Change "Loading Data" font in Search function

Hello RH fans,
(Using RH7) Can I change the font of the "Loading Data..."
message that comes up when I initiate a Search?
Thanks

So...
I backed up my phone on two pc's. I did soft/hard boot and fiddled with wi-fi and data settings but nothing else worked.
What DID work however was... Simply clearing space... O_o o_O
I didn't record capacity because I believed it was unrelated, and I know for a fact I wasnt at Full capacity as I do video blogs and must always have space to reocrd... I also do not use iCloud for that reason.
But so far, the only difference I have seen, and the only reoslution to the issue was clearing space by deleting photos and video... O_o
Maybe the local cache or something can't allow for data pulls if there's not enough room?
Or possibly the iTunes Gods just smiled on me today, and the tiny tiny evil Loading Wheel Minions were banished.
Steak for everyone!

Similar Messages

Changing Loading Date

Dear All
Pl let me know the process of changing "Loading date" and appering in Open Sales Order Report ( T Code VL10 )
Regards
Ramesh Barve

Hi
I tried VA02 and all other steps as suggested by you. But it is not working. I can not change Loading date as per your suggested way.
Anyways, thanlks for showing interest and replying my query.
Regards
Ramesh Barvee

How do I change the highlight in Preview "search" function?

I find Preview is a great app for reading PDF documents, I prefer it to Adobe Acrobat most of the time. It also has a useful and fast Search, but .... the highlighting of found Search items in the document is USELESS!!! It is pale grey, which - when most documents are black text on white background, and with a lot of text crammed on a page - is almost impossible to see!
I have tried Preview Preferences. I have tried System Preferences (but Preview, sadly, doesn't use SysPrefs highlight colour). How can I change the Preview highlight colour so that Search becomes a useful function instead of causing me eyestrain?

Thank you for the quick reply, however, if I understand correctly your link is helpful for Character Fill Color, not highlights.
Please find the quote below in this link:
http://support.apple.com/kb/PH15379?viewlocale=en_US
"Note: Text that you highlight by adding a color behind it (in the Format inspector) isn’t tracked in the review toolbar."

Any search function for notes in iPhone

Hi, Apple Fans:
Does anybody knows how to search in "notes" section in iPhones? I really need the search function to look up the notes I jut down there.
Right now the notes are arranged by dates but no search function.
if it hasn't be invented, it should have.
BIgApple1980

Use the Spotlight search function on the phone. You activate this from the home screen by swiping downwards from the middle of the screen. All you need to do is make sure that you have Notes checked in the Spotlight search options in Settings. Go to Setting>General>Spotlight Search and make sure there is a checkmark by Notes.

Loading date

hey all
is it possible to enter in SAP a fixed day of
the week when material should be loaded for a specified destination.
For example all orders for Japan should be loaded on a Tuesday.
Would it be possible to enter this information in SAP to take it into account when the loading date is calculated?
if yes, where we can maintain this date.
please provide me the detail info regarding this

I think we have this option for creatign billings on specified dates( fixed date).
But not for loading,
and i think practically this may not happen.
like: "Every tuesday all japan orders should be loaded- "
every tuesday you may/may not have the deliveries to load.
still client requires, as abhinay said- we should customize the sap programm.
in my previous project, user is not allowed to change the loading date in delivery( while creating/ change mode)
he has to use Tcode:ZVA02 to change loading date which will reflect in delivery.
the purpose of this Z* tcode is restrict the users not to change the loading date.

Having problems using search function on FM forum; no results ever found

I've done searches on topics that I know exist, but I never get any results. I never used to have this problem. Did something change?

fwiw, the forum search functionality (within forums as well as over all the forums) seems to be having issues over the last several weeks. I haven't had any search results for several weeks, tried 3x different browsers.
There's a discussion about it in the Forum Comments section:
"Is the forum search broken"
http://forums.adobe.com/thread/823088?tstart=0

Change data element in search help

Hi at all,
how can i change the data elemte of an parameter in the search help?
The selektion method of the search help is a view and the data element comes from the DB.
Maybe it is possible to change the length of the parameter in the result list? That would help, too!
Thanks in advance.
Regards

Alexander,
see this code bellow:
REPORT zsearch.
TYPES:
BEGIN OF ty_scustom,
id   TYPE scustom-id,
name(8) TYPE c,
END OF ty_scustom.
DATA: wa_scustom TYPE ty_scustom.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
SELECT-OPTIONS s_name FOR wa_scustom-name NO INTERVALS OBLIGATORY.
SELECTION-SCREEN END   OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_name-low.
PERFORM f_select.
*&      Form f_select
*       text
FORM f_select.
TYPES: BEGIN OF ty_data,
        name TYPE scustom-name,
        END OF ty_data.
DATA: tl_data TYPE STANDARD TABLE OF ty_data,
        wl_data TYPE ty_data,
        tl_return TYPE STANDARD TABLE OF ddshretval,
        wl_return TYPE ddshretval.
SELECT name
    FROM scustom
    INTO TABLE tl_data.
CHECK sy-subrc = 0.
SORT tl_data BY name.
DELETE ADJACENT DUPLICATES FROM tl_data COMPARING name.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
*   DDIC_STRUCTURE         = ' '
      retfield               = 'NAME'
     value_org              = 'S'
    TABLES
      value_tab              = tl_data
*   FIELD_TAB              =
     return_tab             = tl_return
EXCEPTIONS
      parameter_error = 1
      no_values_found = 2.
IF sy-subrc = 0.
    READ TABLE tl_return INDEX 1 INTO wl_return.
    CHECK sy-subrc = 0.
    s_name-low = wl_return-fieldval.
ENDIF.
ENDFORM.                    "f_select
Is it helpful? In search help show full name, but in parameter, only 8 first chars. Is it what you want to do?
Regards,
Rodrigo

