Change Key Figure Value based on Characteristics
Hi,
I have a report where based on characteristics value I have to change the value of the key figure either to + (Positive) or -(Negative).
Is it possible through virtual keyfigure?
Can anyone give me details of the same.
If anybody can send me complex reporting document, please send it to
[email protected]
Thanks,
Moon
Hi.. Do u want to implement this only in the report or store the sign back into the cube ?
If u just want to use the value of the masterdata as a key figure for calculation (i.e. u can read the value of the masterdata or attribute and write a formula variable that uses this value and returns a sign), use a formula variable with replacement path and u've got ur results.. in case u want to store this in the cube, the transformations would help..
let me know if this helps and it would help further if u explain the exact scenario...
Cheers,
- Aditya
Similar Messages
-
Key Figure values based on characteristic Drill-downs
Hello All,
I have Issue with my drilldown options in the report. The values of Sales qty need to change at particular drilldown.
I have Sales Revenue and Sales QTY key figures in my DSO with plant, factory, customer and Business type (Values A, B, C and D) characteristics.
IN the report requirement I want to show the SALES QTY for only Business Type "A" at Plant , factory and customer level, but when I am at the Business code level, then I am to show all the quantities by that level.
THe sales revenue should always show values for all Business code irrespective of the drilldowns.
please provide suggestions and code on how to go about the issue.
thanks,
pra.Hello Guys,
Thanks for your response.
Let me explain clearly...with an example.
We have DSO which has 5 chars and 2 KFs.
Chars - Company Code, Plant, Customer, Material and Business Code (which has values A, B and T).
KFs - Sales Qty and Sales Revenue.
Report output ---
Customer
Company Code
Plant
Material
Business Code
Sales Qty and Sales Rev
Requirement is a follows -
When the report is run.... the report will display on Customer with KFs.
then if user wants to pull company code he can do so...as will other chars (Plant, Material and Business Code)
but the condition is that when the user is seeing the report at customer with KFs ,....the KFs should only show values where business code = "A"
so is the same with other chars - Company code, Plant and Material.
But when user drags and drops the Business Code char in the report against the KFs .then the report should include all Business Codes ( A, B and T) with corresponding sales qty and sales rev for all business codes.
Solution - Partially working--
What I have done..is restricted the sales qty and rev with Business code = A, its working fine for all drill downs except that, when I am at business code level its showing as
Business Code QTY REV
A 300 3000
B 0 00
T 0 00 .
Hope you got the issue. Please let me ,,if you need any information.
Thanks,
Pra -
Key figure value based on user input.
Dear Friends,
We are using BI7.00 and NW2004S. In one of our report to monitor the number of notification closed and the number of notification open upto the user selected month. For this i have created a Query which has selection screen value as month. I have created a condition which will fetch the difference in days (notification completion - notification creation date) based on user entered value. For example if user enters 10 in the selection screen, report will fetch the notifications which have diffrence in days as 10.
The condition is okay for the above. What user actually wants is the number of notifications completed and that pending based on the value he enters in the screen. For example he enters 10 in the screen, system should show the values as shown below
> 10 days
Completed Pending
3 2
I tried various options but could not achieve this.
Experts help expected. Kindly provide solution.
Regards,
M.MHi,
As per my understanding 1 firstly u have to find out
the no of days (diff between dates notification completion, notification creation date .)
then u have to create condition on no of days which u
have find.there u have to create one user entry
variable for the user can enter his own parametrs.
Right?????
If It is right..
here are the steps..
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP -
Changing key figure values in DSO/Cube
Experts,
I have a DSO and a Cube and the data has been already loaded in to a amount Key Figure. By default it is 2 decimal places. I want to change the decimals to 7. I cannot delete data from the cube or the DSO.
Can you please suggest some ideas to do this.
I came accross this note 579342 which talks about realigning this but as I have not implemented this before, I wanted to get your thoughts on if this is safe to do.
Thanks
Yashu rajHi Yashu,
I did this with using system message board and I put message on EP tooo.
So you do a small R&D. Run this report and let me know too if amount data is reflecting in the cube or not.
Logically it should not but have a try?
Regards,
Mahesh -
Hi is it possible to identify which key figures values has introduce a user ? and which CVC has the user uses for inserting the key figure value?
REgards.
