Change Leopard to display Tiger's dock.

Dear members:
This is probably a minor issue for most but I have found the new dock on Leopard to be quite annoying. I really prefer to work with the dock in Tiger.
Although I have already upgrade the office computers to Leopard my home computer is still running Tiger. Due to need to install a few applications that are only available for Leopard (not for Tiger) I will have to upgrade my home computer also.
Is there a way (either using Leopard features or third party applications) to change the dock so that it looks the same way it does in Tiger ?
Thank you in advance for your help and responses.
Joseph Chamberlain

you can easily modify the look of the dock in leopard but it won't look exactly like it did in Tiger. see this link for lots of custom docks instructions on how to apply them
http://www.leoparddocks.com/index.php
You can also use [Liteicon|http://www.freemacsoft.net/LiteIcon> or [candybar|http://www.panic.com/candybar> to apply new docks.
if you don't like the 3d dock look you can make it look 2d with [Tinkertool|http://www.bresink.com/osx/TinkerTool.html].

Similar Messages

How do I change leopard emlx into tiger emlx?

Had to salvage everything from time machine.
I have Tiger up and running (yeah!) However, old sent emails in leopard are not readable (either on a leopard machine or a tiger machine)
(library>mail>mailboxes>new folder> messages> reboot mail, rebuild the messages folder is greyed out)
So, I'm looking for a way to downgrade the Leopard email so I can convert it all to an mbox- which I know I can do in Tiger.
All suggestions welcome.
Ziska

Hi Ziska,
I think the only way you're going to be able to do that is with another eMail client, like...
Eudora, (can Import your Mail from Mail)...
http://www.eudora.com/download/
Maybe Thunderbird...
http://www.mozilla.com/thunderbird/
Once imported into that/those, Import into Tiger's Mail.
Or possibly...
http://www.macupdate.com/info.php/id/8471

Mac Book Pro 17 Core Duo & Leopard: Graphic/Display Glitches

Since I installed Leopard, the display on my MBP has the strangest behavior. On a regular basis it displays many graphic glitches such as horizontal and vertical black lines, some pixelization, windows don't refresh properly and so on. The MBP is also connected to a Apple Cinema HD Display and the glitches appear on both monitors. I have to restart to make them go away.
I've been looking all over the place on these forums and on the internet, and found that it looks like a recurrent problem with some ATI cards, (my MBP has the Radeon X1600/256Mb). Some people were able to fix it by installing a missing extension from ATI, but it does not seem to apply to this particular model of MBP or graphic card.
I did a clean install, zap the pram, verify the cables, nothing has fixed it so far.
While in Tiger, I have never had such a problem, so I am really wondering if anybody out there has had the same problems, and if a solution has been found. Any hints?
Thanks for your help.

I've had similar problems, now with the additional problem of frequent, unrecoverable crashes. "Freezes" may be a more appropriate term. I get strangely colord single-pixel lines across the screen both in regular browsing in firefox and when playing back video in Final Cut Pro. Sometimes these lines stay on the screen when I move the windows around, sometimes they can be "erased" by moving the window away and moving it back. I have had a very bad time indeed, and no apparent solution.

Can I uninstall leopard and install tiger without problems?

I'm considering purchasing a refurb iMac - I don't want an iMac mind you, but the Mac Pros are simply priced way over my head and I need a new computer!
I can't get a straight answer from Apple about whether it will have Tiger or Leopard on it but because of Adobe's refusal to make CS2 compatible with Leopard, I must use Tiger.
I've been told I can, if I must, uninstall Leopard and reinstall Tiger but I've also been told I'll end up with a host of problems doing that
does anyone know if this will work or not?
Apple is driving me crazy... no one will asnwer that question for me
and why they don't have a mid-range Mac Pro is beyond me but what do I know?
thank you

