Change label of Standard field in Standard infotype

Hi,
I would like to change the label of a standard field in infotype 0185. How can i do this? I have maintained it in CMOD text enhancements and the field label is changed at data element level, however, the new label is not shown at screen level.
Regards,
Vishal Bhatia

Try changing the label at
se51 > prg name: MP018500; screen number 2000

Similar Messages

Change label of Standard user attributes in Create user page

Hi,
Can any one tell me where I must change labels names for standard attributes like "Form of address" and "Position"
in the Portal.
Please, I am aware of adding custom attributes. I do not need Information on that.I need to rename only standard labels. So the method getSalutation() UME API will return values for the new label (used in place of the old label"Form of address"). "datasource configuration database only.xml" does not have any fields where I can edit this Information. Can this be done anywhere in Portal Content translation.
I have seen an existing scenario,where this was implemented. Can you provide information ,As I am not sure how exactly this was done.There does not seem to be any major modification on the useradministration par file either. Where should I modify.
Regards,
Harish
(helpful answers will be suitably rewarded)

Hi,
1.Get com.sap.portal.usermanagement.admin.par.bak from PCD .
2.Rename com.sap.portal.usermanagement.admin.par.bak to com.sap.portal.usermanagement.admin.par
3.Create a project from com.sap.portal.usermanagement.admin.par
The form labels are defined in the property file adminlabels_*.properties within the umeuseradminbase.jar. umeuseradminbase.jar resides in Portal-inf/lib folder.
4. change the values for the required key.
5. deploy the file with the name com.sap.portal.usermanagement.admin.par.
6. restart the server
Please refer this thread for more.
how to change the text "form of address" while Create User in EP6.0??
Regards
Ganesan S

Changing label on PCUI field

Hi All.
I'm trying to change a label for a field in PCUI (CRM 5.0) Application CRMD_BUS2000112. The field (ORDERED_PROD) is in a field group SRC_GDT_ITEM and this field group is in the field group SRC_DISPLAY_GDT_ITEM. The label displayed must change depending of the Business Transaction type, my idea was encapsulate the field ORDERED_PROD in a new field group ZYYYY with a variant and then use customizing for changing the Text but when i'm generating layout for the field group SRC_DISPLAY_GDT_ITEM the following error is displayed "Field Group Could not be read completely". Did i miss something ? a better solution for this ?
Thanks and best regards.

Hi All.
The idea of encapsulate the field in a field group didn't work. Any idea about changing the field label depending of the Transaction Type ?
Thanks

HELP CREATING ADDITIONAL FIELDS WITH DROPDOWN IN STANDARD INFOTYPE

HI ALL,
I AM IN ABAP-HR.
I HAVE 2 THINGS 2 ASK MY FRIENDZ..
1). I WANT TO ENHANCE STANDARD INFOTYPE...
I WANT TO PUT ADDITINAL FIELD WITH DROPDOWN...
I CAN PUT ADDITIONAL FIELD BUT I DONT KNOW HOW CAN I DO WITH DROPDOWN...
2).
OTHERTHING I WANT TO CHANGE THE TEXTFIELD OF STANDARD INFOTYPE..
I MEAN 2 SAY CHANGE TEXT 'BIRTHDATE' TO 'DATE'..
CAN U PLZ HELP ME OUT 4 THIS....
WAITING 4 FAVOURABLE REPLY..
BBYE..

Hello Bhumit,
1) to check how to bring values to a dropdown please refer the standard demo report programs in se38
a)DEMO_DROPDOWN_LIST_BOX
b)demo_dynpro_dropdown_listbox.
2)We need to understand that if the field label 'BIRTHDATE' is from a standard screen then the approach is to go to that particular screen ...delete the text and put our own text there as 'DATE' ..otherwise if the field is a custom field we can change the name in the field level or domain level
Pls check,revert and reward if helpful
Regards
Byju

Showing fields of Custom infotype in standard infotype screen

Hi Experts
I have created a custom infotype 9xxx. Now when I go to the PA30 maintenance screen for a standard infotype 0795, i should also see the fields from custom infotype 9xxx. Can you please let me know how I can enhance the standard infotype 0795, since SAP does not allow me to change it directly.
Thanks
Neo

Hi,
I'm gonna be an *ss and ask why you wanna see the fields of your 9xxx - infotype in SAP IT0795.
If this is for information purposes, I believe this should be incorporated in reporting and not within master data infotypes.
Wilfred.