PS :We have APO DP 5.0Javier,
It is possible to identify and track the inputs of specific users contribution to that Key figure using the following method, Provided you follow certain prerequisites first.
Its should be known before the certain people are responsible for certain data selections, like if there is a change in certain Sales org, we should ideally know who is the assinged planner to that Sales Org. or that sales org has been assinged to which Planner
Next, Develop to Lag reports in BI using the regular snapshots of the the data extracted out of DP before and after the changes have been made for that particular KF.
Compare the changes using the versions of snapshot before changes and after changes, or perhaps create another calucalted KF showing the different between two versions. The BI team should be able to create reports that enable you to run this report on all levels for that Key figure.
Hari V -
Key Figure value in Cube showing with extra zeros
Loaded data into the cube. When I display the result
Key figure values are showing with 2 extra zeroes and Quantity value shaowing with 3 extra zeroes.
Original value
Price, Quantity, Sales Rev
2 1 2
3 2 6
When display value from cube
Price, Quantity, Sales Rev
2,00 1,000 2,00
3,00 2,000 6,00
Why zero is showing? How can I display the original value? In PSA, values are showing correctly.
Thanks,Hi,
These are the zeroes after the decimal places. this is the property of the key figure.
In your report you can change the display value. In the display properties of the Key figure under the number of decimal places make it as 0. This will remove the zeroes.
Hope it helps.
Regards,
Gaurav
Edited by: Gaurav Kothari on Oct 16, 2008 10:35 AM -
Need help for report Variable to restrict the key figure value...
Hai gurus,
Now i have data in the cube as follows...
Reuisition HR INTW date LM INTW DATE TEL INTW DATE HR Count LM Count TEL Count
a1 01.01.2010 02.01.2010 01.04.2010 1 1 1
a2 02.02.2010 03.02.2010 02.02.2010 1 1 1
a3 03.03.2010 04.03.2010 03.03.2010 1 1 1
when i execute the report it shd ask the prompts with Date interval as in the below...
HR INTW date
LM INTW DATE
TEL INTW DATE
if i dont give any interval in the variable prompt it should display all the recors as follows
Reuisition HR Count LM Count TEL Count
a1 1 1 1
a2 1 1 1
a3 1 1 1
If i give LM INTW DATE interval as 01.01.2010 to 31.02.2010
then it should display all the other counts as in the output_1 , but for LM count for a3 it should show 0.
Reuisition HR Count LM Count TEL Count
a1 1 1 1
a2 1 1 1
a3 1 0 1
that means wherever i restrict the data depending on the variable that only that interval key figure value shd be in the report..
for this scenario, which variable i need to use... and how i need to restict the KFig value in the report...
Right now i am getting like this but it is restricting the records,,, where it should not restrict the records...in the report..
Please guide me for the same...
If any concerns about the scenario please let me know...
Regards,
VJhi chowdary ,
could you tell me the var. creation in detail and with which reference object i need to create ...
whether i need to take LM_DATE / 0DATE while creating variable...
and i kept this variables it in filter section, based on the LM_DATE Object.
i have tried both.. y'day when i take 0DATE it giving me some results...
But at the same time it is restricting the records..
i think it could be a problem with var.. properties?
need more inputs pls.
Regards,
VJ -
Error in key figure value at Reporting level
Hi Experts,
I had problem of Key figure value which displays wrong data in reporting.
The Process is :
I had added the key figure SALK3 to the generic data source (xxx). The Extractor is Table/View, Table is MBEW.I had replicated to BW side.
In BW, The process is Data Source(Generic) to 0MAT_PLANT(Infoobject (Added SALK3 to the infoobject of Attributes tab) ) loads to Multiprovider.I can see data in the multi provider for that particular field after loading.
Now the problem is, In Query designer i had added the key figure in Columns and ran the report.The output of the field is, If the value is 100 it displays 100 ERROR, if it 200 it displays 200 ERROR.Could you please help me on this,where i went wrong.
Regards,
Kishan.Hello,
Please check with the follwing screen shots:
Right click on the key fgure you created----select edit
Once the screen opens select the NODIM from Data Functions before the key figure (as highlighted).
Finally click on OK.
Regards
NS -
How to create a variable for key figure (value will be entered by the user
I want to create one query, where the user has to entered a max value when the query is started, so that only the query rows will be listed, where the key figure value (integer) of the row is smaller than the max value given.
