Change Line Label

We are using this unit with 4 PSTN trunks.
How/where do I change the default line name on the phone from fxo1, fxo2, etc... to something of my choosing?
I already named the lines/trunks in the "hardware" and "extrensions" portiosn of the UC320W admin.
Thanks

Hi Brian,
Did you mean the caller ID of the incoming call shows fxo1, fxo2 on the phone LCD? If yes, please connect an analog phone directly (bypassing UC320W) to the phone line to see if the caller ID can be shown. If yes, please run impedance matching tool at the Line(FXO) Ports page, and also check if the Rx gain has been increased on the FXO port and try to lower the value to see if it resolves the issue.
Best regards,
Wendy

Similar Messages

  • How do i change axis label object type from label to text? (to allow wrapping)

    In the example of a barChart, how does one change the LABEL type from "Label" to "Text"?
    I am trying to allow for long labels to wrap (ie. multi-line labels), but the default object type of labels is "Label" (which are single-line only).
    I have been researching this issue all day, and have enountered a similar situation for changing the Legend component labels where a method override is implemented in a custom itemRenderer.
    But I have not been able to figure out how to do this for an Axis label.
    Any help would be greatly appreciated!  
    J

    Yes, thank you.  I am aware of the AxisRenderer.... but I'm not sure how to implement it to change the label type from "Label" to "Text" to allow for wrapping.
    I guess what I'm looking for is a good example....  

  • Is there any way to change the label of my VO attributes

    hi ,
    Is there any way to change the label of my VO attributes so that it will have more logical presentation
    Thanks
    Musahib

    Hello Alex,
    I 've just checked my webbeans and the COLUMN_NAME_LABEL property is not use by the EditCurrentRecord, FindForm and RowsetBrowser webbeans.
    I had the following line to my custom EditCurrentRecord, FindForm and RowSetBrowser.
    So I can set Column display name ones for each webbeans.
    It's better than do it with different methods for each webbeans!!!!
    if((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL") != null)
    rField.setPromptText((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL"));
    In the ViewCurrentRecord something was done but with errors. Oracle Developers used getName() method instead of getColumnName()!!! So I rewrite it.
    if((String)qView.getProperty(attrs[attrNo].getName() + "_LABEL") != null)
    sHeader = (String)qView.getProperty(attrs[attrNo].getName() + "_LABEL");
    Hope this will help!
    Email if you need more.
    [email protected]
    Jean-Nokl

  • CCME 4.0 and DN line Labels

    Is it possible for an ephone button to monitor another users line but have a different line label that what is on the ephone-dn. Example user at extension 4913 has an ephone-dn with label of 4913. Receptionist want to monitor that ephone-dn but wants the button on her 7914 side car to say John Smith instead of 4913. If you change the label on the ephone-dn it also changes it on the end users phone as well.
    Any suggestions.

    This should work for you. Of course it's probably quite a few changes from your classic shared line.
    ephone-dn 1 dual-line
    number 4913
    name John Smith
    no huntstop
    preference 1
    ephone-dn 2 dual-line
    number 4913
    label John Smith
    name John Smith
    preference 2
    ephone 1
    button 1o1,2
    ! John Smiths phone
    ephone 2
    button 7o2,1
    ! Receptionist phone representing only the button in
    ! question. Used 7 as an example.
    By making it an overlay with two shared lines, the ephone-dn 2 is added to button 7 first so the label command takes precendance over the default label. Vice versa ephone-dn 1 is the first dn on the overlay on ephone 1 so the default label should appear.
    This is all in theory and I haven't tested so you might want to try with some test phones. Additionally I was making some assumptions with the dual line and the shared lines. I just noticed though you said monitor, so I don't think you can monitor with overlay lines. Still gonna post anyway as you might not have meant Monitor literally.
    Thanks
    Fred

  • Printing of changed line item in scheduling agreement  smart form.

    Hi experts,
    I am facing problem in printing of changed line item in schedule agreement.
    can any body tell me how to find the line item has been changed through programming?what is the procedure to fetch the data for new line item.its
    very urgent for me.
    Please help me in this regard.
    Priti Shrivastava

    Hi
    with the help of  T180-TRTYP field you know if that doc has been changed or created.
    If it is not equal to H it is changed. H means created.
    pass the TCODE of Sched Agreement and check this field.
    You can use the CDHDR and CDPOS table s to get the changed values of new item.
    Reward points if useful
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • Changing the label of TOC to another language in Captivate 7

    I am using Captivate 7 and created a number of English Projects.  I have translated these English files to French (by exporting/importing captions), changed the voices, etc, etc.  All is now in French in the project except the title of the Table of Contents when enabled.  I have already changed the labels in the table of contents for things such as Slide Title, Duration, etc by creating the TOCStrings.ini file and copying it to my root folder - that works as described in other posts/blogs. However, I am unable to change the Heading/Label of "Table of Contents" to French. 
    Is the TOCStrings.ini file the place to change the label of Table of Contents to French?  If so, what string would I add to the file to make this change happen?
    Can someone please let me know where the change can be made (if not in the TOCStrings.ini) or if the change is even possible? 
    Thank you!

