Change log and Patch notes

Hi,
Could anyone help me to a web page or document like there is with flash of the changes in the versions.
like new fetures, change log, patch notes, release notes.
with flash we've got several of those pages like:
http://www.adobe.com/products/flashplayer/features/
and
http://www.adobe.com/support/documentation/en/flashplayer/
I can't find it for shockwave.
Thanks in advance,
ClasH

I have a 3.x object on an upgraded BW System to 7.1 . It looks like to (still) delete both requests (change log + PSA) while executing the Change log deletion request. My point is: Inside the Process chain may I leave just the Change log request's deletion process and remove the PSA deleteion step or do I have to stay and exute both steps aniway?
thank you,
Alessia

Similar Messages

Difference between Delta "Change Log" and "Active Table (Without Archive)"?

In BI7.0 environment, we perform our Delta loads (the DTP settings under the Extraction tab, there is a field called Extraction Mode and it's value is selected as "Delta") every day among all our DSOs.
There is a section called "Delta Init. Extraction From..." under the same tab in DTP, there are four radio buttons:
Active Table (With Archive)
Active Table (Without Archive)
Archive (Full Extraction Only)
Change Log
Then what is the difference between "Change Log" and "Active Table (Without Archive)" if both Extraction Mode is "Delta" for two Delta loads?
Thanks!

Hi ,
The new options SP16 has are:(Chk Note 1096771)
Active Table (with Archive)
The data is read from the active table and from the archive or from a near-line storage if one exists. You can choose this option even if there is no active data archiving process yet for the DataStore object.
Active Table (Without Archive)
The data is only read from the active table. If there is data in the archive or in a near-line storage at the time of extraction, this data is not extracted.
Archive (Only Full Extraction)
The data is only read from the archive or from a near-line storage. Data is not extracted from the active table.
Change Log
The data is read from the change log of the DataStore object.
Delta will always be picked from change log table.Only during intialization you can choose between getting data from change log or active table.If you are doing the load first time and are initializzing delta in subsequent data targets, then pulling data from active table will get lesse volume of data then it would have got from change log table....All subsequent deltas will be picked up from the change log. And when we need to reload data into the data target (which would be a full load) - we use active table.
From change log : you can take below ones as targets
1) Cube 2) DSO with Addition as the update for the Keyfigures
From Active table: you can take below ones as targets
1) Cube ,if and only if, the records are never changes in the source once after creation
2) DSO with Addition as the update for the Keyfigures ,if and only if, the records are never changes in the source once after creation
3) DSO with Overwrite as the update for the Keyfigures ( incase deletions is not happening in the source system)
Pls check this link
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/e8c56ecd313c86e10000000a42189c/frameset.htm
Regards,
CSM Reddy

Screen changing colours and does not start

hi, when i turn on my macbook, the screen changes colours and does not start. Please someone knows how to solve this problem?

you need to take it in for diagnosis, that is beyond the scope of this forum.

Log and transfer not changing frame rate to slow motion on P2 cards...

Hello.
I swear I have done this before on final cut studio 2 and it came out correctly, but for some reason this time, either myself or the computer is making an error. (chances are it's me).
Basically, I'm logging and transferring footage that was shot on P2 at 50 fps, and my intention is to import it at 23.98 fps. I thought this is something that naturally happens in the log and transfer process, but i guess not?
My project was set up via easy set up at panasonic dvcproHD frame rate 23.98... and I'm logging an d transferring directly into my browser but the f frame rate stays at 50 fps. (footage was shot in England to be incorporated into a video already shot in America).

I thought this is something that naturally happens in the log and transfer process, but i guess not?
Your guess is right...it DOES NOT slow it down upon injest. ONLY if you set the camera up to shoot 720p25 and then choose the 50 frame rate (I hear this is what you do...I am not a camera guy, so...), then it will import slowed down. But you have to set the camera up CORRECTLY. The first time I imported slow mo, it was 60p...and I had to use the Frame Rate Converter to slow the clips. Then my camera guy figured out the setting in camera and BOOM...there it was.
So...I guess you are NOT wrong...actually. It just needs to be set up IN CAMERA in order to do what you want.
and I don't know if the Frame Rate Converter works for PAL footage...stupid, but...no...Stupid.
Shane

Change log report S_AHR_61016380 not picking IT0025

Hi Experts,
I need the change log report to capture the details of changes made in IT0025 (Appraisals).
I have made necessary configurations to the below tables by watching in other SDN threads, but still my problem is not solved.
Also made changes to master data (IT0025) and tested, but still no use.
Log report is not picking changes made to IT0025.
Please suggest
Thanks
Venkatesh

Dear Expert,
for logged changes in infotype report we need to install crystal report.
please suggest.