How can i define that variable which has to start at the begin of the query; and also the restricted key figure iin consideration of the KF variable.
Thanks for helping
Ar.Hi Arnaud,
Go to Conditions-> Right click -> New Condition -> Edit -> NEw -> Selct the KEy figures from the dropdown( the KFs that are used in the rows/columns) -> Select Less than from the operator drop down (less than is for you case) -> Values, there is an option to create a variable -> Select the variable -> transfer. It will appear on the top.
Save & Execute, you will find it in your selction criteria.
Regards
Sunil -
BEx query: count unique key figure values
Hi
I need a little help with a query. I need to count the number of unique key figure values. Se example;
Data:
Employee1 - 2
Employee2 - 3
Employee3 - 2
Employee4 - 1
Employee5 - 2
Employee6 - 1
Employee7 - 2
Wanted output:
1 - 2
2 - 4
3 - 1
What kind of options do I have?
Thanks
MikeI would create a new characterstic for the same key figure and placed in rows and count in columns.
and second approach would be , create condition with customer exit and write the logic to count the unique values.
This is just a direction to move forward with the assumption that you are good in using variables and wirting logic in ABAP.
Thanks,
Sukhi -
Can we change key field values in table maintenance
Hi,
I have created Z-table and table maintenance for the same...
In table maintenance..Can we change key field values??
Is there any posibility????
Rayuduyou can do it in this way.
open sm30->tablname->edit
snow select the row(s)->copy->change the keyfield values-back->save.
no in that sm30, select records with old primary key and delete->save.
so you got all field similar for those record under modification, only the key field changed. -
Code to sum up multiple record key figure values from one ODS to another OD
We've got two ODSs: ODS1 and ODS2 and ODS1 feeds data to ODS2 through update rule. In ODS1, multiple records could contain one same doc records and we would like to sum up a key figure value for these multip records with the same doc number in the update rule and populate a key figure (a sum-up value or total value) in ODS2 for this doc number. We wonder how the code would look like.
Welcome the valuable input!
ThanksHello Kevin,
In this case there is no need of a code. As in ODS2, contract number is a key and PO is not a part of key, you can have update type for the key figure as "Addition". Value for that particular key figure will be added for all the recordes with same contract number irrespective of PO number.
Hope it helps.
Regards,
Praveen -
On what occasions do the key figures become attributes of characteristics?
hi all,
On what occasions do the key figures become attributes of characteristics? can anyone explain me with an example.
regds
hariHi,
When we create key figures also we can define the keyfigre as attribute, in the additional poperties tab by selecting attribute check box.
(or)
Once we created KF and activated, the same can be placed in Char attribute tab. In the Char creation, we can assign attributes as per our requirement. So the attributes may be be char/kf.
Best regards,
Ramakrishna -
Dynamic Description for Key figure values
Hi Experts,
I got a requirement for change the description in query analyzer.
Month 200901 200902 200903
qty value Past PRICE qty value future price qty value future price
Material 10 50 5 7 70 10 7 77 11
My requirement is price heading we need to show current date to previous months header is Past price and current date to future months we need to Future price.
Already I tried with two restricted key figures with current montthless than one key figure and currentmonthgreater than one keyfigure. When I using in query both key figure displayed in both sides.
I want to show past price heading for Less than current month and future price heading for greater than current month.
Please let me know any possibilities to show the description dynamically.
Thanks,
ChandraHi,
Here I'm giving sample code this will give the Date and Date-1 and Date-2 based on your Input date ZCDAY.Create 'ZT_DAY' 'ZT_DAY1' and 'ZT_DAY2' Text varaibles and use the code.
In the same way change the code for your requirement.
TO get the Date (TEXT VAR) based on ZCDAY Input variable***********
WHEN 'ZT_DAY' .
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZCDAY'.
IF sy-subrc = 0.
CLEAR: l_s_range.
l_s_range-low+0(2) = loc_var_range-low+6(2).
l_s_range-low+2(1) = '.'.
l_s_range-low+3(2) = loc_var_range-low+4(2).
l_s_range-low+5(1) ='.'.
l_s_range-low+6(4) = loc_var_range-low+0(4).
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDLOOP.
