Change Language Dynamically in Adobe Interactive Form with Webdynpro

Hi Experts,
I want to display some text in Arabic in my Adobe Form. Where do I store the translations for the english text and how do I substitute it to display the translations. I also noticed one issue. When I hardcode some arabic text in the text field. It appears as a junk character when my form is displayed in the application. We are using ECC 6.0 and non unicode. Is it possible to display arabic in such an environment.
Regards,
Abdullah

Solved using JDBC

Similar Messages

  • Adobe Interactive Forms with Webdynpro

    Hi,
    I created Adobe form with Webdynpro with some fields for entry and submit button. when i am running on browser, fields are coming as display mode, i can't enter values nor submit button is working.
    Any help is appreciated.
    Thanks.

    Hello,
    Do you have your form dynamic? You need to have to be able to push button. And do you have your form interactive? (In WD it is "enabled"). You need to to use it as UI there and back, not only for printing. What type of framework you use? ActiveX or ZCI? If ZCI, insert WD script. Regards, Otto
    p.s.: Next time i can recommend you to move your question under Netweaver - Interactive forms

  • Unable to test Adobe interactive form from webdynpro

    This is the out put i get when i test run the report 'FP_TEST_IA_01'.As suggested in SAP NOTE : 999998
    ADS: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200.101).
    Actually i was trying my first Adobe interactive form with webdynpro and when i tested it i got this message.
    The following error text was processed in the system NED : WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server
    Does Adobe interactive form requires Java stack to be active??
    Or is it only a configuration issue in ADS???
    What all should i take care in order to successfully run an adobe interactive form???
    Regards,
    Venkar Raghavan

    Dear Abhishake,
    Thanks for your reply.
    I had gone through the link you had mentioned detailly.what i understand that is ZCI needs to be installed thats comming with Support pack SAP NetWeaver SPS 10 .
    Will this also take care of ADS configuration.Where can i find a guide to ADS configuration and ZCI installation.
    When i ran a report check FP_CHK_REPORT below is the output i got.can you please throw more light on this.
    ISR      Prepare ISR templates for ZCI migration             ISR-001   Prepare ISR templates for ZCI migration
    ZCI      SAPForms API to Zero-client template migration ZCI-002   Update enumerated DDL XFO bindItems node reference
    ZCI      SAPForms API to Zero-client template migration ZCI-003   Copy enumerated DDL XFO form:ready non-Adobe scripts to the layout::ready ev
    ZCI      SAPForms API to Zero-client template migration ZCI-004   Add an XFO name to each of the embedded P1 Enumerated DDL XFO event handlers
    ZCI      SAPForms API to Zero-client template migration ZCI-001   SAPForm API to Zero-Client template migrator
    Regards,
    Venkat

  • Search Help on Adobe Interactive Form with Web Dynpro ABAP

    Hi All,
    I have created Adobe Interactive Form with ZCI type and XML based interface type using Webdynpro ABAP.
    I placed a text field USER_NAME on the form ( data element is linked to search help USER_COMP ).
    Added Native WD UI element 'Value Help' to form to search for users and changed script
    *var fieldName = "INSERT_NAME_HERE*"; to var fieldName = "USER_NAME";
    The problem is that when I click on the value help button, nothing happens.
    Is any more additional steps required ?
    Thanks
    Karu

    Hello
    Check this
    F4 Value Help on Adobe Interactive Form with Web Dynpro ABAP
    Thanks
    Anirudh

  • How to use Adobe Interactive forms with ISR frame work in Webdynpro forJava

    Hi,
    Anybody worked on Adobe Interactive forms with ISR frame work in Webdynpro for Java in ESS/MSS development.
    We have already searched in ISR_Cookbook_2004, however we didn't anything related webdynpro for java in that.
    Any information regarding this will be of great help.
    Regards
    Satish Kumar

    There are a number of issues here. A form that you created with LiveCycle Designer (XFA) cannot be used with FormsCentral. An Acroform, the kind you can create with Acrobat, can be used with FormsCentral, with certain limitations,  one of which is skip logic. A dynamic XFA form allows for this type of thing, but as mentioned, they don't work with FormsCentral. You can set up an Acroform to show/hide or activate/inactivate fields based on selections or entries made in other fields, but you'd have to set this up in Acrobat, not FormsCentral. So you can set up something roughly equivalent to a web form's skip logic, but you'd have to learn how to do this in Acrobat using JavaScript. There is a separate Acrobat JavaScript forum here if you have any questions.