    If you enter data in the Info fields of the TOC, the indicator 'Table of Contents' will automatically be replaced by the Title field.

  • Changing the label of a field in SAP GUI

    Hello SAP Guys,
    I would like to change the label of a field in SAP GUI.
    I already did it internally because for that field the Shor Text of the label changed:
    I went to SE11, and wrote down the appropriate data element, through Translation I changed the entries of SCRTEXT_L, SCRTEXT_M and SCRTEXT_S and activated this change after saving.
    It is very strange that after making sure that the
    Short Text of that field was changed, I went to trx BP and I could see that the label didn´t change.
    I´ll appreciate any help you can give me,
    Regards,
    Efrain

    Hi Efrain,
    Can you tell me in which screen did you make the screen.
    Moreover the changes are not reflected immediately.
    What you can try is to create a new record of the transaction in which you changed the label and save the recore. After this try to close the session and reopen the transaction and this should work.
    The reason is the label on the screen are not picked up from the data element everytime but from buffer. So when you create a record this updates the database table entry and can also refresh the buffer.
    I had the same problem in BP transaction and the above solution worked.
    Let me know if this helps.
    Jash.

  • How to change the label of a total column in pivot view

    Hi
    Is there a way to change the label of the column created by analytics when calculated row based totals? Currently, it is same as the measure label to be summed.
    Thanks

    Hi
    Thanks for your help, actually that option works for the total displayed as the latest row, I mean the label for the total row. However, for the total column, the name stays as the same as the measure label.
    Can you further help me on the issue?
    Thanks

  • When printing mailing labels from Contacts how do I change the label size?

    I want to print mutliple labels from a group in Contacts. I can print 20 labels per page but I want to print 14. I have tried every option in the pop up window but nothing lets me change the label size, 

    Hi 786menzies,
    Welcome to the HP Support forums.  I understand that your print jobs from Photosmart 5520 seems very small.
    The font size is controlled by the software program that the document was created in, for example any Microsoft Word document that you send to the printer the font size would have been chosen in Microsoft Word.  I've included two different documents on how to change the print settings; one for Mac and one for Windows 8.  These documents will show you the process on changing print settings if not the actual steps as you may not be using one of the operating systems mentioned.
    Changing Print Settings in Mac OS X
    Changing Print Settings in Windows 8
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to change a labels text which created at runtime?

    hi,
    i am creating label controls in runtime dynamically and adding them to a group component. this group component is in another custom component and i have lots of custom comp. in my app.
    my question is how can access (via id) and change a labels text whict created at runtime?
    i can change like this but i am setting id's and want to reach via id.
    var lbl:mx.controls.Label = mx.controls.Label(subMenu5.group_subMenu5.getElementAt(1));
    lbl.text = "good job";
    thank you, have a good day.

    First off, if you are already using a Spark Group, I would suggest you use a Spark Label instead of an MX Label. If you want to reference the Labels from the group, loop through the group's elements and check the if the element id matches the Label you want to assign text to.
    var lbl:Label;
    var n:int = myGroup.numElements;
    for (var i:int = 0; i < n; i++)
         lbl = myGroup.getElementAt(i) as Label;
         if (lbl && lbl.id == "myLabel")
              lbl.text = "newText";

  • How can I change the label of iCloud mail in Mail?

    I have an iPhone, where the iCloud account in mail is shown as "Name @ iCloud". I've just been setting up a new iPad Air 2 and there in Mail the label shows just as "iCloud". How can I change that label? I've been digging around but haven't found a way.

    Most of us just use names for the folders which seems to work fine unless you're not alphabetically inclined.
    It really doesn't make much difference who else may want a feature like that, it still isn't going to magically appear. If you wish to submit it as a feature request you can do so here: Feedback.
    There aqre third-party programs that may provide a similar function although not colors: DockStar and Mail Badger.

