Change Justification Defaults

The defaults that InDesign uses for justification produce pretty poorly spaced paragraphs (not allowing for any letter spacing, using fairly broad word spacing parameters, etc.).
- How do you change the justification settings so that they stick for all new documents and uses?
- Are there any standards that people prefer to use for this that they would like to share?
THANKS!

WITH NO DOCUMENT OPEN, edit the setting in the Paragraph Styles palette for either the default paragraph style, or on new styles that you set.
Quit InDesign to save these (and any other settings such as fonts, colors, views, etc.) to your InDesign preferences. On restart, you should see your new settings in place.
I, for example, prefer not to have the Red, Green, Blue, Cyan, Yellow, and Magenta swatches in my documents by default. I do prefer a 50% tint of Black. So, I've deleted those swatches I do not want and added the swatch I do. Now, every document created has Registration, None, Paper, Black and Black 50% in the list of swatches.
HTH
-mt

Similar Messages

Power view in SharePoint - Changing the default save location?

Is it possible to change the default location when saving Power view back into SharePoint?
Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
When saving their reports, the default location is always the same location where the data source is. This is described here also:
https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
Quote from the link: "The first time you save the
report, the default location will be the folder where the model is located."
Ok, understood. But is it possible to change this???

Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Office 2013 - Is there a way to when installing that you can change the default save location without having to configure it within the client?

So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!

You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do I change my default printer to print in grayscale?

How do I change my default printer to print in grayscale using a MacBook Air? I have gone to "system preferences" and "printers & scanners." However, there is absolutely no option to change the print color scale. I see that option when I go to a document & print, but I don't want to go through the hassle of changing to "gray scale" every time I print. Thanks so much in advance!!

Hi,What operating system you are using? What application you are printing from?

How do you change the default save as directory when saving a PDF file to your hard drive?

This is the on-line help instructions on this site:
Downloading a PDF file to your hard drive
You can download a PDF file to the hard drive from a web page's link. Downloading PDF files doesn't require the ActiveX plug-in file to be installed. (If you want to open and view the PDF file after downloading it, you must have Acrobat, Adobe Reader, or Acrobat Reader installed.)
To download a PDF file from a link:
1. Right-click the link to a PDF file, and then choose Save Target As from the pop-up menu.
2. In the Save As dialog box, select a location on your hard drive, and then click Save.
My issue: I want to save several pdf files (from the Adobe Reader in my browser) one at a time and each time it defaults the save as directory to the desktop and I have to go looking for the directory I last saved a pdf file in. I got lots of directories and I wish I could change the default setting for the save as directory. Just a minor thing but irritating as other programs usually will allow you to switch the default save as directory to one of your choosing.

There is not a way to set the default location from all the forums i searched in the last couple days.
Russ

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

When I change the default folder to save downloads in the options menu, it later reverts to the default folder even though I have made not changes in options. Any ideas? thanks!

In the Options menu I changed the default download location (folder) to a folder I have on my desktop and saved the changes. But this option reverts to the default folder when I turn on my computer and open FF the next day.

Thank you for your response.
I do use CCleaner and just ran it. It did not change the download option folder that I had changed from the default so it appears that this is not cause.
Any other suggestions would be appreciated. Thanks again!

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

http://support.apple.com/kb/ht5621

How do you change the default font in Illustrator CS5?

I have upgraded my Illustrator to CS5 and my default font has changed to a strange font. In Photoshop and InDesign, I was told that all you have to do is change the font in the Character menu to the font that you wish to be set as "default" and it will be the font that you always start with.
NOTE: Does this mean that if I use a different font in a different document, the font will stay that font unless I change it back? Isn't there a way to make a particular font the font that I would always what I start with? All this setup means, is that the "default font" will always be whatever the last font that was being used was. There has to be a way to make a default font that I will always start with no matter what the last font that was being used was.
Illustrator gives you no option on font type, unless a file is open. Then, if you change the font and close the file, next time you start a file, it will go back to what is was to begin with. There has to be a way to change the default font for all of these programs to where the font always stays the same unless you change it. Mine is just set to use a weird font that I would probably never use.
I just never thought it would be that big of a deal to change default settings for the font.

Okay, I basically made three different documents and I made sure that I had everything chosen in each. I then saved the three to that file and they now appear in the list:
Settings for all 3:
72psi, 150psi and 300psi
Rulers Visable
Times New Roman
12pt
14.4pt
I then went in and started three new documents. I used the three different New Document Profile's that I made and they all had Rulers, their sizes were correct, but the font stayed Myriad Pro. Did I miss anything? And, Yes, I did change the font and the setting before I saved them in the New Document Profile.
One other thing, I did create a file in the folder, but it was spelled incorrectly. I then went into the folder, erased it and made a second. Then, I went to open it in IllustratorCS5 and it was still listed. I went to the file and it wasn't there anymore, but it was still listed in the New Document Profile. Is there a way to get it off of the list or is all I have to do is restart Illustrator?

How do I change the default certificate in Java Web Console?

