Change key function on 6303i

how can i change the function on the right hand button on my 6303i from the web to a shortcut of my choice.

menu/settings/shortcuts.
now some networks lock this key and you may not be able to change it
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Changing the FN key function

Hello.
I don't remember how, but I accidentally changed my FN key function to "Show Desktop".
This means that every time I press "FN" it shows my desktop.
How do I disable this?
Thank you very much for your help.
Itai.

That was it. Sorry for my easy-to-solve question
Thank you very much!

Changing the function of the Media Player Hot Key on the Laptop itself

Hey everyone,
I was wondering if anyone knew of a way to change what the Media Player Hot Key on the Laptop itself does? I've got the Power Button, Internet, Media Player, Play/Pause, Stop, Rewind & Fast Forward, but the Media Player Hot Key is pretty useless to me, and I'd like to change its function, to open Outlook instead, but does anyone know if that's even possible?
I'm almost positive that there's a way, but I just can't seem to find it, if anyone can help me, then I would really appreciate it,
Cheers.

Hi
I remember it was possible to assign different functions to the control buttons on several units.
I dont know what unit your use but you should check the Toshiba control button application which could be installed on your notebook.
You should find it in the control panel
This application could allow you to configure the control buttons.
But if this software will not provide this option you will be not able to change the functionality

Change Media Key functions on X2-02

Hey all,
I have this somewhat old phone (the Nokia X2-02) and it's been great for me but there is one annoying thing i cannot address.
There are two “media keys” on the right side for Volume UP and Volume Down and I find them absolutely useless as they currently are.
My question is:
Is there a way to change the function of those keys to Next/Previous track (for media player) or any other function other than the volume?
Thanks

Hi,
I never heard that its possible to exchange single keys on a notebook keyboard.
I think you must buy a new keyboard but keyboards are not so expensive. Contact the nearest ASP in your country that you can find on the Toshiba website and ask for a replacement keyboard.
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
Good luck!

How to use key() function in XSL Mapper file?

I would like to use the XSLT key() function in an XSL stylesheet in the XSL Mapper designer, but I can find no way to include the <xsl:key> element.
key() should be supported as it is available in the component palette, but I can't find a way to add <xsl:key> in the designer, and if I add it manually the designer tells me it is not supported.
This is with Jdeveloper JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660 on Linux.
Any help appreciated, thanks.

The usual practice is to leave the XSLT as such. A person skilled in XSLT would know to open the XSLT in source mode if the design view is not supported. Almost most of AIA XSLTs are such and one has to only open them in source view.
You might want to document this into some document/guide which the person might refer before actually making the changes!
Cheers,
- AR

How to create the change document functionality for a dependent objects?

May I please know how to create the change document functionality for a dependent objects?
I have done it follow the same process as for business process objects. But when i try to test it in BOBT, there is no records under "FIELD_CHANGE_WITH_FILTER". It seems the change hasn't been recorded.
If the way I did to create change document for dependent object is correct, please also kindly advise the possibilities for why there is no record during testing.
thanks in advance.

I also have some doubts about the business object.In this case,one abstract BO hase a subnode wihich is root extended.I added the change document for this node under the category "root_extended" and then tested the function in BOBT.I got some error message "can't find the root key".Shall i redefine the method /BOFU/IF_CDO_CREATION~IS_CDO_CREATION_ACTIVE so as to solve the problem?
Thx.