  • How to Change the label names in crmd_order

    HI Experts
    in CRMD_order transaction i want to change the lable names to the following Standard labels is it possible?..
    the standard label names are
    Standard Label name proposed label name
    Sold to Party = XXXXXXXX
    Requester = YYYYYYY
    Change Manager = AAAAAA
    Change Advisory Board= BBBBBBB
    I have found one link in sdn,To change the label Names But I am not able to find data element name.
    Kindly provide me  your valuable guidance on the above issue.
    Thanks in advance
    Thanks & Regards
    Anand

    Hi,
    it looks like you want to change the names of the partner functions.
    You can do this in the customizing, for example using SPROScenario Specific SettingsService Desk-Service Desk--Partner Determination Procedure (This one works for both ChaRM & Service Desk).
    The standard procedure in your case would be SDCR0001.
    The recommended way is to define your own Z partner functions and assign them to your own Z Partner Determination Procedure, which you have to replace in the configuration of your transaction type.
    Regards,
    Christoph

  • Views in MM03, how can I add fields and changes fields labels

    Hi !!
      I need to change some labels that appear on Sales: Sales Org  2 (view on MM03, MM02..MM01)...
       Im not sure what I can do this.. Im an ABAP Programmer(beginner) and I know how I can change labels of fields in programs(reports) that I did...but in This case. I don't know what I can do...
       example: when I enter on MM03..I select differents views(including Sales: Sales Org  2), later I specify  sales Org and distribution Channel (I need to specify this information for see these fields on this TAB Sales: Sales Org  2).
      When I access in tab: Sales: Sales Org  2, I can see one Group that it's called
    Material Groups that contain two fields called MVKE.MVGR1 AND MVKE.MVGR5... I saw in the screen these fields with the description from each field..example:  Material Group 1 (MVKE.MVGR1 )... I would like to know :
    1.- How Can I change the description Material Group 1 (in this screen) by other description (example: material test)...
    2.- How can I add more fields in this group...example..If I need to add MVKE.MVGR2 ..??
      I will appreciate your help!!! 
      I will give you points for your answer
    Alice

    Hi Alice,
    And do I need to change in this section too.... SPRO -> SAP Reference IMG -> Logistics general -> Material master -> configuring the material master -> ...
    If I need to add some values???
    After you made label changes on custom screen then you need to go configuration (Define Structure of Data Screens for Each Screen Sequence) to replace the standard SAP screen with custom screen. You can also do testing for custom subscreen as well.  Give it try.
    And how about If I move this screen??...is it dangerous??...or how can I know if this screen affect other section of programs?
    I do not understand your questions. Can you elaborate more?
    Regards,
    Ferry Lianto

  • How to change a label of User Type in OIM 11g

    How to change a label of User Type in OIM 11g. If we have to change label of First Name or Last name then we can change in User.xml and some in resource properties file but what is the procedure to change for User Type.

    Follow this: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/uicust.htm#BABDEGFE
    i .Copy the $OIM_ORACLE_HOME/server/apps/oim.ear/admin.war/WEB-INF/lib/IdentityTaskFlow.jar to a local work directory, unzip it and locate UserAttributes.properties at /oracle/iam/resources/IdentityTaskFlow.
    ii. Update the userAttributes.properties file in the IdentityTaskFlow.jar/oracle/iam/resources/IdentityTaskFlow and create a new IdentityTaskFlow.jar
    iii. Copy the updated IdentityTaskFlow.jar to $OIM_ORACLE_HOME/ server/apps/oim.ear/admin.war/WEB-INF/lib/
    For "User Type", try putting the property name as "user_type" or try "role". One should work.
    HTH,
    BB

  • BAPI_PO_CHANGE Changing line Item

    Hi All,
    My requirement is like this I need to changed line item of a purchase order using BAPI_PO_Change is it required to pass header data other than po Number?I have to change only the Batch Number(POITEM-BATCH) can some body throw some idea on this?
    Thanks&Regards
    Mahesh

    Hi,
       PO number may solve your purpose. Just try filling
       PO number in your BAPI header structure and
       relevent field for your batch number.
    Regards
    Amole

Maybe you are looking for

  • Why won't it allow me to purchase any apps ?

    My iPhone allows me to download free apps but not purchase any, what do i doo?

  • IC Webclient - How to integrate in Portal? (CRM 7.0)

    Hi, I like to integrate the CRM IC webclient UI into the Portal. I managed integrating with 'normal' CRM Business Roles (ie Sales Profesional) using the guide in SAP Help where you export the business role and then upload into the Portal where it gen

  • IIS Blocks pages with a session ID

    [This followup was posted to weblogic.developer.interest.plug-in and a copy was sent to the cited author.] Hello, I'm having problems trying to get IIS to proxy page requests, which have a session ID in them, to a WebLogic 6.0 Server. For example, th

  • Corrupt RAW files in Lightroom 5.

    I'm having an issue with corrupt RAW files in Lightroom 5. I have all of my RAW files stored on an external NAS system. Typically, I mainly work on my files on my PC's hard drive. The NAS is for storage only. However, in the past I have looked throug

  • Aperture (and entire iMac) hangs brushing adjustments while zoomed in

    This problem is almost 100% repeatable on my iMac running Aperture 3.0.3. I've been working on brushing in various details on a photo (mainly blurs, sharpening and some level adjustments) and in some cases I've need to zoom in tightly (200% or more)