Change Log For CU60 ( Variant Table )

Hi All,
It has been found that if any entry is added/deleted/modified from a Variant Table (Transaction CU60), no
change log is found through any standard transaction.
We even tried using Transaction AUT10,Table CDHDR/CDPOS but  requirement not met.
Kindly advise on the solution.
Thanks
Stuti

Hi Stuti,
Why dont you try using change number, as i remember when we go to CU60 there is option to key in change number.
and i hope using change number it will capture history.
try out and come back.
Thanks
Ritesh

Similar Messages

  • Change logs for Z table.

    Hi All,
    I am trying  to fetch the old value and new value for the z table field.Change log is activated for the Z table. but i dont know how to fetch the change logs.
    SCU3 is the standard transaction to see the change logs for all the tables.
    Is there any table where the change logs values are maintained?
    Does anyone know how to get the change log value?
    Thanks in advance.
    Regards,
    Amruta.

    Hello,
    If for a specific set of tables no change documents are triggered by SAP you can always setup your own Change Document Object with transaction SCDO.
    Of course you need to be careful with this transactions (how big is the table data, how many changes, etc...).
    Table logging is something else, they are stored in table DBTABLOG and can be analysed via SCU3.
    For table logging you need extra system parameters to be set, they are explained in SAP Note:
    Note 1916 - Logging table changes in R/3
    Pay attention with table logging because a lot of tables are logged in DBTABLOG once you activate the parameter, this can have a major impact on performance.
    To have an idea what other tables will be logged, check tcode SE16 on table DD09L and put an 'X' in field PROTOKOLL, result will be thousands of tables.
    In your specific scenario I think it is best you go for the change documents with SCDO.
    Wim Van den Wyngaert

  • How to get change log for z-fields in VBAk(Sales order)

    Hi All,
    Please help me in this.
    My requirement is get the change log for z-fields in sales order.
    In the sales order header level we have one tab Additioanl data.
    In this we have z-fields, if we change any of the field value, it is accepting the same and updating in data base as well.
    But it is not appearing in change log<. I.e. Environment->changes.
    How to get the change log for the z-fields.
    In data element level enable the check box of change document.
    Please help me in this.
    Thanks in advance
    Jaya,G

    Hi Jaya,
    For this you need to do some coding. Here is a link which tells you, step by step procedure how to activate Change log for the Z tables.
    THe Object that you need to use for Sales Document   is VERKBELEG
    [https://wiki.sdn.sap.com/wiki/display/ABAP/Maintaining%20Change%20Log%20for%20Database%20Tables]
    Hope this helps..
    This is Primarily a Technical Consultant Job. Take his help before you make any changes.
    Thnks
    Srini

  • Creating Change Log For Transaction Code

    Hi All,
    I used to the transaction code SCDO to create the change log for a  Z table which I have created to maintain the data.
    User can run the transaction code for the Maitence View of Ztable and can make the entry.
    Now I have created a change FM ZTABLE_WRITE_DOCUMENT using ZCDO. I would like to know how to link this to a transaction code so that any changes done to the table contents will be recorded.
    Thanks & Regards,
    Nagaraj Kalbavi

    Hi Bala,
    In which program, you mean to say table Maitenance Generator program. I feel this has to be done in transaction code AUT01. But I am not sure, I just need a glance on it.
    Thanks & Regards,
    Nagaraj Kalbavi

  • Activate change logs for the table V_T007K

    Hi,
    Change log check box is activated in table and change logs is activated in system. But still I am not able to view any change logs recorded for the table V_T007K using SCU3 transaction.
    I tried by changing some data and than checked the SCu3 transaction. nothing is recorded against the table.
    Please let me know what needs to be done to capture the change logs for the changes done to the data in the table V_T007k table.
    Thanks in Advance.
    Thanks & Regards,
    Madhuri.