Changes In Function Module

Hello abap Gurus,
My Zdevelopment reports shows the runtime errors due to
changes in this function module :-
ZCFM_HIDE_INITIALFIELD_ALV
So anybody pls. suggest me what i can do for this.I m attaching the coding also.
FUNCTION ZCFM_HIDE_INITIALFIELD_ALV.
""Local Interface:
*" IMPORTING
*"     REFERENCE(STRUC)
*"     REFERENCE(FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV
*"     REFERENCE(HIDE) OPTIONAL
*" EXPORTING
*"     REFERENCE(FIELDCAT_E) TYPE SLIS_T_FIELDCAT_ALV
*" TABLES
*"      IT_TAB
*"      IT_TAB1
DATA S_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
FIELD-SYMBOLS <F1>.
FIELD-SYMBOLS <F2>.
DATA FIELDNAME(30).
DATA VALUE(100).
DATA : BEGIN OF DISPLAY OCCURS 0,
FIELDNAME LIKE DD03L-FIELDNAME,
END OF DISPLAY.
LOOP AT IT_TAB.
DO .
READ TABLE FIELDCAT INDEX SY-INDEX
INTO S_FIELDCAT.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
ASSIGN SY-INDEX OF STRUCTURE IT_TAB1 TO <F1>.
CONCATENATE 'IT_TAB-' S_FIELDCAT-FIELDNAME INTO
FIELDNAME.
ASSIGN (FIELDNAME) TO <F1>.
IF NOT <F1> IS INITIAL.
DISPLAY-FIELDNAME = S_FIELDCAT-FIELDNAME.
COLLECT DISPLAY.
ENDIF.
ENDDO.
ENDLOOP.
FIELDCAT_E = FIELDCAT.
LOOP AT FIELDCAT_E INTO S_FIELDCAT .
READ TABLE DISPLAY WITH KEY FIELDNAME = S_FIELDCAT-FIELDNAME.
IF SY-SUBRC NE 0.
IF HIDE IS INITIAL.
DELETE FIELDCAT_E.
ELSE.
S_FIELDCAT-NO_OUT = 'X'.
CLEAR S_FIELDCAT-KEY .
MODIFY FIELDCAT_E FROM S_FIELDCAT TRANSPORTING NO_OUT
KEY.
ENDIF.
ENDIF.
ENDLOOP.
endfunction.

This is all about the runtime error :-
Incorrect parameter with CALL FUNCTION
Error analysis :-
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_MISSING', was
     not caught in
    procedure "HIDE_FIELDS" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When calling the function module "ZCFM_HIDE_INITIALFIELD_ALV", one of the
     parameters
    needed according to the interface description was not specified.
    This parameter was "IT_TAB1".
I am not changing the function module, my couligue has change this he leave it & he doesn't tel to me. So pls. give some sol. to me.
Thanks,
Sumit.

Note 123383 You are changing a function group which does not belong to you

Applying note 123383. Got SSCR keys from SAP to modify the identified tables.
When trying to save changes, get error message "You are changing a function group which does not belong to you".
I changed Function Group ownership to myself, but still get error message.
Anyone have an idea how to resolve?

Just in case... did you do the following?
"If, when you are maintaining certain views, the error message DS138 'Changes prohibited by user ... ' or error message EU522 'Changes to ... are prohibited by ... ' is generated, remove the <b>editor lock</b> from programs L0GFNTOP and L0GFPTOP as described in Note 37900."
~Suresh

LICENSE KEY FUNCTIONALITY

Hi,
I'm stuck. I've written a piece of software in Java and because of the way java's classes can be reversed
engineered I want to embedd and run the application on-line via my website say as an applet.
I read that applets can be very restrictive for example the user of my program will not be able to save
his work or a file on his hard drive. Thus not too sure how to wrap up the application.
How can I wrap up my java application such in order to acheive the following.
1) A license key is generated upon a valid purchase send out to the purchaser via his/her email address
2) Download my application with the necessary tools as say an icon on the users desktop.
I outsourced the license key functionality and was told by the programmer that there is no way that the license
key functionality would stop the user copying it onto another machine or passing it onto a friend - Am I missing
the point here as I paid for an incomplete solution but surley this should be the case. What are the steps required
to have safe license key functionality working properly.
Regards

opjava wrote:
I'm stuck. I've written a piece of software in Java and because of the way java's classes can be reversed
engineered I want to embedd and run the application on-line via my website say as an applet.Running it as an applet doesn't change anything. It will be just as accessible to reverse-engineering as if it were run as a normal application.
I read that applets can be very restrictive for example the user of my program will not be able to save
his work or a file on his hard drive. Thus not too sure how to wrap up the application.Unless you use a signed applet, yes.
How can I wrap up my java application such in order to acheive the following.
1) A license key is generated upon a valid purchase send out to the purchaser via his/her email address
2) Download my application with the necessary tools as say an icon on the users desktop.
I outsourced the license key functionality and was told by the programmer that there is no way that the license
key functionality would stop the user copying it onto another machine or passing it onto a friend - Am I missing
the point here as I paid for an incomplete solution but surley this should be the case. What are the steps required
to have safe license key functionality working properly.There is no absolutely secure way. Since the machine needs to be able to execute the code, it must understand it. Anything that can be understood can be reverse-engineered.
You can make it (slightly) harder by using a good obfuscator, but that only raises the clue barrier and doesn't produce an unbreakable barrier.
The only secure way is to never let the user have the code at all. That can be achieved by providing your software only as a web service/web application that you host yourself. This way the user can use the application but never have access to the code.