Adding Standard Infotype fields to Custom Infotype

Hi,
I have a Requirement where I've created a Custom Infotype. Now, client needs to add Standard KOSTL and Email Address fileds to it. Whenever, someone tries to create / change this Custom Infotype for any Employee, the Pernr's KOSTL and Email Address should get populated automatically as in Standard Infotypes 0001 and 0105.
Please guide me, how to achieve this functionality.
Regards,
Hems.

Hi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems.

How copy changes in standard infotype using scc1

hi,
i m enhancing standard infotype 0022 adding single field using pm01 .
changes are showing in our development client in pa30 screen,
but when i copy the request to other client changes are not reflecting in pa30 screen.
i checked changed screen layout it is showing that additional field but it is not showing in pa30.
pls help.
regards,
sudhir ghag.
SAP ABAP HR Consultant.

Hi ,
Pls check the entry in V_T582A in 2 different clients.
This must be missing in other client.
Transport this table entry.
Hope this will work.
Thanks
Partha.

Changing OTR of standard label

Hi all
I need to change the OTR of standard label of standard package ptrm_web_ui.
The thing I tried:
1. When I try bind standard OTR with my label in enhancement mode, the enhancement is lost when activate and test it.
2. When I try to bind label to my created OTR in enhancement mode ,the enhancement is lost.
But I need make these field visible or invisible according to condition which I am doing from fitvfeld_web
transaction.Now the problem is this work for only standard label.But I created my own label through enhancement.
Can anyone tell me how to change OTR of standard label ?

Hello,
What do you mean by "OTR"? Can you be more clearer on what you want to do?
Regards,
Raynard

Changing standard infotypes - HR

Dear list,
I have some general questions about changing standard infotypes. Although I am not new to ABAP, I have never touched HR before, and I was thrown into the deep water on a new job (and let me tell you it wasn't easy to get it) So please if you can give me any tips and descriptions about this subject, and I have searched a lot of forums, and only later did I realize that it's a new world out there with ECC6, so here are my questions: Just for background, the client has system ECC6, and it hasn't been upgraded from a previous system. In fact, HR still isn't live, but it will be soon.
We have system ECC6. Can I use the old way to change standard infotypes?
If I decide to use the new way, do I first have to decouple the standard infotype?
How can I tell/know if the standard infotype has already been changed? (Enhanced or just changed)
In the old way, can you actually change one of the standard fields, or only add new ones?
In the old way, can your new field be next to the old fields (in the same box or is it a subscreen), or can they only be in an u201CAdditional fieldsu201D box (subscreen).
Same question for the u201Cnewu201D way.
I understand that the u201Cnewu201D way is based on the new enhancement concept. Is it complicated to change/enhance the infotype this way, or not so complicated.
Thank you for your patience,
BR / MVH
Allan
Edited by: Rob Burbank on Feb 20, 2009 9:54 AM
You cannot edit a post once it has been replied to. Some posters were asking questions (probably of a very basic nature) and then after getting replies, would edit the original question to hide the fact that they were not as knowledgable as they they pretended to be.

We have system ECC6. Can I use the old way to change standard infotypes?
You can change the standard infotypes as always(I mean old way)
How can I tell/know if the standard infotype has already been changed? (Enhanced or just changed)
Check with the Version management.
In the old way, can you actually change one of the standard fields, or only add new ones?
Changing of a field is not allowed. You can add new fields in the CI_include provided
In the old way, can your new field be next to the old fields (in the same box or is it a subscreen), or can they only be in an u201CAdditional fieldsu201D box (subscreen).
New fields would be in the subscreen...

