is possible to change the client language in the following way: You should run command prompt as administrator (Right click on cmd\Run as administrator) and type: msiexec /i CiscoJabberSetup.msi LANGUAGE=1033 /quiet.
    You can also change language when jabber is already installed. Edit jabber-bootstrap.properties file (location: C:\ProgramData\Cisco Systems\Cisco Jabber) and type UseLanguageID:1033.
    Regards,
    Suzana

  • Jabber Client softphone is "No Connected"

    Hi,
    I am trying to setup a lab for cisco partner testing. I created Collab 10.5 topology with cucm & cups 10.5. I am running out of ideas of what could be wrong. My jabber client for windows works with deskphone but it does not work with it's softphone (CSFXXXXX). Yes, i have CCMCIP profile created, user & device associated but still does not work both within lab network or external network
    I am seeing the error below when I do a show connection status for the softphone - see attachment
    Connection error. Ensure the server information in the Phone Services tab on the Options window is correct.
    I do not have the "Phone Accounts" under options. I even uploaded jabber-config.xml file to tftp server and still no phone accounts tab. I can ping the cti hostname & ip from the pc i am working.
    SOS
    TIA
    Jeya

    Actually, I read it on a thread in this community. I just went thru’ the deployment guide and I saw that section too.   I have uploaded it to the tftp server and no change for the phone tabs. Only the Directory service becomes online after uploading that file but no change on the phone account tabs. Below is the contents of  the jabber-config.xml file that I generated using the file generator tool:
    <?xml version="1.0" encoding="utf-8"?>
    <config version="1.0">
     <Options>
       <StartCallWithVideo>false</StartCallWithVideo>
       <Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
     </Options>
     <Phone>
       <TftpServer1>hq-cucm-pub.abc.inc</TftpServer1>
       <CtiServer1>hq-cucm-pub.abc.inc</CtiServer1>
       <CcmcipServer1>hq-cucm-pub.abc.inc</CcmcipServer1>
     </Phone>
     <Policies>
       <EnableSIPURIDialling>true</EnableSIPURIDialling>
       <DirectoryURI>mail</DirectoryURI>
       <ServicesDomainSsoEmailPrompt>OFF</ServicesDomainSsoEmailPrompt>
     </Policies>
     <Presence>
       <PresenceServerAddress>hq-cups.abc.inc</PresenceServerAddress>
     </Presence>
     <Directory>
       <ConnectionType>1</ConnectionType>
       <PrimaryServerName>directory.abc.inc</PrimaryServerName>
       <BDIPrimaryServerName>directory.abc.inc</BDIPrimaryServerName>
       <ServerPort1>389</ServerPort1>
       <BDIServerPort1>389</BDIServerPort1>
       <UseWindowsCredentials>0</UseWindowsCredentials>
       <ConnectionUsername>Administrator</ConnectionUsername>
       <BDIConnectionUsername>Administrator</BDIConnectionUsername>
       <ConnectionPassword>1vtG@lw@y</ConnectionPassword>
       <BDIConnectionPassword>1vtG@lw@y</BDIConnectionPassword>
     </Directory>
    </config>
    Thks!
    Jeya

  • AOL Contact in Jabber Client

    Has anyone been able to successfully set up an AOL Contact on their Jabber client?
    I'm using Jabber 8.6.4 for Mac and whenever I specify my wife's AIM account name and select the checkbox for "This is an AOL account", then click the "Add" button, I get no feedback from the application on whether it failed or succeeded. She reports not receiving an invitation request to her account.
    Are AIM and AOL Contacts different things? Is there something else that needs to be setup? Is this feature not working yet in 8.6.4?
    DB

    The ability to add users who are not AD users is coming in Jabber 9.1. The tentative release date for this is Sept but that is subject to change.
    - Colin