TO get the Date-1(TEXT VAR) based on ZCDAY Input variable***********
WHEN 'ZT_DAY1' .
DATA: ZT_DT1 TYPE SY-DATUM,
ZT_DT2 TYPE SY-DATUM,
ZT_SDT TYPE SY-DATUM,
ZT_YR(4) TYPE N,
ZT_DY(2) TYPE N,
ZT_MT(2) TYPE N,
ZE_TT(2) TYPE N.
ZT_SDT = SY-DATUM.
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZCDAY'.
IF sy-subrc = 0.
CLEAR: l_s_range.
ZT_DY = loc_var_range-low+6(2).
ZT_MT = loc_var_range-low+4(2).
ZT_YR = loc_var_range-low+0(4).
CONCATENATE ZT_YR ZT_MT ZT_DY INTO ZT_DT1. "YYYYMMDD
CALL FUNCTION 'DATE_CREATE_2'
EXPORTING
i_datum_ein = ZT_DT1
I_KZ_INCL_AUS = '1'
I_KZ_INCL_EIN = '0'
I_KZ_ULT_AUS = 'X'
I_KZ_ULT_EIN = 'X'
I_STGMETH = '0'
I_SZBMETH = '0'
I_TAGE = 0
IMPORTING
E_DATUM_AUS = ZT_DT2.
l_s_range-low+0(2) = ZT_DT2+6(2).
l_s_range-low+2(1) = '.'.
l_s_range-low+3(2) = ZT_DT2+4(2).
l_s_range-low+5(1) ='.'.
l_s_range-low+6(4) = ZT_DT2+0(4).
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDLOOP.
***TO get the Date-2 based on ZCDAY Input variable***********
WHEN 'ZT_DAY2' .
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZCDAY'.
IF sy-subrc = 0.
CLEAR: l_s_range.
ZT_DY = loc_var_range-low+6(2).
ZT_MT = loc_var_range-low+4(2).
ZT_YR = loc_var_range-low+0(4).
CONCATENATE ZT_YR ZT_MT ZT_DY INTO ZT_DT1. "YYYYMMDD
CALL FUNCTION 'DATE_CREATE_2'
EXPORTING
i_datum_ein = ZT_DT1
I_KZ_INCL_AUS = '2'
I_KZ_INCL_EIN = '0'
I_KZ_ULT_AUS = 'X'
I_KZ_ULT_EIN = 'X'
I_STGMETH = '0'
I_SZBMETH = '0'
I_TAGE = 0
IMPORTING
E_DATUM_AUS = ZT_DT2.
l_s_range-low+0(2) = ZT_DT2+6(2).
l_s_range-low+2(1) = '.'.
l_s_range-low+3(2) = ZT_DT2+4(2).
l_s_range-low+5(1) ='.'.
l_s_range-low+6(4) = ZT_DT2+0(4).
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDLOOP.
Thanks
Reddy -
Key Figure values in the Bex Report are different from the cube
Hi all,
When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
Could some one help me find a solution to this issue.
I look forward to hearing from the experts.
Regards,
S.PHi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P
Maybe you are looking for
-
Trying to pull in Cost of Goods Sold Account from Master Items.
Running Oracle EBS 11.5.10.2 on 10.2.0.4 database. I have written item master code and I am now trying to pull in the Cost of Goods Sold Account from the Costing Tab in the Master Items Screen. I was able to join MTL_SYSTEM_ITEMS to GL_CODE_COMBINATI
-
business catalyst no figura en sitio de mi dreamweaver, como hago para que figure en el administrador de sitios?
-
Need to remove Commas REgular Expressions?
How can I use java to remove commas from a number. 1,000 string need it to be 1000 can I pass it through some sort of regular expression?
-
Hi All, I have <b>Http to JDBC</b> scenario in which I need to send the messages EOIO. For this I need a queue.In Http client I set the QoS : EOIO .But I need to give a 'queueid' to make use it. Plz any one knows how to create,Register and Acitvate
-
Unexpected Error Encountered - Login Page
Am getting the error below when i try login in to E-Business Suite Details for my environment are as follows OS: Solaris SPARC 64 Bit Version 10 DB: 10.2.0.3 Application: 12.0,4 Have tried the steps listed below without any success 1. Bounced Apache,