Change Left Softkey to Directory softkey on Cisco Wireless 7925

Does anyone knows how to change the left softkey to "directory" key?
Currently if you go under SETTINGS > PHONE SETTINGS >CUSTOMIZE HOME PAGE > LEFT SOFTKEY
only provides two options " MESSAGE" and "PHONE BOOK", I want "DIRECTORY" to be listed.
Any ideas?
Thank you in advance for your help.
Alfredo

Here is what TAC responded to my questions. ( I though I share this just in case someone else is asking the same questions and still looking for an answer:
2-We also discussed if it was possible to have the lines/speed dials on the front screen of the wireless phone
3-Also if it was possible to change the softkeys that appear at the home screen which are “ Messages” and “Options”
4-Also if you can change/delete the options that appear under the Directory, such like #4 Personal Directory and option #6 Phone Book
Points 2-3-4 are not configurable for these phones. These specific settings are already hardcoded into the phones, that’s why we don’t’ have the ability to customize these fields.
CUCM Team
.:|:.:|:. Cisco TAC Engineer

Similar Messages

E71: 'Memory full' when holding left softkey to re...

A feature of the E71 is when you hold down the left softkey in the Home screen, it will speak unread SMS to you. Lately, and still after a hard reset, I get:
'Memory full. Close some applications and try again.'
Of course the memory is not full (75MB free) and I have rebooted. Any ideas?
Solved!
Go to Solution.

Oh yes I do have the voices.
I just figured out the reason for the bug. Nokia Conversation (their threaded SMS add-on) was causing it. When I uninstalled Conversation the softkey functionality returned. Although Conversation says it's compatible with the E61 and E70, I guess that doesn't quite stretch to E71!

Changing the Default Save Directory in Acrobat

I am currently working with multiple systems, some using Acrobat 7.0 and some using 6.0.
Basically, I am wondering if in either of these versions of Acrobat it is possible to change the default save directory to something other than 'My Documents.' Acrobat will remember the last directory I saved to if I have already saved to that location once in a given session, but if I exit the program and then enter it again, it defaults back to 'My Documents' instead of the last place I saved.
Is there a way to set the default directory in 6.0 and/or 7.0?

No. Put a short cut to where you want to go in the My Documents folder and you are only 1 step away.

Changing File Adapter target directory - container bounce required?

I edited USPSshipment.wsdl in the FulfillmentESB project to reflect my desired target directory (/home/oracle/usps_ship instead of C:\temp) and then re-registered the project with ESB.
The registration completed normally, and I verified that the edited USPSshipment.wsdl file exists in the deploy and content directories in the ESB home. Also, checking the WSDL file from the ESB console showed the new value.
However, until I bounced the OC4J_soa container, order submissions continued to use the C:\Temp target. After I bounced the container, the next order submission went to the desired /home/oracle/usps_ship.
What is the expected cacheing behavior here? Is there a programmatic way to clear the cache after an ESB deploy. It is too restrictive if I have to bounce the whole container serving ESB and BPEL (perhaps many processes and ESB adapters) just to make a change in one particular project.
Thanks.

Using the SOA Demo, FulfillementESB project ~
Example: Immediate reflection of change w/o further action
If I change the Shipment router filter criteria (Fulfillment_Shipment.esbsvc) to cut at say $750 instead of $500, then re-register FulfillmentESB with OrderBookingIS, JDeveloper reports:
Registration of Services Successful
Fulfillment Shipment Updates
The next submitted order follows the new criteria (e.g. a $600 order goes out USPS).
Example: Change not reflected in runtime, until OC4J container restarted
If I change the target physical directory of the USPS Shipment file adapter (USPSShipment.wsdl), then re-register FulfillmentESB with OrderBookingIS, JDeveloper reports:
Registration of Services Successful
However, the next submitted orders continue to be written to the previous target physical directory. Checking the value of the re-deployed USPSShipment.wsdl at the ESB host filesystem and through the ESB console shows the updated value, but the old copy is being actually used to process the message.
Restarting the OC4J container, causes the updated USPSShipment.wsdl to be referenced for messages submitted thereafter.
-Todd
Message was edited by:
tbeets