  • Cisco Jabber client to support Multiple e-mail domains

    Hi All,
    Per the following link, CUCM an IM&Presence starts supporting multiple domains at version 10:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_0_1/delta/CUCM_BK_C206A718_00_cucm-new-and-changed-1001/CUCM_BK_C206A718_00_cucm-new-and-changed-1001_chapter_010.html#CUCM_RF_I31EA3AB_00
    However, we have heard from Cisco that there is NO Jabber client that works with version 10 to support multiple email domains.
    This may or not may be true.
    Can someone who has connection with BU confirm this? If there is Jabber client that supports multiple email domains, what is the version and when is it going to be available?
    Thanks,
    Mustafa

    Per-Olov
    How are you dealing with this DA restriction?
    Also, what are your comments about the use of Domain Alias vs. Domain with inetdomainbaseDN pointing to my organization? Which one was your choice?
    Thanks,
    Ivo

  • IPhone Jabber client not showing internal extensions just the Alerting Name

    I have customer calling from a 7965 to his desk phone 7965 which shows both Alerting Name and Extension, he also has an iPhone/Jabber Client on WiFi (no cellular involved). The iPhone client shows the Alerting Name from the 7965 but doesn’t show the 4 digit internal extension. Is this a known issue?

    Dear Miro,
    The issue has nothing to do with the server it's the client, Lync 2013 issue with caching data and the way its reading it back from the cache.
    Work around:
    just create a new client policy using the command new-csclientpolicy with AddressBookAvailability  "WebSearch" only.
    "New-CsClientPolicy -Identity TestCsPolicy -AddressBookAvailability WebSearchOnly"
    assign the policy to your test client, delete cache folder at the client end.
    "Grant-CsClientPolicy -Identity MIRO -PolicyNameTestCsPolicy"
    "you can delete sign-in information by signing out and clicking on "delete sign-in info" then sing-in again"
    test again. it should work.
    if it didn't open contact card and check if the the client is getting the data correctly.
    yet i didn't find another fix to the issue with lync 2010 client everything works just fine without any changes.
    Regards,
    Nader Barakat

  • Jabber client status on call / meeting

    hi
    i have configured jabber clients for mac 8.6.5 and windows 9.1 with our new cups 8.6.4 server
    i have enabled calendar integration and this is working really well
    too  well :-)
    if i have a meeting from 2-3pm my status changes to "in a meeting" but when i pick up the deskphone the status remains in a meeting rather than on a call. if my calendar has no meetings and i pick up the phone it changes the status to on a call.
    this is slightly annoying as you often have scheduled meetings (by phone) for 1 hour but are actually only in the meeting for 45 mins, so if the phone status (on a call) could over ride the calendar status that would be better imho. as people may  think you are still attending this meeting but you are actually available, nobody will edit their meeting if it finished early
    or is this something that can be configured, i guess i can turn off the calendar integration but it does have its merits so would rather not do so
    many thanks

    Unfortunately the user is still having the status update issue after isntalling the 9.0.5 release.
    When the user with this issue is unable to answer her extension, we then have it setup so that others in her department can see the call and answer her extension.  Is it possible that this might be why the status is still showing she is on a call when she isn't? 
    It appears the setup explained above is not the problems.  Other users are now reporting the incorrect status in 9.0.5 as well.

  • Jabber Client chat box input Chinese

    Hi all,
         I'm facing a problem with my Jabber client for Windows 8.1, the problem is that I can not input chinese in my chat box, but can use in other field like search or change Nick name.
         I have try to reinstall the Jabber client, or upgrade the Jabber Client from 9.2 to 9.6, but the problem still not fixed, and I test this two version on Windows 7, there's no problem like on Windows 8.1.
         BTW, I can copy the Chinese code from Notepad or other place, it can shown in chat box and can send it successfully.
         Is there anybody know why and how to resolve it?
    1. When I type somting in search field, it can show the chinese.
    2.In chat box, I try to input something but there is noting display

    Hi all,
         Anybody know about this problem?

  • Can jabber client connect to external other telepresence devices?