NWA - Logs and Traces Not available

Hello All,
I am unable to view the logs and Traces , When I am accessing it through NWA
for example http:
<server>:<port>\nwa ...... In Monitoring --> Logs and Traces --> when I select Default Trace , Its asks me for the setting up the data source , We select the data source and click on Apply . But the view still persists. On the server level, We can see the trace files. But on the NWA I am unable to.
Can share some thoughts on this as for the reason and the resolution for the same . So that I can view the traces in NWA.
Regards,
Ronniee.

Dear Ronniee
It will come like that way. If you do not want to show then collapse the tray (Right side Rectange box)
Once you open the Default Trance > Click on "Open Search" and here you can search with any options.
OR you can directly access with URL /irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.admin.logviewer.default it will only work if you login and then change the url as metioned above. You can search with FIRST Search option, it will check the all the available logs. You can metion "last day(s)" for searching latest result log.
Hope it will helps
Best Regards
Arun Jaiswal

LOG AND TRANSFER not working after upgrade ...?

Hi ..
I am running FCP 6.0.5
I am using Mac OSX 10.5.6
I've been using the 'log and transfer' window of FCP for the past few months without any trouble ... until today.
Every time i transfer the clips everything appears to go smoothly, but then when the 'transferred' clip is played back there is an odd 'jumping' or 'glitching' ... IE: the resulting footage is definitely NOT usable.
The only thing that i can think of that's changed is the fact that I upgraded the software last thursday and i probably hadn't transferred any footage since then. Is there an FCP conflict with the latest quicktime or Itunes upgrades?
I have tried re-transferring some clips from last week before the upgrade and the transfers now have the glitches.
I need this working as soon as possible! I have deadlines! Anyone who can help it would be greatly appreciated.

To cut unwanted parts off MTS files losslessly, try final mate for mac. That is the tool to help cut or trim MTS and still export MTS without any quality loss. Look through this blog to know how to make it done.

Log and Transfer not working with Sony AVCHD camera

Hi, I have a new Sony AVCHD camera. The HDR-XR200 120GB hard drive model. It captures in 1920x1080i, and connects to Mac via USB.
FCP does not recognize the camera when I open the log and transfer window.
Can someone help me with seq setting and easy set up setting or other setting for it to work.
I am happy to import footage into FCP with AIC or prores 422. Just want to edit all the footage I have of my so's international soccer tournament held in Australia last week. I also have Final Cut Express on my Mac if that works better. This is very frustrating trying to get it to work.
Cheers
Bryan

I use a Panasonic AVCHD, which FCP doesn't recognise. Anyway I've spent months playing around because this little camera blows my Sony V1 out of the water in sheer quality.
Best thing is just get hold of a copy of Toast 10, you can then simply drag your .mts files into this and encode to whatever you want, I edit in pro res LT, but Toast will even encode it to HDV if you want to end up on tape(Even this result still blows the Sony HDV apart)
FCP is very fussy about even noticing the very existance of .mts files, so I wouldn't waste my time, scratching my head.
By the way, I use Firewire 800 drives, not USB 2 and also in the name of God BACK UP YOUR MTS FILES ON A NEW HARD DISC CALLED "BACKUP OF .MTS FILES!" LOL

My ipod touch's screen is changing colors and will not respond to the buttons

my sisters ipod touch is a 4th gen and the screen recently started changing colors, it does not respond to the buttons and will not turn off. should i wait for the battery to die then charge it. she said it started happening when she was charging it. could it be the charging cable? i do not know what OS it has.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

FCP Log and Transfer not Recognizing .MTS

This is weird. Two weeks ago I received a bunch of MTS files and brought them into FCP 6.0.6 with Log and Transfer. Today I received a bunch more and opened FCP to log and transfer the files and now FCP won't recognize them I haven't changed anything to my knowledge. Any more troubleshooting ideas? I have clipwrap and that works but I have an outdated version and I guess upgrades aren't free so I only have the free trial version. Anyways, log and transfer worked great and now this problem!?
Thanks in advance!
Tim

FCP can recognize MTS video files as long as you have the whole file structure.
AVCHD->BDAV->Stream and something like that.
If you indeed just have single MTS video file, you have to use a MTS Converting software.
Hope my info helps.