    Hi
    The table u mentioned V_T007k  is not a transparent table
    .its a view only for views u cant track changes.
    But only for transparent tables u can only track changes thru SCU3
    Also u can find the changes in a table from SAP TABLE
    CDHDR and CDPOS.
    if helpful reward me points.
    Regards
    Manas Ranjan Panda

  • Change Logs for TCODE -- FILE

    Hi Friends,
        Please help me in finding the change logs  for the TCODE  FILE,
        i.e  The changes made to the Logical paths
       I had tried  Utilities---->change logs , but unfortunately i cannot find any changes logs
       But there are changes made to the logical paths in my system but i cannot see them in change logs
    thanks
    chandrasekhar j

    rec/client is a profile parameter, you can view the settings in transaction RZ10.  However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value.  Also if you double-click on a parameter you can get to the full help text for its meaning.
    The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
    Hope this helps.
    Nick

  • What is the impact - Activating Change Logs for Material Classification Dta

    To activate Change Logs for Material Classification Data I must first set the flag for "Multiple Objs Allowed" for the Class Type 001 Material Class. I am curious of what the impact of setting this flag will be. Also, is there a way to measure the DASD impact of activating the Change logging for this data.
    Thankyou
    Kevin

    In addition to the performance impact the process of turning on Change Logs for Classification data will convert the tables KSSK and AUSP to use an internal SAP number as a key instead of the Material number. This will cause problems for any custom programs that access those files directly and expect the material number to be the key. This file conversion occurs during the execution of program RCCLUKA2 which is used to Flag the change logs for existing records. This can be reversed by running report RMCLINOB. Because of the above impact we decided here to NOT implement this change in production.

  • How do we chcek change Logs for any stndrd transaction

    Hi gurus,
    Are there any tables to check change Logs for any SAp standard t-code ?
    Thanks
    Kylie

    ALex ,
    For eg :if its a t-code related to Purchasing : then Purchase Order and it's corresponding item level details are retrieved.
    But i m thinking in a different way: i need to check LOGS of a t-code which might have a transport request
    following such a transport request i can get the USER details who migrtaed the changes of t-code (for eg:ME23n)
    from SAP QA to SAP PROD.
    Thanx
    Kylie
    Edited by: kylietisha on May 31, 2010 8:15 AM

  • Change Logs for customer master data in 3.1 H version

    Hello All
    Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version.  I want to be able to report based on changes made to customer master.
    I know there is a good report in 6.0 version for this- S_ALR_87012182.
    If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
    Any ideas will be appreciated.
    Hema.

    Hi,
    Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
    Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
    Regards,
    K

  • Change logs for Shopping cart

    Hi,
    Is it possible to get the change logs for a shopping cart in SRM as to who deleted a line item after approval? We are in the SRM 4 version ( classic scenario).
    The problem is that the batch job user seems to be coming up in the last update for the shopping cart and the backend PO is deleted with the RFC user name.
    Are there any tables in SRM where the change is logged? I checked CDHDR/CDPOS tables but it is difficult to get the logs for the shopping cart especially for the deleted action.
    Any clues/ideas would be appreciated.
    Regards,
    Rajesh

    Hi
    expand the shopping cart
    in the right top corner you can see
    Display Changes
    shopping cart might be deleted by BATCHRFC
    if the BUYER deleted a PO and the status will be updated in the shopping cart by BATCHRFC user.
    Muthu

  • Change logs for tcode WE20 and MN04

    Hi Gurus,
    Good day.
    Please help. does WE20 and MN04 generates change logs? If yes, please advice on how to check change logs of both transactions.
    Thanks in advance.

    I have never seen change logs for WE20.
    MN04 is creation of conditions. as conditions usually stored in own tables, the change history needs to be activated for these tables via SE11 first.

  • Change log for CRM service order

    Dear Experts,
      I've created log profile in CRM under IMG path Customer Relationship Management->Basic Functions-> Change log with protocolo " Changed document "  & segment " PRICING_I ". This log profile is attached to transaction type service order.
    Basic idea is to capture the changes made on the pricing in service order. Now with this setup where can i see the trace of changes done in service order. Is there any table that fills with the log  ? 
    Basically i'm trying to find log DB table for pricing with this setup.Can anyone pls suggest me to resolve the issue.
    Regards
    Devika.S

    Hi,
    there are no change logs for CUMULAT_H object because this is only a temporary object in CRM Order buffer. Check for example the function module CRM_CUMULAT_H_READ_OB. You will find out the this module does not read the CUMULATE_H from the DB cumulates the values by reading the item values.  Because of that you will also see that in view CRMV_OBJECTS the change document relevance is not maintained for this object.
    So you will not a change entry for CUMULAT_H in CDHDR/CDPOS. As a workaround for your requirement you can read the changes of CRMD_PRICING_I-NET_VALUE from the change document tables or write a change entry on save into a customer field and/or table.
    Regards
    Nicolai

  • Change Log for Custom fields

    Hi All,
    I need the change log for custom fields added in BP transaction codes.
    Basically, for tracking the changes of master data in CDHDR and CDPOS tables we will enable the checkbox of dataelement related to custom field.
    As for SAP fields in BP transaction code the change history is reflecting in CDHDR/CDPOS tables. i have enabled that for custom fields added to BP transaction code but i could not see the change history for such fields.
    Please let us know if iam missing any other thing?