    Hi. I have some questions about jabber environment and jabber client.
    1. When I want to use jabber on Mobile, I know it would be needed Anyconnect VPN feature of ASA.
        But, if CUCM and CUP have public IP address:ignoring security issues for test,
        Can Mobile(using celular network) device use jabber application without VPN, TURN, STUN or ICE Server?
    2. I heard CUCM interwork with VCS-Control through SIP Trunk, VCS-Control deliver data to VCS-Expressway for Exteran connection.
        If then, Can internal Jabber Desktop user call to External teleprsence deivce such as HDX8000 of Polycom?
    3. I know Jabber Mobile clients do not support video presence yet, except for I-PAD.
        So, when does Jabber client support video presence feature? I think I have waited enough.
    thank you for inconvenience reading, because of none-mother language.

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

  • Directory Caching issue with Cisco Jabber client for Windows

    Hi ,
    I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
    Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
    Is there any automated way to remove the cache file? 
    Here is the detail of CUCM,Presence and Jabber.
    CUCM version: 9.1.x
    Presence          : 9.1.X
    Jabber              : 10.5 and 10.6

    Hello
    On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
    Network Device Enrollment Service.
    Our certificate for the CUPS were generated on this Certification Authority too.
    I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
    Enterprise Trust store for the users.
    But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
    I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
    Our partner left us alone with that unfortunately.
    Florent
    EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

  • Cisco Jabber client not displaying Contact Photos

    Hi All,
    We have configured an external webserver to store our contact photos. But I couldn't get it working on Jabber windows clients. It works for CUPC8.5. I run the wireshark on webserver and can't see any request from Jabber client. xml file is -
    <?xml version="1.0" encoding="utf-8"?>
    <config version="1.0">
    <Directory>
      <DirectoryServerType>EDI</DirectoryServerType>
       <PhotoUriSubsitutionEnabled>true</PhotoUriSubsitutionEnabled>
      <PhotoUriSubstitutionToken>sAMAccountName</PhotoUriSubstitutionToken>
      <PhotoUriWithToken>http://webserveraddress/people/sAMAccountName.jpg</PhotoUriWithToken>
    </Directory>
    <CUCM>
      <PhoneService_UseCredentialsFrom>presence</PhoneService_UseCredentialsFrom>
    </CUCM>
    </config>
    Can someone please advise what's the issue.

    Hey  Abhi,
    In the PRT, I see the following:
    2012-05-28 09:02:16,733 DEBUG [0x00001654] [s\feature-libs\config\src\Config.cpp(74)] [csf.unified.config] [Config::getValue] - result [true] key [PhotoUriWithToken] value [http:///people/adack.jpg]
    I understand that you changed the parameter to see if we can even pull a single image for anyone, however, what I see next is:
    2012-05-28 09:02:16,733 DEBUG [0x00001654] [rdsource\ADPersonRecordSourceLog.cpp(50)] [csf.person.adsource] [WriteLogMessage] - Configuration::SetConfigurationParameter - setting configuration parameter [PhotoSource] to [adack] //This needs to be AD Parameter which I see you used earlier
    2012-05-28 09:02:16,733 DEBUG [0x00001654] [rdsource\ADPersonRecordSourceLog.cpp(50)] [csf.person.adsource] [WriteLogMessage] - Configuration::SetConfigurationParameter - setting configuration parameter [PhotoUriWithToken] to [http://pho/people/adack.jpg]
    Do you know where this url is coming from?
    I suggest that based on Jason's input and as well as changing the parameter back to the one we want, lets follow this action plan:
    1) Exit out of Jabber and delete the files from the following location:
    C:\Documents and Settings\\Local Settings\Application Data\Cisco\Unified Communications\Jabber\CSF\Logs
    2 ) Modify the Jabber-Config.xml
    Change the Directory Section of the Jabber-Config.xml to the following
      EDI
      True
      sAMAccountName
      http://sptde.racq.com.au/people/sAMAccountName.jpg
    3) Re-login and then Generate the PRT by Help -> Report Error
    Keep in mind if the jabber-config.xml is uploaded on Call Manager, it'll replace any local modification, so we have to update the file on Call Manager .
    Once we have the new PRT with the Config provided above, I can work on that.
    Regards,
    Jasmeet

  • Smartforms : CHanges in one language are not reflecting in other languages.