Standard screen changes-addition of a field in vendor master table

Hi Champs,
My requirement is to add a field in LFB1 table.
I have added the field in the table using append structure, that was fine.
I need to add the same for input/output on the screen 215 of program SAPMF02K (for the screen of Payment transaction Accounting at company code level).
The screen enhancement available for vendor master is for adding a new sub screen. But I need my field to be input/output on screen 215 of program SAPMF02K (for the screen of Payment transaction Accounting at company code level).
The only option left with me was to make changes in the Standard SAP screen as there are no enhancements available to suffice my requirement.
After taking the access key, if suppose i make changes in the standard screen viz. given a dictionary refrence to the new field created on screen 215. My query is do i need to do any kind of coding in PBO or PAI of the screen.
A quick reply would be overwhelming.
Thanks
Regards,
Nishant

Ofcouse Nishanth, u need to code in PBO and PAI event.
PAI -> To read the User input and for doing validations or some thing as per ur requirement
Hope this helps,
Shiva kankanala

Modify SAP standard fields in an Infotype

Hi friends!
We have enhanced an Infotype successfully added few extra fields and they work perfectly.
In Infotype 28, there are already 3 SAP standard fields and we have added 4 more.
Now, we need to enable/disable according to the our added fields. For Eg by a Custom check box, I need to enable/disable SAP standard field for an infotype.
We tried by LOOP at SCREEN and all but due to SAP standard fields we are unable to do it.
Any ideas?
Please help.
Thanks.

Hi Park,
Standard Infotype Fields configured (enable/disabled/hidden) in the view V_T588M (Tcode-SM30). You can disable any standard infotype field here if it is independent of other fields (i.e. before screen opens itself field is disabled).
If you want the field to be disable at runtime you may need to edit the feature 'PNNNN' (where NNNN is your standard infotype number (transaction -pe03)).
Also have you tried to code (loop at screen. endloop) in badi HRPAD00INFTY (method BEFORE_OUTPUT). I am not sure whether this will work or not.
Regards,
Shrinivas

Sending custom field added in Standard infotype through idoc

Hello All,
We have a requirement where custom field of a standard infotype 0002 needs to be sent through idoc only to a desired destination system.
My Approach:
I have created a custom segment having custom field from IT 0002 & mapped this segment in T777D table.
But the problem with above, is all the system who are receiving IT0002 will be receiving this custom segment also including desired system.
How can it be filtered?

Hi,
Create the new segment and message types of the idoc with cutom field.
Then map the new mesage type and corresponding receiver( SM59).

Can we delete the existing fields in standard Infotypes.?

can we delete the existing fields in standard Infotypes? if it is possible give me the procedure.

Hi,
use transaction code PU00
Or
u should use HR_INFOTYPE_OPERATION function module.
This is the std one for all he infotype related operations.
Regards

Impact of enhancing standard infotypes on service pack upgrade

Hi SAP experts,
I have a situation where in we had enhanced standard infotype 14 ( added custom fields to structure CI_P0014) in development systems and moved to production systems. Now these changes should be moved to project system in which the service pack upgrade is in progress. Will it impact the SP upgrade if I move my transports to these systems? Will it overwrite the sp changes for IT14?
P.S : The support pack was not applied to the system in which the std infotype was enhanced.
Regards,
Sameena

You should re-apply any customer enhancements etc to your development environment after SP's are applied - But only after you have a developer review potential impacts from SP and your development.
I think you would be fine as IT14 isn't updated often in SP's.
Cheers,
Brad

Wrapping standard infotype with customer dynpro

Hello,
I'd like to change the values in standard fields based on the values from the customer fields.
I'd like to do this when DELIMIT runs in PA30.
I'm thinking of wrapping the standard infotype with a customer dynpro.
Does anyone know if this is possible?
Could I use the customer dynpro to do all the value changes but still use the standard input checks?
Thanks and Regards,
Yosuke

The best option might be to create a field exit. Use report RSMODPRF to create field exit for Data Element DZMGEN. The report has a good help document, but it's pretty easy to set up the field exit.

Change label of Standard field in Standard infotype

Similar Messages

Maybe you are looking for