Hi liliths!
I look at the Apple Store refurbs list on a daily basis.
The longer you wait, the higher the chances that you will receive an iMac that was produced following Oct 26, and was therefore released with Leopard as the MINIMUM version of OS X. Currently, I'd guess that there is VERY little (almost zero) chance of that - today - but more chance as each day passes.
A refurb purchased now will have Tiger on DVD, and Tiger installed. The box will contain an upgrade disc that will install Leopard.
As time goes on, Apple will start to receive Leopard Macs (Leopard on DVD, and installed, but no Tiger) produced after Oct 26 that get shipped back from the stores after buyers have returned them. Those returns to Apple, and Apple's refurbishment process, do not occur overnight. Those Leopard Macs will not be able to run Tiger, or if they will run it, it will not be supported by Apple (no phone support/no warranty until Leopard would be installed).
Refer to this Apple Support article:
http://docs.info.apple.com/article.html?artnum=25497
There are some (lower-priced) Mac Pros sold with the slower processor option, but they are seldom seen on the refurb list, and sell quickly when do appear. One would certainly sell within minutes of being placed on the list this close to the holidays. (A good alternative at a close price w/o sales tax: eBay 250194178376)
There are others besides Apple selling the older production Macs and advertising that they have Tiger on them, not Leopard. (From a third party, I very recently purchased a Mac Pro NIB with Tiger only.) Those units will be available less and less as each day goes by. I have purchased a Leopard family pack for possible future use.
Don't wait too long to make up your mind, or the choice will no longer be available for you:) A mid-priced Mac Pro might be one of the last G5s, so you might want to look at eBay item 120191603098 (I have no affiliation on either eBay item, just a bystander).
Message was edited by: myhighway
As to the question iMac vs Mac Pro or G5 - do you already have a display for a tower? A big factor in the decision.
Message was edited by: myhighway

Is it possible to change what is displayed in the GAL in Exchange 2013

We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
[email protected] listed under email address it will now show the UPN as alias and
[email protected] for email.
I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
Is this possible, and if so how?

We have always used [email protected] for our primary email addresses, and to facilitate this someone back in the days of Exchange 2003 decided it would be sensible to use the firstname.lastname
format for our alias. This means our primary email does not match our UPN. Now, we are moving to Exchange 2013 and want to use autodiscover we find we need to change this so primary email and UPN are the same while still retaining the original email
addresses. Easy enough change, powershell script to modify the alias, new address policy on the 2013 server and migrate your users, changes made for you.
However, this has caused some concern amongst the senior management because it changes what is displayed in the GAL, so instead of the friendly first.last name listed under alias and the just as friendly
[email protected] listed under email address it will now show the UPN as alias and
[email protected] for email.
I have now been asked to see if it is possible to modify the details displayed in the GAL, I know you could in previous versions of Exchange using things like EMC, but I don't see any way of doing this in 2013.
Is this possible, and if so how?
You can use the Details Template to change what the GAL shows.
http://technet.microsoft.com/en-us/library/jj673049(v=exchg.150).aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHz

Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

(FM8p277) Crashes when saving first doc in book after changing conditional text display

That was a mouthful :-)
Okay, this happens with any of the books that I work on --- it never happened with Frame 7.
I have a book containing several documents.
The documents contain several conditional text segments.
Start new Framemaker session, open book, open all documents.
Change conditional text display (from Show All to Show Selected, or vice-versa).
From the book, choose Save All (or from the *first* document, choose Save). The following text appears in a 'FrameMaker dialog': "File <filename of first document>.fm has changed on the disk since you last opened or saved it. Someone else has probably modified the file. Do you want to save it anyway?
Click OK. All of the files save properly. (If I had clicked Cancel, the first file would be skipped and all other files would save.)
Change conditional text display again (note: this could even be for a different book at this point, I believe, but will have to verify).
(Repeat step 3): The same text appears again in the dialog.
Click OK. FrameMaker crashes while trying to save the first file. (If I had clicked Cancel, the first file would be skipped and all other files would save. However, if I attempt to save the first file afterward, FrameMaker still crashes.)
Anybody have any insight into this? Am I the only one this happens to? Argh :-)
Thanks.