New wired keyboard, swapped key functionality?

hi -
I just replaced my keyboard for my iMac Intel Core Duo 10.6.8, 2GHz with the standard wired one. The aluminum keyboard is v 0.74, Apple made. The orignal died.
I used a Dell board for a bit, and used Sys Prefs > Keyboard to swap the OPT & CMD keys. Now I have a new wired Apple keyboard, and the system won't recognize it as an Apple board, and the OPT / CMD keys will not return to heir original roles.
I did these things:
1) sys prefs: reset default for keyboard command keys
2) sys prefs: swapped OPT & CMD key functions, didn't respond.
3) repaired disk permissions
I don't know what to toss as preferences that will influence the keyboard.
Any suggestions, please?
thanks.

thanks, but it didn't change anything.
I've also tried restarting after removing the system preference .plist as well as the keyboard layout .plist. Neither of these worked.
I tried swapping out the keyboard and mouse with a friend's and that did not change anything.
I've updated all OS software and repaired all permissions using Disk Utility.
Perhaps something is creating a conflict, but I haven't a clue as to what at this point.

Default F1-F12 keys function

How to change default function of F1-F12 keys.
For ex.
F9 shoudl be f9 no backlight down (if I push Fn key bckl down)
F10 should be F10 no backlight up (if I push Fn key bckl up)
This question was solved.
View Solution.

Hi,
Probably you are looking for:
http://support.hp.com/au-en/document/c02035108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Contacts Key Function Inactive: C3-00 model

Hello:
I have just purchased a Nokia C3-00. The left-hand side contacts key function is inactive, however, and I can't get this button to do anything.
When I press the left-hand side Contacts Function key, nothing happens at all. When I go to Menus > Settings > My Shortcuts, I can find information on the "Contacts Key," and it says "Contacts Key Off." When I click the "select" button at this menu to edit the contacts key, I see a menu for "Contacts Key" and the "off" radio button is clicked. But there is no option for changing this radio button to "on." If I try to click the menu button at this screen, I simply get a message confirming the fact that the "contacts key function is inactive." I would like the turn on the contacts key. How do I activate/turn on the contacts function key? Thank you.

I already done those suggestions you gave but still the same.. huhuhu.. My nokia c3 phone is a gift of my Ninong in my birthday last March but I dunno what happened to my phone, before I charge my mobile phone it's working and around 2pm today (this afternon) I charge my mobile phone and earlier at 4pm or I think 5pm I removed it because the battery is already fully charge and then when I turn it on there the problem goes.. I dunno why this happened, never used my phone today because I dont have load.. Could someone please help me.. NOKIA Help us!!

Side lock Key functionality in 5800 V50

Please Help Me ?
How this work "Side lock Key functionality"
Should we Change Something in Settings?? or somewhere else??
And How Should We USE IT??? by Holding The Key In UP And Down Position???
Solved!
Go to Solution.

Hi, don't really fully understand your problem, but the slide lock works by slidind down and releasing to both lock and unlock phone. You can go into settings to disable auto screen lock but the slider switch basically works like a toggle switch and simply does what it says on the box, locks or unlocks the phone !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

Change of functionality in deleting songs from iCloud/iTunes Match with the 11.0.2 version of iTunes?

I updated to iTunes 11.0.2 and this version brought a change of wording regarding deleting songs from iCloud/iTunes Match, and I'd like to know if there are any changes in functionality to match the change in wording:
With version 11.0.2, when I try to delete any song (uploaded, matched or purchased) I'm presented with a pop-up dialog box that asks me if I'm sure and also gives me a "Also hide this song from iCloud?" option.
In prior iTunes versions the pop-up dialog box would ask instead "Also delete this song from iCloud?".
Has the functionality changed? If so, what's the difference in functionality between 11.0.2 and previous versions? If the functionality of deleting songs has changed, how do I delete an uploaded song from both my local library and iCloud/iTunes Match?

I am having the same issue- pelase could anyone help? Mods?

Change key function on 6303i

Similar Messages

Maybe you are looking for