Changes in Microsoft Active Directory Services into a file

I am in need of sample code to capture changes in Active Directory services into a flat file.
Here is my requirement:
I would like to capture user information changes from the Active directory server into a flat file.
For an example, When a user is newly created in Actives Directory Server, I need to Capture that user info and write into a flat file. Similarly for update and delete user in Activer Directory server, i need to capture the changes and write into a file.
Would appreciate, if any could help me on this
Thanks in advance
Thanks
Kumar

Refer to:
JNDI, Active Directory & Persistent Searches (part 1) http://forum.java.sun.com/thread.jspa?threadID=578338&tstart=200
There was another topic that I posted called JNDI, Active Directory and Persistent Searches (part 2) in which I described teh LDAPNotification Control.
It had the following URL http://forum.java.sun.com/thread.jspa?threadID=578342&tstart=200 however it seems as though I have suffered another case of the forum losing my posts.

Setting up Directory Handlers under Cisco Unity Connection

Good Day All,
I am in the process of setting up directory handlers for Cisco Unity connection.
When I dial the extension for the directory handler ; I hear the default Cisco Unity connection greeting instead of being prompted for the search.
Can anyone shed any light on why this is happening?
Any help is greatly appreciated.
Thanks very much
Regards
Amanda

Hi javalenc,
Of course , that was right. I worked it out in the end.
I was trying to copy the configuration from an older version of CUC and basically added an un-needed call forwarding rule under the Directory Handler. As soon as I removed it; the directory worked normally.
The other thing I learned last weekend was that the order of the routing rules is important.
My directory had the first priority and it was causing people who wanted to leave a voicemail for other users to get the prompts for the directory.
Thanks so much for the help though.
Regards,
Amanda Lalli-Cafini

Failure to Synchronize Directory Services in Cisco Desktop Administrator

Hi,
I'm not able to synchronize directory services in Cisco Desktop Administrator. I found a document but it's for older versions of Cisco CRS version 3.1(3) SR2. I'm using Cisco CRS version 5.X.
I hope that someone can help me.
Thanks.

Hi there,
We already performed those steps but it's not working.
On Cisco.com I found the same kind of issue but with CRS 3.1 (Failure to Synchronize Directory Services in Cisco Desktop Administrator - Reset Password). I tried to find a similar document but for CRS 5.x, but all in vain. I will attach the document and I hope and someone can help me to solve this issue in the CRS 5.x version.
Thanks.

How to change the saplog.ini directory?

Dear all,
The default directory of SAPGUI logon configuration file is %windir%, now I want to change this configuration file directory, how to change it?
Please help me.
Passion

Wu -
We keep ours under C:\Program Files\SAP. To do this we modified the system variable SAP_LOGON_INI_FILE to reflect the path we wanted it to be. We did this by inserting the registry entry under HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Enviroment when it is installed.
Hope this helps.
Regards,
Zecher

Can't change my dvd region back, one change left?

I changed my dvd region to region 1 the other night with the intention of changing it straight back to 4 after watching something, however now it won't let me! It said I had 2 changes left so I didn't stress and made the region change and now it proceeds to say I am on my last change, however whenever I click the "change dvd region" button it simply disappears and ejects my dvd. When I insert it again it comes up with the same message instructing me that it is my last change and it's still on 1.
I obviously wouldn't have changed the region in the first place had it said it was my last change but I figured I could just change it back permanently after my last switch! I know you can only change 5 times but I trusted that it said I had 2 left. I downloaded VLC but that doesn't play either. What can I do about this?

I don't know what the problem is with one change left, but this might point you in the right direction.
https://discussions.apple.com/thread/3731070

My CD drive wont change to region 2 again even though i have 1 change left, any ideas?