Sorry, the only answers I got were on the forum and nothing worked
That being said, at least now I know I'm not crazy! (Sorry it had to
happen to you, though.)
As it stands, I've been training myself to make sure that after the
first time I toggle the settings, I do the save, and then make sure to
save all, quit, and restart FrameMaker before I attempt another toggle.
On the odd occasion that I don't do that and get the warning message, I
select Cancel (which lets the rest of the files save), quit, restart,
and then make sure I update the first document appropriately.
All the while cursing and swearing, of course
As an aside... if you find a solution, please let me know about it if
you remember.
Thanks.
John

How to change the number displaying rows in a table

Hi all,
i have a table for resources in Debrief Work order (Standard Screen), we need to change the default displaying rows. inistially it displayed 3 empty rows.
i tried to change the Records Displayed for the table but it did not affect.
also it is possible to change the "Add 3 rows" button in the table to add for example 5 rows instead?
any idea?
Regards,
Mahdi Charara

Hi,
Through personalization we can do.On standared page top right u will find personalization link.click on the clink next expand all there find apporiate table .Here u will fine reorder button set as u want display and save. then u can see the change.For add row functionality u need to extend the co.

Will migration assistant change the default display settings on my new Mac?

I just set up a new iMac and used Migration Assistant to load from my Time Machine. But now the display looks muted and not as bright. Would Migration Assistant change the default display settings on my new Mac?

Migration Assistant may not be the cause. But you should reset the NVRAM and see it that fixes the issue.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

How to make the Business Area field from Change Mod to Display Mode in AS02

Hi Gurus,
I created a Customized T-code YAS02 for making the Business Area in Display mode with the help of SHD0.
But my client wants to do the same in standard T-code of AS02 and they don't like to use the customized T-code.
Kindly advise to make the Business Area from Change Mode to Display Mode in AS02.
Thanks in advance...
regs / Devi Aparna

Hi Devi,
check the following customization
asset accounting -> Integration with the General Ledger> Additional Account Assignment Objects-> Activate Account Assignment Objects---
Regards,
Ranjith

LPA Reporting iView - Can we configure or change the table display?

Hi all...
We are using the Reporting Launchpad in MSS. It is using the LPA reporting application to display an employee selection for headcound reports, etc. The table lists employee, id, and 'P'. It is limited to 5 entries. Is there any configuration change this table display?

Hi 640,
I just checked it. You cant do it directly in Answers (the css property for the PTCOL2 is going to be the same and I'm not sure how you could assign different div id for it without going through source files). What you could do is create 2 pivot table views and put them side by side in Compound view. Might be tricky, but possible.

Change my BBM display name

I have a new Passport. Could someone please help me to understand how to change my BBM display name.
Thank you in advance
Ron

open BBM app, tap on top where name is and then tap on name to change it
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

ICS 2.x: How do I change the hour display format from AM/PM to 24 hour mode in the JavaScript?

How do I change the hour display format from the AM/PM mode to the 24 hour mode
in the JavaScript?

To change the hour display format, 

<OL>
<LI>Open the loadpoint/CalendarServer/cal/uicust/en/main.html
file.

<LI>Go to the "Misc." section.

<LI>Edit the following line: 

i18n['def clock'] = '24';
</OL>

laugh
how analog.
neat idea, but i need to see that part of the screen after login on a fairly regular basis, otherwise i might seriously do this.

Can A Boot Camp Partition Made With Leopard Live With Tiger?

If I downgrade from Leopard back to Tiger, will my Boot Camp XP partition still be bootable and recognizable?

The short answer is YES. I say that because now all driver updates are offered by apple on the WINDOWS SIDE via Apple Software Update so you shouldn't need Leopard for that. This means that downgrading to Tiger should not affect the Windows partition and its contents.
Be sure to back up everything before downgrading.
Axel F.

Resolution changed on remote display. Fan runs at HIGH speed.

Today, for no reason, resolution changed on remote display. Option needed no longer shown. Tried SMC and PRAM resets. Now resolution on the MAC AIR is messed up (not full screen) and the fan runs at HIGH speed. This is a sudden change. Have been using the MAC Air in this exact configuration for 2 years. Tried restart/reset of monitor. Nothing. Did resets on MAC and screen changed there. Also the fan runs at high speed.

Hi donaldfromsaint charles,
It seems you are experiencing an issue with displays and their resolutions. The following article provides troubleshooting guidance which may help you find a solution:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Change Leopard to display Tiger's dock.

Similar Messages

Maybe you are looking for