    Hi Amit Singh,
    Apart from clicking the checkbox in dataelement...
    There are some settings need to be done by BASIS
    and some settings and entries should be made in SCOD t-code
    create entriy for change document here..
    also hv a look on below links...
    http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/fa015b493111d182b70000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/db/7a2a40ce93185de10000000a1550b0/content.htm
    Custom Table values in CDPOS and CDHDR
    scdo
    wat do these fields in scdo stand for?
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7

  • Is possible to keep a change log on a z table

    Hi..
    I made a z table which has a charge out rate and other details. This is updated via table maintenance view by the user.
    I want to know whther it is possible to get a change log, for example if the user changed the charge out rate at a particular date, to get the date, name of the user logged in and say the price it was chnaged to and the earlier price which was thr..
    If the price change details cannot be taken, is it atleast possible to get the date the change was made and the user name..
    Any help is appreciated.
    Thanks.
    Keshini

    Hi,
    If you maintain your z-table in ABAP Dictionary (SE11), via the menu Go to ->Technical Settings, you have a checkbox 'Log data changes' down left. F1 on this checkbox gives you following explanation:
                                                                                    "Log data changes                                                                               
    The logging flag defines whether changes to the data records of a table 
        should be logged. If logging is activated, every change (with UPDATE,   
        DELETE) to an existing data record by a user or an application program  
        is recorded in a log table in the database.                                                                               
    Note: Activating logging slows down accesses that change the table.     
        First of all, a record must be written in the log table for each change.
        Secondly, many users access this log table in parallel. This could cause
        lock situations even though the users are working with different        
        application tables.                                                                               
    Dependencies                                                                               
    Logging only takes place if parameter rec/client in the system profile  
        is set correctly. Setting the flag on its own does not cause the table  
        changes to be logged.                                                                               
    The existing logs can be displayed with Transaction Table history       
        (SCU3).        "                                                         
    So don't forget: activating this checkbox will only help if you also activate parameter rec/client on system level.
    Hope this helps,
    Ioana

  • Change Log for Purchase Order

    Dear all,
    Just today, we've found out that one of our buyers always change the PO quantity when the supplier deliver more than they should.
    Before we do something like lock her access or even remove her from current position, we'd like to know how often and how much is the impact of her actions.
    We know that we can see the changes from the change log for every single PO; but if we want to know the changes from several hundreds PO ... looking at the log one by one may not a good idea .. LOL ..
    Do you have any experience with this or any idea on where (the tables) I can take a look ?
    Thanks,
    Markus

    Hi Markus,
    The details of  the 'Show History' function, for the  Purcahse Order, is contained in the ADOC (header information) and the AD01 (Row information). These two tables contain the exact same information as the OPOR and POR1 (Purchase Order header and row tables).  However, the history of all marketing documents in the database is saved in this table so there is a need to filter this table based on the Purchase Order documents only.
    What I would suggest is to create a query based on the ADOC and ADO1 and filter it based on the field 'ObjType' (Field Name is 'Object type'). The object type for the Purchase Order is '22'. As each update to a document is saved in the table there is a need to distinguish each version of the document. This is done with the 'Loginstanc' field in the both the ADOC and the ADO1, so this may help you with the query. After that the query can be filtered for any field that is visible in the Purchase Orders.
    There are other childeren tables of the ADOC which you may need. To find these, when in the Query Generator, open the 'Choose from List' to obtain the list of tables. Then in the 'Find' field type the letters 'ADO' this will bring all the tables starting with 'ADO' to the top of the list.
    One final thing, each update to a document is recorded to a usersign. Obtain the user sign of the user in question by running a query on the OUSR table and look at the figure in the field 'Internal_K' for that user. This is the number that will then be visible in the field 'UserSign' in the ADOC table.
    I hope this helps
    Noreen

Maybe you are looking for