My mac wont change the region code from 1 to 2 and every time i try to set the region even after i have unlocked it and click change the window with the map just closes and nothing happens and when i try again the region is still stuck on 1, but it says i still have one change left

I see that no one knows the answer to this question, or prepaid customers don't get Verizon customer service help unless they dial an 800 number. I will post the outcome when I switch my current phone out and activate the new one. I don't hate Verizon or I wouldn't activate a new phone to their service, so even if I don't get the outcome that I want, I will just post what the process was like.
I think it will be easy, but they probably will require another payment even though my next payment isn't due until the 12th. I'm not a pessimist, nor do I go around complaining on discussion boards. I just feel that if they weren't going to charge me, a customer service agent would have gladly replied. I still think prepaid is the way to go, and I've never had problems with Verizon, so if I do get charged, I will use my experience to help other customers.

SuperDrive DVD region not changing despite having one change left.

My DVD superdrive won't change back to 'Region 2' after watching a 'Region 1' DVD. When I insert the 'Region 2' disc the pop up menu comes up asking if I want to change the region to match the disc. It says that this is the last time I can change the region but when I click the option to change it nothing happens and eventually the SuperDrive winds down.
Mid 2009 15" MacBook Pro - Mountain Lion (10.8).

I don't think so because when I inserted the Region 1 disc it said I had two changes left. So that's one change to change from R2 to R1 then the last change to change back to R2. It quite clearly states in the image above that I have one last attempt.

Change left frame in SUS

Hello all, I am trying to change left frame that appears when an user login in SUS system.
I know that these options appears taking into account all roles that have each user, for example, if an user has role administrator, there appears all options for administrators (monitor business partners, etc...)
How can I change it? I think is in framework BSP's but I don´t know how exactly is the process to change them.
Thanks in advance
Rosa Rodríguez

You have to change only the role and create new BSP option inside the role that you need to change.

MacBook Pro will not connect to Cisco Wireless Network

I have just bought a brand new MacBook Pro, running Leopard (OSX 10.5.1) and I just cannot get it to connect to the Wireless Network at my workplace.
The MBP connects to wireless network and authenticates just fine, but will not obtain an IP address from the DHCP server.
The wireless network consists of 16 Cisco Aironet 1200 Access Points controlled by a Cisco Wireless Network Controller. It does not broadcast its SSID and is WEP 128-bit hex protected.
Changing the network from WEP to WPA is out of the question for me as this is under the control of my customers IT Department and they do not have any problems with their PCs connecting to the network. It appears to be an Apple issue.
For reference, my old Vaio PC, my Nokia N95 and my iPod Touch ALL connect to the same wireless network without any problems whatsoever, first time, every time!
If I boot into Windows XP from my Boot Camp partition, XP can connect wirelessly to the network without any problems, so it is not MacBook hardware related...
It has to be a bug in Mac OSX... doesn't it?!?
Things I have already tried (following suggestions on many forums):
* Switching Airport off/on
* Deleting various network-related Plist files and rebooting
* Manually assigning an IP Address (not really permitted but doesn't work anyway!)
* Disabling all network adaptors except Airport
AP Grapher shows that the MBP is connected to the wireless network, at good strength, and packets are being sent and received, but Internet Access is not possible as no IP Address has been assigned. Instead, my MBP shows a 169.* IP Address (self-assigned). It should be a 10.1.255.* address.
Can anybody please help? Thank you.

i posted this same reply elsewhere because it worked for me for my Buffalo wireless router: try manually setting your IP address instead of relying on DHCP, which sometimes (I don't know why) doesn't work well with Macs. It's a good get around. I am a happy Mac user but nothing is perfect on earth, and when the Mac gives problems, it does give a lot of frustration. Macs are not as easy to troubleshoot as Win because a Mac is built to be user friendly(and it works most of the time), meaning a lot of the background computing stuff is hidden away from users to avoid user accidentally upsetting some settings.
Unfortunately, the highly automated troubleshooting wizards provided by OS X are not perfect so when these software wizards fail to resolve the problem, like my Network Diagnostics, I have to spend more time tinkering around. There's "Terminal" of course but then most of us, especially PC converts to Macs, don't know how to use it.
You should also try updating your MBP, see if there are any new updates being released.