  • Adobe Interactive Forms with Browser Apple Safari and Mozilla Firefox

    Hi Experts,
    We have a requirement to implement HCM P&F using Adobe Interactive Forms. These Adobe Forms will be accessed using Browser Apple Safari and Mozilla Firefox. I have come across that the Adobe Interactive Forms are not supported on these browsers. In the same regard I have also gone through the Product Availability Matrix by SAP which specifies that Forms are not support on these browser and neither SAP has future plans to support them.
    PAM can be found on link:          http://service.sap.com/pam
    I would like to know from experts that if any of the project has successfully implemented Adobe Interactive Forms with browser Apple Safari and Mozilla Firefox or
    is there any solution which can make these forms work successfully on browser Apple Safari and Mozilla Firefox.
    Your early reply will be highly appreciated.
    thanks
    Manoj

    Hello,
    Mozilla Firefox is supported for Adobe Interactive Forms on Windows operation system.
    Unfortunatelly we do not have support for Mac OS and Safari browser.
    Please re-check the PAM.
    Best regards,
    Dezso

  • Multi language support for Adobe interactive form

    Hi ,
      I translated the adobe form in multi language in SE63, If i execute the form with passing LANGU(language) parameter, form supports for multi language.
    I created XML schema based interface and if a execute interactive form in Webdynpro, i am unable to pass launguage(LANGU) parameter.  because InteractiveForm element property does not have language key parameter.
    Apart from creating different language dependent forms, is there any alternate way we can pass the LANGU key parameter to Interactive Adobe form???

    Hi Thomas
    Let me share my few more investigation on the same, I chaged form each element property to login language.
    and translated form to other languages. If directly execute form in sfp with loging in different language i am getting right result. it means even no need to pass the LANGU parameter.
    But same thing if i execute from Webdynpro i am getting default 'EN' language form, even though i login in 'DE' language.

  • ABAP WD application - Dynamic filling adobe interactive form

    Hi,
    I am developing a WD Application which has  Adobe interactive form in which when user enters an input field 1 it should automatically populate respective values for input field 2 in the same form.I have this relation maintained in ztable.
    How do we handle this?
    Rgds
    Vara

    Mahesh,
    Sorry for the confusion.
    Here is my req..
    My WD application will have a parameter-Inputfield1 for entering job number
    My interactive form will have
    - Inputfield1 as header.
    - A dynamic table with inputfield2 & inputfield3
    Inputfields2 as item values - should be filled automatically after user input inputfield1 ,
    inputfields3 will be manual entry from user
    Finally i should take all these 3 values and submit it to SAP.I can have a SUBMIT button for this at the end of the form.
    rgds
    vara

  • Adobe Interactive forms with Graph and Japanese text

    Hi Experts,
    I want to use graph/bar/pie chart with Adobe Interactive forms and along with that the UI element's(Button,lable,table header,column) text has to be in Japanese language.
    Is it possible using Adobe interactive form ?
    Thanks in advance.

    I don´t understand. Where do you want the Japanese texts? In the ordinary fields? Then you have to use (of course install first) some Japanese fonts for the fields. If you would like to have the texts in the picture, then there is no problem with the form since the texts are coming as a part of the picture into the form and you don´t need any fonts. Of course you need to install/ configure the japanese fonts in the backend to be able to draw it into the picture.
    Otto

  • Configuration of Adobe Interactive Forms with CE 7.2

    Hello all,
    We use ALD 8.1 in our ECC ABAP development system and we get the Adobe Interactive Forms services from our SOLMAN (java stack).
    We would now like to use ALD 9 which can only be configuered with CE 7.2 (Note 1522483).
    We could find the documentation for the configuration of Adobe Document Services in CE 7.2 in the following path:
    [http://help.sap.com/saphelp_nwce72/helpdata/en/45/bf03b55b9847f2e10000000a114a6b/frameset.htm]
    But we could not find the configuation guide for the Interactive Forms part. Does anyone have this documentation?
    Do we still have to create the Destination FP_ICF_DATA_SID?
    What is the Path Prefix in the ADS RFC from our ABAP system? The old one doesn't seem to work anymore.
    Thanks,
    Oren Harlap

    have to close it! problem unsolved

  • Adobe Interactive Forms with ABAP

    Dear Fellows,
    I need to know if I can develop an Adobe Interactive Form through the ABAP Workbench and Form Builder. ´Til now, I only found information about Print Forms with ABAP.
    Thank You very much for Your help.
    Regards.
    SS.