Process chains for loading data to target is not functioning

Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
Soujanya

Hi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V

Delta load after upgrade to 2004s - Functional changes

Hi All,
I have some doubts about Delta using DTP.
Our BI landscape has been upgraded to 2004s from 3.1 (technical upgrade). There are many existing delta loads and we cannot afford to mess anything at all. So my question to you all
When we do a functional upgrade...
1. The existing delta from 0FIL_GL_4, AP_4, AR_4, WBS_6, NWA_2 etc all having delta loads right now and go to DSO. The records are in many millions. It is highly unlikely they will allow me to delete the PSA and reload all, because it will take couple of months. So that is out of the question.
We have 3 situations.
1. Delta from Data Source into DSO.
2. Delta from DSO to Cubes
3. Delete from few Cube to Cube.
Questions
1. After converting from Info Package to DTP I will still load the delta from Data Source to PSA, but the data source need to migrated to 2004s. WIll it cause any issues in loading delta data?.
2. The DSO to further targets are using delta info package, I believe I change the info package to DTP with load mode selected as DELTA. Is this correct?
Thanks in advance.
Alex.

DTP is used to load data only from PSA to Datatargets and DELTA DTP Loads the last PSA request which was transferred to PSA from source.
So 2 plausible ways could be -
1)Delete all PSA data and so your DELTA DTP will get the DELTA load only or new changed posted to PSA only and not all the previous requests ..but you may not want to delete the PSA now.
2)Fake the DTP using some infoobject FILTER selection criteria as blank which acts like INIT w/t data transfer and then do DELTA DTP as mentioned below -
https://forums.sdn.sap.com/click.jspa?searchID=10026965&messageID=4743634
1. After converting from Info Package to DTP I will still load the delta from Data Source to PSA, but the data source need to migrated to 2004s. WIll it cause any issues in loading delta data?.
NO
2. The DSO to further targets are using delta info package, I believe I change the info package to DTP with load mode selected as DELTA. Is this correct?
YES
Hope it Helps
Chetan
@CP..

BAPI Function for EG70 change rate data

I am searching a BAPI function which can perform the function of EG70 (change rate data), ie, update the RateType and Fact Group is each register under an installation and device.
Can anybody helps? Thanks very much and point must be rewarded.

Hi,
ISU_DB_EASTL_RATETYPE_SELECT - Use this for selecting rate type & fact group.
ISU_DB_EASTL_UPDATE -Use this to update rate type & fact grp at device level
ISU_DB_EASTS_RATETYPE_SELECT - Use this for selecting rate type & fact group at register level.
ISU_DB_EASTS_UPDATE-use this to update rate type & fact grp at register level.
Two tables are updated by EG70 EASTS & EASTS,you can search any FM from SE37 by ISUEAST
Hope this helps.

Anyone know how to change the default font for the new pages? Apparently it does not even come up when I search the 'Help' section of Pages. The level of incompetence in this new version seems breathtaking

I cannot find how to change the default font in the new Pages. It does not appear in the Help area when I search for it. I am never sing Helvetica for my standard documents and cannot seem to change it. What am I missing? And why does Pages help not have an easy answer?
dan

You open a blank template and change the font to you liking. Remember to also get all the styles changed with new font. Then Save As Template. Now you have a template with the font you like.

How do I change the default "date range" when searching in the forums?

Hi all,
New to the SAP forums... How do I change the default date range when searching in the forums? I am getting a 90 day search by default. Then I have to change it and search again. Argh!
Thanks,
--Amy Smith

Hi Amy,
the default date range cannot be changed by users. It is defined system-wide.
Regards,
Michael

How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found way to search metadata inside or out of Elements.

How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found way to search metadata inside or out of Elements.

How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found way to search metadata inside or out of Elements.

Function module to change the date format

hi guys
is there any function module to change the date format
from 08/28/2007(mm/dd/yyyy)
to August 28, 2007.
regards
vamsi

hi vamsi.,
Use CONVERSION_EXIT_SDATE_OUTPUT to get the month name,
but it will give short form of the month name.
if you want long description of the month,
use this peice of code.
PARAMETERS: V_DATUM(07) TYPE C. "(example input:12-2007)
DATA: V_MON(2) TYPE C,
 V_YEAR(4) TYPE C,
 V_MONTHNAME(10) TYPE C,
 V_FULLDATE(30) type c.
WRITE V_DATUM+0(2) TO V_MON.
SELECT SINGLE LTX FROM T247 INTO V_MONTHNAME
WHERE SPRAS = SY-LANGU
 AND MNR = V_MON.
CONCATENATE V_MONTHNAME v_datum+3(4)
 INTO V_FULLDATE SEPARATED BY SPACE. "(example output : December 2007)
 write: v_fulldate.
Reawrd points if useful
Chandra

Function Or BAPI to Change BP Data

Hi All
We need to change the value of a field Classification of the BP after we create a Quotation, but we are not able to find the function to do it.
Best Regards.

Hi Kamal,
Unfortunately I can not see any BAPI which changes operation data of a production order.
BAPI_PRODORD_CHANGE is available only for changing header details.
BAPI_ALM_ORDER_MAINTAIN and IBAPI_ORDER_OPERATION_CHANGE are used for changing maintenance or service orders, and not production orders, most probablty this won't work or cause issues.
I'm afraid BDC is the only option in this case.
Regards,
Marcelo Pacheco

Change "Loading Data" font in Search function

Similar Messages

Maybe you are looking for