Cisco Wireless Location Appliance

dear
i have WCS with 500 ap License
i need to have Cisco Wireless Location Appliance what lisens i need for 500 ap
please explain to me that

Hi Ahmed,
This is the upgrade License SKU for upgrading WCS to WCS Location;
WCS-LOC-UPG-K9
Supports deployment of Cisco WCS on a single server only.
For customers upgrading from their existing Cisco WCS base licenses to equivalent Cisco WCS location licenses running Cisco WCS Software Release 4.1 or later.
Available as Cisco WCS location in increments of 50, 100, or 500 lightweight access points.
Customers currently using this license with Cisco WCS Software Release 4.0 are encouraged to upgrade to Cisco WCS Software Release 4.1, but they are not required to do so.
Order the Correct Cisco WCS SKUs
The process to order Cisco WCS SKUs for WCS-STANDARD-K9, WCS-LOC-UPG-K9, WCS-WLSE-UPG-K9 and WCS-ENT-K9 is presented below. To request help with ordering, please contact Cisco Customer Service: http://www.cisco.com/go/customerservice.
1. Login to the Cisco Ordering Tool.
2. Enter the family SKU of WCS-STANDARD-K9 or WCS-LOC-UPG-K9 or WCS-WLSE-UPG-K9 or WCS-ENT-K9 into "Enter Product" in the Ordering Tool and then press "Enter."
3. The family SKU will display in the ordering area. (Figure 6).
4. Select the "Line" for the family SKU
5. Once you have been taken to the configuration screen, select one of these options from the left side (Figure 7):
For WCS-STANDARD-K9 select one of the sub-SKUs based on the following:
Base: WCS Standard AP Base Option
Location: WCS Standard AP Location Option
For WCS-WLSE-UPG-K9 select one of the sub-SKUs based on the following:
Base: WLSE to WCS AP Base Upgrade Option
Location: WLSE to WCS AP Location Upgrade Option
**For WCS-LOC-UPG-K9 select the sub-SKU:
**WCS AP Location Upgrade Option
For WCS-ENT-K9 select the sub-SKU:
WCS Enterprise AP Location Option
For the WCS-STANDARD-K9 or **WCS-LOC-UPG-K9 SKU families, customers are prompted to order the optional CD (WCS-CD-K9), for a nominal charge, during the ordering process. The WCS-CD-K9 contains one software image of Cisco WCS Software Release 4.1 on a CD for Windows and Linux. This CD is shipped by U.S. mail to the purchaser's address. The optional CD is not available for WCS-WLSE-UPG-K9 because this SKU family already ships in CD format.
6. The right side of the screen will display the licenses available (Figure 7). The price for each SKU is displayed in the Ordering Tool.
7. Each license is orderable in a quantity of one (1) for the quantity blocks specified. To add multiple quantities of license blocks, you must go back to the main screen and order additional family SKUs and then select the sub-SKU option and license quantity block required. Repeat this process as needed, until the correct quantity of license blocks for your sub-SKU have been ordered.
From this good doc;
http://www.cisco.com/en/US/products/ps6305/pro ducts_data_sheet0900aecd804b4646.html
Hope this helps!
Rob

Cisco Wireless AP

Hi
I have a cisco wireless AP AIR-LAP1242G-E-K9
When I plug the network cable into the back this lights come on and change colour.
Does anyone know what the lights mean when they change colour?
Thanks
Regards

Hi Jayesh,
Color change can be due to many reasons
Status LED indicates operating state, association status, error/warning condition, boot sequence, and maintenance status.
Ethernet LED indicates status of activity over the Ethernet.
Radio LED indicates status of activity over the radio.
http://www.cisco.com/en/US/docs/wireless/access_point/1240/installation/guide/124h_c4.html
Regards
NikhiL

Change Left Softkey to Directory softkey on Cisco Wireless 7925

Similar Messages

Maybe you are looking for