    Hi,
    What version are you on? Pl take a look at the following <a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20in">link</a>
    http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20interactive%20forms%20based%20on%20adobe%20software.faq
    Regards,
    Suresh Datti
    Message was edited by: Suresh Datti

  • F4 Value Help on Adobe Interactive Form with Web Dynpro ABAP

    Hello,
    I have created an Interactive Form with ZCI type.
    I placed a text field MATNR on the form.
    Then I placed a Native WD UI element 'Value Help' as mentioned in the below link: http://help.sap.com/saphelp_nw70/helpdata/EN/42/fb2fe500553ee4e10000000a1553f7/frameset.htm
    This form was then embeded into Web Dynpro ABAP view.
    The problem is that when I click on the F4 button, nothing happens.
    Is anything else needs to be done?
    Thanks
    Sagar

    Hi Amol,
    After binding the Context variable in the view, and in the Adobe Layout Designer from the Library go to WebDynpro Native Tab and drag and drop the Value Help and for this automatically JavaScript is being generated, go that script and edit the line
    Var fieldname = "yourfieldname";
    Note: Don't forget to link the context attribute to search help. ie. in the context properties of the attributes select the input help mode as dictionary search help and specify the name of the search help present in data dictionary.
    And now go to Utilities and click on u201CInsert Web Dynpro Scriptu201D.
    Also make sure that you specify the Layout as ZCI Layout in the Propertioes of the Adobe Form.
    Ragards,
    Amol Patil.

  • Generate Adobe Interactive Form with XML Schema-Based Interface

    Hi,
    I need to generate a adobe Interactive but with XML Schema-Based Interface, i have one example but with ABAP Dictionary-Based Interface.
    CALL FUNCTION 'FP_JOB_OPEN'
      CHANGING
        ie_outputparams       = fp_outputparams
    * EXCEPTIONS
    *   CANCEL                = 1
    *   USAGE_ERROR           = 2
    *   SYSTEM_ERROR          = 3
    *   INTERNAL_ERROR        = 4
    *   OTHERS                = 5
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
      EXPORTING
        i_name     = 'ZMMDM_CL'
      IMPORTING
        e_funcname = fm_name.
    But when i call the next function for print i need the docxml parameter and i don't know how to get it
    fm_name
    CALL FUNCTION fm_name
      EXPORTING
       /1BCDWB/DOCPARAMS        = fp_docparams
    *    /1bcdwb/docxml           =
    * IMPORTING
    *   /1BCDWB/FORMOUTPUT       =
    * EXCEPTIONS
    *   USAGE_ERROR              = 1
    *   SYSTEM_ERROR             = 2
    *   INTERNAL_ERROR           = 3
    *   OTHERS                   = 4

    1) this questions was asked many times before, you didn´t search for a second
    2) I am not aware of any standard solution
    3) custom solution: use XSLT transformation ID to get XML from the filled DDIC structure and use string operations to add the header and footer to create a valid XML.
    Regards Otto

  • Adobe interactive form with 2 Iviews

    Hello
    I have a adobe interactive form which is filled by an employee and then the HR department should approve it
    How can I develop it so only the HR department user will see the approve / disapprove button ?
    should I create 2 iviews?
    thx
    Shai

    If the adobe form is embeded with Webdynpro java, developers can modify the code and implement it.

  • Adobe interactive form with ABAP workbench

    Hi Experts,
    Need to know, can we run Online Adobe interactive form using ABAP ( Not webdynpro ABAP or Java) workbench? If so how? and if possible please provide the driver program which run the form & after filling it, it updates SAP data online.
    Regards,
    Nik

    That is possible by using FLM tool. You need to buy it separately. Its an ARCH product. Or if its HR forms then you can use HCM proceess & forms.

Maybe you are looking for