Log and transfer not recognizing my p2 cards

I have been off my computer for a few weeks and I just went to upload data from my p2 cards and log and transfer will not recognize them. I copied the card contents with the text docs into folders on my desktop to do the transfer and the Log and Transfer still did not work.
Last time I had problems with this was a quicktime update, I have updated since and it worked fine until now. does anyone have any experience with this problem or have I just messed something up? I am running FCP 6.0.4.

Do you have FX Factory installed? Version 1 and 2...and the demos...interfere with import. Either remove it or update to 2.0.1 and that will fix it.
Shane

Log and Transfer not working after reformatting computers

I have taught with FCP for years. This year, tech services reformatted my computers. Since they were formatted, Log and Transfer does not work with my Sony Handycam. A couple computers that have not been reformatted still Log and Transfer with no problems. The only difference I can find is that the newly formatted computers are running OSX 10.6.8. The computers that still Log and Transfer with no problems are running OSX 10.5.8.
I don't know if that is the problem, but would appreciate some direction here.

To cut unwanted parts off MTS files losslessly, try final mate for mac. That is the tool to help cut or trim MTS and still export MTS without any quality loss. Look through this blog to know how to make it done.

Importing 60i footage using log and transfer, not working :(

Hi, when I import my 60 fps footage in to Final Cut Express using the log and transfer method (because the footage is AVCHD) it always changes the frame rate to 29.97 even if the frame rate is lower like 24 fps. I need this to be 60 frames per second because I'm working with a slow motion shot and need to get the most frames from the footage.

Thanks, David,
We had done all of those little tricks to no avail... but we did figure it out.
It turns out it was a corrupted sequence that was causing the problems.
Trashed the sequence, now everything's happy again.

Log and Transfer not working at all

I'm really frustrated by the Log and Transfer procedure. Does it actually really work?
I have some HiDef video on an SD card, (no mixed media, just the video files) and the Log and Transfer option WILL NOT bring any of the files in. They are all AVI files, 720p, readable/playable by QuickTime, even readable and usable by FCE if I drag and drop each file, although to watch it without stuttering, I need to render it. The video is from a D-SLR (Pentax K-x to be exact)
But I want it in a native format so after it brings it in, I don't need to re-render it every time I move or trim it .0001 seconds in one direction.
When I try and do the Log and Transfer procedure, I get the error message that :
"xxxx contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
No support for 720p AVI files? Seriously? That just can't be right.
I have tried selecting the top level mounted object as well as selecting various directories drilling down into the card's data. Same error message every time.
I have also tried selecting various "Easy Setup" configurations. None made any difference what so ever.
The manual seems to suggest that you just select the media object and the magic happens. What the heck is going on? Any ideas?

Hi -
FCE currently supports 3 types of media directly:
!http://www.spotsbeforeyoureyes.com/FCEOpenTimeLine.jpg!
The latter two types, HDV and AVCHD it supports by converting the video format to Apple Intermediate Codec (AIC) during the ingestion process.
The video that your camera makes is none of those formats, so you will need to convert the video to a format that is usable in FCE natively. This is why you are unable to use Log and Transfer. In order to use Log and Transfer, you would need to have video that conforms to the AVCHD standard.
You can manually convert your video files by downloading MPEG Streamclip (free) from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
and converting your video to AIC 720P.
Then use easy set up in FCE for HDV 720P and manually import your files by going to the menu File > Import, or simply dragging the files from the finder to your FCE browser.
You don't mention what frame rate you camera shoots at, but FCE only works with standard broadcast frame rates (29.97 fps), so it won't be able to use 24fps material.
You would need to use Final Cut Pro to natively support that.
Hope this helps.
MtD

AVCHD log and transfer not on iMac, but does well on MacBookPro

The same raw AVCHD data on the same external harddrive can be easily logged and transferred on my MacBookPro (2006), but not on my iMac (2009). I tried it both with FCPro 6 and FCExpress 4, latest versions.
Are there some hidden conditions or settings to be taken care of???

Try uninstalling and then reinstalling FCP, and then updating fully. Use the FCS Remover from Digital Rebellion:
http://www.digitalrebellion.com/fcs_remover.htm
Something isn't working right, or is missing.
Shane

Change log and Patch notes

Similar Messages

Maybe you are looking for