I have a 3rd party issued server keystore & truststore ready to go in both jks and p12 file formats. I wish to use this in the Sun Java Web Console instead of the self signed certificate. I cannot find any documentation as to changing the certificate. I did find commands to change the keystore and truststore passwords, but I want to change the entire certificate.
I tried manually messing with the /var/webconsole/domains/console/conf/server.xml configuration file but realized it was more complex than that. Is there a documented procedure for changing the default certifcate?
Thanks

Siri will use the default calendar specified in the Mail, Contacts, Calendars setting.
Go to Settings/Mail,Contacts,Calendars, then scroll down, and change the default in the Calendars section to your the one you prefer.
hope this helps.

How do you change the default font in indesign cs3 on a mac?

Hi, I have tried closing all indesign docs and then changing the font in the font menu to helvetica (from times), then opening a new document and it still gives me [Times (TT)] when i draw a new text box and write something in it.
I have tried quitting indesign and reopening it and its still the old default font of [Times (TT)] - which is also not an available font on my machine.
I have also changed my basic paragraph style to helvetica from times, and it still doesnt change the default font when i open a new document.
When i open a new document in indesign it comes up with helvetica in the character pallet as the font, its just when i go to draw a text box and write something in it that it writes it in Times.

Is it possible you have more than one text frame object style, or that you have some default paragraph style set other than [Basic Paragraph]? If you are only editing Basic Paragraph and your default text frame is set to another syle, or you have another paragraph style selected when you begin typing, you might see this behavior.
If not, try resetting your preferences. Replacing InDesign Preferences

Changing the Default Currency in Analytics App's don't change curr symbol

Hi All,
We are using BI APPS 7.9.4 with OBIEE 10.1.3.3.2
We want to change the default currency for reporting from $ to £ in BI Dashboard reports.
I have edited the currencies.xml file on $INSTALLDIR/OracleBI/web/config
changed the sybmol to £ from $
<Currency tag="int:wrhs" type="international" placeholder="true" symbol="£" format="$#" digits="2" displayMessage="kmsgCurrencySiebelWarehouse">
<negative tag="minus" format="-$#" />
</Currency>
<Currency tag="loc:en-GB" type="local" symbol="£" locale="en-GB" format="$#" digits="2">
<negative tag="minus" format="-$#" />
</Currency>
and restarted BI Server, Presentation Server, Java Host and all the OPMN services but the reporting currencies in the dashboard reports are still displayed in $. The report currency symbol is showing $ by default irrespective of the default currency set in the currencies.xml
Ex: $13459
Anyone know what this issue could be, please let me know if am missing anything.
I appreciate your help.
Rgds, Bhaskar Kolluru
Edited by: bkolluru on 30-Sep-2008 03:14

Did you try changing the format setting as well?
format="£#"

How to Change a Default Value from Drop Down Box displayed in Web Dynpro?

Hi,
How to Change a Default Value from 'High' to 'Low' in a Drop Down Box for RANGE field displayed in Standard Web Dynpro Component. I saw a Default Value set for a RANGE field in View Context When I select that field and click on Display. I am seeing Default Value set it to 'HI'. Please let me know how to change from HIgh to Low.
I appreciate your help!
Thanks,
Monica

hi,
use the set_attribute( ) method now to set the attribute with a particular key eg HIGH in ur case
// u can use the code wizard( control +f7) this code will be auto generated when u select the
//radio button to read the context node
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
DATA ls_cn_node TYPE wd_this->element_cn_node.
* navigate from <CONTEXT> to <CN_NODE> via lead selection
lo_nd_cn_node = wd_context->get_child_node( name = wd_this->wdctx_cn_node ).
* get element via lead selection
lo_el_cn_node = lo_nd_cn_node->get_element( ).
* set single attribute
lo_el_cn_node->set_attribute(
name = `ATTribute name.`
value = 'LOW' ).
it will solve ur query ..
also refer to this component
wdr_test_events -> view dropdownbyidx and dropdownbykey ->method name onactionselect.
regards,
amit

How to change the default Path of Prompt Played by MicroApp

Hi
I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
Please advice how we can customize the MicroApp Media path.
regards
Kapil Kumar

Hi Kapil,
Try this in your ICM script, define set variables i.e.
set Media Server= ip address of media server
set Locale = en-us
set input Type = DTMF only
set App Media Lib = " you new location i.e. test "
So, the application path will be
http://media server ip address/en-us/test
hope this helps.
Cheers

How to change the default SSH port on Cat 6500 WS-SUP720-3B

I have been net searching this question and I find answers relative to other Cisco products but not for the 6500 series. We are running
entservicesk9_wan-mz.122-18.SXF17a.bin and would like to know how to change the default SSH listening port..
Thanks in advance..

Hi Neil,
Normally this is achieved via the "ip ssh port rotary " but unfortunately, this command is not implemented on your platform so ssh will only work on port 22.
Regards,
Nicolas

Change Justification Defaults

Similar Messages

Maybe you are looking for