    Hi
    I did some changes to the smartforms in language en and was trying to see the effect in other client in language de. But dont see any changes in other language.
    Changes that i did were, Changing the text in the forms, addition of new fields, set some conditions to text.
    Hope the problem is clear.
    Please help.

    After doing changes in the German Form in transaction SE63, the changes do not reflect in English language after activating the german form.Please help me with your valuable suggestion to solve this problem.
    Regards
    Ankur Godre

  • Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

    Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?

    In Jabber for Windows 10.6, you can change the ring tones.

  • Change NetConnection.client

    Hi all,
    I'm working on a project in which i use OSMF (2.0). I have a problem: I need to change the client for NetConnection, because the server calls a method when is connected. I figure it out, I wrote that method in the NetClient class, but I don't want to use it like this. I get the client from NetConnection, using NetConnectionFactory -> NetLoader -> StreamingURLResource, but it's to late than (when NetConnectionFactoryEvent.CREATION_COMPLETE dispatches).
    So can somebody points me a solution to this issue?
    Thank you,
    Tibi

    Jaime,
    I found in another post the information. We have to insert a row: UseLanguageID:1033 in bootstrap.properties file (location: C:\ProgramData\Cisco Systems\Cisco Jabber).
    So it worked perfectly.
    Thank you very much!

  • Softphone feature for Cisco Jabber Client

    Hello everyone,
    I have a CUCM cluster v.8.6.2 and a CUPS v.8.6.4. I've installed my full CUWL licenses as well as my CUP Licenses AND the Jabber for Everyone COP file. I've managed to install Jabber on Mac and on Windows and have all the features such as Chat, Desktop phone integration and Visual Voicemail with Cisco Unity Connection working as well. The only feature I'm having a huge hassle getting to work is the Softphone feature. I've tried adding a CUPC device with the user (btw everything is integrated and uses LDAP for authentication) as the digest account for it as well as the Owner ID. I've tried adding a CSF device as well (I remember reading it somewhere) but the Jabber client never discovers a Softphone device and all of the options on the client are grayed out for me to put in the device settings. I thought I saw it once looking for a device name CSFACILLI (ACILLI being my username) in the System Diagnostics for the Jabber for Mac client but now it just shows:
       Soft Phone Server
    Server Address:           cucm02.mycompany.net
    Server Port:                     2748
    Server Protocol:           --
    Device:                               --
    Line ID:                               --
    Status:                               Disconnected
    Any help or thoughts on this would be greatly appreciated! Thanks!
    Tony

    Aaron,
    Here's the bit I found interesting from the reporting function:
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::downloadConfig -- begin:
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::getCnfFile -- begin: , strDeviceName.c_str()=CSFacill, bHttp=FALSE
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CTFTPClient::Get -- begin: , remotefile=CTLFile.tlv, host=cucm02.mycompany.net, bIsAsyMode=TRUE, port=69
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -  TFTP_Error Select error
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -  TFTP_Error Can't get packet, retrycount=3
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -   CTFTPClient::ContinueGet -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CTFTPClient::Get -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -  CTFTPClient::ReceiveData -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::getCnfFile -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::downloadConfig -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CPhone::setPhoneMode -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xb030b000] -  CTFTPClient::ReceiveData -- begin: , nCookie=5, bIsAsyMode=TRUE
    It looks like it's trying to get CTLFile.tlv from my TFTP servers (which are my subscribers). I went under TFTP File Management under OS Administration on the Subscribers and no such file exists. Is this something I have to download from Cisco? It does look like it's trying for the correct device, just can't get the Configuration File it needs... Your thoughts?
    Thanks,
    Tony

Maybe you are looking for